Phoenix 351, 401, 451, 551 Expert puls FDW - EWM Hightec ...

More documents

Recommendations

Info

Design and function Shielding gas supply Item Symbol Description 0 1 Pressure regulator 2 Shielding gas cylinder Figure 5-5 3 Output side of the pressure regulator 4 Cylinder valve • Place the shielding gas cylinder into the relevant cylinder bracket. • Secure the shielding gas cylinder using a securing chain. • Tighten the pressure regulator screw connection on the gas bottle valve to be gas-tight. • Tighten gas hose on pressure regulator to be gas tight. 32 099-004833-EW501 10.07.2012
Design and function MIG/MAG welding 5.10 MIG/MAG welding 5.10.1 Connection for workpiece lead NOTE Note the polarity of the welding current! Some wire electrodes (e.g. self-shielding cored wire) are welded using negative polarity. In this case, the welding current lead should be connected to the "-" welding current socket, and the workpiece lead should be connected to the "+" welding current socket. • Observe the information from the electrode manufacturer! 1 2 3 Figure 5-6 Item Symbol Description 0 1 Connection socket, "+" welding current • MIG/MAG cored wire welding: Workpiece connection 2 "-" welding current connection socket • MIG/MAG welding: Workpiece connection 3 Workpiece • Insert the plug on the workpiece lead into the "-" welding current connection socket and lock. 099-004833-EW501 10.07.2012 33
Page 1 and 2: Operating instructions Welding mach
Page 3 and 4: Contents Notes on the use of these
Page 5 and 6: Contents Notes on the use of these
Page 7 and 8: Safety instructions Explanation of
Page 9 and 10: Safety instructions General WARNING
Page 11 and 12: Safety instructions General CAUTION
Page 13 and 14: Safety instructions Transport and i
Page 15 and 16: Intended use Applications 3 Intende
Page 17 and 18: Intended use Documents which also a
Page 19 and 20: Machine description - quick overvie
Page 25 and 26: Design and function Installation CA
Page 27 and 28: Design and function Welding torch c
Page 29 and 30: Design and function Mains connectio
Page 31: Design and function Shielding gas s
Page 35 and 36: Design and function MIG/MAG welding
Page 69 and 70: Design and function Advanced functi
Page 75 and 76: Design and function TIG welding 5.1
Page 81 and 82: Design and function TIG welding Non
Page 83 and 84:
Design and function TIG welding Lat
Page 85 and 86:
Design and function MMA welding 5.1
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Design and function Interfaces 5.14
Page 95 and 96:
6 Maintenance, care and disposal Ma
Page 97 and 98:
Maintenance, care and disposal Main
Page 99 and 100:
Rectifying faults Checklist for rec
Page 101 and 102:
Rectifying faults Resetting JOBs (w
Page 103 and 104:
Rectifying faults Vent coolant circ
Page 105 and 106:
Technical data Phoenix 351, 451, 55
Page 107 and 108:
Accessories Computer communication
Page 109 and 110:
Appendix A JOB-List Job-Nr./ job-no
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
show all

Phoenix 351, 401, 451, 551 Expert puls FDW - EWM Hightec ...

Create successful ePaper yourself

Delete template?

Save as template?