SDS9800-Satellite-receiver-manual-220613.pdf (2.17MB) - Satmax

8. When return to previous menu or exit the
Dish Setup, press the EXIT button. If you
changed the data in Dish Set up, the
confirmation window will appears. If you
want to save the changes, select the YES,
If you don’t want to save the changes,
Select
the No or press the EXIT button again
※USALS
(UNIVERSAL SATELLITE AUTOMATIC LOCATION SYSTEM )
On USALS set up of Installation, First you get values of Longitude and Latitude for
your dish location.
Then you select USALS on the Switch type of Dish Setup menu.
Then Automatically the values of USALS are shown.
And the Set top box is basically entered for the value of Longitude :
11.9˚E and Latitude : 44.9˚N of “STAB”installation site(Italy)
Execute “Go to Positioner” of “Option”Menu.
Then, It moves to the location automatically, the other functions are the same as
DiSEqC1.2
- Done : Press OK button on the right screen , position of cursor will be changed to
left. In this mode Done is equals EXIT
- Set location: Press the OK button. Set My Longitude and Latitude.
- Move West-East : Press the OK button to move the motor
- Go to Position : Press the OK button to move the motor to the stored position.
- Go to Reference : Press the OK button to move the motor to the 0 position.
- Set West Limit : Press the OK button to fix West limit.
- Set East Limit : Press the OK button to fix East limit.
- Enable / Disable Limit : Press the OK button to change the limit status.
(Set West Limit & Set East Limit can be available with Disable Limit status)
18