Projectos de Normas - IPQ

Projectos de Normas 

Março 2009 

Esta publicação tem por objectivo: 

A divulgação pública dos projectos de Normas Portuguesas, Europeias e Internacionais, com vista à obtenção durante o 

período de inquérito público dos pontos de vista e contribuições nacionais que possam ser considerados na sequente 

elaboração, aprovação e homologação das Normas. 

A divulgação de propostas de novos trabalhos de normalização europeia e internacional, para que se possa obter, 

durante o período de inquérito público, os pontos de vista e as contribuições nacionais. 

Índice 

Página 

1. Projectos de normas portuguesas 

1.1 Projectos em inquérito público 2 

1.2 Projectos anulados 3 

2. Projectos de normas e propostas de estudo de novas normas do Comité Europeu de Normalização(CEN e 

do Comité Europeu para a Normalização do Ferro e do Aço (ECISS) 


2.2 Questionários preliminares 31 

2.3 Comités Técnicos do CEN 32 

3. Projectos de normas e propostas de estudo de novas normas do Comité Europeu de Normalização 

Electrotécnica (CENELEC) 


3.2 Propostas de anulação de Normas 51 

3.3 Proposta de estudo de novas normas - "Vilamoura Procedures" 52 

3.4 Questionários preliminares 53 

4. Projectos de Normas e Propostas de Estudo de Novas Normas do Comité Europeu de Normalização 

(CEN) / Comité Europeu de Normalização Electrotécnica (CENELEC) 


5. Projectos de normas do Instituto Europeu de Normalização para as Telecomunicações (ETSI) 


5.2 Propostas de anulação de Normas 57 

6. Projectos de normas e propostas de estudo de novas Normas de Organização Internacional de 

Normalização (ISO) 


6.2 Comités Técnicos da ISO 69 

7. Projectos de normas e propostas de estudo de novas normas da Comissão Electrotécnica Internacional (IEC) 


8. Projectos de normas da Organização Internacional de Normalização (ISO)/Comissão Electrotécnica 

Internacional (IEC) 


Instituto Português da Qualidade 

Rua António Gião, 2 2829-513 CAPARICA 

Tel +351 212 948 100 Fax +351 212 948 223 

Internet www.ipq.pt 

16 Março 2009

1. Projectos de Norma Portuguesa 

Os projectos de normas estão organizadas por Grupos classificativos, indicando-se a referência e o respectivo título. 

1.1 Projectos em inquérito público 

Para cada referência menciona-se a designação codificada, o título e a correspondência europeia ou internacional, 

quando exista, e a data limite para a apresentação de comentários. 

C 1450 / CT 145 

prNP 4406:2009 

Preço: 

Sistemas de gestão florestal sustentável 

Aplicação dos critérios pan-europeus para a gestão florestal 

sustentável 

Data de Início do Inquerito: 2009-03-17 

Data de Fim do Inquerito: 2009-05-17 

Lista Mensal - Projectos de Normas p. 2 de 84 16 Março 2009

1.2 Projectos Anulados 

Para cada referência menciona-se a designação, a correspondência europeia e/ou internacional, bem como o documento 

que o substitui, quando exista. 

LISTA VAZIA 


2. Projectos de Norma e propostas de estudo de novas Normas do Comité 

Europeu de Normalização (CEN) e do Comité Europeu para a Normalização 

do Ferro e do Aço (ECISS) 

Os projectos de normas e as propostas de estudo de novas normas estão organizadas por "Comités" Técnicos do CEN e 

do ECISS. 


Para cada referência menciona-se a designação codificada, o título e a data limite para a apresentação de comentários. 

prEN 15733:2009 

Services of real estate agents Requirements for the 

provision of services of real estate agents 

Data Limite: 2009-04-19 

prEN 15900:2009 

Energy efficiency services Definitions and essential 

requirements 


prEN 15907:2009 

Film identification Enhancing interoperability of 

metadata Element sets and structures 


prEN ISO 14005:2008 

Environmental management systems Guidelines for the 

phased implementation of an environmental management 

system, including the use of environmental performance 

evaluation (ISO/DIS 14005:2008) 


prEN ISO 14971:2009 

Medical devices Application of risk management to 

medical devices 

(ISO 14971:2007, Corrected version 2007-10-01) 


TC 10 

prCEN/TS 81-11:2009 

Safety rules for the construction and installation of lifts 

Basics and interpretations Part 11: Interpretations 

related to EN 81 family of standards 


TC 10 

EN 81-1:1998 /prA 3:2009 


Part 1: Electric lifts 


TC 10 

EN 81-2:1998 /prA 3:2009 


Part 2: Hydraulic lifts 


TC 10 

prEN 81-7:2009 


Part 7: Rack and pinion lifts 


TC 10 

prEN 81-21:2009 


Lifts for the transport of persons and goods Part 21: New 

passenger and goods passenger lifts in existing builiding 


TC 10 

prEN 81-43:2009 


Special lifts for the transport of persons and goods Part 

43: Lifts for cranes 


TC 10 

prEN 115-2:2009 

Safety of escalators and moving walks Part 2: Rules for 

the improvement of safety of existing escalators and 

moving walks 


TC 10 

EN 12159:2000 /prA 1:2008 

Builders hoists for persons and materials with vertically 

guided cages 


TC 12 

EN ISO 13628-1:2005 /prA 1:2008 

Petroleum and natural gas industries Design and 

operation of subsea production systems Part 1: 

General requirements and recommendations - Amendment 

1: Revised Clause 6 

(ISO 13628-1:2005/DAM 1:2008) 


TC 12 

EN ISO 13628-1:2005 /prA 2:2008 

Petroleum and natural gas industries Design and 

operation of subsea production systems Part 1: 

General requirements and recommendations - 

Amendment 2: Revised Annex L 

(ISO 13628-1:2005/DAM 2:2008) 


TC 12 

prEN ISO 13678:2009 

Petroleum and natural gas industries Evaluation and 

testing of thread compounds for use with casing, tubing, 

line pipe and drill stem elements (ISO/FDIS 13678:2009) 


TC 12 

prEN ISO 17078-3:2009 

Petroleum and natural gas industries Drilling and 

production equipment Part 3: Running tools, pulling 

tools and kick-over tools and latches for side-pocket 

mandrels (ISO/FDIS 17078-3:2009) 



TC 12 

prEN ISO 19906:2009 

Petroleum and natural gas industries Arctic offshore 

structures (ISO/DIS 19906:2009) 


TC 19 

prEN 15751:2009 

Automotive fuels Fatty acid methyl ester (FAME) fuel and 

blends with diesel fuel Determination of oxidation 

stability by accelerated oxidation method 


TC 23 

prEN 15888:2008 

Transportable gas cylinders Cylinder bundles Periodic 

inspection and testing 


TC 23 

prEN ISO 11114-3:2008 

Transportable gas cylinders Compatibility of cylinder 

and valve materials with gas contents Part 3: Autogenous 

ignition test in oxygen atmosphere 

(ISO/DIS 11114-3:2008) 


TC 33 

prCEN/TR 15894:2009 

Building hardware Door fittings for use by children, 

elderly and disabled people in domestic and public 

buildings A guide for specifiers 


TC 33 

EN 12978:2003 /prA 1:2009 

Industrial, commercial and garage doors and gates Safety 

devices for power operated doors and gates 

Requirements and test methods 


TC 33 

prEN 15887:2008 

Building hardware Uncontrolled Door Closing Devices 

for single action doors Requirements and test methods 


TC 47 

prEN 299:2009 

Oil pressure atomizing nozzles Determination of the angle 

and spray characteristics 


TC 47 

prEN ISO 23553-1:2008 

Safety and control devices for oil burners and 

oil-burning appliances Particular requirements Part 1: 

Shut-off devices for oil burners (ISO 23553-1:2007) 


TC 52 

EN 71-1:2005 /prA 7:2009 

Safety of toys Part 1: Mechanical and physical properties 


TC 52 

EN 71-1:2005 /prA 9:2009 



TC 52 

EN 71-1:2005 /prA 10:2008 



TC 52 

EN 71-1:2005 /prA 12:2008 



TC 52 

prEN 71-4:2009 

Safety of toys Part 4: Experimental sets for chemistry and 

related activities 


TC 52 

EN 71-8:2003 /prA 3:2009 

Safety of toys Part 8: Swings, slides and similar activity 

toys for indoor and outdoor family domestic use 


TC 54 

EN 13445-4:2002 /prA 4:2008 

Unfired pressure vessels Part 4: Fabrication 


TC 55 

prCEN/TR 12401:2008 

Dentistry Guidance on the classification of dental 

devices and accessories 


TC 55 

prEN ISO 3950:2009 

Dentistry Designation system for teeth and areas of the 

oral cavity 

(ISO/FDIS 3950:2009) 


TC 55 

EN ISO 7711-1:1998 /prA 1:2009 

Dental rotary instruments Diamond instruments Part 1: 

Dimensions, requirements, marking and packaging 

(ISO 7711-1:1998/FDAmd 1:2009) 


TC 55 

prEN ISO 7885:2009 

Dentistry Sterile injection needles for single use 

(ISO/DIS 7885:2009) 


TC 55 

prEN ISO 9173-2:2009 

Dentistry Extraction forceps Part 2: Functional 

designation 

(ISO/DIS 9173-2:2009) 


TC 55 

prEN ISO 11953:2009 

Dentistry The performance of hand torque instruments for 

the clinical tightening of screw-retained joints in 

endosseous dental implant systems (ISO/DIS 

11953:2009) 


TC 55 

EN ISO 16409:2006 /prA 1:2009 

Dentistry Oral hygiene products Manual interdental 

brushes 

Amendment 1 (ISO 16409:2006/DAM 1:2009) 


TC 55 

prEN ISO 27020:2009 

Dentistry Brackets and tubes for use in orthodontics 

(ISO/DIS 27020:2009) 



TC 55 

prEN ISO 28158:2009 

Dentistry Integrated dental floss holders 

(ISO/DIS 28158:2009) 


TC 55 

prEN ISO 28319:2009 

Dentistry Laser welding (ISO/DIS 28319:2009) 


TC 67 

prEN 12808-4:2008 

Grouts for tiles Part 4: Determination of shrinkage 


TC 67 

prEN 13888:2008 

Grout for tiles Requirements, evaluation of conformity, 

classification and designation 


TC 69 

prEN 593:2008 

Industrial valves Metallic butterfly valves 


TC 79 

EN 1827:1999 /prA 1:2008 

Respiratory protective devices Half masks without 

inhalation valves and with separable filters to protect 

against gases or gases and particles or particles only 

Requirements, testing, marking 


TC 98 

EN 280:2001 /prA 2:2009 

Mobile elevating work platforms Design calculations 

Stability criteria - Construction - Safety - Examination 

and tests 


TC 98 

prEN 1493:2008 

Vehicle lifts 


TC 98 

EN 1495:1997 /prA 2:2008 

Lifting platforms Mast climbing work platforms 


TC 98 

EN 1570:1998 /prA 2:2008 

Safety requirements for lifting tables 


TC 98 

EN 1756-2:2004 /prA 1:2008 

Tail lifts Platform lifts for mounting on wheeled vehicles 

- Safety requirements Part 2: Tail lifts for passengers 


TC 98 

EN 1808:1999 /prA 1:2008 

Safety requirements on suspended access equipment Design 

calculations, stability criteria, construction Tests 


TC 98 

EN 14010:2003 /prA 1:2008 

Safety of machinery Equipment for power driven parking 

of motor vehicles Safety and EMC requirements for 

design, manufacturing, erection and commissioning 

stages 


TC 102 

EN 285:2006 /prA 2:2008 

Sterilization Steam sterilizers Large sterilizers 


TC 102 

prEN 868-2:2009 

Packaging for terminally sterilized medical devices Part 

2: Sterilization wrap - Requirements and test methods 


TC 102 

prEN 868-3:2009 


3: Paper for use in the manufacture of paper bags 

(specified in EN 868-4) and in the anufacture of 

pouches and reels (specified in EN 868-5) - 



TC 102 

prEN 868-4:2009 


4: Paper bags - Requirements and test methods 


TC 102 

prEN 868-5:2009 


5: Sealable pouches and reels of porous materials and 

plastic film construction - Requirements and test 

methods 


TC 102 

prEN 868-6:2009 


6: Paper for low temperature sterilization processes - 



TC 102 

prEN 868-7:2009 


7: Adhesive coated paper for low temperature 

sterilization processes - Requirements and test methods 


TC 102 

prEN 868-8:2009 


8: Re-usable sterilization containers for steam 

sterilizers conforming to EN 285 - Requirements and 

test methods 


TC 102 

prEN 868-9:2009 


9: Uncoated nonwoven materials of polyolefines - 



TC 102 

prEN 868-10:2009 


10: Adhesive coated nonwoven materials of polyolefines 

- Requirements and test methods 


TC 102 

EN 1422:1997 /prA 1:2008 

Sterilizers for medical purposes Ethylene oxide 

sterilizers Requirements and test methods 



TC 102 

EN 13060:2004 /prA 1:2008 

Small steam sterilizers 


TC 102 

EN 13060:2004 /prA 2:2009 

Small steam sterilizers 


TC 102 

EN 14180:2003 /prA 1:2008 

Sterilizers for medical purposes Low temperature steam 

and formaldehyde sterilizers Requirements and testing 


TC 102 

EN 14180:2003 /prA 2:2009 

Sterilizers for medical purposes Low temperature steam 

and formaldehyde sterilizers Requirements and testing 


TC 102 

prEN ISO 11138-2:2008 

Sterilization of health care products Biological indicators 

Part 2: Biological indicators for ethylene oxide 

sterilization processes 

(ISO 11138-2:2006) 


TC 102 

prEN ISO 11138-3:2008 

Sterilization of health care products Biological indicators 

Part 3: Biological indicators for moist heat sterilization 

processes 

(ISO 11138-3:2006) 


TC 102 

prEN ISO 11140-1:2008 

Sterilization of health care products Chemical indicators 

Part 1: General requirements 

(ISO 11140-1:2005) 


TC 102 

prEN ISO 11140-3:2008 

Sterilization of health care products Chemical indicators 

Part 3: Class 2 indicator systems for use in the Bowie 

and Dick-type steam penetration test 

(ISO 11140-3:2007) 


TC 102 

prEN ISO 11607-1:2009 


1: Requirements for materials, sterile barrier systems 

and packaging systems 

(ISO 11607-1:2006) 


TC 102 

prEN ISO 15883-1:2009 

Washer-disinfectors Part 1: General requirements, terms 

and definitions and tests 

(ISO 15883-1:2006) 


TC 102 

prEN ISO 15883-2:2009 

Washer-disinfectors Part 2: Requirements and tests for 

washer-disinfectors employing thermal disinfection for 

surgical instruments, anaesthetic equipment, bowls, 

dishes, receivers, utensils, glassware, etc. 

(ISO 15883-2:2006) 


TC 102 

prEN ISO 15883-3:2009 


washer-disinfectors employing thermal disinfection for 

human waste containers (ISO 15883-3:2006) 


TC 102 

prEN ISO 15883-4:2009 


washer-disinfectors employing chemical disinfection 

for thermolabile endoscopes (ISO 15883-4:2008) 


TC 104 

prCEN/TS 12390-11:2009 

Testing hardened concrete Determination of the chloride 

resistance of concrete, unidirectional diffusion 


TC 104 

prEN 480-10:2009 

Admixtures for concrete, mortar and grout Test methods 

Part 10: Determination of water soluble chloride content 


TC 104 

prEN 934-2:2008 

Admixtures for concrete, mortar and grout Part 2: 

Concrete admixtures - Definitions, requirements, 

conformity, marking and labelling 


TC 104 

prEN 934-3:2009 


Admixtures for masonry mortar - Definitions, 

requirements, conformity and marking and labelling 


TC 104 

prEN 934-4:2008 


Admixtures for grout for prestressing tendons - 

Definitions, requirements, conformity, marking and 

labelling 


TC 106 

prEN 203-3:2009 

Gas heated catering equipment Part 3: Materials and parts 

in contact with food and other sanitary aspects 


TC 107 

prEN 13941:2009 

Design and installation of preinsulated bonded pipe 

systems for district heating 


TC 113 

prEN 14825:2008 

Air conditioners, liquid chilling packages and heat 

pumps, with electrically driven compressors, for space 

heating and cooling Testing and rating at part load 

conditions 


TC 113 

prEN 15879-1:2008 

Testing and rating of direct exchange ground coupled 

heat pumps with electrically driven compressors for 

space heating and/or cooling Part1: Direct 

exchange-to-water heat pumps 



TC 114 

prEN ISO 12100:2009 

Safety of machinery General principles for design, risk 

assessment and risk reduction 

(ISO/DIS 12100:2009) 


TC 114 

EN ISO 12100-1:2003 /prA 1:2009 

Safety of machinery Basic concepts, general principles 

for design Part 1: Basic terminology, methodology - 

Amendment 1 (ISO 12100-1:2003/FDAM 1:2009) 


TC 114 

EN ISO 12100-2:2003 /prA 1:2009 

Safety of machinery Basic concepts, general principles 

for design Part 2: Technical principles - Amendment 1 

(ISO 12100-2:2003/FDAM 1:2009) 


TC 119 

prEN 13044-1:2008 

Swap bodies Marking Part 1: Markings for identification 


TC 119 

prEN 13044-2:2008 

Swap bodies Marking Part 2: Markings related to rail 

operation 


TC 119 

prEN 13044-3:2008 

Swap bodies Marking Part 3: Other operational marks 


TC 121 

prCEN ISO/TR 20172:2009 

Welding Grouping systems for materials 

Europeanmaterials (ISO/DTR 20172:2009) 


TC 121 

prEN ISO 5182:2008 

Resistance welding Materials for electrodes and 

ancillary equipment 

(ISO 5182:2008) 


TC 121 

prEN ISO 7291:2008 

Gas welding equipment Pressure regulators for manifold 

systems used in welding, cutting and allied processes 

up to 30 000 kpA (300 bar) (ISO/DIS 7291:2008) 


TC 121 

prEN ISO 14171:2008 

Welding consumables Solid wire electrodes, tubular cored 

electrodes and electrode/flux combinations for submerged 

arc welding of non alloy and fine grain steels 

Classification (ISO/DIS 14171:2008) 


TC 121 

prEN ISO 14174:2008 

Welding consumables Fluxes for submerged arc welding 

and electroslag welding Classification 

(ISO/DIS 14174:2008) 


TC 121 

prEN ISO 15609-4:2009 

Specification and qualification of welding procedures 

for metallic materials Welding procedure specification 

Part 4: Laser beam welding 

(ISO/FDIS 15609-4:2009) 


TC 121 

prEN ISO 17663:2009 

Welding Quality requirements for heat treatment in 

connection with welding and allied processes 

(ISO/FDIS 17663:2009) 


TC 121 

prEN ISO 24373:2008 

Welding consumables Solid wires and rods for fusion 

welding of copper and copper alloys Classification 

(ISO 24373:2008) 


TC 121 

prEN ISO 26304:2009 


electrodes and electrode-flux combinations for submerged 

arc welding of high strength steels Classification (ISO 

26304:2008) 


TC 122 

prEN ISO 9920:2009 

Ergonomics of the thermal environment Estimation of 

thermal insulation and water vapour resistance of a 

clothing ensemble 

(ISO 9920:2007, Corrected version 2008-11-01) 


TC 123 

prEN ISO 11990-2:2008 

Lasers and laser-related equipment Determination of laser 

resistance of tracheal tubes Part 2: Tracheal tube cuffs 

(ISO/DIS 11990-2:2008) 


TC 123 

prEN ISO 21254-1:2008 

Lasers and laser-related equipment Test methods of 

laser radiation-induced damage threshold Part 1: 

Definitions and general principles (ISO/DIS 

21254-1:2008) 


TC 123 

prEN ISO 21254-2:2008 



Threshold determination (ISO/DIS 21254-2:2008) 


TC 123 

prEN ISO 21254-3:2008 

Lasers and laser-related equipment Test methods for 


Assurance of laser power (energy) handling capabilities 

(ISO/DIS 21254-3:2008) 


TC 124 

prEN 384:2008 

Timber structures Determination of characteristic values 

of mechanical properties and density 


TC 124 

prEN 408:2009 

Timber Structures Structural timber and glued laminated 

timber Determination of some physical and mechanical 

properties 



TC 124 

prEN ISO 8970:2009 

Timber structures Testing of joints made with 

mechanical fasteners Requirements for wood density 

(ISO/DIS 8970:2009) 


TC 124 

prEN 14080:2009 

Timber structures Glued laminated timber and glued 

laminated solid timber Requirements 


TC 124 

prEN 14081-2:2008 

Timber structures Strength graded structural timber with 

rectangular cross section Part 2: Machine grading; 

additional requirements for initial type testing 


TC 124 

prEN ISO 105-A01:2008 

Textiles Tests for colour fastness Part A01: General 

principles of testing 

(ISO/DIS 105-A01:2008) 


TC 126 

prEN 15657-1:2009 

Acoustic properties of building elements and of 

buildings Laboratory measurement of airborne and 

structure borne sound from building equipment Part 1: 

Simplified cases where the equipment mobilities are much 

higher than the receiver mobilities, taking wirlpool 

baths as an example 


TC 126 

prEN ISO 3382-1:2009 

Acoustics Measurement of room acoustic parameters Part 

1: Performance spaces 

(ISO/FDIS 3382-1:2009) 


TC 126 

prEN ISO 10140-1:2008 

Acoustics Laboratory measurement of sound insulation of 

building elements Part 1: Test codes 

(ISO/DIS 10140-1:2008) 


TC 126 

prEN ISO 10140-2:2008 


building elements Part 2: Measurement of airborne sound 

insulation 

(ISO/DIS 10140-2:2008) 


TC 126 

prEN ISO 10140-3:2008 


building elements Part 3: Measurement of impact sound 

insulation 

(ISO/DIS 10140-3:2008) 


TC 126 

prEN ISO 10140-4:2008 

Acoustics Laboratory measurement of sound insulation 

of building elements Part 4: Measurement procedures 

and requirements 

(ISO/DIS 10140-4:2008) 


TC 126 

prEN ISO 10140-5:2008 


building elements Part 5: Requirements for test 

facilities and equipment 

(ISO/DIS 10140-5:2008) 


TC 127 

prEN 13381-1:2008 

Test methods for determining the contribution to the fire 

resistance of structural members Part 1: Horizontal 

protective membranes 


TC 127 

prEN 13381-2:2008 


resistance of structural members Part 2: Vertical 

protective membranes 


TC 127 

prEN 13381-3:2008 


resistance of structural members Part 3: Applied 

protection to concrete members 


TC 127 

prEN 13381-4:2008 


resistance of structural members Part 4: Applied passive 

protection products to steel members 


TC 127 

prEN 13381-5:2008 



protection to concrete/profiled sheet steel composite 

member 


TC 127 

prEN 13381-6:2008 



protection to concrete filled hollow steel columns 


TC 127 

prEN 13381-7:2008 



protection to timber members 


TC 127 

prEN 15254-2:2009 

Extended application of results from fire resistance 

tests Non-loadbearing walls Part 2: Masonry and 

Gypsum Blocks 


TC 127 

prEN 15269-3:2008 

Extended application of test results for fire resistance 

and/or smoke control for door, shutter and openable 

window assemblies, including their elements of building 

hardware Part 3: Fire resistance of hinged and pivoted 

timber doorsets and openable timber framed windows 


TC 127 

prEN ISO 1182:2008 

Reaction to fire tests for building and transport 


products Non-combustibility test (ISO/DIS 1182:2008) 


TC 127 

prEN ISO 1716:2008 


products Determination of the heat of combustion 

(ISO/DIS 1716:2008) 


TC 127 

prEN ISO 9239-1:2008 

Reaction to fire tests for floorings Part 1: Determination 

of the burning behaviour using a radiant heat source 

(ISO/DIS 9239-1:2008) 


TC 127 

prEN ISO 11925-2:2009 

Reaction to fire tests Ignitability of building products 

subjected to direct impingement of flame Part 2: 

Singleflame source test 

(ISO/DIS 11925-2:2009) 


TC 132 

prEN 14121:2008 

Aluminium and aluminium alloys Aluminium sheet, strip 

and plate for electrotechnical applications 


TC 133 

prCEN/TS 14940-1:2009 

Copper and copper alloys Determination of chromium 

content Part 1: Titrimetric method 


TC 133 

prEN 12735-1:2008 

Copper and copper alloys Seamless, round copper tubes 

for air conditioning and refrigeration Part 1: Tubes for 

piping systems 


TC 133 

prEN 12735-2:2008 

Copper and copper alloys Seamless, round copper tubes 

for air conditioning and refrigeration Part 2: Tubes for 

equipment 


TC 133 

prEN 13148:2009 

Copper and copper alloys Hot-dip tinned strip 


TC 134 

prEN ISO 10833:2008 

Textile floor coverings Determination of resistance to 

damage at cut edges using the modified Vettermann 

drum test (ISO/DIS 10833:2008) 


TC 136 

prEN 13451-1:2009 

Swimming pool equipment Part 1: General safety 

requirements and test methods 


TC 138 

prEN 1330-9:2009 

Non-destructive testing Terminology Part 9: Terms used 

in acoustic emission testing 


TC 138 

prEN 13477-2:2009 

Non destructive testing acoustic emission Equipment 

Characterisation Part 2: Verification of Operating 

Characteristic 


TC 139 

prEN 13523-8:2008 

Coil coated metals Test methods Part 8: Resistance to 

salt spray (fog) 


TC 139 

prEN 13523-10:2009 


fluorescent UV light and water condensation 


TC 139 

prEN 13523-21:2009 

Coil coated metals Test methods Part 21: Evaluation of 

outdoor exposed panels 


TC 139 

prEN 13523-22:2009 

Coil coated metals Test methods Part 22: Colour 

difference - Visual comparison 


TC 139 

prEN 13523-29:2008 


environmental soiling (Dirt pick-up and striping) 


TC 139 

prEN 15773:2009 

Industrial application of powder organic coatings to hot 

dip galvanized or sherardized steel articles [duplex 

systems] Specifications, recommendations and 

guidelines 


TC 139 

prEN ISO 1513:2008 

Paints and varnishes Preparation of test samples 

(ISO/DIS 1513:2008) 


TC 139 

prEN ISO 7783:2008 

Paints and varnishes Determination of water-vapour 

transmission properties Cup method (ISO/DIS 

7783:2008) 


TC 139 

prEN ISO 8503-1:2008 

Preparation of steel substrates before application of 

paints and related products Surface roughness 

characteristics of blast-cleaned steel substrates Part 1: 

Specifications and definitions for ISO surface profile 

comparators for the assessment of abrasive 

blast-cleaned surfaces (ISO/DIS 8503-1:2008) 


TC 139 

prEN ISO 8503-2:2008 




Method for the grading of surface profile of abrasive 

blast-cleaned steel - Comparator procedure (ISO/DIS 

8503-2:2008) 


TC 139 


prEN ISO 8503-3:2008 




Method for the calibration of ISO surface profile 

comparators and for the determination of surface 

profile - Focusing microscope procedure (ISO/DIS 

8503-3:2008) 


TC 139 

prEN ISO 8503-4:2008 






profile - Stylus instrument procedure (ISO/DIS 

8503-4:2008) 


TC 139 

prEN ISO 9117-1:2009 

Paints and varnishes Drying tests Part 1: Determination 

of through-dry state and through-dry time 

(ISO/FDIS 9117-1:2009) 


TC 139 

prEN ISO 16773-3:2009 

Paints and varnishes Electrochemical impedance 

spectroscopy (EIS) on high-impedance coated specimens 

Part 3: Processing and analysis of data from dummy 

cells´ 

(ISO/FDIS 16773-3:2009) 


TC 139 

prEN ISO 16773-4:2009 


spectroscopy (EIS) on high-impedance coated specimens 

Part 4: Examples of spectra of polymer-coated 

specimens 

(ISO/FDIS 16773-4:2009) 


TC 139 

prEN ISO 28199-1:2009 

Paints and varnishes Evaluation of properties of coating 

systems related to the application process Part 1: 

Relevant vocabulary and preparation of test panels 

(ISO/FDIS 28199-1:2009) 


TC 139 

prEN ISO 28199-2:2009 


systems related to the application process Part 2: Colour 

stability, process hiding power, re-dissolving, 

overspray absorption, wetting, surface texture and 

mottling (ISO/FDIS 28199-2:2009) 


TC 139 

prEN ISO 28199-3:2009 


systems related to the application process - Part 3: 

Visual assessment of sagging, formation of bubbles, 

pinholing and hiding power 

(ISO/FDIS 28199-3:2009) 


TC 140 

prEN ISO 15193:2009 

In vitro diagnostic medical devices Measurement of 

quantities in samples of biological origin Requirements 

for content and presentation of reference measurement 

procedures 

(ISO/FDIS 15193:2009) 


TC 140 

prEN ISO 15194:2009 



for certified reference materials and the content of 

supporting documentation (ISO/FDIS 15194:2009) 


TC 142 

EN 848-3:2007 /prA 1:2009 

Safety of woodworking machines One side moulding 

machines with rotating tools Part 3: Numerically 

controlled (NC) boring and routing machines 


TC 142 

EN 860:2007 /prEN 1:2009 

Safety of woodworking machines One side thickness 

planing machines 


TC 142 

EN 861:2007 /prA 1:2009 

Safety of woodworking machines Surface planing and 

thicknessing machines 


TC 142 

EN 940:1997 /prA 1:2009 

Safety of woodworking machines Combined 

woodworking machines 


TC 142 

EN 1218-1:1999 /prA 1:2009 

Safety of woodworking machines Tenoning machines Part 

1: Single end tenoning machines with sliding table 


TC 142 

EN 1218-2:2004 /prA 1:2008 


2: Double end tenoning and/or profiling machines fed by 

chain or chains 


TC 142 

EN 1218-3:2001 /prA 1:2008 


3: Hand fed tenoning machines with sliding table for 


TC 142 

EN 1218-4:2004 /prA 2:2008 


4: Edge banding machines fed by chain(s) 


TC 142 

EN 1218-5:2004 /prA 1:2009 


5: One side profiling machines with fixed table and feed 

rollers or feed chain 


TC 142 

EN 1807:1999 /prA 1:2009 

Safety of woodworking machines Band sawing machines 


TC 142 

EN 1870-4:2001 /prA 1:2009 

Safety of woodworking machines Circular sawing 


machines Part 4: Multiblade rip sawing machines with 

manual loading and/or unloading 


TC 142 

EN 1870-5:2002 /prA 1:2009 


machines Part 5: Circular sawbenches/up-cutting 

cross-cut sawing machines 


TC 142 

EN 1870-6:2002 /prA 1:2009 


machines Part 6: Circular sawing machines for firewood 

and dual purpose circular sawing machines for 

firewood/circular saw benches, with manual loading 

and/or unloading 


TC 142 

EN 1870-7:2002 /prA 1:2009 


machines Part 7: Single blade log sawing machines with 

integrated feed table and manual loading and/or 

unloading 


TC 142 

EN 1870-8:2001 /prA 1:2009 


machines Part 8: Single blade edging circular rip 

sawing machines with power driven saw unit and manual 

loading and/or unloading 


TC 142 

EN 1870-9:2000 /prA 1:2009 

Safety of woodworking machines Circular sawing machines 

Part 9: Double blade circular sawing machines for 

cross-cutting with integrated feed and with manual 



TC 142 

EN 1870-10:2003 /prA 1:2009 


machines Part 10: Single blade automatic and 

semiautomatic up-cutting cross-cut sawing machines 


TC 142 

EN 1870-11:2003 /prA 1:2009 


machines Part 11: Semi-automatic and automatic 

horizontal cross-cut sawing machines with one saw unit 

(radial arm saws) 


TC 142 

EN 1870-12:2003 /prA 1:2009 


machines Part 12: Pendulum cross-cut sawing machines 


TC 142 

EN 1870-13:2007 /prA 1:2009 


machines Part 13: Horizontal beam panel sawing 

machines 


TC 142 

EN 1870-14:2007 /prA 1:2009 


machines Part 14: Vertical panel sawing machines 


TC 142 

EN 1870-15:2004 /prA 1:2009 


machines Part 15: Multiblade cross-cut sawing machines 

with integrated feed of the workpiece and manual 



TC 142 

EN 1870-16:2005 /prA 1:2009 


machines Part 16: Double mitre sawing machines for 

Vcutting 


TC 142 

EN 1870-17:2007 /prA 1:2009 


machines Part 17: Manual horizontal cutting cross-cut 

sawing machines with one saw unit (manual radial arm 

saws) 


TC 142 

EN 12750:2001 /prA 1:2009 

Safety of woodworking machines Four-sided moulding 

machines 


TC 142 

EN 12779:2004 /prA 1:2009 

Safety of woodworking machines Chips and dust 

extraction systems with fixed installations Safety 

related performances and safety requirements 


TC 143 

prEN 13236:2008 

Safety requirements for superabrasive products 


TC 143 

prEN 13743:2008 

Safety requirements for coated abrasive products 


TC 144 

EN 690:1994 /prA 1:2009 

Agricultural machinery Manure spreaders Safety 


TC 144 

EN 703:2004 /prA 1:2009 

Agricultural machinery Silage loading, mixing and/or 

chopping and distributing machines Safety 


TC 144 

EN 704:1999 /prA 1:2009 

Agricultural machinery Pick-up balers Safety 


TC 144 

EN 706:1996 /prA 1:2009 

Agricultural machinery Vine shoot tipping machines 

Safety 


TC 144 

EN 707:1999 /prA 1:2009 

Agricultural machinery Slurry tankers Safety 


TC 144 

EN 745:1999 /prA 1:2009 

Agricultural machinery Rotary mowers and flail-mowers 


Safety 


TC 144 

EN 908:1999 /prA 1:2009 

Agricultural and forestry machinery Reel machines for 

irrigation Safety 


TC 144 

EN 909:1998 /prA 1:2009 

Agricultural and forestry machinery Centre pivot and 

moving lateral types irrigation machines Safety 


TC 144 

EN 12965:2003 /prA 2:2009 

Tractors and machinery for agriculture and forestry Power 

take-off (PTO) drive shafts and their guards Strength 

safety 


TC 144 

EN 13118:2000 /prA 1:2009 

Agricultural machinery Potato harvesting equipment 

Safety 


TC 144 

EN 13684:2004 /prA 2:2009 

Garden equipment Pedestrian controlled lawn aerators and 

scarifiers Safety 


TC 144 

EN 14017:2005 /prA 2:2009 

Agricultural and forestry machinery Solid fertilizer 

distributors Safety 


TC 144 

prEN 15694:2009 

Agricultural and forestry tractors Passenger seat 

Requirements and test procedures 


TC 145 

prEN 422:2009 

Plastics and rubber machines Blow moulding machines 

Safety requirements 


TC 147 

EN 13001-2:2004 /prA 3:2009 

Cranes General design Part 2: Load actions 


TC 147 

EN 13157:2004 /prA 1:2009 

Cranes Safety Hand powered lifting equipment 


TC 147 

EN 14238:2004 /prA 1:2009 

Cranes Manually controlled load manipulating devices 


TC 147 

EN 14492-1:2006 /prA 1:2009 

Cranes Power driven winches and hoists Part 1: Power 

driven winches 


TC 147 

EN 14492-2:2006 /prA 1:2009 

Cranes Power driven winches and hoists Part 2: Power 

driven hoists 


TC 147 

EN 15056:2006 /prA 1:2008 

Cranes Requirements for container handling spreaders 


TC 150 

EN 1755:2000 /prA 1:2008 

Safety of industrial trucks Operation in potentially 

explosive atmospheres Use in flammable gas, vapour, 

mist and dust 


TC 151 

EN 12111:2002 /prA 1:2008 

Tunnelling machines Road headers, continuous miners 

and impact rippers Safety requirements 


TC 151 

EN 13035-3:2003 /prA 1:2009 

Machines and plants for the manufacture, treatment and 

processing of flat glass Safety requirements Part 3: 

Cutting machines 


TC 151 

EN 13042-2:2004 /prA 1:2008 


processing of hollow glass Safety requirements Part 2: 

Handling machines for feeding 


TC 151 

EN 13042-3:2007 /prA 1:2008 



IS machines 


TC 151 

EN 13042-5:2003 /prA 1:2008 



Presses 


TC 153 

EN 1974:1998 /prA 1:2009 

Food processing machinery Slicing machines Safety and 

hygiene requirements 


TC 153 

EN 12041:2000 /prA 1:2009 

Food processing machinery Moulders Safety and hygiene 

requirements 


TC 153 

EN 12505:2000 /prA 1:2009 

Food processing machinery Centrifugal machines for 

processing edible oils and fats Safety and hygiene 

requirements 


TC 154 

prEN 933-8:2008 

Tests for geometrical properties of aggregates Part 8: 

Assessment of fines - Sand equivalent test 


TC 154 

prEN 933-9:2008 


Assessment of fines - Methylene blue test 



TC 154 

prEN 933-10:2008 


Assessment of fines - Grading of filler aggregates (air jet 

sieving) 


TC 154 

prEN 1097-8:2008 

Tests for mechanical and physical properties of 

aggregates Part 8: Determination of the polished stone 

value 


TC 154 

prEN 13383-1:2009 

Armourstone Part 1: Specification 


TC 154 

prEN 13383-2:2009 

Armourstone Part 2: Test methods 


TC 155 

prEN 1555-1:2008 

Plastics piping systems for the supply of gaseous fuels 

Polyethylene (PE) Part 1: General 


TC 155 

prEN 1555-2:2008 


Polyethylene (PE) Part 2: Pipes 


TC 155 

prEN 1555-3:2008 


Polyethylene (PE) Part 3: Fittings 


TC 155 

prEN 1555-4:2008 


Polyethylene (PE) Part 4: Valves 


TC 155 

prEN 1555-5:2008 


Polyethylene (PE) Part 5: Fitness for purpose of the 

system 


TC 156 

prEN 15871:2008 

Ventilation for buildings Fire resisting duct sections 


TC 156 

prEN ISO 13349:2008 

Fans Vocabulary and definitions of categories 

(ISO/DIS 13349:2008) 


TC 161 

prEN 12568:2008 

Foot and leg protectors Requirements and test methods for 

toecaps and penetration-resistant inserts 


TC 162 

EN 13034:2005 /prA 1:2008 

Protective clothing against liquid chemicals Performance 

requirements for chemical protective suits offering 

limited protective performance against liquid chemicals 

(Type 6 equipment) 


TC 162 

EN 14605:2005 /prA 1:2008 

Protective clothing against liquid chemicals Performance 

requirements for clothing with liquid-tight (Type 3) or 

spray-tight (Type 4) connections, including items 

providing protection to parts of the body only (Types PB 

[3] and PB [4]) 


TC 162 

prEN ISO 10862:2009 

Small craft Quick release system for trapeze harness 

(ISO/FDIS 10862:2009) 


TC 162 

EN ISO 13982-1:2004 /prA 1:2009 

Protective clothing for use against solid particulates 

Part 1: Performance requirements for chemical 

protective clothing providing protection to the full 

body against airborne solid particulates (type 5 

clothing) Amendment 1 (ISO 13982-1:2004/DAM 

1:2009) 


TC 163 

prEN 31:2009 

Wash basins Connecting dimensions 


TC 163 

prEN 33:2009 

WC pans and WC suites Connecting dimensions 


TC 164 

prEN 806-4:2009 

Specifications for installations inside buildings 

conveying water for human consumption Part 4: 

Installation 


TC 164 

prEN 937:2009 

Chemicals used for treatment of water intended for 

human consumption Chlorine 


TC 164 

prEN 973:2009 

Chemicals used for treatment of water intended for 

human consumption Sodium chloride for regeneration of 

ion exchangers 


TC 165 

prEN 12566-6:2008 

Small wastewater treatment systems for up to 50 PT Part 

6: Prefabricated treatment units for septic tank effluent 


TC 165 

prEN 15855:2008 

Classification and performance characteristics of 

techniques for renovation and repair of drains and sewers 


TC 166 

prEN 1457-1:2008 

Chimneys Clay/ceramic flue liners Part 1: Flue liners 

operating under dry conditions - Requirements and test 

methods 



TC 166 

prEN 1457-2:2008 

Chimneys Clay ceramic flue liners Part 2: Flue liners 

operating under wet conditions - Requirements and test 

methods 


TC 166 

prEN 1856-1:2008 

Chimneys Requirements for metal chimneys Part 1: 

System chimney products 


TC 166 

prEN 1856-2:2008 

Chimneys Requirements for metal chimneys Part 2: Metal 

flue liners and connecting flue pipes 


TC 166 

prEN 1859:2008 

Chimneys Metal chimneys Test methods 


TC 169 

EN 1837:1999 /prA 1:2009 

Safety of machinery Integral lighting of machines 


TC 170 

prEN ISO 8596:2009 

Ophthalmic optics Visual acuity testing Standard 

optotype and its presentation 

(ISO/FDIS 8596:2009) 


TC 170 

prEN ISO 11981:2009 

Ophthalmic optics Contact lenses and contact lens care 

products Determination of physical compatibility of 

contact lens care products with contact lenses 

(ISO/FDIS 11981:2009) 


TC 170 

prEN ISO 15004-1:2008 

Ophthalmic instruments Fundamental requirements and 

test methods Part 1: General requirements applicable to 

all ophthalmic instruments 

(ISO 15004-1:2006 


TC 170 

prEN ISO 15752:2009 

Ophthalmic instruments Endoilluminators Fundamental 

requirements and test methods for optical radiation 

safety 

(ISO/DIS 15752:2009 


TC 175 

prEN 1533:2008 

Wood and parquet flooring Determination of bending 

strength under static load Test methods 


TC 175 

prEN 13226:2008 

Wood flooring Solid parquet elements with grooves 

and/or tongues 


TC 175 

prEN 15912:2009 

Energy efficiency services Definitions and essential 

requirements 


TC 180 

prEN 525:2009 

Non-domestic direct gas-fired forced convection air 

heaters for space heating not exceeding a net heat input 

of 300 kW 


TC 181 

EN 12864:2001 /prA 3:2009 

Low-pressure, non adjustable regulators having a maximum 

outlet pressure of less than or equal to 200 mbar, with a 

capacity of less than or equal to 4 kg/h, and their 

associated safety devices for butane, propane or their 

mixtures 


TC 184 

prA 623-5:2008 

Advanced technical ceramics Monolithic ceramics - 

General and textural properties Part 5: Determination of 

phase volume fraction by evaluation of micrographs 


TC 184 

prEN 820-4:2008 

Advanced technical ceramics Thermomechanical properties 

of monolithic ceramics Part 4: Determination of flexural 

creep deformation at elevated temperatures 


TC 184 

prEN 820-5:2008 

Advanced technical ceramics Thermomechanical properties 

of monolithic ceramics Part 5: Determination of elastic 

moduli at elevated temperatures 


TC 184 

prEN 843-6:2009 

Advanced technical ceramics Mechanical properties of 

monolithic ceramics at room temperature Part 6: Guidance 

for fractographic investigation 


TC 184 

prEN 1006:2008 

Advanced technical ceramics Monolithic ceramics Guidance 

on the selection of test pieces for the evaluation of 

properties 


TC 184 

prEN 1071-9:2008 

Advanced technical ceramics Methods of test for ceramic 

coatings Part 9: Determination of fracture strain 


TC 184 

prEN 1071-10:2008 


coatings Part 10: Determination of coating thickness by 

cross sectioning 


TC 184 

prEN 10871-10:2008 


coatings Part 10: Determination of coating thickness by 

cross sectioning 


TC 184 

prEN 14232:2009 

Advanced technical ceramics Terms, definitions and 


abbreviations 


TC 186 

EN 746-1:1997 /prA 1:2009 

Industrial thermoprocessing equipment Part 1: Common 

safety requirements for industrial thermoprocessing 

equipment 


TC 186 

EN 746-3:1997 /prA 1:2008 

Industrial thermoprocessing equipment Part 3: Safety 

requirements for the generation and use of atmosphere 

gases 


TC 186 

EN 1547:2001 /prA 1:2008 

Industrial thermoprocessing equipment Noise test code 

for industrial thermoprocessing equipment including its 

ancillary handling equipment 


TC 186 

prEN ISO 225:2009 

Fasteners Bolts, screws, studs and nuts Symbols and 

designations of dimensions 

(ISO/DIS 225:2009) 


TC 187 

prEN ISO 1927-2:2008 

Unshaped refractory materials Part 2: Sampling for 

testing 

(ISO/DIS 1927-2:2008) 


TC 187 

prEN ISO 1927-3:2008 

Unshaped refractory materials Part 3: Characterization as 

received 

(ISO/DIS 1927-3:2008) 


TC 187 

prEN ISO 1927-4:2008 

Unshaped refractory materials Part 4: Determination of 

consistency of castables 

(ISO/DIS 1927-4:2008) 


TC 187 

prEN ISO 1927-5:2008 

Unshaped refractory materials Part 5: Preparation and 

treatment of test pieces 

(ISO/DIS 1927-5:2008) 


TC 187 

prEN ISO 1927-6:2008 

Unshaped refractory materials Part 6: Measurement of 

physical properties 

(ISO/DIS 1927-6:2008) 


TC 187 

prEN ISO 1927-7:2008 

Unshaped refractory materials Part 7: Tests on 

pre-formed shapes 

(ISO/DIS 1927-7:2008) 


TC 187 

prEN ISO 1927-8:2008 


complementary properties 

(ISO/DIS 1927-8:2008) 


TC 192 

prEN 1147:2008 

Portable ladders for fire service use 


TC 192 

prEN 15767-1:2009 

Portable equipment for projecting extinguishing agents 

supplied by fire fighting pumps Portable monitors Part 

1: General requirements for portable monitor assemblies 


TC 192 

prEN 15767-2:2009 



2: Water nozzles 


TC 192 

prEN 15767-3:2008 



3: Foam devices 


TC 192 

prEN 15889:2008 

Fire-fighting hoses Test methods 


TC 193 

EN 13999-3:2007 /prA 1:2008 

Adhesives Short term method for measuring the emission 

properties of low-solvent or solvent-free adhesives 

after application Part 3: Determination of volatile 

aldehydes 


TC 193 

EN 13999-4:2007 /prA 1:2008 

Adhesives Short term method for measuring the emission 

properties of low-solvent or solvent-free adhesives 

after application Part 4: Determination of volatile 

diisocyanates 


TC 197 

EN 809:1998 /prA 1:2009 

Pumps and pump units for liquids Common safety 

requirements 


TC 197 

EN 12162:2001 /prA 1:2008 

Liquid pumps Safety requirements Procedure for 

hydrostatic testing 


TC 197 

prEN ISO 20361:2008 

Liquid pumps and pump units Noise test code Grades 2 

and 3 of accuracy 

(ISO 20361:2007) 


TC 201 

EN 930:1997 /prA 2:2009 

Footwear, leather and imitation leather goods 

manufacturing machines Roughing, scouring, polishing 

and trimming machines Safety requirements 



TC 201 

EN 931:1997 /prA 2:2009 

Footwear manufacturing machines Lasting machines 



TC 201 

EN 12044:2005 /prA 1:2009 


manufacturing machines Cutting and punching machines 



TC 201 

EN 12203:2003 /prA 1:2009 


manufacturing machines Shoe and leather presses Safety 

requirements 


TC 201 

EN 12387:2005 /prA 1:2009 


manufacturing machines Modular shoe repair equipment 



TC 201 

EN 12545:2000 /prA 1:2008 


manufacturing machines Noise test code Common 

requirements 


TC 201 

EN 12653:1999 /prA 2:2009 

Footwear, leather and imitation leather manufacturing 

machines Nailing machines Safety requirements 


TC 203 

EN 598:2007 /prA 1:2009 

Ductile iron pipes, fittings, accessories and their joints 

for sewerage applications Requirements and test methods 


TC 205 

prCEN/TR 15831:2008 

Method for testing compression in medical hosiery 


TC 205 

EN 12470-1:2000 /prA 1:2009 

Clinical thermometers Part 1: Metallic liquid-in-glass 

thermometers with maximum device 


TC 205 

EN 12470-2:2000 /prA 1:2009 

Clinical thermometers Part 2: Phase change type (dot 

matrix) thermometers 


TC 205 

EN 12470-3:2000 /prA 1:2009 

Clinical thermometers Part 3: Performance of compact 

electrical thermometers (non-predictive and predictive) 

with maximum device 


TC 205 

EN 12470-4:2000 /prA 1:2009 

Clinical thermometers Part 4: Performance of electrical 

thermometers for continuous measurement 


TC 205 

EN 13795-1:2002 /prA 1:2009 

Surgical drapes, gowns and clean air suits, used as 

medical devices, for patients, clinical staff and 

equipment 

Part 1: General requirements for manufacturers, 

processors and products 


TC 205 

EN 13795-2:2004 /prA 1:2009 


medical devices for patients, clinical staff and equipment 

Part 2: Test methods 


TC 205 

EN 13795-3:2006 /prA 1:2009 


medical devices for patients, clinical staff and equipment 

Part 3: Performance requirements and performance 

levels 


TC 205 

EN 13867:2002 /prA 1:2009 

Concentrates for haemodialysis and related therapies 


TC 205 

prEN ISO 10555-1:2008 

Sterile, single-use intravascular catheters Part 1: 

General requirements 

(ISO 10555-1:1995, including Amd 1:1999 and Amd 

2:2004) 


TC 206 

prEN ISO 10993-1:2009 

Biological evaluation of medical devices Part 1: 

Evaluation and testing 

(ISO 10993-1:2003) 


TC 206 

prEN ISO 10993-5:2009 

Biological evaluation of medical devices Part 5: Tests for 

in vitro cytotoxicity 

(ISO/FDIS 10993-5:2009) 


TC 206 

prEN ISO 10993-10:2008 

Biological evaluation of medical devices Part 10: Tests 

for irritation and delayed-type hypersensitivity 

(ISO 10993-10:2002, including Amd 1:2006) 


TC 206 

prEN ISO 10993-11:2008 

Biological evaluation of medical devices Part 11: Tests 

for systemic toxicity 

(ISO 10993-11:2006) 


TC 206 

prEN ISO 10993-12:2008 

Biological evaluation of medical devices Part 12: Sample 

preparation and reference materials 

(ISO 10993-12:2007) 


TC 206 

prEN ISO 10993-13:2008 


Identification and quantification of degradation 

products from polymeric medical devices 


(ISO 10993-13:1998) 


TC 206 

prEN ISO 10993-14:2008 


Identification and quantification of degradation 

products from ceramics 

(ISO 10993-14:2001) 


TC 206 

prEN ISO 10993-15:2009 


Identification and quantification of degradation products 

from metals and alloys 

(ISO 10993-15:2000) 


TC 206 

prEN ISO 10993-16:2008 


Toxicokinetic study design for degradation products and 

leachables 

(ISO 10993-16:1997) 


TC 206 

prEN ISO 10993-17:2008 


Establishment of allowable limits for leachable 

substances 

(ISO 10993-17:2002) 


TC 206 

prEN ISO 10993-18:2008 


Chemical characterization of materials 

(ISO 10993-18:2005) 


TC 207 

prEN 527-1:2008 

Office furniture Work tables and desks Part 1: 

Dimensions 


TC 211 

prEN ISO 389-9:2009 

Acoustics Reference zero for the calibration of 

audiometric equipment Part 9: Preferred test conditions 

for the determination of reference hearing threshold 

levels 

(ISO/FDIS 389-9:2009) 


TC 213 

prEN 15895-1:2009 

Cartridge operated hand-held tools Safety requirements 

Part 1: Fixing and hard making tools 


TC 215 

EN 794-3:1998 /prA 2:2009 

Lung ventilators Part 3: Particular requirements for 

emergency and transport ventilators 


TC 215 

EN 1282-2:2005 /prA 1:2009 

Tracheostomy tubes Part 2: Paediatric tubes 

(ISO 5366-3:2001, modified) 


TC 215 

EN 1782:1998 /prA 1:2009 

Tracheal tubes and connectors 


TC 215 

EN 1820:2005 /prA 1:2009 

Anaesthetic reservoir bags (ISO 5362:2000, modified) 


TC 215 

EN 12342:1998 /prA 1:2009 

Breathing tubes intended for use with anaesthetic 

apparatus and ventilators 


TC 215 

EN 13544-1:2007 /prA 1:2009 

Respiratory therapy equipment - Part 1: Nebulizing 

systems and their components 


TC 215 

EN 13544-2:2002 /prA 1:2009 

Respiratory therapy equipment Part 2: Tubing and 

connectors 


TC 215 

EN 13544-3:2001 /prA 1:2009 

Respiratory therapy equipment Part 3: Air entrainment 

devices 


TC 215 

prEN 15908:2009 

Anaesthetic and respiratory equipment 

Non-interchangeable screw-threaded (NIST) low-pressure 

connectors for medical gases 


TC 215 

prEN 15908:2009 





TC 215 

EN ISO 7396-1:2007 /prA 2:2009 

Medical gas pipeline systems Part 1: Pipeline systems 

for compressed medical gases and vacuum 

Amendment 2 (ISO 7396-1:2007/DAM 2:2009) 


TC 215 

prEN ISO 10833:2008 

Anaesthetic and respiratory equipment Compatibility 

with oxygen 

(ISO/DIS 15001:2008) 


TC 216 

prEN 13623:2008 

Chemical disinfectants and antiseptics Quantitative 

suspension test for the evaluation of bactericidal 

activity against Legionella pneumophila of chemical 

disinfectants for aqueous systems Test method and 

requirements (phase 2, step 1) 


TC 218 

prEN 13765:2008 

Thermoplastic multi-layer (non-vulcanized) hoses and 

hose assemblies for the transfer of ydrocarbons, 

solventsand chemicals Specification 


TC 218 


prEN 13766:2008 

Thermoplastic multi-layer (non-vulcanized) hoses and hose 

assemblies for the transfer of liquid petroleum gas and 

liquefied natural gas Specification 


TC 221 

EN 13617-1:2004 /prA 1:2008 

Petrol filling stations Part 1: Safety requirements for 

construction and performance of metering pumps, 

dispensers and remote pumping units 


TC 226 

prEN 12899-6:2008 

Fixed vertical road traffic signs Part 6: Visual 

performance of retroreflective sheeting materials 


TC 227 

prCEN/TS 13036-2:2009 

Road and airfield surface characteristics Test methods 

Part 2: Assessment of the skid resistance of a road 

pavement surface by the use of dynamic measuring 

systems 


TC 227 

prCEN/TS 15901-1:2009 

Road and airfield surface characteristics Part 1: 

Procedure for determining the skid resistance of a 

pavement surface using a device with longitudinal fixed 

slip ratio (LFCS): RoadSTAR 


TC 227 

prCEN/TS 15901-2:2009 



pavement surface using a device with longitudinal 

controlled slip (LFCRNL): ROAR (Road Analyser and 

Recorder of Norsemeter) 


TC 227 

prCEN/TS 15901-3:2009 




controlled slip (LFCA): The ADHERA 


TC 227 

prCEN/TS 15901-4:2009 


Procedure for determining the skid resistance of 

pavements using a device with longitudinal controlled 

slip (LFCT): Tatra Runway Tester (TRT) 


TC 227 

prCEN/TS 15901-5:2009 




controlled slip (LFCRDK): ROAR (Road Analyser and 

Recorder of 


TC 227 

prCEN/TS 15901-6:2009 



pavement surface by measurement of the sideway force 

coefficient (SFCs): SCRIM 


TC 227 

prCEN/TS 15901-7:2009 



pavement surface using a device with longitudinal fixed 

slip ratio (LFCG): the GripTester(r) 


TC 227 

prCEN/TS 15901-8:2009 



pavement surface by measurement of the sideway-force 

coefficient (SFCD): SKM 


TC 227 

prCEN/TS 15901-9:2009 



pavement surface by measurement of the longitudinal 

friction coefficient (LFCD): DWWNL skid resistance 

trailer 


TC 227 

prCEN/TS 15901-10:2009 




block measurement (LFCSK): the Skiddometer BV-8 


TC 227 

prEN 12697-47:2009 

Bituminous mixtures Test methods for hot mix asphalt 

Part 47: Determination of the ash content of lake asphalt 


TC 227 

prEN 14188-4:2009 

Joint fillers and sealants Part 4: Specifications for 

primers to be used with joint sealants 


TC 227 

prEN 15466-1:2009 

Primers for cold and hot applied joint sealants Part 1: 

Determination of homogeneity 


TC 227 

prEN 15466-2:2009 

Primers for cold and hot applied joint sealants Part 2: 

Determination of resistance against alkali 


TC 229 

EN 13693:2004 /prA 1:2008 

Precast concrete products Special roof elements 


TC 230 

prCEN ISO/TR 15462:2008 

Water quality Selection of tests for biodegradability 

(ISO/TR 15462:2006) 


TC 230 

prEN ISO 11885:2008 

Water quality Determination of selected elements by 

inductively coupled plasma optical emission 

spectrometry 

(ICP-OES) (ISO 11885:2007) 



TC 230 

prEN ISO 23913:2008 

Water quality Determination of chromium(VI) Method 

using flow analysis (FIA and CFA) and spectrometric 

detection 

(ISO 23913:2006) 


TC 232 

EN 1012-2:1996 /prA 1:2009 

Compressors and vacuum pumps Safety requirements 

Part 2: Vacuum pumps 


TC 234 

prEN 15001-1:2009 

Gas Infrastructure Gas installation pipework with an 

operating pressure greater than 0,5 bar for industrial 

installations and greater than 5 bar for industrial and 

non-industrial installations Part 1: Detailed functional 

requirements for design, materials, construction, 

inspection and testing 


TC 241 

EN 520:2004 /prA 1:2009 

Gypsum plasterboards Definitions, requirements and test 

methods 


TC 241 

EN 14566:2008 /prA 1:2009 

Mechanical fasteners for gypsum plasterboard systems 

Definitions, requirements and test methods 


TC 241 

EN 15283-1:2008 /prA 1:2009 

Gypsum boards with fibrous reinforcement Definitions, 

requirements and test methods Part 1: Gypsum boards 

with mat reinforcement 


TC 241 

EN 15283-2:2008 /prA 1:2009 

Gypsum boards with fibrous reinforcement Definitions, 

requirements and test methods Part 2: Gypsum fibre 

board 


TC 246 

prEN 14618:2008 

Agglomerated stone Terminology and classification 


TC 247 

prEN 14908-6:2009 





TC 247 

EN ISO 16484-5:2008 /prA 1:2008 

Building automation and control systems Part 5: Data 

communication protocol - Amendment 1 

(ISO 16484-5:2008/FDAM 1:2008) 


TC 248 

prEN ISO 105-B07:2009 

Textiles Tests for colour fastness Part B07: Colour fastness 

to light of textiles wetted with artificial perspiration 

(ISO/FDIS 105-B07:2009) 


TC 248 

prEN ISO 105-C06:2008 

Textiles Tests for colour fastness Part C06: Colour 

fastness to domestic and commercial laundering 

(ISO/DIS 105-C06:2008) 


TC 248 

prEN ISO 105-C08:2009 

Textiles Tests for colour fastness Part C08: Colour 

fastness to domestic and commercial laundering using a 

non-phosphate reference detergent incorporating a low 

temperature bleach activator (ISO/DIS 105-C08:2009) 


TC 248 

prEN ISO 105-E01:2009 

Textiles Tests for colour fastness Part E01: Colour 

fastness to water 

(ISO/DIS 105-E01:2009) 


TC 248 

prEN ISO 105-E03:2009 


fastness to chlorinated water (swimming-pool water) 

(ISO/DIS 105-E03:2009) 


TC 248 

prEN ISO 105-E07:2009 


fastness to spotting by water 

(ISO/DIS 105-E07:2009 


TC 248 

prEN ISO 105-E09:2009 


fastness to boiling water 

(ISO/DIS 105-E09:2009) 


TC 248 

prEN ISO 105-E12:2009 


fastness to alkaline milling 

(ISO/DIS 105-E12:2009) 


TC 248 

prEN ISO 12952-1:2008 

Textiles Assessment of the ignitability of bedding items 

Part 1: Ignition source: smouldering cigarette 

(ISO/DIS 12952-1:2008) 


TC 248 

prEN ISO 12952-3:2008 


Part 3: Ignition source: match flame equivalent 

(ISO/DIS 12952-3:2008) 


TC 249 

prEN 438-9:2008 

High-pressure decorative laminates (HPL) 

Sheets based on thermosetting resins (usually called 

laminates) Part 9: Classification and specifications for 

alternative core laminates 


TC 249 

prEN 12613:2009 

Plastics warning devices for underground cables and 

pipelines with visual characteristics 



TC 249 

prEN 13245-1:2008 

Plastics Unplasticized poly(vinyl chloride) (PVC-U) 

profiles for building applications Part 1: Designation of 

PVC-U profiles 


TC 249 

prEN 13245-3:2008 

Plastics Unplasticized poly(vinyl chloride) (PVC-U) 

profiles for building applications Part 3: Designation of 

PVC-UE profiles 


TC 249 

prEN ISO 179-1:2008 

Plastics Determination of Charpy impact properties Part 

1: Non-instrumented impact test 

(ISO/DIS 179-1:2008) 


TC 249 

prEN ISO 527-5:2009 

Plastics Determination of tensile properties Part 5: Test 

conditions for unidirectional fibre-reinforced plastic 

composites 

(ISO/FDIS 527-5:2009) 


TC 249 

prEN ISO 844:2009 

Rigid cellular plastics Determination of compression 

properties 

(ISO 844:2007) 


TC 249 

prEN ISO 845:2009 

Cellular plastics and rubbers Determination of apparent 

density 

(ISO 845:2006) 


TC 249 

prEN ISO 1043-1:2008 

Plastics Symbols and abbreviated terms Part 1: Basic 

polymers and their special characteristics 

(ISO/DIS 1043-1:2008) 


TC 249 

prEN 1043-2:2008 

Plastics Symbols and abbreviated terms Part 2: Fillers 

and reinforcing materials 

(ISO/DIS 1043-2:2008) 


TC 249 

prEN ISO 1874-1:2008 

Plastics Polyamide (PA) moulding and extrusion 

materials Part 1: Designation (ISO/DIS 1874-1:2008) 


TC 249 

prEN ISO 1889:2009 

Reinforcement yarns Determination of linear density 

(ISO/FDIS 1889:2009) 


TC 249 

prEN ISO 1890:2009 

Reinforcement yarns Determination of twist 

(ISO/FDIS 1890:2009) 


TC 249 

EN ISO 2440:1999 /prA 1:2008 

Flexible and rigid cellular polymeric materials 

Accelerated ageing tests Amendment 1 (ISO 

2440:1999/DAM 1:2008) 


TC 249 

EN ISO 11161:2007 /prA 1:2008 

Safety of machinery Integrated manufacturing systems 

- Basic requirements Amendment 1 (ISO 

11161:2007/DAM 1:2008) 


TC 249 

prEN ISO 14855-2:2009 

Determination of the ultimate aerobic biodegradability 

of plastic materials under controlled composting 

conditions Method by analysis of evolved carbon dioxide Part 2: 

Gravimetric measurement of carbon dioxide evolved in a 

laboratory-scale test 

(ISO 14855-2:2007) 


TC 249 

prEN ISO 15512:2009 

Plastics Determination of water content 

(ISO 15512:2008) 


TC 249 

prEN ISO 22088-5:2009 

Plastics Determination of resistance to environmental 

stress cracking (ESC) Part 5: Constant tensile 

deformation method 

(ISO 22088-5:2006) 


TC 249 

prEN ISO 22088-6:2009 

Plastics Determination of resistance to environmental 

stress cracking (ESC) Part 6: Slow strain rate method 

(ISO 22088-6:2006) 


TC 251 

prEN ISO 10781:2009 

Health informatics HL7 Electronic health record system 

functional model, release 1 

(ISO/DIS 10781:2009) 


TC 251 

prEN ISO 21091:2008 

Health informatics Directory services for security, 

communications and identification of professional and 

patients 

(ISO/DIS 21091:2008) 


TC 254 

EN 13707:2004 /prA 1:2008 

Flexible sheets for waterproofing Reinforced bitumen 

sheets for roof waterproofing Definitions and 

characteristics 


TC 256 

prEN 13230-1:2009 

Railway applications Track - Concrete sleepers and 

bearers Part 1: General requirements 


TC 256 

prEN 13230-2:2009 


bearers Part 2: Prestressed monoblock sleepers 



TC 256 

prEN 13230-3:2009 


bearers Part 3: Twin-block reinforced sleepers 


TC 256 

prEN 13230-4:2009 


bearers Part 4: Prestressed bearers for switches and 

crossings 


TC 256 

prEN 13230-5:2009 


bearers Part 5: Special elements 


TC 256 

prEN 13749:2008 

Railway applications Wheelsets and bogies Method of 

specifying the structural requirements of bogie frames 


TC 256 

prEN 14033-1:2008 

Railway applications Track - Railbound construction 

and maintenance machines Part 1: Technical 

requirements for running 


TC 256 

EN 14067-4:2005 /prA 1:2008 

Non active surgical implants Particular requirements for 

cardiac and vascular implants Part 4: Requirements and 

test procedures for aerodynamics on open track 


TC 256 

prEN 14531-6:2009 

Railway applications 

Methods for calculation of stopping and slowing 

distances and immobilisation braking Part 6: Step by step 

calculations for train sets or single vehicles 


TC 256 

prEN 15220-2:2008 

Railway applications Brake indicators Part 2: Electrical 

operation brake indicators 


TC 256 

prEN 15610:2009 

Railway applications Noise emission Rail roughness 

measurement related to noise generation 


TC 256 

prEN 15663:2009 

Railway applications Definition of vehicle reference 

masses 


TC 256 

prEN 15877-1:2009 

Railway applications Marking on railway vehicles Part 

1: Freight wagons 


TC 256 

prEN 15892:2009 

Railway applications Noise Emission Measurement of 

noise inside driver's cab 


TC 260 

prEN 15905:2009 

Fertilizers Determination of 3-methylpyrazole (MP) 

using high-performance liquid chromatography (HPLC) 


TC 260 

prEN 15909:2009 

Fertilizers Determination of calcium and formate in 

calcium foliar fertilizers 


TC 261 

prEN 12374:2009 

Packaging Flexible tubes Terminology 


TC 261 

prEN 13698-2:2009 

Pallet production specification Part 2: Construction 

specification for 1000 mm x 1200 mm flat wooden 

pallets 


TC 261 

prEN 14634:2009 

Glass packaging 26 H 180 crown finish Dimensions 


TC 261 

prEN 14635:2009 

Glass packaging 26 H 126 crown finish Dimensions 


TC 261 

prEN 15766:2009 

Packaging Flexible aluminium tubes Test methods to 

determine the polymerization of the internal coating with 

acetone 


TC 261 

prEN 15904:2009 

Glass packaging Standard tolerances for flaconnage 


TC 262 

prEN 15711:2009 

Vitreous and porcelain enamels Glass lined flanged steel 

pipes and flanged steel fittings Quality requirements 


TC 262 

prEN ISO 1461:2009 

Hot dip galvanized coatings on fabricated iron and steel 

articles Specifications and test methods 

(ISO/FDIS 1461:2009) 


TC 262 

prEN ISO 2080:2008 

Metallic and other inorganic coatings Surface treatment, 

metallic and other inorganic coatings Vocabulary 

(ISO 2080:2008) 


TC 263 

prEN 1047-2:2009 

Secure storage units Classification and methods of test 

for resistance to fire Part 2: Data rooms and data 

container 


TC 264 

prEN 1911:2008 


Stationary source emissions Determination of mass 

concentration of gaseous chlorides expressed as HCl 

Standard reference method 


TC 269 

prEN 12953-6:2008 

Shell Boilers Part 6: Requirements for equipment for the 

boiler 


TC 271 

EN 1953:1998 /prA 1:2009 

Atomising and spraying equipment for coating materials 



TC 271 

EN 12215:2004 /prA 1:2009 

Coating plants Spray booths for application of organic 

liquid coating materials Safety requirements 


TC 275 

prCEN/TS 15606:2009 

Foodstuffs Determination of acesulfame-K, aspartame, 

neohesperidine-dihydrochalcone and saccharin High 

performance liquid chromatographic method 


TC 275 

prEN 13751:2008 

Foodstuffs Detection of irradiated food using 

photostimulated luminescenc 


TC 275 

prEN 14132:2008 

Foodstuffs Determination of ochratoxin A in barley 

and roasted coffee HPLC method with immunoaffinity 

column clean-up 


TC 275 

prEN 14133:2008 

Foodstuffs Determination of ochratoxin A in wine and 

beer HPLC method with immunoaffinity column 

clean-up 


TC 275 

prEN 14166:2009 

Foodstuffs Determination of vitamin B6 by 

microbiological assay 


TC 275 

prEN 15607:2009 

Foodstuffs Determination of d-biotin by HPLC 


TC 275 

prEN 15652:2009 

Foodstuffs Determination of niacin by HPLC 


TC 275 

prEN 15890:2009 

Foodstuffs Determination of patulin in fruit juice and 

fruit based puree for young children HPLC method with 

liquid/liquid partition cleanup and solid phase 

extraction and UV detection 


TC 275 

prEN 15891:2009 

Foodstuffs Determination of deoxynivalenol in cereals, 

cereal products and cereal based foods for infants and 

young children - HPLC method with immunoaffinity 

column cleanup and UV detection 


TC 275 

prEN ISO 6887-5:2008 

Microbiology of food and animal feeding stuffs 

Preparation of test samples, initial suspension and 

decimal dilutions for microbiological examination Part 5: 

Specific rules for the preparation of milk and milk 

products 

(ISO/DIS 6887-5:2008) 


TC 275 

prEN ISO 13720:2009 

Meat and meat products Enumeration of presumptive 

Pseudomonas spp. 

(ISO/DIS 13720:2009) 


TC 278 

prEN 15876-1:2008 

Electronic fee collection Conformity evaluation of on 

board unit and roadside equipment to EN 15509 Part 1: 

Test suite structure and test purposes 


TC 278 

prEN ISO 17573:2009 

Electronic fee collection Systems architecture for vehicle 

related tolling 

(ISO/DIS 17573:2009) 


TC 278 

prEN ISO 24534-1:2008 

Automatic vehicle and equipment identification 

Electronic Registration Identification (ERI) for 

vehicles Part 1: Architecture (ISO/DIS 24534-1:2008) 


TC 278 

prEN ISO 24534-2:2008 



vehicles Part 2: Operational requirements (ISO/DIS 

24534-2:2008) 


TC 278 

prEN ISO 24534-3:2008 



vehicles Part 3: Vehicle data (ISO/DIS 24534-3:2008) 


TC 278 

prEN ISO 24534-4:2008 



vehicles Part 4: Secure communications using 

asymmetrical techniques 

(ISO/DIS 24534-4:2008) 


TC 282 

prEN ISO 28460:2009 

Petroleum and natural gas industries Installation and 

equipment for liquefied natural gas Ship-to-shore 

interface and port operations 

(ISO/DIS 28460:2009) 



TC 285 

prEN 9713:2008 

Neurosurgical implants Self-closing intracranial 

aneurysm clips 

(ISO 9713:2002) 


TC 285 

EN 12006-2:1998 /prA 1:2008 


cardiac and vascular implants Part 2: Vascular 

prostheses including cardiac valve conduits 


TC 285 

EN 12006-3:1998 /prA 1:2008 


cardiac and vascular implants Part 3: Endovascular 



TC 285 

prEN ISO 5840:2008 

Cardiovascular implants Cardiac valve prostheses 

(ISO 5840:2005) 


TC 285 

prEN ISO 7197:2008 

Neurosurgical implants Sterile, single-use 

hydrocephalus shunts and components 

(ISO 7197:2006, including Cor 1:2007) 


TC 285 

prEN ISO 7439:2008 

Copper-bearing intra-uterine contraceptive devices 

Requirements, tests 

(ISO 7439:2002) 


TC 285 

prEN ISO 14602:2008 

Non-active surgical implants Implants for Osteosynthesis 

Particular requirements 

(ISO 14602:1998) 


TC 285 

prEN ISO 14607:2008 

Non-active surgical implants Mammary implants 

Particular requirements 

(ISO 14607:2007) 


TC 285 

prEN ISO 14630:2008 

Non-active surgical implants General requirements 

(ISO 14630:2008) 


TC 285 

prEN ISO 21534:2008 

Non-active surgical implants Joint replacement implants 

Particular requirements (ISO 21534:2007) 


TC 285 

prEN ISO 21535:2008 


Specific requirements for hip-joint replacement implants 

(ISO 21535:2007) 


TC 285 

prEN ISO 21536:2008 


Specific requirements for knee-joint replacement 

implants 

(ISO 21536:2007) 


TC 285 

prEN ISO 25539-1:2008 

Cardiovascular implants Endovascular devices Part 1: 

Endovascular prostheses 

(ISO 25539-1:2003 including Amd 1:2005) 


TC 285 

prEN ISO 25539-2:2008 

Cardiovascular implants Endovascular devices Part 2: 

Vascular stents 

(ISO 25539-2:2008) 


TC 286 

prEN 12807:2008 

LPG equipment and accessories Transportable refillable 

brazed steel cylinders for liquefied petroleum gas (LPG) 

Design and construction 


TC 287 

prCEN ISO/TS 19139:2008 

Geographic information Metadata XML schema 

implementation (ISO/TS 19139:2007) 


TC 287 

prEN ISO 6709:2008 

Standard representation of geographic point location by 

coordinates 

(ISO 6709:2008) 


TC 287 

prEN ISO 19141:2009 

Geographic information Schema for moving features 

(ISO 19141:2008) 


TC 287 

prEN ISO 19146:2008 

Geographic information Cross-domain vocabularies 

(ISO/DIS 19146:2008) 


TC 288 

prEN 1536:2008 

Execution of special geotechnical work Bored piles 


TC 288 

prEN 1538:2008 

Execution of special geotechnical work Diaphragm walls 


TC 289 

prEN ISO 11643:2006 

Leather Tests for colour fastness Colour fastness of 

small samples to solvents 

(ISO/FDIS 11643:2009) 


TC 289 

prEN ISO 11644:2009 

Leather Test for adhesion of finish 

(ISO/FDIS 11644:2009) 


TC 289 

prEN ISO 17072-2:2009 


Leather Chemical determination of metal content Part 2: 

Total metal content 

(ISO/DIS 17072-2:2009) 


TC 290 

EN ISO 4287:1998 /prA 1:2009 

Geometrical Product Specifications (GPS) Surface 

texture: Profile method - Terms, definitions and 

surface texture parameters Amendment 1: Peak count 

number (ISO 4287:1997/FDAmd 1:2009) 


TC 292 

prEN 15875:2008 

Characterization of waste Static test for determination of 

acid potential of sulfidic waste 


TC 293 

prEN ISO 24415-1:2009 

Tips for assistive products for walking Requirements and 

test methods Part 1: Friction of tips 

(ISO/FDIS 24415-1:2009) 


TC 295 

prEN 15544:2008 

One off Kachelgrundöfen/Putzgrundöfen (tiled/mortared 

stoves) Dimensioning 


TC 299 

prEN ISO 17072-1:2009 


Extractable metals 

(ISO/DIS 17072-1:2009) 


TC 302 

prEN ISO 1211:2008 

Milk Determination of fat content Gravimetric method 

(Reference method) 

(ISO/DIS 1211:2008) 


TC 302 

prEN ISO 5764:2009 

Milk Determination of freezing point Thermistor 

cryoscope method (Reference method) 

(ISO/FDIS 5764:2009) 


TC 305 

EN 14034-1:2004 /prA 1:2009 

Determination of explosion characteristics of dust 

clouds Part 1: Determination of the maximum explosion 

pressure pmax of dust clouds 


TC 305 

EN 14034-2:2006 /prA 1:2009 


clouds Part 2: Determination of the maximum rate of 

explosion pressure rise (dp/dt)max of dust clouds 


TC 305 

EN 14034-3:2006 /prA 1:2009 

Determination of explosion characteristics of dust clouds 

Part 3: Determination of the lower explosion limit LEL of 

dust clouds 


TC 305 

EN 14034-4:2004 /prA 1:2009 


clouds Part 4: Determination of the limiting oxygen 

concentration LOC of dust clouds 


TC 307 

prEN ISO 660:2009 

Animal and vegetable fats and oils Determination of acid 

value and acidity 

(ISO/FDIS 660:2009) 


TC 307 

prEN ISO 11701:2008 

Vegetable fats and oils Determination of phospholipids 

in lecithins by high performance liquid chromatography 

(HPLC) using a light scattering detector (ISO/DIS 

11701:2008) 


TC 307 

prEN ISO 11702:2008 

Animal and vegetable fats and oils Enzymatic 

determination of total sterols content 

(ISO/DIS 11702:2008) 


TC 307 

prEN ISO 12966-3:2008 

Animal and vegetable fats and oils Gas chromatography 

of fatty acid methyl esters Part 3: Preparation of 

methyl esters using trimethylsulfonium hydroxide 

(TMSH) 

(ISO/DIS 12966-3:2008) 


TC 307 

prEN ISO 16931:2009 

Animal and vegetable fats and oils Determination of 

polymerized triglycerides by high-performance 

sizeexclusion chromatography (HPSEC) (ISO/FDIS 

16931:2009) 


TC 307 

prEN ISO 17059:2009 

Oilseeds Extraction of oil and preparation of methyl esters 

of triglyceride fatty acids for analysis by gas 

chromatography (Rapid method) (ISO 17059:2007) 


TC 307 

prEN ISO 22959:2009 


polycyclic aromatic hydrocarbons by on-line 

donor-acceptor complex hromatography and HPLC with 

fluorescence detection (ISO/FDIS 22959:2009) 


TC 318 

prEN 13798:2009 

Hydrometry Specification for a reference raingauge pit 


TC 319 

prEN 13306:2008 

Maintenance Maintenance terminology 


TC 319 

prEN 15331:2009 

Criteria for design, management and control of 

maintenance services for buildings 


TC 327 

prEN ISO 5983-2:2009 

Animal feeding stuffs Determination of nitrogen content 


and calculation of crude protein content Part 2: Block 

digestion and steam distillation method 

(ISO/FDIS 5983-2:2009) 


TC 332 

prEN ISO 4787:2008 

Laboratory glassware Volumetric instruments Methods for 

testing of capacity and for use 

(ISO/DIS 4787:2008) 


TC 336 

prEN 12846-1:2008 

Bitumen and bituminous binders Determination of efflux 

time by the efflux viscometer Part 1: Bituminous 

emulsions 


TC 336 

prEN 12846-2:2008 

Bitumen and bituminous binders Determination of the 

efflux time by the efflux viscometer Part 2: Cut-back 

and fluxed bituminous binders 


TC 336 

prEN 13074-1:2008 

Bitumen and bituminous binders Recovery of binder from 

bituminous emulsion or cut-back or fluxed bitumen by 

evaporation 


TC 336 

prEN 13074-2:2008 

Bitumen and bituminous binders Stabilisation of binder 

from bituminous emulsion or cut-back or fluxed bitumen 

after recovery 


TC 336 

EN 15326:2007 /prA 1:2008 

Bitumen and bituminous binders Measurement of density 

and specific gravity Capillary-stoppered pyknometer 

method 


TC 337 

prEN 15429-2:2009 

Sweepers Part 2: Performance requirements and test 

methods 


TC 337 

prEN 15518-1:2009 

Winter maintenance equipment Road weather information 

systems Part 1: Global definitions and components 


TC 337 

prEN 15518-2:2009 


systems Part 2: Road weather - Recommended 

observation and forecast 


TC 337 

prEN 15518-3:2009 


systems Part 3: Requirements on measured values of 

stationary equipments 


TC 337 

prEN 15583-1:2009 

Winter maintenance equipment Snow ploughs Part 1: 

Product description and requirements 


TC 337 

prEN 15906:2009 

Winter maintenance equipment Snow removal machines 

with rotating tools Specification and clearing capacity 


TC 341 

prEN ISO 22476-12:2009 

Geotechnical investigation and testing Field testing 

Part 12: Mechanical cone penetration test (CPTM) 

(ISO/FDIS 22476-12:2009) 


TC 343 

prEN 15357:2008 

Solid recovered fuels Terminology, definitions and 

descriptions 


TC 344 

prEN 15878:2008 

Steel static storage systems Adjustable pallet racking 

Terms and definitions 


TC 346 

prEN 15886:2008 

Conservation of cultural property Test methods Colour 

measurement of surfaces 


TC 346 

prEN 15898:2009 

Conservation of cultural property Main general terms and 

definitions concerning conservation of cultural property 


TC 347 

EN 12472:2005 /prA 1:2008 

Method for the simulation of wear and corrosion for the 

detection of nickel release from coated items 


TC 350 

prEN 15643-1:2009 

Sustainability of Construction Works Assessment of 

Buildings Part 1: General Framework 


TC 350 

prEN 15643-2:2009 

Sustainability of construction works Sustainibility 

assessment of buildings Part 2: Framework for the 

assessment of environmental performance 


TC CSC01 

prEN ISO 676:2009 

Spices and condiments Botanical nomenclature (ISO 

676:1995, including Cor 1:1997) 


TC CSC01 

prEN ISO 939:2009 

Spices and condiments Determination of moisture 

content Entrainment method 

(ISO 939:1980) 


TC CSC01 

prEN ISO 948:2009 

Spices and condiments Sampling (ISO 948:1980) 



TC CSC01 

prEN ISO 3218:2009 

Essential oils Principles of nomenclature 

(ISO 3218:1976) 


TC CSF01 

EN ISO 5457:1999 /prEN ISO 1:2009 

Technical product documentation Sizes and layout of 

drawing sheets Amendment 1 (ISO 5457:1999/DAmd 

1:2009) 


TC CST01 

prEN ISO 10088:2009 

Small craft Permanently installed fuel systems 

(ISO/FDIS 10088:2009) 


TC CST01 

prEN ISO 12215-8:2009 

Small craft Hull construction and scantlings Part 8: 

Rudders (ISO/FDIS 12215-8:2009) 


TC CST01 

EN ISO 12217-1:2002 /prA 1:2009 

Small craft Stability and buoyancy assessment and 

categorization Part 1: Non-sailing boats of hull length 

greater than or equal to 6 m 

- Amendment 1 (ISO 12217-1:2002/FDAM 1:2009) 


TC CST01 

EN ISO 12217-3:2002 /prA 1:2009 

Small craft Stability and buoyancy assessment and 

categorization Part 3: Boats of hull length less than 6 m - 

Amendment 1 (ISO 12217-3:2002/FDAM 1:2009) 


TC CST01 

EN ISO 15085:2003 /prA 1:2009 

Small craft Man-overboard prevention and recovery 

Amendment 1 (ISO 15085:2003/FDAmd 1:2009) 


TC CSS02 

prEN ISO 8536-2:2008 

Infusion equipment for medical use Part 2: Closures for 

infusion bottles 

(ISO/DIS 8536-2:2008) 


TC CSS02 

prEN ISO 8536-3:2009 

Infusion equipment for medical use Part 3: Aluminium 

caps for infusion bottles 

(ISO/FDIS 8536-3:2009) 


TC CSM11 

prEN ISO 2740:2008 

Sintered metal materials, excluding hardmetals Tensile 

test pieces (ISO/FDIS 2740:2008) 


TC CSM11 

prEN ISO 3327:2009 

Hardmetals Determination of transverse rupture strength 

(ISO/FDIS 3327:2009) 


TC CSN21 

prEN ISO 6326-1:2009 

Natural gas Determination of sulfur compounds Part 1: 

General introduction 

(ISO 6326-1:2007) 


TC CSN21 

prEN ISO 12213-1:2009 

Natural gas Calculation of compression factor Part 1: 

Introduction and guidelines 

(ISO 12213-1:2006) 


TC CSN21 

prEN ISO 12213-2:2009 


Calculation using molar-composition analysis 

(ISO 12213-2:2006) 


TC CSN21 

prEN ISO 12213-3:2009 


Calculation using physical properties 

(ISO 12213-3:2006) 


TC CSH99 

prEN ISO 18416:2009 

Cosmetics Microbiology Detection of Candida albicans 

(ISO 18416:2007) 


TC CSH99 

prEN ISO 21148:2009 

Cosmetics Microbiology General instructions for 

microbiological examination 

(ISO 21148:2005, including Cor 1:2006) 


TC CSH99 

prEN ISO 21149:2009 

Cosmetics Microbiology Enumeration and detection of 

aerobic mesophilic bacteria 

(ISO 21149:2006) 


TC CSH99 

prEN ISO 21150:2009 

Cosmetics Microbiology Detection of Escherichia coli 

(ISO 21150:2006) 


TC CSH99 

prEN ISO 22717:2009 

Cosmetics Microbiology Detection of Pseudomonas 

aeruginosa 

(ISO 22717:2006) 


TC CSH99 

prEN ISO 22718:2009 

Cosmetics Microbiology Detection of Staphylococcus 

aureus 

(ISO 22718:2006) 


TC CSH99 

prEN ISO 24444:2009 

Cosmetics Sun protection test methods in vivo 

determination of SPF (Sun Protection Factor) 

(ISO/DIS 24444:2009) 


TC ECISS/TC1 

prEN ISO 204:2009 

Metallic materials Uniaxial creep testing in tension 

Method of test (ISO/FDIS 204:2009) 


TC ECISS/TC10 


EN 10025-6:2004 /prA 1:2008 

Hot rolled products of structural steels Part 6: Technical 

delivery conditions for flat products of high yield 

strength structural steels in the quenched and tempered 

condition 


TC ECISS/TC10 

prEN 10225:2008 

Weldable structural steels for fixed offshore structures 

Technical delivery conditions 


TC ECISS/TC10 

prEN 10238:2008 

Automatically blast-cleaned and automatically 

prefabrication primed structural steel products 


TC ECISS/TC20 

prCEN/TR 10317:2009 

European certified reference materials (EURONORM-CRMs) 

for the determination of the chemical composition of 

iron and steel products prepared under the auspices of 

the European Committee for Iron and Steel 

Standardization 


TC ECISS/TC22 

prEN 10028-2:2008 

Flat products made of steels for pressure purposes Part 2: 

Non-alloy and alloy steels with specified elevated 

temperature properties 


TC ECISS/TC22 

prEN 10028-3:2008 


Weldable fine grain steels, normalized 


TC ECISS/TC22 

prEN 10028-4:2008 


Nickel alloy steels with specified low temperature 

properties 


TC ECISS/TC22 

prEN 10028-5:2008 

Flat products made of steels for pressure purposes Part 

5: Weldable fine grain steels, thermomechanically rolled 


TC ECISS/TC22 

prEN 10028-6:2008 

Flat products made of steels for pressure purposes Part 

6: Weldable fine grain steels, quenched and tempered 


TC ECISS/TC23 

prEN ISO 10893-3:2009 

Non-destructive testing of steel tubes Part 3: Automated 

full peripheral flux leakage testing of seamless and 

welded (except submerged arc-welded) ferromagnetic steel 

tubes for the detection of longitudinal and/or 

transversal mperfections (ISO/DIS 10893-3:2009) 


TC ECISS/TC27 

prEN 10169:2008 

Continuously organic coated (coil coated) steel flat 

products Technical delivery conditions 


TC ECISS/TC29 

prEN ISO 10893-1:2009 


electromagnetic testing of seamless and welded (except 

submerged arc-welded) steel tubes for the verification of 

hydraulic leak-tightness instead of the hydrostatic test 

(ISO/DIS 10893-1:2009) 


TC ECISS/TC29 

prEN ISO 10893-2:2009 


eddy current testing of seamless and welded (except 

submerged arc-welded) steel tubes for the detection of 

imperfections (ISO/DIS 10893-2:2009) 


TC ECISS/TC29 

prEN ISO 10893-4:2009 

Non-destructive testing of steel tubes Part 4: Liquid 

penetrant inspection of seamless and welded steel tubes 

for the detection of surface imperfections (ISO/DIS 

10893-4:2009) 


TC ECISS/TC29 

prEN ISO 10893-5:2009 

Non-destructive testing of steel tubes Part 5: Magnetic 

particle inspection of seamless and welded ferromagnetic 

steel tubes for the detection of surface imperfections 

(ISO/DIS 10893-5:2009) 


TC ECISS/TC29 

prEN ISO 10893-6:2009 

Non-destructive testing of steel tubes Part 6: 

Radiographic testing of the weld seam of welded steel 

tubes for the detection of imperfections (ISO/DIS 

10893-6:2009) 


TC ECISS/TC29 

prEN ISO 10893-7:2009 

Non-destructive testing of steel tubes Part 7: Digital 

radiographic testing of the weld seam of welded steel 

tubes for the detection of imperfections (ISO/DIS 

10893-7:2009) 


TC ECISS/TC29 

prEN ISO 10893-8:2009 


ultrasonic testing of seamless and welded steel tubes 

for the detection of laminar imperfections (ISO/DIS 

10893-8:2009) 


TC ECISS/TC29 

prEN ISO 10893-9:2009 


ultrasonic testing for the detection of laminar 

imperfections in strip/plate used for the manufacture of 

welded steel tubes (ISO/DIS 10893-9:2009) 


TC ECISS/TC29 

prEN ISO 10893-10:2009 


full peripheral ultrasonic testing of seamless and welded 

(except submerged arc-welded) steel tubes for the 

detection of longitudinal and/or transversal 

imperfections 

(ISO/DIS 10893-10:2009) 



TC ECISS/TC29 

prEN ISO 10893-11:2009 


ultrasonic testing of weld seam of welded steel tubes for 

the detection of longitudinal and/or transversal 

imperfections (ISO/DIS 10893-11:2009) 


TC ECISS/TC29 

prEN ISO 10893-12:2009 

Non-destructive testing of steel tubes Part 12: 

Automated full peripheral ultrasonic thickness testing 

of seamless and welded (except submerged arc-welded) 

steel tubes (ISO/DIS 10893-12:2009) 


TC ECISS/TC30 

prEN 10223-1:2008 

Steel wire and wire products for fences Part 1: Zinc and 

zinc-alloy coated steel barbed wire 


TC ECISS/TC30 

prEN 10223-2:2008 

Steel wire and wire products for fences Part 2: Hexagonal 

steel wire netting for agricultural, insulation and fencing 

purposes 


TC ECISS/TC30 

prEN 10223-3:2008 

Steel wire and wire products for fences Part 3: 

Hexagonal steel wire mesh products for engineering 

purposes 


TC ECISS/TC30 

prEN 10223-4:2008 

Steel wire and wire products for fences Part 4: Steel 

wire welded mesh fencing 


TC ECISS/TC30 

prEN 10223-5:2008 

Steel wire and wire products for fences Part 5: Steel 

wire woven hinged joint and knotted mesh fencing 


TC ECISS/TC30 

prEN 10223-6:2008 

Steel wire and wire products for fences Part 6: Steel wire 

chain link fencing 


TC ECISS/TC30 

prEN 10223-7:2008 

Steel wire and wire products for fences Part 7: Steel wire 

welded panels for fencing 


TC ECISS/TC30 

prEN 10223-8:2008 

Steel wire and wire products for fences Part 8: Welded 

mesh gabion products 


TC ECISS/TC30 

prEN 10257-1:2008 

Zinc or zinc alloy coated non-alloy steel wire for 

armouring either power cables or telecommunication 

cables Part 1: Land cables 


cables Part 2: Submarine cables 


TC AECMA 

prEN 3613:2009 

Aerospace series Bolts, normal hexagonal head, relieved 

shank, long thread, in heat resisting nickel base alloy 

NI-PH2601 (Inconel 718), silver plated Classification: 

1 275 MPa/650 °C 


TC AECMA 

prEN 4071:2009 

Aerospace series Bolts, normal hexagonal head, close 

tolerance normal shank, short thread, in titanium alloy, 

aluminium IVD coated Classification: 1 100 MPa (at 

ambient temperature) / 425 °C 


TC AECMA 

prEN 4127:2009 

Aerospace series Bolts, normal hexagonal head, coarse 

tolerance normal shank, short thread, in titanium alloy, 

aluminium IVD coated Classification: 1 100 MPa (at 

ambient temperature) / 425 °C 


TC AECMA 

prEN 4128:2009 


tolerance normal shank, short thread, in heat resisting 

nickel base alloy, aluminium IVD coated Classification: 

1 250 MPa (at ambient temperature) / 425 C 


TC AECMA 

prEN 4132:2009 


tolerance normal shank, long thread, in alloy steel, 

cadmium plated Classification: 1 100 MPa (at ambient 

temperature) / 235 °C 


TC AECMA 

prEN 4474:2009 

Aerospace series Aluminium pigmented coatings 

Coating methods 


TC AECMA 

prEN 4534-2:2009 

Aerospace series Bushes, plain in aluminium alloy with 

self-lubricating liner, elevated load Part 2: Dimensions 

and loads - Inch series 


TC AECMA 

prEN 4535-2:2009 

Aerospace series Bushes, flanged in aluminium alloy with 

self-lubricating liner, elevated load Part 2: Dimensions 

and loads - Inch series 


TC AECMA 

prEN 4536-2:2009 

Aerospace series Bushes, plain in corrosion resisting 

steel with self-lubricating liner, elevated load Part 2: 

Dimensions and loads - Inch series 


TC ECISS/TC30 

prEN 10257-2:2008 

Zinc or zinc alloy coated non-alloy steel wire for 

armouring either power cables or telecommunication 


TC AECMA 

prEN 4537-2:2009 

Aerospace series Bushes, flanged in corrosion-resisting 

steel with self-lubricating liner, elevated load Part 2: 

Dimensions and loads - Inch series 



2.2 Questionários Preliminares 

Lista de documentos de referência (RD) objecto de Questionários Preliminares (PQ), com vista à 

sua aceitação como normas europeias. 

LISTA VAZIA 


2.3 Comités Técnicos do CEN 

Lista dos Comités Técnicos do Comité Europeu de Normalização (CEN) em relação aos quais não existe ONS 

(Organismo de Normalização Sectorial) ou CT (Comissão Técnica) e cujos processos se encontram disponíveis para 

consulta no IPQ. 

AECMA 

European association of aerospace manufacturers 

CEN/TC 12 

Materials, equipment and offshore structures for 

petroleum and natural gas industries 

CEN/TC 44 

Household refrigerating appliances and commercial 

refrigerated cabinets 

CEN/TC 50 

Lighting columns and spigots 

CEN/TC 53 

Temporary works equipment 

CEN/TC 87 

Gas fuelled smokers lighters 

CEN/TC 88 

Thermal insulating materials and products 

CEN/TC 89 

Thermal performance of buildings and building 

components 

CEN/TC 99 

Wallcoverings 

CEN/TC 105 

Valves and fittings to equip radiators 

CEN/TC 107 

Pre-fabricated district heating pipe systems 

CEN/TC 113 

Heat pumps and air conditioning units 

CEN/TC 123 

Lasers and laser related equipment 

CEN/TC 125 

Masonry 

CEN/TC 128 

Roof covering products for discontinuous laying and 

products for wall cladding 

CEN/TC 130 

Space heating appliances without integral heat sources 

CEN/TC 135 

Execution of steel structures 

CEN/TC 136 

Sports, playground and other recreational equipment 

CEN/TC 145 

Rubber and plastics machines - Safety 

CEN/TC 146 

Packaging machines - Safety 

CEN/TC 148 

Continuous handling equipment and systems - Safety 

CEN/TC 149 

Rail-dependent storage and retrieval equipment - Safety 

CEN/TC 150 

Industrial trucks - Safety 

CEN/TC 151 

Construction equipment and building material machines - 

Safety 

CEN/TC 152 

Fairground and amusement park machinery and 

structures - Safety 

CEN/TC 153 

Food processing machinery - Safety and hygiene 

specifications 

CEN/TC 156 

Ventilation for buildings 

CEN/TC 163 

Sanitary appliances 

CEN/TC 166 

Chimneys 

CEN/TC 167 

Structural bearings 

CEN/TC 169 

Lighting applications 

CEN/TC 171 

Heat cost allocation 

CEN/TC 173 

Brushware 

CEN/TC 176 

Heat meters 


CEN/TC 177 

Prefabricated reinforced components of autoclaved 

aerated concrete or light-weight aggregate concrete 

with open structure 

CEN/TC 178 

Paving units and kerbs 

CEN/TC 182 

Refrigerating systems, safety and environmental 

requirements 

CEN/TC 183 

Waste management 

CEN/TC 186 

Industrial thermoprocessing - Safety 

CEN/TC 188 

Conveyor belts 

CEN/TC 189 

Geotextiles and geotextile-related products 

CEN/TC 190 

Foundry technology 

CEN/TC 193 

Adhesives 

CEN/TC 195 

Air filters for general air cleaning 

CEN/TC 196 

Machines for underground mines - Safety 

CEN/TC 197 

Pumps 

CEN/TC 198 

Printing and paper machinery - Safety 

CEN/TC 200 

Tannery machinery - Safety 

CEN/TC 201 

Leather and imitation leather goods and footwear 

manufacturing machinery - Safety 

CEN/TC 202 

Foundry machinery 

CEN/TC 216 

Chemical disinfectants and antiseptics 

CEN/TC 217 

Surfaces for sport areas 

CEN/TC 219 

Cathodic protection 

CEN/TC 221 

Metallic shop-fabricated tanks 

CEN/TC 222 

Feather and down as filling material for any article, as 

well as finished articles filled with feather and down 

CEN/TC 225 

Bar coding 

CEN/TC 226 

Road equipment 

CEN/TC 232 

Compressors - Safety 

CEN/TC 239 

Rescue systems 

CEN/TC 241 

Gypsum and gypsum based products 

CEN/TC 242 

Safety requirements for passenger transportation by rope 

CEN/TC 245 

Leisure accommodation vehicles 

CEN/TC 247 

Controls for mechanical building services 

CEN/TC 253 

Self adhesive tapes 

CEN/TC 256 

Railway applications 

CEN/TC 259 

Medical alarms and signals 

CEN/TC 263 

Secure storage of cash, valuables and data media 

CEN/TC 270 

Internal combustion engines 

CEN/TC 271 

Surface treatment equipment - Safety 

CEN/TC 273 

Logistics 

CEN/TC 274 

Aircraft ground support equipment 

CEN/TC 277 

Suspended ceilings 

CEN/TC 278 

Road transport and traffic telematics 


CEN/TC 279 

Value management - Value analysis, functional 

analysis 

CEN/TC 280 

Offshore containers 

CEN/TC 283 

Precious metals - Application in jewellery and 

associated products 

CEN/TC 288 

Execution of special geotechnical works 

CEN/TC 289 

Leather 

CEN/TC 290 

Dimensional and geometrical product specification and 

verification 

CEN/TC 291 

Self-service shopping trolleys 

CEN/TC 293 

Technical aids for disabled persons 

CEN/TC 296 

Tanks for transport of dangerous goods 

CEN/TC 297 

Free-standing industrial chimneys 

CEN/TC 318 

Hydrometry 

CEN/TC 320 

Transportation services 

CEN/TC 322 

Equipment for metal production and rolling mills - Safety 

requirements 

CEN/TC 323 

Raised access floors 

CEN/TC 324 

Castors and wheels 

CEN/TC 325 

Prevention of crime by urban planning and building 

design (provisional) 

CEN/TC 326 

Gas supply for natural gas vehicles (NGV) 

CEN/TC 328 

Standard measuring system for cleaning performance 

CEN/TC 329 

Criteria for describing tourist services in objective tourist 

information systems 

CEN/TC 332 

Laboratory equipment (provisional) 

CEN/TC 301 

Electrically propelled road vehicles 

CEN/TC 303 

Floor screeds and in-situ floorings in buildings 

CEN/TC 305 

Potencially explosive atmospheres - Explosion 

prevention and protection 

CEN/TC 309 

Footwear 

CEN/TC 310 

Advanced manufacturing technologies 

CEN/TC 313 

Industrial centrifugs - Safety requirements 

(provisional) 

CEN/TC 314 

Mastic asphalt for waterproofing 

CEN/TC 315 

Spectator accomodations 

CEN/TC 317 

Derivates from coal from pyrolisis 


3. Projectos de Norma e propostas de estudo de novas Normas do Comité 

Europeu de Normalização Electrotécnica (CENELEC) 

Os projectos de normas e propostas de estudo de novas normas estão organizadas por Comités Técnicos do CENELEC. 



BTWG CLC/ETSI/ 

prEN 50529-1:2008 

Conducted transmission networks Part 1: 

Telecommunication lines 



prEN 50529-2:2008 

Conducted transmission networks Part 2: Coaxial cables 

(CaTV-based) 



prEN 50529-3:2008 

Conducted transmission networks Part 3: Power line 

communication (mains network-based) 


SC 9XC 

prEN 50388:2008 

Railway applications - Power supply and rolling stock - 

Technical criteria for the coordination between power 

supply (substation) and rolling stock to achieve 

interoperability 


SC 9XC 

prEN 50526-1:2009 

Railway applications - Fixed installations - D.C. surge 

arresters and voltage limiting devices Part 1: Surge 

arresters 


SC 9XB 

FprEN 61881-1:2009 

Railway applications - Rolling stock equipment - 

Capacitors for power electronics Part 1: Requirements, 

tests and general information 

(IEC 61881-1:200X) 


SC 31-1 

FprEN 60079-10-2:2009 

Explosive atmospheres Part 10-2: Classification of 

areas - Combustible dust atmospheres 

(IEC 60079-10-2:200X) 


SC 31-9 

FprEN 60079-29-4:2008 

Explosive atmospheres Part 29-4: Gas detectors - 

Performance requirements of open path detectors for 

flammable gases 

(IEC 60079-29-4:200X) 


SR 7 

FprEN 61394:2008 

Overhead lines - Requirements for greases for 

aluminium, aluminium alloy and steel bare conductors 

(IEC 61394:200X) 


SR 10 

FprEN 60666:2008 

Detection and determination of specified additives in 

mineral insulating oils 

(IEC 60666:200X) 


SR 15 

FprEN 60684-3-209:2008 

Flexible insulating sleeving Part 3: Specification for 

individual types of sleeving Sheet 209: Heat-shrinkable 

polyolefin sleeving, general purpose, flame retarded 

(IEC 60684-3-209:200X) 


SR 15 

FprEN 60684-3-280:2008 


individual types of sleeving Sheet 280: Heat-shrinkable, 

polyolefin sleeving, anti-tracking 

(IEC 60684-3-280:200X) 


SR 15 

FprEN 60684-3-281:2008 



polyolefin sleeving, semi conductive 

(IEC 60684-3-281:200X) 


SR 15 

FprEN 60684-3-282:2008 



polyolefin sleeving, stress control 

(IEC 60684-3-282:200X) 


SR 15 

FprEN 60684-3-283:2008 



polyolefin sleeving, for bus-bar insulation 

(IEC 60684-3-283:200X) 


SR 15 

FprEN 60684-3-116&117:2008 


individual types of sleeving Sheets 116 and 117: 

Extruded polychloroprene, general purpose 

(IEC 60684-3-116 & 117:200X) 



SR 15 

EN 60893-3-2:2004 /FprA 1:2009 

Insulating materials - Industrial rigid laminated sheets 

based on thermosetting resins for electrical purposes 

Part 3-2: Specifications for individual materials - 

Requirements for rigid laminated sheets based on epoxy 

resins 

(IEC 60893-3-2:2003/A1:200X) 


SR 15 

EN 60893-3-3:2004 /FprA 1:2009 




Requirements for rigid laminated sheets based on 

melamine resins 

(IEC 60893-3-3:2003/A1:200X) 


SR 15 

EN 60893-3-4:2004 /FprA 1:2009 


based on thermosetting resins for electrical purposes Part 

3-4: Specifications for individual materials - 


phenolic resins 

(IEC 60893-3-4:2003/A1:200X) 


SR 15 

EN 60893-3-5:2004 /FprA 1:2009 





polyester resins 

(IEC 60893-3-5:2003/A1:200X) 


SR 15 

EN 60893-3-6:2004 /FprA 1:2009 




Requirements for rigid laminated sheets based on silicone 

resins 

(IEC 60893-3-6:200/A1:200X) 


SR 15 

EN 60893-3-7:2004 /FprA 1:2009 





polyimide resins 

(IEC 60893-3-7:2003/A1:200X) 


SR 15 

FprEN 62329-3-100:2009 

Heat shrinkable moulded shapes Part 3: Specification 

requirements for shape dimensions, material 

requirements and compatibility performance Sheet 100: 

Heat-shinkable moulded shape dimensions 


SR 15 

FprEN 62329-3-101:2009 




Heat-shinkable moulded shapes, polyolefin, semi-rigid, 

limited fire hazard, material requirements and system 

performance 


SR 15 

FprEN 62329-3-102:2009 




Heat-shinkable elastomeric moulded shapes, semi-rigid, 

material requirements and system performance 


SR 17B 

FprEN 60947-7-2:2009 

Low-voltage switchgear and controlgear Part 7-2: 

Ancillary equipment - Protective conducteur terminal 

blocks for copper conductors 

(IEC 60947-7-2:200X) 


SR 23G 

EN 60320-2-4:2006 /FprA 1:2008 

Appliance couplers for household and similar general 

purposes Part 2-4: Couplers dependent on appliance 

weight for engagement 

(IEC 60320-2-4:2005/A1:200X) 


SR 23 

FprEN 62080:2009 

Sound signalling devices for household and similar 

purposes 

(IEC 62080:2001 + A1:2008) 


SR 29 

FprEN 60318-4:2008 

Electroacoustics - Simulators of human head and ear Part 

4: Occluded-ear simulator for the measurement of 

earphones coupled to the ear by means of ear inserts 

(IEC 60318-4:200X) 


SR 29 

FprEN 60645-6:2009 

Electroacoustics - Audiometric equipment Part 6: 

Instruments for the measurement of otoacoustic 

emissions 

(IEC 60645-6:200X) 


SR 29 

FprEN 60645-7:2009 


Instruments for the measurement of auditorybrainstem 

responses 

(IEC 60645-7:200X) 


SR 29 

FprEN 62489-1:2008 

Electroacoustics - Audio-frequency induction loop 

systems for assisted hearing Part 1: Methods of 

measuring and specifying the performance of system 

components 

(IEC 62489-1:200X) 


SR 29 

FprEN 62489-2:2009 



calculating and measuring the low-frequency magnetic 

field emissions from the loop for assessing conformity 

with guidelines on limits for human exposure 

(IEC 62489-2:200X) 



SR 32B 

EN 60269-1:2007 /FprA 1:2009 

Low-voltage fuses Part 1: General requirements 

(IEC 60269-1:2006/prA1:200X) 


SR 32B 

FprEN 60269-4:2009 

Low-voltage fuses Part 4: Supplementary requirements for 

fuse-links for the protection of semiconductor devices 

(IEC 60269-4:200X) 


SR 32A 

FprEN 60644:2008 

Specification for high-voltage fuse-links for motor 

circuit application 

(IEC 60644:200X) 


SR 32C 

EN 60691:2003 /FprA 2:2009 

Thermal-links - Requirements and application guide 

(IEC 60691:2002/A2:200X) 


SR 34A 

EN 60081:1998 /FprEN 4:2008 

Double-capped fluorescent lamps - Performance 


(IEC 60081:1997/A4:200X (fragment 1)) 


SR 40 

FprEN 60286-3-1:2009 

Packaging of components for automatic handling Part 

3-1: Packaging of surface mount components on 

continuous tapes - Type V - Pressed carrier tapes 

(IEC 60286-3-1:200X) 


SR 40 

FprEN 60286-3-2:2009 



continuous tapes - Type VI - Blister carrier tapes of 4 

mm width 

(IEC 60286-3-2:200X) 


SR 40 

EN 60738-1:2006 /FprA 1:2008 

Thermistors - Directly heated positive temperature 

coefficient Part 1: Generic specification 

(IEC 60738-1:2006/A1:200X) 


SR 46F 

FprEN 61169-39:2008 

Radio-frequency connectors Part 39: Sectional 

Specification for CQM series quick lock RF connectors 

(IEC 61169-39:200X) 


SR 46F 

FprEN 62562:2009 

Cavity resonator method to measure the complex 

permittivity of low-loss dielectric plates 

(IEC 62562:200X) 


SR 47D 

FprEN 60191-6:2009 

Mechanical standardization of semiconductor devices 

Part 6 : General rules for the preparation of outline 

drawings of surface mounted semiconductor device 

packages 

(IEC 60191-6:200X) 


SR 47 

FprEN 60749-20-1:2009 

Semiconductor devices - Mechanical and climatic test 

methods Part 20-1: Handling, packing, labelling and 

shipping of surface-mount devices sensitive to the 

combined effect of moisture and soldering heat 

(IEC 60749-20-1:200X) 


SR 47 

FprEN 62047-6:2009 

Semiconductor devices - Micro-electromechanical devices 

Part 6: Axial fatigue testing methods of thin film 

materials 

(IEC 62047-6:200X) 


SR 47 

FprEN 62374-1:2008 

Time dependent dielectric breakdown test (TDDB) for 

inter-metal layers 

(IEC 62374-1:200X) 


SR 47 

FprEN 62418:2009 

Semiconductor devices - Metallization stress void test 

(IEC 62418:200X) 


SR 48D 

FprEN 60297-3-106:2009 

Mechanical structures for electronic equipment - 

Dimensions of mechanical structures of the 482,6 mm (19 

in) series Part 3-106: Adaptation dimensions for 

subracks and chassis applicable with metric cabinets or 

racks in accordance with IEC 60917-2-1 

(IEC 60297-3-106: 200X) 


SR 48B 

FprEN 60603-7-1:2009 

Connectors for electronic equipment Part 7-1: Detail 

specification for 8-way, shielded free and fixed 

connectors 

(IEC 60603-7-1:200X) 


SR 48B 

FprEN 60603-7-41:2008 


specification for 8-way, un-shielded, free and fixed 

connectors, for data transmissions with frequencies up 

to 500 MHz 

(IEC 60603-7-41:200X) 


SR 48B 

FprEN 60603-7-51:2008 


specification for 8-way, shielded, free and fixed 


to 500 MHz 

(IEC 60603-7-51:200X) 


SR 48B 

FprEN 60603-7-71:2009 

Connectors for electronic equipment 

Part 7-71: Detail specification for 8-way, shielded, 

free and fixed connectors, for data transmission with 

frequencies up to 1000 MHz 

(IEC 60603-7-71:200X) 



SR 48D 

FprEN 60917-2-4:2009 

Modular order for the development of mechanical 

structures for electronic equipment practices Part 2-4: 

Sectional specification - Interface co-ordination 

dimensions for the 25 mm equipment practice - 

Adaptation dimensions for subracks or chassis 

applicable in cabinets or racks in accordance with IEC 

60297-3-100 (19 in) 

(IEC 60917-2-4:200X) 


SR 48B 

FprEN 61076-3-114:2009 

Connectors for electronic equipment - Product 

requirements Part 3-114: Rectangular connectors - Detail 

specification for protective housings for use with 8-way 

shielded and unshielded connectors for frequencies up 

to 600 MHz for industrial environments incorporating 

the IEC 60603-7 series interface - Variant 11 related to 

IEC 61076-3-106 - Bayonet coupling type 

(IEC 61076-3-114:200X) 


SR 48B 

FprEN 61076-3-117:2009 




shielded and unshielded connectors for industrial 

environments incorporating the IEC 60603-7 series 

interface - Variant 14 related to IEC 61076-3-106 - Push 

pull coupling 

(IEC 61076-3-117:200X) 


SR 49 

FprEN 60679-6:2008 

Quartz crystal controlled oscillators of assessed quality 

Part 6: Phase jitter measurement method for quartz 

crystal oscillators and SAW oscillators - Application 

guide 

(IEC 60679-6:200X) 


SR 51 

FprEN 60401-2:2008 

Terms and nomenclature for cores made of magnetically 

soft ferrite Part 2: Reference of dimensions 

(IEC 60401-2:200X) 


SR 51 

FprEN 60401-2:2008 



(IEC 60401-2:200X) 


SR 51 

FprEN 62333-3:2008 

Noise suppression sheet for digital devices and equipment 

Part 3: Characterization of parameters of noise 

suppression sheet 

(IEC 62333-3:200X) 


SR 57 

FprEN 60870-5-6:2008 

Telecontrol equipment and systems Part 5-6: Guidelines 

for conformance testing for IEC 60870-5 companion 

standards 

(IEC 60870-5-6:2006) 


SR 57 

FprEN 61970-301:2009 

Energy management system application program 

interface (EMS-API) Part 301: Common information 

model (CIM) base 

(IEC 61970-301:200X) 


SR 65B 

FprEN 60534-2-4:2009 

Industrial-process control valves Part 2-4: Flow capacity 

- Inherent flow characteristics and rangeability 

(IEC 60534-2-4:200X) 


SR 65B 

FprEN 60534-7:2009 

Industrial-process control valves Part 7: Control valve 

data sheet 

(IEC 60534-7:200X) 


SR 65B 

FprEN 61003-2:2008 

Industrial-process control systems - Instruments with 

analogue inputs and two- or multi-state outputs Part 2: 

Guidance for inspection and routine testing 

(IEC 61003-2:200X) 


SR 65A 

FprEN 61508-1:2008 

Functional safety of electrical/electronic/programmable 

electronic safety-related systems Part 1: General 

requirements 

(IEC 61508-1:200X) 


SR 65A 

FprEN 61508-2:2008 


electronic safety-related systems Part 2: Requirements 

for electrical/electronic/programmable electronic 

safety-related systems 

(IEC 61508-2:200X) 


SR 65A 

FprEN 61508-3:2008 


electronic safety-related systems Part 3: Software 

requirements 

(IEC 61508-3:200X) 


SR 65A 

FprEN 61508-4:2008 


electronic safety-related systems Part 4: Definitions and 

abbreviations 

(IEC 61508-4:200X) 


SR 65A 

FprEN 61508-5:2008 


electronic safety-related systems Part 5: Examples of 

methods for the determination of safety integrity levels 

(IEC 61508-5:200X) 


SR 65A 

FprEN 61508-6:2008 


electronic safety-related systems Part 6: Guidelines on 

the application of IEC 61508-2 and IEC 61508-3 

(IEC 61508-6:200X) 



SR 65A 

FprEN 61508-7:2008 


electronic safety-related systems Part 7: Overview of 

techniques and measures 

(IEC61508-7:200X) 


SR 66 

FprEN 61010-1:2009 

Safety requirements for electrical equipment for 

measurement, control, and laboratory use Part 1: General 

requirements 

(IEC 61010-1:200X) 


SR 66 

FprEN 61010-2-030:2009 


measurement, control, and laboratory use Part 2-030: 

Particular requirements for testing and measuring 

circuits 

(IEC 61010-2-030:200X) 


SR 69 

FprEN 62576:2008 

Electric Double-Layer Capacitors for Use in Hybrid 

Electric Vehicles - Test Methods for Electrical 

Characteristics 

(IEC 62576:200X) 


SR 80 

FprEN 62616:2009 

Maritime navigation and radiocommunication equipment 

and systems - Bridge navigational watch alarm system 

(BNWAS) - Performance requirements, methods of testing 

and required test results 

(IEC 62616:200X) 


SR 86 

FprEN 61746-1:2008 

Calibration of Optical Time-Domain Reflectometers 

(OTDR) Part 1: OTDR for single-mode fibres 

(IEC 61746-1:200X) 


SR 86B 

FprEN 61978-1:2008 

Fibre optic passive chromatic dispersion compensators 

Part 1: Generic specification 

(IEC 61978-1:200X) 


SR 86C 

FprEN 62150-4:2009 

Fibre optic active components and devices - Basic test 

and measurement procedures Part 4: Relative intensity 

noise using a time-domain optical detection system 

(IEC 62150-4:200X) 


SR 86 

FprEN 62496-3-1:2008 

Optical circuit boards - Performance standard Part 3-1: 

Flexible optical circuit boards using unconnectorized 

optical glass fibres 

(IEC 62496-3-1:200X) 


SR 87 

FprEN 61391-2:2008 

Ultrasonics - Pulse-echo scanners Part 2: Measurement 

of maximum depth of penetration and local dynamic 

range 

(IEC 61391-2:200X) 


SR 89 

FprEN 60695-1-10:2008 

Fire hazard testing Part 1-10: Guidance for assessing the 

fire hazard of electrotechnical products - General 


(IEC 60695-1-10:200X) 


SR 90 

FprEN 61788-8:2009 

Superconductivity Part 8: AC loss measurements - Total 

AC loss measurement of round superconducting wires 

exposed to a transverse alternating magnetic field at 

liquid helium temperature by a pickup coil method 

(IEC 61788-8:200X) 


SR 91 

FprEN 61188-7:2009 

Printed boards and printed board assemblies - Design and 

use Part 7: Electronic component zero orientation for 

CAD library construction 

(IEC 61188-7:200X) 


SR 91 

EN 61190-1-3:2007 /FprA 1:2009 

Attachment materials for electronic assembly Part 1-3: 

Requirements for electronic grade solder alloys and 

fluxed and non-fluxed solid solders for electronic 

soldering applications 

(IEC 61190-1-3:2007/A1:200X) 


SR 91 

FprEN 61249-4-14:2009 

Materials for printed boards and other interconnecting 

structures Part 4-14: Sectional specification set for 

prepreg materials, unclad (for the manufacture of 

multilayer boards) - Epoxide woven E-glass prepreg of 

defined flammability (vertical burning test) for lead-free 

assembly 

(IEC 61249-4-14:200X) 


SR 91 

FprEN 61249-4-15:2009 




multilayer boards) - Multifunctional epoxide woven 

E-glass prepreg of defined flammability (vertical burning 

test) for lead-free assembly 

(IEC 61249-4-15:200X) 


SR 91 

FprEN 61249-4-16:2009 




multilayer boards) - Multifunctional non-halogenated 

epoxide woven E-glass prepreg of defined flammability 

(vertical burning test) for lead-free assembly 

(IEC 61249-4-16:200X) 


SR 91 

FprEN 61249-4-17:2009 





multilayer boards) - Non-halogenated epoxide woven 



(IEC 61249-4-17:200X) 


SR 96 

FprEN 61558-2-8:2009 

Safety of transformers, reactors, power supply units and 

similar products for supply voltages up to 1 100 V Part 

2-8: Particular requirements and tests for bell and chime 

transformers 

(IEC 61558-2-8:200X) 


SR 96 

FprEN 61558-2-12:2008 



2-12: Particular requirements and tests for constant 

voltage transformers and power supply units 

incorporating constant voltages transformers 

(IEC 61558-2-12:200X) 


SR 96 

FprEN 61558-2-20:2008 



2-20: Particular requirements and tests for small 

reactors 

(IEC 61558-2-20:200X) 


SR 100 

FprEN 60461:2009 

Time and control code 

(IEC 60461:200X) 


SR 100 

EN 60958-3:2006 /FprA 1:2009 

Digital audio interface 

Part 3: Consumer applications 

(IEC 60958-3:2006/A1:200X) 


SR 100 

FprEN 61937-11:2008 

Digital audio - Interface for non-linear PCM encoded 

audio bitstreams applying IEC 60958 Part 11: MPEG-4 

AAC and its extensions in LATM/LOAS 

(IEC 61937-11:200X) 


SR 100 

FprEN 62458:2008 

Sound system equipment - Electroacoustic transducers - 

Measurement of large signal parameters 

(IEC 62458:200X) 


SR 100 

FprEN 62459:2008 


Measurement of suspension parts 

(IEC 62459:200X) 


SR 101 

FprEN 61340-5-3:2009 

Electrostatics Part 5-3: Protection of electronic devices 

from electrostatic phenomena - Properties and 

requirements classifications for packaging intended for 

electrostatic discharge sensitive devices 

(IEC 61340-5-3:200X) 


SR 105 

FprEN 62282-6-300:2009 

Fuel cell technologies Part 6-300: Micro fuel cell power 

systems - Fuel cartridge interchangeability 

(IEC 62282-6-300:200X) 


SR 110 

FprEN 61747-5-3:2009 

Liquid crystal display devices Part 5-3: Environmental, 

endurance and mechanical test methods - Glass strength 

and reliability 

(IEC 61747-5-3:200X) 


SR 110 

FprEN 62341-1-1:2009 

Organic Light Emitting Diode (OLED) displays Part 1-1: 

Generic specifications 

(IEC 62341-1-1:200X) 


SR 110 

FprEN 62341-6-1:2009 

Organic Light Emitting Diode (OLED) displays Part 6-1: 

Measuring methods of optical and electro-optical 

parameters 

(IEC 62341-6-1:200X) 


SR 112 

EN 60112:2003 /FprA 1:2009 

Method for the determination of the proof and the 

comparative tracking indices of solid insulating 

materials 

(IEC 60112:2003/A1:200X) 


SR 112 

FprEN 61857-21:2009 

Electrical insulation systems - Procedures for thermal 

evaluation Part 21: Specific requirements for 

general-purpose models - Wire-wound applications 

(IEC 61857-21:200X) 


TC 2 

FprEN 60034-1:2008 

Rotating electrical machines Part 1: Rating and 

performance 

(IEC 60034-1:200X) 


TC 2 

FprEN 60034-2-2:2008 

Rotating electrical machines Part 2-2: Specific methods 

for determining separate losses of large machines from 

tests, supplementing Part 2-1 


TC 2 

FprEN 60034-18-1:2008 

Rotating electrical machines Part 18-1: Functional 

evaluation of insulation systems - General guidelines 

(IEC 60034-18-1:200X) 


TC 13 

FprEN 62059-32-1:2008 

Electricity metering equipment - Dependability Part 32-1: 

Durability - Testing of the stability of metrological 

characteristics by applying elevated temperature 

(IEC 62059-32-1:200X) 



TC 17AC 

prEN 50532:2009 

Compact Equipment Assembly for Distribution 

Substations (CEADS) 


TC 17B 

EN 60947-5-1:2004 /FprA 1:2009 

Low-voltage switchgear and controlgear Part 5-1: Control 

circuit devices and switching elements - 

Electromechanical control circuit devices 

(IEC 60947-5-1:2003/A1:200X) 


TC 17B 

FprEN 60947-7-1:2009 


Ancillary equipment - Terminal blocks for copper 

conductors 

(IEC 60947-7-1:200X) 


TC 17B 

FprEN 60947-7-3:2009 


Ancillary equipment - Safety requirements for fuse 

terminal blocks 

(IEC 60947-7-3:200X) 


TC 17AC 

FprEN 62271-104:2009 

High-voltage switchgear and controlgear Part 104: 

Alternating current switches for rated voltages of 52 kV 

and above 

(IEC 62271-104:200X) 


TC 20 

prEN 50397-3:2008 

Covered conductors for overhead lines and the related 

accessories for rated voltages above 1 kV a.c. and not 

exceeding 36 kV a.c. Part 3: Guide to use 


TC 20 

prEN 50525-1:2008 

Electric cables - Low voltage energy cables of rated 

voltages up to and including 450/750 V Part 1: General 

requirements 


TC 20 

prEN 50525-2-11:2008 


voltages up to and including 450/750 V Part 2-11: Cables 

for general applications - Flexible cables with 

thermoplastic PVC insulation 


TC 20 

prEN 50525-2-12:2008 



for general applications - Extensible leads with 

thermoplastic PVC insulation 


TC 20 

prEN 50525-2-21:2008 



for general applications - Flexible cables with 

crosslinked elastomeric insulation 


TC 20 

prEN 50525-2-22:2008 



for general applications - High flexibility braided cables 

with crosslinked elastomeric insulation 


TC 20 

prEN 50525-2-31:2008 



for general applications - Single core non-sheathed 

cables with thermoplastic PVC insulation 


TC 20 

prEN 50525-2-41:2008 



for general applications -Single core cables with 

crosslinked silicone rubber insulation 


TC 20 

prEN 50525-2-42:2008 



for general applications - Single core non-sheathed 

cables with crosslinked EVA insulation 


TC 20 

prEN 50525-2-51:2008 



for general applications - Oil resistant control cables 

with thermoplastic PVC insulation 


TC 20 

prEN 50525-2-72:2008 



for general applications - Flat divisible cables (cords) 

with thermoplastic PVC insulation 


TC 20 

prEN 50525-2-81:2008 



for general applications - Cables with crosslinked 

elastomeric covering for arc welding 


TC 20 

prEN 50525-2-82:2008 



for general applications - Cables with crosslinked 

elastomeric insulation for decorative chains 


TC 20 

prEN 50525-2-83:2008 



for general applications Multicore cables with crosslinked 

silicone rubber insulation 


TC 20 

prEN 50525-3-11:2008 



with special fire performance - Flexible cables with 


halogen-free thermoplastic insulation, and low emission 

of smoke 


TC 20 

prEN 50525-3-21:2008 



with special fire performance - Flexible cables with 

halogen-free crosslinked insulation, and low emission of 

smoke 


TC 20 

prEN 50525-3-31:2008 



with special fire performance - Single core non-sheathed 

cables with halogen-free thermoplastic insulation, and 

low emission of smoke 


TC 20 

prEN 50525-3-41:2008 



with special fire performance - Single core non-sheathed 

cables with halogen-free crosslinked insulation, and 

low emission of smoke 


TC 20 

FprEN 60332-3-10:2009 

Tests on electric and optical fibre cables under fire 

conditions Part 3-10: Test for vertical flame spread of 

vertically-mounted bunched wires or cables - Apparatus 

(IEC 60332-3-10:2000 + A1:2008) 


TC 20 

FprEN 60332-3-21:2009 

Tests on electric cables under fire conditions Part 3-21: 

Test for vertical flame spread of vertically-mounted 

bunched wires or cables - Category A F/R 

(IEC 60332-3-21:2000) 


TC 20 

FprEN 60332-3-22:2009 



vertically-mounted bunched wires or cables - Category A 

(IEC 60332-3-22:2000 + A1:2008) 


TC 20 

FprEN 60332-3-23:2009 



vertically-mounted bunched wires or cables - Category B 

(IEC 60332-3-23:2000 + A1:2008) 


TC 20 

FprEN 60332-3-24:2009 



vertically-mounted bunched wires or cables - Category C 

(IEC 60332-3-24:2000 + A1:2008) 


TC 20 

FprEN 60332-3-25:2009 



vertically-mounted bunched wires or cables - Category D 

(IEC 60332-3-25:2000 + A1:2008) 


TC 22X 

EN 61204-7:2006 /FprA A:2008 

Low voltage power supplies, d.c. output Part 7: Safety 

requirements 


TC 22X 

EN 62040-3:2001 /FprA A:2009 

Uninterruptible power systems (UPS) Part 3: Method of 

specifying the performance and test requirements 


TC 23BX 

EN 50428:2005 /FprA 2:2008 

Switches for household and similar fixed electrical 

installations - Collateral standard - Switches and 

related accessories for use in home and building 

electronic systems (HBES) 


TC 23BX 

EN 60669-1:1999 /FprA ISA:2008 

Switches for household and similar fixed-electrical 

installations Part 1: General requirements 


TC 23BX 

FprEN 60669-1:2009 



(IEC 60669-1:200X) 


TC 23BX 

EN 60669-2-1:2004 /FprA A:2009 

Switches for household and similar fixed electrical 

installations Part 2-1: Particular requirements - 

Electronic switches 


TC 23BX 

EN 60670-1:2005 /FprA ISA:2008 

Boxes and enclosures for electrical accessories for 

household and similar fixed electrical installations Part 

1: General requirements 


TC 26A 

FprEN 60974-6:2008 

Arc welding equipment Part 6: Limited duty power 

sources 

(IEC 60974-6:200X) 


TC 26A 

FprEN 60974-11:2008 

Arc welding equipment Part 11: Electrode holders 

(IEC 60974-11:200X) 


TC 31 

FprEN 60079-13:2009 

Explosive atmospheres Part 13: Equipment protected by 

pressurized rooms "p" 

(IEC 60079-13:200X) 


TC 31 

FprEN 60079-18:2009 

Explosive atmospheres Part 18: Equipment protection by 

encapsulation "m" 

(IEC 60079-18:200X) 



TC 34Z 

EN 60061-1:1993 /FprA 41:2009 

Lamp caps and holders together with gauges for the 

control of interchangeability and safety Part 1: Lamp 

caps 

(IEC 60061-1:1969/A41:200X) 


TC 34Z 

EN 60061-1:1993 /FprA 43:2009 



caps 

(IEC 60061-1:1969/A43:200X) 


TC 34Z 

EN 60061-2:1993 /FprA 38:2009 


control of interchangeability and safety Part 2: 

Lampholders 

(IEC 60061-2:1969/A38:200X) 


TC 34Z 

EN 60061-2:1993 /FprA 40:2009 


control of interchangeability and safety Part 2: 

Lampholders 

(IEC 60061-2:1969/A40:200X) 


TC 34Z 

EN 60061-3:1993 /FprA 39:2009 


control of interchangeability and safety Part 3 Gauges 

(IEC 60061-3:1969/A39:200X) 


TC 34Z 

EN 60061-3:1993 /FprA 41:2009 


control of interchangeability and safety Part 3 Gauges 

(IEC 60061-3:1969/A41:200X) 


TC 34Z 

FprEN 61347-2-2:2008 

Lamp controlgear Part 2-2: Particular requirements for 

d.c. or a.c. supplied electronic step-down convertors for 

filament lamps 

(IEC 61347-2-2:200X) 


TC 34Z 

EN 62384:2006 /FprA 1:2008 

DC or AC supplied electronic control gear for LED 

modules - Performance requirements 

(IEC 62384:2006/A1:200X) 


TC 34Z 

FprEN 62386-102:2009 

Digital addressable lighting interface Part 102: General 

requirements - Control gear 

(IEC 62386-102:200X) 


TC 34Z 

FprEN 62386-203:2009 

Digital addressable lighting interface Part 203: 

Particular requirements for control gears - Discharge 

lamps (excluding fluorescent lamps) (device type 2) 

(IEC 62386-203:200X) 


TC 34Z 

FprEN 62386-204:2009 


Particular requirements for control gears- Low voltage 

halogen lamps (device type 3) 

(IEC 62386-204:200X) 


TC 44X 

FprEN 60204-33:2008 

Safety of machinery - Electrical equipment of machines 

Part 33: Requirements for semiconductor fabrication 

equipment 

(IEC 60204-33:200X) 


TC 55 

EN 60264-1:1994 /FprA 1:2009 

Packaging of winding wires Part 1 - Containers for 

round winding wires 

(IEC 60264-1:1968/A1:200X) 


TC 55 

FprEN 60317-8:2009 

Specifications for particular types of winding wires Part 

8: Polyesterimide enamelled round copper wire, class 

180 

(IEC 60317-8:200X) 


TC 55 

FprEN 60317-12:2009 


12 : Polyvinyl acetal enamelled round copper wire, class 

120 

(IEC 60317-12:200X) 


TC 55 

FprEN 60317-13:2009 

Specifications for particular types of winding wires 

Part 13: Polyester or polyesterimide overcoated with 

polyamide-imide enamelled round copper wire, class 

200 

(IEC 60317-13:200X) 


TC 55 

EN 60317-15:2004 /FprA 1:2009 


Part 15: Polyesterimide enamelled round aluminium 

wire, class 180 

(IEC 60317-15:2004/A1:200X) 


TC 55 

FprEN 60317-17:2009 


17: Polyvinyl acetal enamelled rectangular copper wire, 

class 105 

(IEC 60317-17:200X) 


TC 55 

EN 60317-18:2004 /FprA 1:2009 



class 120 

(IEC 60317-18:2004/A1:200X) 


TC 55 

EN 60317-22:2004 /FprA 1:2009 


Part 22: Polyester or polyesterimide enamelled round 

copper wire overcoated with polyamide, class 180 


(IEC 60317-22:2004/A1:200X) 


TC 55 

FprEN 60317-25:2009 



polyamide-imide enamelled round aluminium wire, class 

200 

(IEC 60317-25:200X) 


TC 55 

EN 60317-26:1996 /FprA 2:2009 


Part 26: Polyamide-imide enamelled round copper wire, 

class 200 

(IEC 60317-26:1990/A2:200X) 


TC 55 

EN 60317-29:1996 /FprA 2:2009 



polyamide-imide enamelled rectangular copper wire, 

class 200 

(IEC 60317-29:1990/A2:200X) 


TC 55 

EN 60317-42:1997 /FprA 1:2009 


Part 42: Polyester-amide-imide enamelled round copper 


(IEC 60317-42:1997/A1:200X) 


TC 55 

EN 60317-43:1997 /FprA 1:2009 


Part 43: Aromatic polyimide tape wrapped round copper 


(IEC 60317-43:1997/A1:200X) 


TC 55 

EN 60317-44:1997 /FprA 1:2009 


Part 44: Aromatic polyimide tape wrapped rectangular 

copper wire, class 240 

(IEC 60317-44:1997/A1:200X) 


TC 55 

EN 60851-1:1996 /FprA 2:2008 

Winding wires - Test methods Part 1: General 

(IEC 60851-1:1996/A2:200X) 


TC 55 

FprEN 60851-2:2008 

Winding wires - Test methods Part 2: Determination of 

dimensions 

(IEC 60851-2:200X) 


TC 59X 

FprEN 50523-1:2009 

Household appliances interworking Part 1: Functional 



TC 59X 

FprEN 50523-2:2009 

Household appliances interworking Part 2: Data 

structures 


TC 59X 

FprEN 60704-2-2:2008 

Household and similar electrical appliances - Test code 

for the determination of airborne acoustical noise Part 

2-2: Particular requirements for fan heaters 

(IEC 60704-2-2:200X) 


TC 61 

FprEN 60335-1:2008 

Household and similar electrical appliances - Safety Part 


(IEC 60335-1:200X, fragment 1) 


TC 61 

FprEN 60335-1:2008 



(IEC 60335-1:200X, fragment 4) 


TC 61 

FprEN 60335-1:2008 



(IEC 60335-1:200X, fragment 3) 


TC 61 

FprEN 60335-1:2008 



(IEC 60335-1:200X, fragment 2) 


TC 61 

FprEN 60335-2-2:2008 


2-2: Particular requirements for vacuum cleaners and 

water-suction cleaning appliances 

(IEC 60335-2-2:200X) 


TC 61 

EN 60335-2-4:2008 /FprA A:2009 


2-4: Particular requirements for spin extractors 


TC 61 

EN 60335-2-7:2008 /FprA A:2009 

Household and similar electrical appliances - Safety 

Part 2-7: Particular requirements for washing machines 


TC 61 

FprEN 60335-2-13:2008 


2-13: Particular requirements for deep fat fryers, frying 

pans and similar appliances 

(IEC 60335-2-13:200X) 


TC 61 

FprEN 60335-2-24:2008 


2-24: Particular requirements for refrigerating 

appliances, ice-cream appliances and ice makers 

(IEC 60335-2-24:200X) 


TC 61 

FprEN 60335-2-27:2008 


2-27: Particular requirements for appliances for skin 


exposure to ultraviolet and infrared radiation 

(IEC 60335-2-27:200X) 


TC 61 

EN 60335-2-29:2004 /FprA 2:2008 


2-29: Particular requirements for battery chargers 

(IEC 60335-2-29:2002/A2:200X) 


TC 61 

FprEN 60335-2-30:2008 


2-30: Particular requirements for room heaters 

(IEC 60335-2-30:200X) 


TC 61 

EN 60335-2-35:2002 /FprA 2:2008 


2-35: Particular requirements for instantaneous water 

heaters 

(IEC 60335-2-35:2002/A1:2006) 


TC 61 

EN 60335-2-41:2003 /FprA 2:2008 


2-41: Particular requirements for pumps 

(IEC 60335-2-41:2002/A2:200X) 


TC 61 

EN 60335-2-59:2003 /FprA 2:2008 


2-59: Particular requirements for insect killers 

(IEC 60335-2-59:2002/A2:200X) 


TC 61 

EN 60335-2-60:2003 /FprA A:2009 


2-60: Particular requirements for whirlpool baths and 

whirlpool spas 


TC 61 

EN 60335-2-60:2003 /FprAB B:2008 


2-60: Particular requirements for whirlpool baths and 

whirlpool spas 


TC 61 

EN 60335-2-67:2003 /FprAB B:2008 


2-67: Particular requirements for floor treatment and 

floor cleaning machines, for industrial and commercial 

use 


TC 61 

EN 60335-2-68:2003 /FprAB B:2008 


2-68: Particular requirements for spray extraction 

appliances, for industrial and commercial use 


TC 61 

EN 60335-2-69:2003 /FprAB C:2008 


Part 2-69: Particular requirements for wet and dry 

vacuum cleaners, including power brush, for industrial 

and commercial use 


TC 61 

FprEN 60335-2-72:2008 


2-72: Particular requirements for automatic machines for 

floor treatment for industrial and commercial use 

(IEC 60335-2-72:2002, modif + A1:2005, modif) 


TC 61 

EN 60335-2-73:2003 /FprA 2:2008 


2-73: Particular requirements for fixed immersion 

heaters 

(IEC 60335-2-73:2002/A2:200X) 


TC 61 

EN 60335-2-74:2003 /FprA 2:2008 


2-74: Particular requirements for portable immersion 

heaters 

(IEC 60335-2-74:2002/A2:200X) 


TC 61 

EN 60335-2-75:2004 /FprAB B:2008 


Part 2-75: Particular requirements for commercial 

dispensing appliances and vending machines 


TC 61 

EN 60335-2-79:2004 /FprA C:2008 

Household an similar electrical appliances - Safety Part 

2-79: Particular requirements for high pressure cleaners 

and steam cleaners 


TC 61 

FprEN 60335-2-89:2008 


2-89: Particular requirements for commercial 

refrigerating appliances with an incorporated or remote 

refrigerant condensing unit or compressor 

(IEC 60335-2-89:200X) 


TC 61 

EN 60335-2-103:2003 /FprA A:2008 


2-103: Particular requirements for drives for gates, 

doors and windows 


TC 61 

EN 60335-2-105:2005 /FprA A:2008 


2-105: Particular requirements for multifunctional 

shower cabinets 


TC 62 

FprEN 60601-2-4:2009 

Medical electrical equipment Part 2-4: Particular 

requirements for basic safety and essential performance of 

cardiac defibrillators 

(IEC 60601-2-4:200X) 


TC 62 

FprEN 60601-2-23:2009 


requirements for basic safety and essential performance 

of transcutaneous partial pressure monitoring equipment 

(IEC 60601-2-23:200X) 



TC 62 

FprEN 60601-2-25:2009 



of electrocardiographs 

(IEC 60601-2-25:200X) 


TC 62 

FprEN 60601-2-27:2009 

Medical electrical equipment 

Part 2-27: Particular requirements for basic safety and 

essential performance of electrocardiographic 

monitoring equipment 

(IEC 60601-2-27:200X) 


TC 62 

FprEN 60601-2-28:2008 



of X-ray tube assemblies for medical diagnosis 

(IEC 60601-2-28:200X) 


TC 62 

FprEN 60601-2-34:2009 



of invasive blood pressure monitoring equipment 

(IEC 60601-2-34:200X) 


TC 62 

FprEN 60601-2-46:2009 



of operating tables 

(IEC 60601-2-46:200X) 


TC 62 

FprEN 60601-2-49:2009 



of multifunction patient monitoring equipment 

(IEC 60601-2-49:200X) 


TC 62 

FprEN 60613:2008 

Electrical and loading characteristics of X -ray tube 

assemblies for medical diagnosis 

(IEC 60613:200X) 


TC 64 

FprHD 60364-4-42:2009 

Low voltage electrical installations Part 4-42: Protection 

for safety - Protection against thermal effects 

(IEC 60364-4-42:200X) 


TC 64 

FprHD 60364-4-442:2008 

Low voltage electrical installations Part 4-442: 

Protection for safety - Protection against voltage 

disturbances and electromagnetic disturbances 

(IEC 60364-4-44:2007) 


TC 64 

FprHD 60364-5-551:2009 

Eelectrical installations of buildings Part 5-55: 

Selection and erection of electrical equipment - Other 

equipment Clause 551 - Low-voltage generating sets 

(IEC 60364-5-55:2001/A2:2008 (CLAUSE 551)) 


TC 65CX 

prEN 50325-5:2008 

Industrial communications subsystem based on ISO 11898 

(CAN) for controller-device interfaces Part 5: 

Functional safety communication based on EN 50325-4 


TC 65CX 

FprEN 61784-3:2009 

Industrial communication networks - Profiles 

Part 3: Functional safety fieldbuses 

(IEC 61784-3:200X) 


TC 65CX 

FprEN 62439-1:2008 

Industrial communication networks high availability 

automation networks Part 1: General concepts and 

calculation methods (including RSTP) 

(IEC 62439-1:200X) 


TC 65CX 

FprEN 62439-2:2008 


automation networks Part 2: Media Redundancy 

Protocol (MRP) 

(IEC 62439-2:200X) 


TC 65CX 

FprEN 62439-3:2008 


automation networks Part 3: Parallel Redundancy 

Protocol (PRP) and High availability Seamless Ring 

(HSR) 

(IEC 62439-3:200X) 


TC 65CX 

FprEN 62439-4:2008 


automation networks Part 4: Cross-network Redundancy 

Protocol (CRP) 

(IEC 62439-4:200X) 


TC 65CX 

FprEN 62439-5:2008 


automation networks Part 5: Beacon Redundancy 

Protocol (BRP) 

(IEC 62439-5:200X) 


TC 65CX 

FprEN 62439-6:2008 


automation networks Part 6: Distributed Redundancy 

Protocol (DRP) 

(IEC 62439-6:200X) 


TC 78 

prEN 50528:2008 

Insulating ladders for use on or near low voltage electrical 

installations 


TC 78 

FprEN 60832-1:2008 

Live working - Insulating sticks and attachable devices 

Part 1: Insulating sticks 

(IEC 60832-1:200X) 



TC 78 

FprEN 60832-2:2008 

Live working - Isulating sticks and attachable devices 

Part 2: Attachable devices 

(IEC 60832-2:200X) 


TC 78 

FprEN 61111:2009 

Live working - Electrical insulating matting 

(IEC 61111:200X) 


TC 78 

FprEN 61112:2009 

Live working - Electrical insulating blankets 

(IEC 61112:200X) 


TC 78 

FprEN 61482-1-1:2009 

Live working - Protective clothing against the thermal 

nazards of an electric arc Part 1-1: Test methods - 

Method 1 - Determination of the arc rating (ATPV or 

EBT50) of flame resistant materials for clothing 

(IEC 61482-1-1:200X) 


TC 78 

FprEN 61482-2:2009 


hazards of an electric arc Part 2: Requirements 

(IEC 61482-2:200X) 


TC 79 

FprEN 50531:2008 

Alarm systems - Terms and definitions 


TC 79 

prEN 50518-2:2008 

Monitoring and alarm receiving centre Parte 2: 

Requirements for technical facilities 


TC 82 

FprEN 50530:2008 

Overallefficiency of photovoltaic inverters 


TC 82 

FprEN 60891:2008 

Procedures for temperature and irradiance corrections to 

measured I-V characteristics of photovoltaic devices 

(IEC 60891:200X) 


TC 82 

FprEN 62446:2009 

Grid connected PV systems - Minimum requirements for 

system documentation, commissioning tests, and 

inspection requirements 

(IEC 62446:200X) 


TC 82 

FprEN 62509:2009 

Performance and functioning of photovoltaic battery 

charge controllers 

(IEC 62509:200X) 


TC 86BXA 

prEN 50377-4-2:2008 

Connector sets and Interconnect components to be used 

in optical fibre communication systems - Product 

specifications Part 4-2: Type SC/PC simplex 8 

terminated on IEC 60793-2-50 category B1.1 and B1.3 

singlemode fibre, with full zirconia ferrule Category U 


TC 86BXA 

prEN 50377-8-10:2008 

Connector sets and interconnect components to be used in 

optical fibre communication systems - Product 


Part 8-10: Type LSH-APC simplex terminated on IEC 

60793-2-50 category B1.1 and B1.3 single mode fibre 

with titanium composite ferrule for Category C 


TC 86BXA 

prEN 50377-8-11:2008 




Part 8-11: Type LSH-PC simplex terminated on IEC 


with titanium composite ferrule for Category C 


TC 86BXA 

prEN 50377-8-12:2008 




Part 8-12: Type LSH-APC simplex terminated on IEC 


with titanium composite ferrule for Category U 


TC 86BXA 

prEN 50377-8-13:2008 




Part 8-13 Type LSH-PC simplex terminated on IEC 


with titanium composite ferrule for Category U 


TC 86BXA 

prEN 50377-14-1:2008 




Part 14-1: Patch cords with EN 60793-2-50 single mode 

category B1.1 and B1.3 fibre for category C 


TC 86BXA 

prEN 50411-2-9:2008 

Fibre organisers and closures to be used in optical fibre 

communications systems - Product specifications Part 2-9: 

Non-sealed closures for air blown optical fibre 

microduct cable, for category S & A 


TC 86BXA 

prEN 50411-3-2:2009 

Fibre organisers and closures to be used in optical fibre 

communications systems - Product specifications Part 

3-2: Singlemode mechanical fibre splice 


TC 86BXA 

FprEN 61300-2-12:2008 

Fibre optic interconnecting devices and passive 

components - Basic test and measurement procedures Part 

2-12: Tests - Impact 

(IEC 61300-2-12:200X) 



TC 86BXA 

FprEN 61300-2-21:2009 



2-21: Tests - Composite temperature-humidity cyclic test 

(IEC 61300-2-21:200X) 


TC 86BXA 

FprEN 61300-2-34:2009 



2-34: Tests - Resistance to solvents and contaminating 

fluids of interconnecting components and closures 

(IEC 61300-2-34:200X) 


TC 86BXA 

FprEN 61300-3-22:2008 


components - Basic test and measurement procedures 

Part 3-22: Examinations and measurements - Ferrule 

compression force 

(IEC 61300-3-22:200X) 


TC 86BXA 

FprEN 61754-24:2008 


components - Fibre optic connector interfaces Part 24- 

Type SC-RJ connector family 

(IEC 61754-24:200X) 


TC 88 

EN 61400-1:2005 /FprEN 1:2009 

Wind turbines 

Part 1: Design requirements 

(IEC 61400-1:2005/A1:200X) 


TC 88 

FprEN 61400-22:2008 

Wind turbines Part 22: Conformity testing and 

certification of wind turbines 

(IEC/TS 61400-22:200X) 


TC 88 

FprEN 61400-24:2009 

Wind turbines Part 24: Lightning protection 

(IEC 61400-24:200X) 


TC 99X 

prEN 50522:2008 

Earthing of power installations exceeding 1 kV a.c. 


TC 99X 

FprEN 61936-1:2008 

Power installations exceeding 1 kV a.c Part 1: Common 

rules 

(IEC 61936-1:200X) 


TC 106X 

FprEN 50519:2009 

Assessment of workers' exposure to electric and magnetic 

fields of industrial induction heating equipment 


TC 106X 

prEN 50527-1:2008 

Assessement of human exposure at the workplace for 

persons bearing active implantable medical devices 

(AIMD) in electric, magnetic and electromagnetic fields 

with frequencies from 0 Hz to 300 GH Part 1: General 


TC 106X 

FprEN 62209-2:2008 

Human exposure to radio frequency fields from 

hand-held and body-mounted wireless communication 

devices - Human models, Instrumentation, and procedures 

Part 2: Procedure to determine the specific absorption 

rate (SAR) for mobile wireless communication devices 

used in close proximity to the human body (frequency 

range of 30 MHz to 6 GHz) 

(IEC 62209-2:200X) 


TC 106X 

FprEN 62479:2008 

Assessment of the compliance of low power electronic and 

electrical apparatus with the basic restrictions related 

to human exposure to electromagnetic fields (10 MHz - 

300 GHz) 

(IEC 62479:200X) 


TC 106X 

EN 62479:2008 /FprA A:2008 




300 GHz) 


TC 108X 

EN 60065:2002 /FprA 2:2009 

Audio, video and similar electronic apparatus - Safety 

requirements 

(IEC 60065:2001/A2:200X) 


TC 116 

EN 60745-2-1:2003 /FprA D:2009 

Hand-held motor-operated electric tools - Safety Part 2-1: 

Particular requirements for drills and impact drills 


TC 116 

EN 60745-2-2:2003 /FprA C:2009 

Hand-held motor-operated electric tools - Safety Part 

2-2: Particular requirements for screwdrivers and 

impact wrenches 


TC 116 

EN 60745-2-3:2007 /FprAB B:2009 

Hand-held motor-operated electric tools - Safety Part 2-3: 

Particular requirements for grinders, polishers and 

disk-type sanders 


TC 116 

EN 60745-2-5:2007 /FprAB B:2009 


2-5: Particular requirements for circular saws 


TC 116 

EN 60745-2-6:2003 /FprA C:2009 


2-6: Particular requirements for hammers 


TC 116 

EN 60745-2-11:2003 /FprA C:2009 


2-11: Particular requirements for reciprocating saws (jig 

and sabre saws) 



TC 116 

EN 60745-2-12:2003 /FprA A:2008 


2-12: Particular requirements for concrete vibrators 


TC 116 

EN 60745-2-14:2003 /FprA 2:2009 


2-14: Particular requirements for planers 

(IEC 60745-2-14:2003/A2:200X) 


TC 116 

EN 60745-2-15:2006 /FprA 1:2009 


2-15: Particular requirements for hedge trimmers 

(IEC 60745-2-15:2006/A1:200X) 


TC 116 

EN 60745-2-19:2005 /FprA 1:2009 


2-19: Particular requirements for jointers 

(IEC 60745-2-19:2005/A1:2005) 


TC 206 

FprEN 62087:2009 

Methods of measurement for the power consumption of 

audio, video and related equipment 

(IEC 62087:2008) 


TC 206 

FprEN 62365:2009 

Digital audio - Digital input-output interfacing - 

Transmission of digital audio over asynchronous 

transfer mode (ATM) networks 

(IEC 62365:200X) 


TC 206 

FprEN 62546:2008 

HD recording link guidlines 

(IEC 62546:2000X) 


TC 209 

FprEN 60728-1-1:2008 

Cable networks for television signals, sound signals and 

interactive services Part 1-1: RF cabling for two way 

home networks 

(IEC 60728-1-1:200X) 


TC 209 

FprEN 60728-7-3:2008 

Cable Networks for television signals, sound signals and 

interactice services Part 7-3: Hybrid fibre coax outside 

plant status monitoring - Power Supply to Transponder 

Interface Bus (PSTIB) specification 

(IEC 60728-7-3:200X) 


TC 209 

FprEN 60728-11:2008 


interactive services Part 11: Safety 

(IEC 60728-11:200X) 


TC 209 

FprEN 60728-13:2008 


interactive services Part 13: Optical systems for 

broadcast signal transmissions 

(IEC 60728-13:200X) 


TC 210 

FprEN 55011:2009 

Industrial, scientific and medical equipment - 

Radio-frequency disturbance characteristics - Limits 

and methods of measurement 

(CISPR 11:200X) 


TC 210 

EN 55011:2009 /FprA A:2009 





TC 210 

EN 55013:2001 /prA ISA:2008 

Sound and television broadcast receivers and associated 

equipment - Radio disturbance characteristics - Limits 



TC 210 

EN 55020:2007 /prA ISA:2008 

Sound and television broadcast receivers and associated 

equipment - Immunity characteristics - Limits and 

methods of measurement 


TC 210 

FprEN 55024:2009 

Information technology equipment - Immunity 

characteristics - Limits and methods of measurement 

(CISPR 24: 200X) 


TC 210 

FprEN 61000-4-8:2008 

Electromagnetic compatibility (EMC) Part 4-8: Testing 

and measurement techniques - Power frequency magnetic 

field immunity test 

(IEC 61000-4-8:200X) 


TC 210 

EN 61000-4-13:2002 /FprA 1:2008 


and measurement techniques - Harmonics and 

interharmonics including mains signalling at a.c. power 

port, low frequency immunity tests 

(IEC 61000-4-13:2002/A1:200X) 


TC 210 

EN 61000-4-14:1999 /FprA 2:2008 


and measurement techniques - Voltage fluctuation 

immunity test 

(IEC 61000-4-14:1999/A2:200X) 


TC 210 

FprEN 61000-4-20:2008 

Electromagnetic compatibility (EMC) Part 4-20: 

Testing and measurement techniques - Emission and 

immunity testing in Transverse Electromagnetic (TEM) 

waveguides - Basic EMC Publication 

(IEC 61000-4-20:200X) 



TC 210 

FprEN 61000-4-20:2008 

Electromagnetic compatibility (EMC) Part 4-20: 

Testing and measurement techniques - Emission and 

immunity testing in Transverse Electromagnetic (TEM) 

waveguides - Basic EMC Publication 

(IEC 61000-4-20:200X (fragment 1) ) 


TC 210 

EN 61000-4-34:2007 /FprA 1:2008 

Electromagnetic compability (EMC) Part 4-34: Testing 

and measurement techniques - Voltage dips, short 

interruptions and voltage variations immunity tests for 

equipment with input current more than 16 A per phase 

(IEC 61000-4-34:2005/A1:200X) 


TC 213 

prEN 50085-2-3:2008 

Cable trunking systems and cable ducting systems for 

electrical installations Part 2-3: Particular requirements 

for slotted cable trunking systems intended for 

installation in cabinets 


TC 213 

FprEN 50520:2009 

Cover plantes and cover tapes for the protection and 

warning of the location of buried cables or burried 

conduits in underground installations 



3.2 Propostas de Anulação de Normas do Comité Europeu de Normalização Electrotécnica 

(CENELEC) 

As propostas de anulação de normas estão organizadas por Comités Técnicos do CENELEC. 


LISTA VAZIA 


3.3 Propostas de estudo de novas Normas - "Vilamoura Procedures" 

Lista de propostas de estudo baseadas em novas normas ou em revisão de normas apresentadas por organismos 

nacionais membros do CENELEC, com vista à possível elaboração de normas europeias 

LISTA VAZIA 


3.4 Questionários Preliminares 

Lista dos Documentos de Referência (RD) objecto de Questionários Preliminares (PQ), com vista à sua aceitação como 

normas europeias. 

LISTA VAZIA 


4. Projectos de Normas e Propostas de Estudo de Novas Normas do Comité 

Europeu de Normalização (CEN) / Comité Europeu de Normalização 

Electrotécnica (CENELEC) 

4.1 Projectos em Inquérito Público 


LISTA VAZIA 


5. Projectos de Norma do Instituto Europeu de Normalização para as 

Telecomunicações (ETSI) 

5.1 Projectos em Inquérito Público 


TC ETSI 

prEN 300065-2:2009 V1.2.1 

Electromagnetic compatibility and Radio spectrum 

Matters (ERM); Narrow-band direct-printing telegraph 

equipment for receiving meteorological or navigational 

information (NAVTEX) Part 2: Harmonized EN covering 

the essential requirements of article 3.2 of the R&TTE 

directive 


TC ETSI 

prEN 300065-3:2009 V1.2.1 


Matters (ERM); Narrow-band direct-printing telegraph 

equipment for receiving meteorological or navigational 

information (NAVTEX) Part 3: Harmonized EN covering 

the essential requirements of article 3.3 (e) of the R&TTE 

directive 


TC ETSI 

prEN 300176-1:2009 V2.1.0 

Digital Enhanced Cordless Telecommunications (DECT); 

Test specification Part 1: Radio 


TC ETSI 

prEN 300176-2:2008 V2.1.0 


Test specification Part 2: Audio and speech 


TC ETSI 

prEN 300338-1:2008 V1.3.1 


Matters (ERM); Technical characteristics and methods 

of measurement for equipment for generation, 

transmission and reception of Digital Selective 

Calling (DSC) in the maritime MF, MF/HF and/or VHF 

mobile service Part 1: Common requirements 


TC ETSI 

prEN 300338-2:2008 V1.3.1 






mobile service Part 2: Class A/B DSC 


TC ETSI 

prEN 300338-3:2008 V1.1.1 






mobile service Part 3: Class D DSC 


TC ETSI 

prEN 300338-4:2008 V1.1.1 






mobile service Part 4: Class E DSC 


TC ETSI 

prEN 300440-1:2008 V1.5.1 


Matters (ERM); Short range devices; Radio equipment to 

be used in the 1 GHz to 40 GHz frequency range Part 1: 

Technical characteristics and test methods 


TC ETSI 

prEN 300440-2:2008 V1.3.1 


Matters (ERM); Short range devices; Radio equipment to 

be used in the 1 GHz to 40 GHz frequency range Part 2: 

Harmonized EN covering essential requirements of 

article 3.2 of the R&TTE Directive 


TC ETSI 

prEN 300468:2008 V1.9.1 

Digital Video Broadcasting (DVB); Specification for 

Service Information (SI) in DVB systems 


TC ETSI 

prEN 300753:2009 V1.2.1 

Equipment Engineering (EE); Acoustic noise emitted by 

telecommunications equipment 


TC ETSI 

prEN 301406:2009 V2.1.0 


Harmonized EN for Digital Enhanced Cordless 

Telecommunications (DECT) covering the essential 

requirements under article 3.2 of the R&TTE Directive; 

Generic radio 


TC ETSI 

prEN 301489-4:2009 V1.4.1 


Matters (ERM); ElectroMagnetic Compatibility (EMC) 

standard for radio equipment and services Part 4: 

Specific conditions for fixed radio links, Broadband 


Data Transmission System Base stations, ancillary 

equipment and services 


TC ETSI 

prEN 301489-17:2009 V2.1.1 


Matters (ERM); ElectroMagnetic Compatibility (EMC) 

standard for radio equipment Part 17: Specific 

conditions for Broadband Data Transmission Systems 


TC ETSI 

prEN 301790:2009 V1.5.1 

Digital Video Broadcasting (DVB); Interaction channel for 

satellite distribution systems 


TC ETSI 

prEN 301839-1:2009 V1.3.1 


Matters (ERM); Short Range Devices (SRD); Ultra Low 

Power Active Medical Implants (ULP-AMI) and 

Peripherals (ULP-AMI-P) operating in the frequency 

range 402 MHz to 405 MHz Part 1: Technical 

characteristics and test methods 


TC ETSI 

prEN 302217-2-2:2008 V1.3.1 

Fixed Radio Systems; Characteristics and requirements 

for point-to-point equipment and antennas Part 2-2: 

Digital systems operating in frequency bands where 

frequency co-ordination is applied; Harmonized EN 

covering the essential requirements of Article 3.2 of 

the R&TTE Directive 


TC ETSI 

prEN 302217-3:2008 V1.3.1 


for point-to-point equipment and antennas Part 3: 

Equipment operating in frequency bands where both 

frequency coordinated or uncoordinated deployment might 

be applied; Harmonized EN covering the essential 

requirements of article 3.2 of the R&TTE Directive 



TC ETSI 

prEN 302684-2:2009 V1.0.0 


Matters (ERM); EMC network standards Part 2: 

Wire-line telecommunications networks using coaxial 

cables [Endorsed CENELEC pr50521-2: 2008] 


TC ETSI 

prEN 302684-3:2009 V1.0.0 



Wire-line telecommunications networks using power 

lines [Endorsed CENELEC pr50521-3: 2008] 


TC ETSI 

prEN 302839-2:2009 V1.3.1 


Matters (ERM); Short Range Devices (SRD); Ultra Low 

Power Active Medical Implants (ULP-AMI) and 

Peripherals (ULP-AMI-P) operating in the frequency 

range 402 MHz to 405 MHz Part 2: Harmonized EN 

covering essential requirements of article 3.2 of the 

R&TTE Directive 


TC ETSI 

prEN 303213-1:2008 V1.1.1 


Matters (ERM); Community Specification Advanced 

Surface Movement Guidance and Control System (A-SMGCS) 

for application under the Single European Sky 

Interoperability Regulation EC 552/2004 Part 1: Level 1 

including external interfaces 


TC ETSI 

prEN 302217-4-1:2008 V1.3.1 



System-dependent requirements for antennas 


TC ETSI 

prEN 302217-4-2:2008 V1.4.1 



Antennas; Harmonized EN covering the essential 

requirements of article 3.2 of the R&TTE Directive 


TC ETSI 

prEN 302567:2009 V1.1.0 

Broadband Radio Access Networks (BRAN); 60 GHz 

Multiple-Gigabit WAS/RLAN Systems; Harmonized EN 

covering the essential requirements of article 3.2 of the 

R&TTE Directive 


TC ETSI 

prEN 302684-1:2009 V1.0.0 



Wire-line telecommunications networks using 

telephone wires [Endorsed CENELEC pr50521-1: 2008] 


5.2 Propostas de Anulação de Normas 


LISTA VAZIA 


6. Projectos de Norma e propostas de estudo de novas Normas da Organização 

Internacional de Normalização (ISO) 

Os projectos de normas e propostas de estudo de novas normas estão organizadas por Comités Técnicos da ISO. 



FDIS 11643:2009 

Leather Tests for colour fastness Colour fastness of 

small samples to solvents 


FDIS 11644:2009 

Leather Test for adhesion of finish 


DIS 17072-1:2009 


Extractable metals 


DIS 17072-2:2009 


Total metal content 


TC 2 

DIS 225:2009 

Fasteners Bolts, screws, studs and nuts Symbols and 

designations of dimensions 


TC 6 

DIS 5351:2008 

Pulps Determination of limiting viscosity number in 

cupriethylenediamine (CED) solution 


TC 6 

FDIS 9416:2009 

Paper Determination of light scattering and absorption 

coefficients (using Kubelka-Munk theory) 


TC 6 

DIS 11476:2009 

Paper and board Determination of CIE-whiteness, C/2° 

(indoor illumination conditions) 


TC 8 

DIS 21072-3:2008 

Ships and marine technology Marine environment 

protection: performance testing of oil skimmers Part 3: 

High viscosity oil 


TC 10 

ISO 5457:1999 /DAM 1:2009 

Technical product documentation Sizes and layout of 

drawing sheets Amendment 1 


TC 17 

DIS 4986:2008 

Steel and iron castings Magnetic particle inspection 


TC 17 

DIS 4987:2008 

Steel and iron castings Liquid penetrant inspection 


TC 17 

DIS 10679:2008 

Steel Cast tool steel 


TC 17 

DIS 10893-1:2009 


electromagnetic testing of seamless and welded (except 

submerged arc-welded) steel tubes for the verification of 

hydraulic leak-tightness instead of the hydrostatic test 


TC 17 

DIS 10893-2:2009 


eddy current testing of seamless and welded (except 

submerged arc-welded) steel tubes for the detection of 

imperfections 


TC 17 

DIS 10893-3:2009 


full peripheral flux leakage testing of seamless and 

welded (except submerged arc-welded) ferromagnetic steel 

tubes for the detection of longitudinal and/or transversal 

mperfections 


TC 17 

DIS 10893-4:2009 

Non-destructive testing of steel tubes Part 4: Liquid 

penetrant inspection of seamless and welded steel tubes 

for the detection of surface imperfections 


TC 17 

DIS 10893-5:2009 

Non-destructive testing of steel tubes Part 5: Magnetic 

particle inspection of seamless and welded ferromagnetic 

steel tubes for the detection of surface imperfections 


TC 17 

DIS 10893-7:2009 

Non-destructive testing of steel tubes Part 7: Digital 


adiographic testing of the weld seam of welded steel 

tubes for the detection of imperfections 


TC 17 

DIS 10893-8:2009 


ultrasonic testing of seamless and welded steel tubes for 

the detection of laminar imperfections 


TC 17 

DIS 10893-9:2009 


ultrasonic testing for the detection of laminar 

imperfections in strip/plate used for the manufacture of 

welded steel tubes 


TC 17 

DIS 10893-10:2009 


full peripheral ultrasonic testing of seamless and welded 

(except submerged arc-welded) steel tubes for the 

detection of longitudinal and/or transversal 

imperfections 


TC 17 

DIS 10893-11:2009 


ultrasonic testing of weld seam of welded steel tubes for 

the detection of longitudinal and/or transversal 

imperfections 


TC 17 

DIS 10893-12:2009 


full peripheral ultrasonic thickness testing of seamless 

and welded (except submerged arc-welded) steel tubes 


TC 17 

DIS 17054:2008 

Routine method for analysis of high alloy steel by X-ray 

fluorescence spectrometry (XRF) by using a near-by 

technique 


TC 20 

DIS 22009:2008 

Space systems Space environment (natural and artificial) 

Model of the Earth's magnetospheric magnetic field 


TC 20 

DIS 22538-6:2008 

Space systems Oxygen safety 

Part 6: Facility planning and implementation 


TC 20 

DIS 23339:2008 

Space systems Unmanned spacecraft Requirements for 

estimating the mass of remaining usable propellant 


TC 20 

DIS 23461:2009 

Space systems Programme Management Nonconformance 

Control System 


TC 20 

DIS 27875:2008 

Space systems Re-entry risk management for unmanned 

spacecraft and launch vehicle orbital stages 


TC 21 

ISO 7240-11:2005 /FDAM 1:2009 

Fire detection and alarm systems Part 11: Manual call 

points 

AMENDMENT 1 


TC 21 

DIS 7240-17:2008 

Fire detection and fire alarm systems 

Part 17: Short-circuit isolators 


TC 21 

DIS 7240-18:2008 

Fire detection and fire alarm systems Part 18: 

Input/output devices 


TC 21 

DIS 7240-20:2008 

Fire detection and alarm systems Part 20: Aspirating 

smoke detectors 


TC 22 

DIS 8721:2008 

Road vehicles Measurement techniques in impact tests 

Optical instrumentation 


TC 22 

DIS 10924-4:2008 

Road vehicles Circuit breakers 

Part 4: Medium circuit breakers with tabs (blade 

type), Form CB15 


TC 22 

DIS 11452-9:2008 

Road vehicles Component test methods for electrical 

disturbances from narrowband radiated electromagnetic 

energy 

Part 9: Portable transmitters 


TC 22 

FDIS 11452-10:2009 

Road vehicles Component test methods for electrical 

disturbances from narrowband radiated electromagnetic 

energy 

Part 10: Immunity to conducted disturbances in the 

extended audio frequency range 


TC 22 

DIS 27955:2008 

Road vehicles Securing of cargo in passenger cars, 

station wagons and multi-purpose vehicles Requirements 

and test methods Véhicules routiers 


TC 22 

DIS 29061-1:2008 

Road vehicles Methods and criteria for usability 

evaluation of child restraint systems and their interface 

with vehicle anchorage systems Part 1: Vehicles and child restraint 

systems equipped with ISOFIX anchorages and 

attachments 


TC 23 

FDIS 11783-7:2009 

Tractors and machinery for agriculture and forestry 


Serial control and communications data network 

Part 7: Implement messages application layer 


TC 23 

DIS 11783-14:2008 

Tractors and machinery for agriculture and forestry 

Serial control and communications data network Part 14: 

Sequence control 


TC 23 

DIS 17103:2008 

Agricultural machinery Rotary disc mowers, rotary drum 

mowers and flail mowers Test methods and acceptance 

criteria for protective skirts 


TC 23 

FDIS 21299:2009 

Powered ride-on turf care equipment 

Roll-over protective structures (ROPS) Test procedures 

and acceptance criteria 


TC 31 

DIS 16992:2009 

Passenger car tyres Spare unit substitutive equipment 

(SUSE) 


TC 33 

DIS 1927-2:2008 

Unshaped refractory materials Part 2: Sampling for 

testing 


TC 33 

DIS 1927-3:2008 

Unshaped refractory materials Part 3: Characterization as 

received 


TC 33 

DIS 1927-4:2008 


consistency of castables 


TC 33 

DIS 1927-5:2008 

Unshaped refractory materials Part 5: Preparation and 

treatment of test pieces 


TC 33 

DIS 1927-6:2008 

Unshaped refractory materials Part 6: Measurement of 

physical properties 


TC 33 

DIS 1927-7:2008 

Unshaped refractory materials Part 7: Tests on 

pre-formed shapes 


TC 33 

DIS 1927-8:2008 


complementary properties 


TC 34 

FDIS 660:2009 

Animal and vegetable fats and oils Determination of acid 

value and acidity 


TC 34 

DIS 1211:2008 

Milk Determination of fat content Gravimetric method 

(Reference method) 


TC 34 

FDIS 5983-2:2009 

Animal feeding stuffs Determination of nitrogen content 

and calculation of crude protein content Part 2: Block 

digestion and steam distillation method 


TC 34 

DIS 6887-5:2008 

Microbiology of food and animal feeding stuffs 

Preparation of test samples, initial suspension and 

decimal dilutions for microbiological examination Part 5: 

Specific rules for the preparation of milk and milk 

products 


TC 34 

DIS 13720:2009 

Meat and meat products Enumeration of presumptive 

Pseudomonas spp. 


TC 34 

FDIS 16931:2009 


polymerized triglycerides by high-performance 

size-exclusion chromatography (HPSEC) 


TC 34 

FDIS 22959:2009 


polycyclic aromatic hydrocarbons by on-line 

donor-acceptor complex chromatography and HPLC with 

fluorescence detection 


TC 35 

DIS 1513:2008 

Paints and varnishes Preparation of test samples 


TC 35 

DIS 8503-1:2008 




Specifications and definitions for ISO surface profile 

comparators for the assessment of abrasive blast-cleaned 

surfaces 


TC 35 

DIS 8503-2:2008 




Method for the grading of surface profile of abrasive 

blast-cleaned steel - Comparator procedure 


TC 35 

DIS 8503-3:2008 






profile - Focusing microscope procedure 



TC 35 

DIS 8503-4:2008 





comparators and for the determination of surface profile 

- Stylus instrument procedure 


TC 35 

FDIS 9117-1:2009 

Paints and varnishes Drying tests Part 1: Determination 

of through-dry state and through-dry time 


TC 35 

FDIS 16773-3:2009 

Paints and varnishes 

Electrochemical impedance spectroscopy (EIS) on 

high-impedance coated specimens 

Part 3: Processing and analysis of data from dummy 

cells 


TC 35 

FDIS 16773-4:2009 


spectroscopy (EIS) on highimpedance coated specimens 

Part 4: Examples of spectra of polymer-coated specimens 


TC 35 

FDIS 28199-1:2009 


systems related to the application process Part 1: 

Relevant vocabulary and preparation of test panels 


TC 35 

FDIS 28199-2:2009 


systems related to the application process Part 2: Colour 

stability, process hiding power, re-dissolving, overspray 

absorption, wetting, surface texture and mottling 


TC 37 

DIS 26162:2009 

Systems to manage terminology, knowledge and content 

Design, implementation and maintenance of 

terminology management systems 


TC 38 

DIS 105-B07:2009 

Textiles Tests for colour fastness 

Part B07: Colour fastness to light of textiles wetted with 

artificial perspiration 


TC 38 

DIS 105-C08:2009 

Textiles Tests for colour fastness 

Part C08: Colour fastness to domestic and commercial 

laundering using a non-phosphate reference detergent 

incorporating a low temperature bleach activator 


TC 38 

DIS 2076:2008 

Textiles Man-made fibres Generic names 


TC 38 

DIS 12952-1:2008 


Part 1: Ignition source: smouldering cigarette 


TC 42 

DIS 5-1:2008 

Photography and graphic technology Spectral density 

measurements 

Part 1: Vocabulary, symbols and notations 


TC 42 

DIS 5-2:2008 


measurements 

Part 2: Geometric conditions for transmission density 


TC 42 

DIS 5-3:2008 


measurements 

Part 3: Spectral conditions 


TC 42 

DIS 5-4:2008 


measurements 

Part 4: Geometric conditions for reflection density 


TC 42 

DIS 18920:2008 

Imaging materials Reflection prints Storage practices 


TC 43 

FDIS 389-9:2009 

Acoustics Reference zero for the calibration of 

audiometric equipment 

Part 9: Preferred test conditions for the determination 

of reference hearing threshold levels 


TC 43 

FDIS 3382-1:2009 

Acoustics Measurement of room acoustic parameters Part 

1: Performance spaces 


TC 43 

ISO 3822-3:1997 /DAM 1:2008 

Acoustics Laboratory tests on noise emission from 

appliances and equipment used in water supply 

installations 

Part 3: Mounting and operating conditions for in-line 

valves and appliances 


TC 43 

DIS 10140-1:2008 


building elements Part 1: Test codes 


TC 43 

DIS 10140-2:2008 


building elements Part 2: Measurement of airborne sound 

insulation 


TC 43 


DIS 10140-3:2008 


building elements Part 3: Measurement of impact sound 

insulation 


TC 43 

DIS 10140-4:2008 

Acoustics Laboratory measurement of sound insulation 

of building elements Part 4: Measurement procedures 

and requirements 


TC 43 

DIS 10140-5:2008 


building elements Part 5: Requirements for test 

facilities and equipment 


TC 43 

DIS 10848-4:2008 

Acoustics Laboratory measurement of the flanking 

transmission of airborne and impact noise between 

adjoining rooms Part 4: All other cases 


TC 44 

DIS 7291:2008 

Gas welding equipment Pressure regulators for manifold 

systems used in welding, cutting and allied processes up 

to 30 000 kpA (300 bar) 


TC 44 

DIS 11745:2008 

Brazing for aerospace applications Qualification test of 

brazers and brazing operators Brazing of metallic 

components 


TC 44 

DIS 14171:2008 


electrodes and electrode/flux combinations for submerged 

arc welding of non alloy and fine grain steels 

Classification 


TC 44 

DIS 14174:2008 

Welding consumables Fluxes for submerged arc welding 

and electroslag welding Classification 


TC 44 

DIS 14341:2008 

Welding consumables Wire electrodes and deposits for gas 

shielded metal arc welding of non alloy and fine grain 

steels 

Classification 


TC 44 

FDIS 17663:2009 

Welding Quality requirements for heat treatment in 

connection with welding and allied processes 


TC 45 

DIS 813:2009 

Rubber, vulcanized or thermoplastic Determination of 

adhesion to a rigid substrate 90° peel method 


TC 45 

FDIS 4642-1:2008 

Rubber and plastics hoses, non-collapsible, for 

fire-fighting service — 

Part 1: Semi-rigid hoses for fixed systems 


TC 45 

DIS 10638:2009 

Raw rubber, latex, rubber compounds and rubber 

products Identification of antidegradants by gas 

chromatography/mass spectrometry 


TC 45 

DIS 11237:2008 

Rubber hoses and hose assemblies Compact 

wire-braidreinforced hydraulic types for oil-based or 

water-based fluids 

Specification 


TC 45 

DIS 12493:2009 

Rubber, vulcanized Determination of stress in tension on 

heating 


TC 46 

DIS 690:2008 

Information and documentation Guidelines for 

bibliographic references and citations to information 

resources 


TC 46 

FDIS 8459:2009 

Information and documentation Classification of 

bibliographic data elements for use in data interchange 


TC 46 

DIS 28560-1:2009 

Information and documentation 

RFID in librairies Part 1: General requirements and data 

elements 


TC 46 

DIS 28560-2:2009 

Information and documentation RFID in librairies 

Part 2: Encoding based on ISO/IEC 15962 


TC 46 

DIS 28560-3:2009 

Information and documentation 

RFID in librairies Part 3: Fixed length encoding 


TC 48 

DIS 4787:2008 

Laboratory glassware Volumetric instruments Methods for 

testing of capacity and for use 


TC 58 

DIS 11114-3:2008 

Transportable gas cylinders Compatibility of cylinder 

and valve materials with gas contents Part 3: Autogenous 

ignition test in oxygen atmosphere 


TC 59 

DIS 10845-1:2008 

Construction procurement Part 1: Processes, methods 

and procedures 



TC 59 

DIS 15686-10:2009 

Buildings and constructed assets Service life planning 

Part 10: When to assess functional performance 


TC 59 

DIS 15928-4:2008 

Houses Description of performance 

Part 4: Fire safety 


TC 59 

DIS 29481-1:2008 

Building information models 

Information delivery manual Part 1: Methodology and 

format 


TC 61 

DIS 179-1:2008 

Plastics Determination of Charpy impact properties Part 

1: Non-instrumented impact test 


TC 61 

DIS 1043-1:2008 

Plastics Symbols and abbreviated terms Part 1: Basic 

polymers and their special characteristics 


TC 61 

DIS 1043-2:2008 

Plastics Symbols and abbreviated terms Part 2: Fillers 

and reinforcing materials 


TC 61 

DIS 1890:2009 

Reinforcement yarns Determination of twist 


TC 61 

FDIS 25217:2009 

Adhesives Determination of the mode 1 adhesive fracture 

energy of structural adhesive joints using double 

cantilever beam and tapered double cantilever beam 

specimens 


TC 67 

ISO 15544:2000 /FDAM 1:2009 

Petroleum and natural gas industries 

Offshore production installations Requirements and 

guidelines for emergency response 

AMENDMENT 1 


TC 67 

FDIS 17078-3:2009 

Petroleum and natural gas industries Drilling and 

production equipment Part 3: Running tools, pulling 

tools and kick-over tools and latches for side-pocket 

mandrels 


TC 67 

DIS 19906:2009 

Petroleum and natural gas industries Arctic offshore 

structures 


TC 67 

DIS 28460:2009 

Petroleum and natural gas industries Installation and 

equipment for liquefied natural gas Ship-to-shore 

interface and port operations 


TC 68 

DIS 9362:2008 

Banking Banking telecommunication messages Bank 

identifier codes 


TC 68 

FDIS 11649:2009 

Financial services 

Core banking Structured creditor reference to 

remittance information 


TC 68 

DIS 20022-6:2008 

Financial services UNIversal Financial Industry 

message scheme 

Part 6: Message transport characteristics 


TC 69 

DIS 21748:2009 

Guidance for the use of repeatability, reproducibility 

and trueness estimates in measurement uncertainty 

estimation 


TC 71 

DIS 12439:2009 

Mixing water for concrete 


TC 76 

FDIS 8536-2:2008 

Infusion equipment for medical use Part 2: Closures for 

infusion bottles 


TC 76 

FDIS 8536-3:2009 

Infusion equipment for medical use Part 3: Aluminium 

caps for infusion bottles 


TC 76 

DIS 8536-6:2008 

Infusion equipment for medical use Part 6: Freeze drying 

closures for infusion bottles 


TC 77 

FDIS 8336:2009 

Fibre-cement flat sheets Product specification and test 

methods 


TC 77 

FDIS 9125:2009 

Fibre-cement slates and fittings Product specification 

and test methods 


TC 85 

DIS 26802:2009 

Nuclear facilities Criteria for the design and the 

operation of containment and ventilation systems for 

nuclear reactors 


TC 85 

DIS 27048:2009 

Radiation protection Dose assessment for the monitoring 

of workers for internal radiation exposure 



TC 87 

DIS 2219:2008 

Thermal insulation products for buildings Factory-made 

products of expanded cork (ICB) Specification 


TC 87 

DIS 8724:2008 

Cork decorative panels Specification 


TC 92 

DIS 1182:2008 

Reaction to fire tests for building and transport products 

Non-combustibility test 


TC 92 

DIS 1716:2008 


products Determination of the heat of combustion 


TC 92 

DIS 9239-1:2008 

Reaction to fire tests for floorings Part 1: Determination 

of the burning behaviour using a radiant heat source 


TC 92 

DIS 11925-2:2009 

Reaction to fire tests Ignitability of building products 

subjected to direct impingement of flame Part 

2:Single-flame source test 


TC 92 

FDIS 14696:2009 

Reaction-to-fire tests Determination of fire and thermal 

parameters of materials, products and assemblies using 

an intermediate-scale calorimeter (ICAL) 


TC 94 

ISO 13982-1:2004 /FDAM 1:2009 

Protective clothing for use against solid particulates 

Part 1: Performance requirements for chemical protective 

clothing providing protection to the full body against 

airborne solid particulates (type 5 clothing) 

AMENDMENT 1 


TC 94 

DIS 16900-1:2008 

Respiratory protective devices 

Methods of test and test equipment Part 1: 

Determination of inward leakage 


TC 94 

DIS 16900-3:2008 

Respiratory protective devices Methods of test and test 

equipment 

Part 3: Determination of particle filter penetration 


TC 94 

DIS 16900-4:2008 

Respiratory protective devices Methods of test and test 

equipment 

Part 4: Determination of gas filter capacity 


TC 96 

FDIS 4301-2:2009 

Appareils de levage à charge suspendue Classification 

Partie 2: Grues mobiles 


TC 96 

DIS 7752-1:2008 

Cranes Controls - Layout and characteristics Part 1: 

General principles 


TC 96 

DIS 7752-3:2008 

Cranes Controls - Layout and characteristics 

Part3: Tower cranes 


TC 96 

FDIS 10972-2:2009 

Cranes Requirements for mechanisms — 

Part 2: Mobile cranes 


TC 102 

FDIS 3082:2009 

Iron ores Sampling and sample preparation procedures 


TC 106 

ISO 7711-1:1997 /FDAM 1:2009 

Dental rotary instruments Diamond instruments Part 1: 

Dimensions, requirements, marking and packaging 


TC 106 

DIS 7885:2009 

Dentistry Sterile injection needles for single use 


TC 106 

DIS 9173-2:2009 

Dentistry Extraction forceps 

Part 2: Functional designation 


TC 106 

DIS 11953:2009 

Dentistry The performance of hand torque instruments for 

the clinical tightening of screw-retained joints in 

endosseous dental implant systems 


TC 106 

DIS 27020:2009 

Dentistry Brackets and tubes for use in orthodontics 


TC 106 

DIS 28158:2009 

Dentistry Integrated dental floss holders 


TC 108 

DIS 7919-4:2009 

Mechanical vibration Evaluation of machine vibration by 

measurements on rotating shafts 

Part 4: Gas turbine sets with fluid-film bearings 


TC 108 

DIS 10816-2:2009 

Mechanical vibration Evaluation of machine vibration by 

measurements on non-rotating parts Part 2: Land-based 

steam turbines and generators in excess of 50 MW with 

normal operating speeds of 1 500 r/min, 1 800 r/min, 3 

000 r/min and 3 600 r/min 



TC 108 

DIS 10816-4:2009 

Mechanical vibration Evaluation of machine vibration 

by measurements on non-rotating parts 

Part 2: Land-based steam turbines and generators in 

excess of 50 MW with normal operating speeds of 1 500 

r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min 


TC 108 

DIS 16063-41:2009 

Methods for the calibration of vibration and shock 

transducers Part 41: Calibration of laser vibrometers 


TC 108 

DIS 18436-5:2008 

Condition monitoring and diagnostics of machines 

Requirements for qualification and assessment of 

personnel Part 5: Lubricant laboratory technician/analyst 


TC 108 

FDIS 22266-1:2009 

Mechanical vibration Torsional vibration of rotating 

machinery Part 1: Land-based steam and gas turbine 

generator sets in excess of 50 MW 


TC 112 

DIS 27892:2008 

Vacuum technology Turbomolecular pumps Measurement 

of rapid shutdown torque 


TC 112 

DIS 27895:2008 

Vacuum technology Valves Leak test 


TC 119 

FDIS 3327:2009 



TC 119 

FDIS 18549-1:2009 

Metallic powders Determination of apparent density and 

flow rate at elevated temperatures Part 1: Determination 

of apparent density at elevated temperatures 


TC 119 

FDIS 18549-2:2009 

Metallic powders Determination of apparent density and 

flow rate at elevated temperatures 

Part 2: Determination of flow rate at elevated 

temperatures 


TC 119 

DIS 23519:2008 

Sintered metal materials, excluding hardmetals 

Measurement of surface roughness 


TC 119 

DIS 28279:2008 

Sintered metal materials Determination of cleanliness of 

metallic- powder parts 


TC 121 

FDIS 27427:2009 

Anaesthetic and respiratory equipment Nebulizing 

systems and components 


TC 130 

FDIS 12637-3:2009 

Graphic technology Vocabulary 

Part 3: Printing terms 


TC 130 

DIS 12643-1:2008 

Graphic technology Safety requirements for graphic 

technology equipment and systems 



TC 130 

DIS 12643-4:2008 

Graphic technology Safety requirements for graphic 

technology equipment and systems 

Part 4: Converting equipment and systems 


TC 131 

DIS 11171:2009 

Hydraulic fluid power Calibration of automatic particle 

counters for liquids 


TC 138 

DIS 3213:2008 

Polypropylene (PP) pipes Effect of time and temperature 

on expected strength 


TC 145 

DIS 28564-1:2009 

Public information guidance systems Part 1: Design 

principles and element requirements for location plans, 

maps and diagrams 


TC 146 

FDIS 15337:2009 



TC 146 

FDIS 16000-14:2009 

Indoor air Part 14: Determination of total (gas and 

particle-phase) polychlorinated dioxin-like biphenyls 

(PCBs) and polychlorinated 

dibenzo-pdioxins/dibenzofurans (PCDDs/PCDFs) - 

Extraction, clean-up and analysis by high-resolution gas 

chromatography and mass spectrometry 


TC 147 

DIS 10710:2008 

Water quality Growth inhibition test with the marine 

and brackish water macroalgae Ceramium tenuicorne 


TC 147 

DIS 10872:2009 

Water quality Determination of the toxic effect of 

sediment and soil samples on growth, fertility and 

reproduction of 

Caenorhabditis elegans (Nematoda) 


TC 147 

DIS 27108:2008 

Water quality Determination of selected plant 

treatment agents and biocide products Method using 

solid-phase microextraction (SPME) followed by gas 

chromatography-mass pectrometry (GC-MS) 



TC 150 

FDIS 11663:2009 

Quality of dialysis fluid for haemodialysis and related 

therapies 


TC 150 

FDIS 13958:2009 

Concentrates for haemodialysis and related therapies 


TC 150 

FDIS 13959:2009 

Water for haemodialysis and related therapies 


TC 150 

FDIS 15674:2009 

Cardiovascular implants and artificial organs Hard-shell 

cardiotomy/venous reservoir systems (with/without filter) 

and soft venous reservoir bags 


TC 150 

FDIS 15675:2009 

Cardiovascular implants and artificial organs 

Cardiopulmonary bypass systems Arterial blood line 

filters 


TC 150 

FDIS 26722:2009 

Water treatment equipment for haemodialysis applications 

and related therapies 


TC 159 

DIS 9241-210:2008 

Ergonomics of human-system interaction Part 210: 

Human-centred design for interactive systems 


TC 160 

DIS 20492-3:2008 

Glass in buildings Insulating glass 

Part 3: Gas concentration and gas leakage 


TC 160 

DIS 20492-4:2008 

Glass in buildings Insulating glass 

Part 4: Methods of test for the physical attributes of edge 

seals 


TC 163 

DIS 18393-1:2008 

Thermal insulation products Determination of ageing by 

settlement 

Part 1: Blown loose fill for ventilated attics 


TC 164 

DIS 26843:2008 

Metallic materials Measurement of fracture toughness of 

steels at impact loading rates using precracked Charpy 

specimens 


TC 165 

DIS 21581:2009 

Timber structures Static and cyclic lateral load test 

method for shear walls 


TC 171 

DIS 29861:2009 

Document management applications Quality control for 

scanning office documents in colour 


TC 172 

DIS 9211-2:2008 

Optics and photonics Optical coatings 

Part 2: Optical properties 


TC 172 

DIS 15752:2009 

Ophthalmic instruments Endoilluminators Fundamental 

requirements and test methods for optical radiation 

safety 


TC 172 

DIS 17123-1:2008 

Optics and optical instruments Field procedures for 

testing geodetic and surveying instruments 

Part1: Theory 


TC 172 

DIS 21254-1:2008 

Lasers and laser-related equipment Test methods of laser 

radiation-induced damage threshold Part 1: Definitions 

and general principles 


TC 172 

DIS 21254-2:2008 



Threshold determination 


TC 173 

FDIS 7176-9:2008 

Wheelchairs Part 9: Climatic tests for electric 

wheelchairs 


TC 173 

FDIS 7176-21:2009 

Wheelchairs 

Part 21: Requirements and test methods for 

electromagnetic compatibility of electrically powered 

wheelchairs and scooters, and battery chargers 


TC 173 

FDIS 24415-1:2009 

Tips for assistive products for walking 

Requirements and test methods Part 1: Friction of tips 


TC 182 

FDIS 22476-12:2009 

Geotechnical investigation and testing 

Field testing Part 12: Mechanical cone penetration test 

(CPTM) 


TC 184 

DIS 20242-2:2008 

Industrial automation systems and integration Service 

interface for testing applications 

Part 2: Resource management service interface 


TC 184 

DIS 21254-3:2008 

Lasers and laser-related equipment Test methods for 



Assurance of laser power (energy) handling capabilities 


TC 188 

FDIS 10088:2009 

Small craft Permanently installed fuel systems 


TC 188 

FDIS 10862:2009 

Small craft Quick release system for trapeze harness 


TC 188 

FDIS 12215-8:2009 

Small craft Hull construction and scantlings Part 8: 

Rudders 


TC 188 

ISO 15085:2003 /FDAM 1:2009 

Small craft Man-overboard prevention and recovery 

Amendment 1 


TC 189 

DIS 10545-6:2008 

Ceramic tiles 

Part 6: Determination of resistance to deep abrasion for 

unglazed tiles 


TC 189 

DIS 10545-16:2009 

Ceramic tiles 

Part 16: Determination of small colour differences 


TC 194 

FDIS 10993-5:2009 

Biological evaluation of medical devices 

Part 5: Tests for in vitro cytotoxicity 


TC 199 

ISO 11161:2007 /DAM 1:2008 

Safety of machinery Integrated manufacturing systems 

- Basic requirements Amendment 1 


TC 201 

DIS 29081:2009 

Surface chemical analysis Auger electron spectroscopy 

Reporting of methods used for charge control and charge 

correction 


TC 204 

DIS 17573:2009 

Electronic fee collection — Systems architecture for 

vehicle related tolling 


TC 204 

DIS 22840:2009 

Intelligent transport systems Devices to aid reverse 

manoeuvres Extended range backing aid systems 

(ERBA) 


TC 204 

DIS 24534-2:2008 

Automatic vehicle and equipment identification Electronic 

Registration Identification (ERI) for vehicles Part 2: 

Operational requirements 


TC 204 

DIS 24534-3:2008 

Automatic vehicle and equipment identification Electronic 

Registration Identification (ERI) for vehicles Part 3: 

Vehicle data 


TC 204 

DIS 24534-4:2008 



vehicles Part 4: Secure communications using 

asymmetrical techniques 


TC 204 

DIS 25111:2008 

CALM using Public Networks General requirements 


TC 204 

DIS 25112:2008 

Intelligent transport systems Communications access 

for land mobiles (CALM) Mobile wireless broadband 

using IEEE 802.16e/IEEE 802.16g 


TC 204 

DIS 25113:2008 

Intelligent transport systems Communications access 

for land mobiles (CALM) Mobile wireless broadband 

using high capacity spatial division multiple access 

(HC-SDMA) 


TC 207 

DIS 14005:2008 

Environmental management systems Guidelines for the 

phased implementation of an environmental management 

system, including the use of environmental performance 

evaluation 


TC 211 

DIS 19146:2008 

Geographic information Cross-domain vocabularies 


TC 212 

FDIS 15193:2009 

In vitro diagnostic medical devices 

Measurement of quantities in samples of biological 

origin Requirements for content and presentation of 

reference measurement procedures 


TC 212 

FDIS 15194:2009 



for certified reference materials and the content of 

supporting documentation 


TC 215 

DIS 10781:2009 

Health informatics HL7 Electronic health record system 

functional model, release 1 


TC 215 

FDIS 11073-91064:2009 

Health informatics Standard communication protocol 

Part 91064: Computer-assisted electrocardiography 



TC 215 

DIS 21091:2008 

Health informatics Directory services for security, 

communications and identification of professional and 

patients 


TC 217 

DIS 24444:2009 

Cosmetics Sun protection test methods in vivo 

determination of SPF (Sun Protection Factor) 


TC 219 

FDIS 4918:2009 

Resilient, textile and laminate floor coverings Castor 

chair test 


TC 219 

DIS 10580:2008 

Resilient, textile and laminate floor coverings Test 

method for emissions of volatile organic compounds 

(VOC) 



6.2 Comités Técnicos da ISO 

Lista dos Comités Técnicos da Organização Internacional de Normalização (ISO) em relação aos quais não existe ONS 

(Organismo de Normalização Sectorial) ou CT (Comissão Técnica) e cujos processos se encontram disponíveis para 

consulta no IPQ 

ISO/TC 4 

Rolling bearings 

ISO/TC 12 

Quantities, units, symbols, conversion factors 

ISO/TC 14 

Shafts for machinery and accessories 

ISO/TC 19 

Preferred numbers 

ISO/TC 20 

Aircraft and space vehicles 

ISO/TC 24 

Sieves, sieving and other sizing methods 

ISO/TC 25 

Cast iron and pig iron 

ISO/TC 36 

Cinematography 

ISO/TC 37 

Terminology (principles and coordination) 

ISO/TC 41 

Pulleys and belts (including veebelts) 

ISO/TC 42 

Photography 

ISO/TC 47 

Chemistry 

ISO/TC 48 

Laboratory glassware and related apparatus 

ISO/TC 57 

Metrology and properties of surfaces 

ISO/TC 59 

Building construction 

ISO/TC 60 

Gears 

ISO/TC 65 

Manganese and chromium ores 

ISO/TC 67 

Materials, equipment and offshore structures for 

petroleum and natural gas industries 

ISO/TC 70 

Internal combustion engines 

ISO/TC 81 

Common names for pesticides and other agrochemicals 

ISO/TC 83 

Sports and recreation equipment 

ISO/TC 85 

Nuclear energy 

ISO/TC 86 

Refrigeration 

ISO/TC 100 

Chains and chain wheels for power transmission and 

conveyors 

ISO/TC 101 

Continuous mechanical handling equipment 

ISO/TC 102 

Iron ores 

ISO/TC 110 

Industrial trucks 

ISO/TC 112 

Vacuum technology 

ISO/TC 113 

Hydrometric determinations 

ISO/TC 114 

Horology 

ISO/TC 115 

Pumps 

ISO/TC 116 

Space heating appliances 

ISO/TC 117 

Industrial fans 


ISO/TC 118 

Compressors, pneumatic tools and pneumatic machines 

ISO/TC 119 

Powder metallurgy 

ISO/TC 120 

Leather 

ISO/TC 123 

Plain bearings 

ISO/TC 127 

Earth-moving machinery 

ISO/TC 131 

Fluid power systems 

ISO/TC 132 

Ferroalloys 

ISO/TC 137 

Sizing system, designations and marking for boots and 

shoes 

ISO/TC 153 

Valves 

ISO/TC 154 

Documents and data elements in administration, 

commerce and industry 

ISO/TC 155 

Nickel and nickel alloys 

ISO/TC 163 

Thermal insulation 

ISO/TC 166 

Ceramic ware, glassware and glass ceramic ware in 

contact with food 

ISO/TC 167 

Steel and aluminium structures 

ISO/TC 170 

Surgical instruments 

ISO/TC 173 

Technical systems and aids for disabled or handicapped 

persons 

ISO/TC 179 

Masonry 

ISO/TC 182 

Geotechnics 

ISO/TC 183 

Copper, lead and zinc ores and concentrates 

ISO/TC 184 

Industrial automation systems and integration 

ISO/TC 185 

Safety devices for protection against excessive pressure 

ISO/TC 190 

Soil quality 

ISO/TC 191 

Humane animal (mammal) traps 

ISO/TC 192 

Gas turbines 

ISO/TC 195 

Building construction machinery and equipment 

ISO/TC 197 

Hydrogen energy technologies 

ISO/TC 202 

Microbeam analysis 

ISO/TC 203 

Technical energy systems 

ISO/TC 204 

Transport information and control systems 

ISO/TC 205 

Building environmental design 

ISO/TC 206 

Fine ceramics 

ISO/TC 207 

Management environnemental 

ISO/TC 208 

Thermal turbines for industrial application (steam 

turbines, gas expansion turbines) 

ISO/TC 174 

Jewellery 

ISO/TC 175 

Fluorspar 

ISO/TC 177 

Caravans 


7. Projectos de Norma e propostas de estudo de novas Normas da Comissão 

Electrotécnica Internacional (IEC) 

Os projectos de normas e propostas de estudo de novas normas estão organizadas por Comités Técnicos. 



SC 3C 

CDV 600417-C00076:2008 

Change request applied to IEC 60417-5727 and IEC 

60417-5769 


SC 17B 

IEC 60947-5-1:2003 /FDIS A1:2009 

Low-voltage switchgear and controlgear Part 5-1: Control 

circuit devices and switching elements - 

Electromechanical control circuit devices 


SC 17B 

FDIS 60947-7-1:2009 

Low-voltage switchgear and controlgear 

Part 7-1: Ancillary equipment - Terminal blocks for 

copper conductors 


SC 17B 

FDIS 60947-7-2:2009 

Low-voltage switchgear and controlgear 

Part 7-2: Ancillary equipment - Protective conductor 

terminal blocks for copper conductors 


SC 17B 

FDIS 60947-7-3:2009 


Ancillary equipment - Safety requirements for fuse 

terminal blocks 


SC 17A 

FDIS 62271-104:2009 

High-voltage switchgear and controlgear Part 104: 

Alternating current switches for rated voltages of 52 kV 

and above 


SC 23G 

IEC 60320-2-4:2005 /CDV A1:2008 

Appliance couplers for household and similar general 

purposes Part 2-4: Appliance couplers dependent on 

appliance weight for engagement 


SC 23B 

CDV 60669-1:2009 




SC 23B 

IEC 60670-1:2002 /CDV A1:2009 





SC 23B 

CDV 60670-24:2009 



24: Particular requirements for enclosures for housing 

protective devices and other power dissipating electrical 

equipment 


SC 23B 

IEC 60884-1:2002 /CDV A2:2009 

Plugs and socket-outlets for household and similar 

purposes Part 1: General requirements 


SC 23B 

CDV 60884-2-7:2009 

Plugs and socket-outlets for household and similar 

purposes Part 2-7: Particular requirements for cord 

extension sets 


SC 23C 

FDIS 60906-1:2009 

IEC System of plugs and socket-outlets for household and 

similar purposes Part 1: Plugs and socket-outlets 16 A 

250 V a.c 


SC 23E 

CDV 62423:2008 

Type F and type B residual current operated 

circuit-breakers with and without integral overcurrent 

protection for household and similar uses 


SC 23A 

CDV 62444:2009 

Cable glands for electrical installations 


SC 31J 

FDIS 60079-10-2:2009 

Explosive atmospheres Part 10-2: Classification of areas 

- Combustible dust atmospheres 


SC 32B 

IEC 60269-1:2006 /FDIS A1:2009 

Low-voltage fuses - General requirements 


SC 32B 

FDIS 60269-4:2009 

Low-voltage fuses Part 4 - Supplementary requirements 

for fuse-links for the protection of semiconductor devices 



SC 32A 

CDV 60644:2008 

Specification for high voltage fuse-links for motor circuit 

application 


SC 32C 

IEC 60691:2002 /CDV A2:2009 

Thermal-links - Requirements and application guide 


SC 34B 

IEC 60061-1:1969 /FDIS A41:2009 



caps 


SC 34B 

IEC 60061-1:1969 /CDV A43:2009 



caps 


SC 34B 

IEC 60061-2:1969 /FDIS A38:2009 


control of interchangeability and safety 

Part 2: Lampholders 


SC 34B 

IEC 60061-2:1969 /CDV A40:2009 


control of interchangeability and safety 

Part 2: Lampholders 


SC 34B 

IEC 60061-3:1969 /FDIS A39:2009 


control of interchangeability and safety Part 3: Gauges 


SC 34B 

IEC 60061-3:1969 /CDV A41:2009 


control of interchangeability and safety Part 3: Gauges 


SC 34A 

IEC 60081:1997 /CDV A4:2008 

Double-capped fluorescent lamps - Performance 



SC 34C 

CDV 61347-2-2:2008 

Lamp controlgear Part 2-2: Particular requirements for 

d.c. or a.c. supplied electronic step-down convertors for 

filament lamps 


SC 34C 

IEC 62384:2006 /CDV A1:2008 

DC or AC supplied electronic control gear for LED 

modules - Performance requirements 


SC 34C 

FDIS 62386-102:2009 

Digital addressable lighting interface Part 102: General 

requirements - Control gear 


SC 34C 

FDIS 62386-203:2009 


Particular requirements for control gear - Discharge 

lamps (excluding fluorescent lamps) (device type 2) 


SC 34C 

FDIS 62386-204:2009 


Particular requirements for control gear - Low voltage 

halogen lamps (device type 3) 


SC 45A 

FDIS 60768:2009 

Nuclear Power Plants - Instrumentation importantto safety 

- Equipment for continuous in-line or on-line monitoring 

of radioactivity in process streams for normal and 

incident conditions 


SC 45B 

FDIS 60846-1:2009 

Radiation protection instrumentation - Ambient and/or 

directional dose equivalent (rate) meters and/or 

monitors for beta, X and gamma radiation Part 1: 

Portable workplace and environmental meters and 

monitors 


SC 45B 

CDV 61526:2008 

Radiation protection instrumentation - Measurement of 

personal dose equivalents Hp(10) and Hp(0,07) for X, 

gamma, neutron and beta radiations - Direct reading 

personal dose equivalent meters 


SC 45B 

FDIS 61559-1:2009 

Radiation protection instrumentation in nuclear facilities 

- Centralized systems for continuous monitoring of 

radiation and/or levels of radioactivity Part 1: General 

requirements 


SC 45A 

FDIS 61772:2009 

Nuclear power plants - Control rooms - Application of 

Visual Display Units (VDUs) 


SC 45B 

CDV 62463:2008 

Radiation protection instrumentation - X-ray Systems for 

the screening of persons for security and the carrying of 

illicit items 


SC 45A 

CDV 62465:2008 

Nuclear Power Plants - Instrumentation and control 

important to safety - Management of aging of electrical 

cabling systems 


SC 45B 

CDV 62484:2008 

Radiation protection instrumentation - Spectroscopy-based 

portal monitors used for the detection and identification of 

illicit trafficking of radioactive material 



SC 45B 

CDV 62533:2009 

Radiation protection instrumentation - Highly sensitive 

hand-held instruments for photon detection of 

radioactive material 


SC 45B 

CDV 62534:2008 

Radiation protection instrumentation - Highly sensitive 

hand-held instruments for neutron detection of 

radioactive material 


SC 46C 

CDV 61156-2:2008 

Multicore and symmetrical pair/quad cables for digital 

communications Part 2:Symmetrical pair/quad cables with 

transmission characteristics up to100 MHz- Horizontal 

floor wiring-Blank Detail Specification 


SC 46C 

FDIS 61156-3-1:2009 


communications Part 3-1: Work area wiring - Blank 

detail specification 


SC 46C 

FDIS 61156-4:2009 


communications Part 4: Riser cables - Sectional 

specification 


SC 46C 

FDIS 61156-4-1:2009 


communications Part 4-1: Riser cables - Blank detail 

specification 


SC 46C 

FDIS 61156-8:2009 


communications Part 8: Symmetrical pair/quad cableswith 

transmission characteristics up to 1 200 MHz - Work area 

wiring - Sectional specification 


SC 46F 

CDV 61169-39:2008 

Radio-frequency connectors Part 39: Sectional 

Specification for CQM series quick lock RF Connectors 


SC 46F 

CDV 62562:2009 

Cavity resonator method to measure the complex 

permittivity of low-loss dielectric plates 


SC 47D 

CDV 60191-6:2009 

Mechanical standardization of semiconductor devices 

Part 6 : General rules for the preparation of outline 

drawings of surface mounted semiconductor device 

packages 


SC 47F 

FDIS 62047-6:2009 

Semiconductor devices - Micro-electromechanical 


Part 6: Axial fatigue testing methods of thin film 

materials 


SC 48D 

CDV 60297-3-106:2009 

Mechanical structures for electronic equipment - 

Dimensions of mechanical structures of the 482,6 mm (19 

in) series Part 3-106: Adaptation dimensions for 

subracks and chassis applicable with metric cabinets or 

racks in accordance with IEC 60917-2-1 


SC 48B 

FDIS 60603-7-1:2009 



connectors 


SC 48B 

CDV 60603-7-41:2008 


specification for 8-way, un-shielded, free and fixed 


to 500 MHz 


SC 48B 

CDV 60603-7-51:2008 




to 500 MHz 


SC 48B 

CDV 60603-7-71:2009 

Connectors for electronic equipment 

Part 7-71: Detail specification for 8-way, shielded, 

free and fixed connectors, for data transmission with 

frequencies up to 1 000 MHz 


SC 48D 

CDV 60917-2-4:2009 

Modular order for the development of mechanical 

structures for electronic equipment practices Part 2-4: 

Sectional specification - Interface coordination 

dimensions for the 25 mm equipment practice - 

Adaptation dimensions for subracks or chassis applicable 

in cabinets or racks in accordance with IEC 60297-3-100 

(19 in) 


SC 48B 

FDIS 61076-3-114:2009 

Connectors for electronic equipment -Product 



shielded and unshielded connectors for frequencies up to 

600 MHz for industrial environments incorporating the 

IEC 60603-7 series interface - Variant 11 related to IEC 

61076-3-106 - Bayonet coupling typ 


SC 48B 

FDIS 61076-3-117:2009 




shielded and unshielded connectors for industrial 

environments incorporating the IEC 60603-7 series 

interface - Variant 14 related to IEC 61076-3-106 - 

Push-pull coupling 



SC 59A 

IEC 60436:2004 /CDV A1:2008 

Electric dishwashers for household use - Methods for 

measuring the performance 


SC 59C 

CDV 60704-2-2:2008 

Household and similar electrical appliances - Test code 

for the determination of airborne acoustical noise Part 

2-2: Particular requirements for fan heaters 


SC 61C 

CDV 60335-2-24:2008 


2-24: Particular requirements for refrigerating 

appliances, ice-cream appliances and ice makers 


SC 61C 

CDV 60335-2-89:2008 


2-89: Particular requirements for commercial 

refrigerating appliances with an incorporated or remote 

refrigerant condensing unit or compressor 


SC 62D 

CDV 60601-2-4:2009 


requirements for basic safety and essential performance of 

cardiac defibrillators 


SC 62D 

CDV 60601-2-23:2009 



of transcutaneous partial pressure monitoring equipment 


SC 62C 

CDV 60601-2-25:2009 



of electrocardiographs 


SC 62D 

CDV 60601-2-27:2009 

Medical electrical equipment 

Part 2-27: Particular requirements for basic safety and 

essential performance of electrocardiographic 

monitoring equipment 


SC 62B 

CDV 60601-2-28:2008 



of X-ray tube assemblies for medical diagnosis 


SC 62D 

CDV 60601-2-34:2009 



of invasive blood pressure monitoring equipment 


SC 62D 

CDV 60601-2-46:2009 



of operating tables 


SC 62D 

CDV 60601-2-49:2009 



of multifunction patient monitoring equipment 


SC 62B 

CDV 60613:2008 

Electrical and loading characteristics of X -ray tube 

assemblies for medical diagnosis 


SC 65B 

FDIS 60534-2-4:2009 

Industrial-process control valves Part 2-4: Flow capacity 

- Inherent flow characteristics and rangeability 


SC 65B 

CDV 60534-7:2009 

Industrial-process control valves Part 7: Control valve 

data sheet 


SC 65B 

CDV 61003-2:2008 

Industrial-process control systems - Instruments with 

analogue inputs and two- or multi-state outputs Part 2: 

Guidance for inspection and routine testing 


SC 65C 

PAS 61158-Series:2009 

IEC 61158 series: Industrial communication networks - 

Fieldbus specifications X 


SC 65A 

CDV 61508-1:2008 


electronic safety-related systems Part 1: General 

requirements 


SC 65A 

CDV 61508-2:2008 


electronic safety-related systems Part 2: Requirements 

for electrical/electronic/programmable electronic 

safety-related systems 


SC 65A 

CDV 61508-3:2008 



requirements 


SC 65A 

CDV 61508-3:2008 



requirements 


SC 65A 

CDV 61508-4:2008 


electronic safety-related systems Part 4: Definitions and 

abbreviations 



SC 65A 

CDV 61508-5:2008 


electronic safety-related systems Part 5: Examples of 

methods for the determination of safety integrity levels 


SC 65A 

CDV 61508-6:2008 





SC 65A 

CDV 61508-6:2008 





SC 65A 

CDV 61508-7:2008 





SC 65A 

CDV 61508-7:2008 





SC 65C 

CDV 61784-3:2009 

Industrial communication networks - Profiles 

Part 3: Functional safety fieldbuses 


SC 65C 

PAS 61784-Series:2009 

IEC 61784 series: Industrial communication networks - 

profiles 


SC 65C 

CDV 62439-1:2008 

Industrial communication networks: high availability 

automation networks Part 1: General concepts and 

calculation methods (including RSTP) 


SC 65C 

CDV 62439-2:2008 


automation networks Part 2: Media Redundancy 

Protocol (MRP) 


SC 65C 

CDV 62439-3:2008 


automation networks Part 3: Parallel Redundancy 

Protocol (PRP) and High availability Seamless Ring 

(HSR) 


SC 65C 

CDV 62439-4:2008 


automation networks Part 4: Cross-network Redundancy 

Protocol (CRP) 


SC 65C 

CDV 62439-5:2008 


automation networks Part 5: Beacon Redundancy 

Protocol (BRP) 


SC 65C 

CDV 62439-6:2008 


automation networks Part 6: Distributed Redundancy 

Protocol (DRP) 


SC 77B 

CDV 61000-4-8:2008 


and measurement techniques - Power frequency magnetic 

field immunity test 


SC 77A 

IEC 61000-4-13:2002 /CDV A1:2008 


and measurement techniques - Harmonics and 

interharmonics including mains signalling at a.c. power 

port, lowfrequency immunity tests 


SC 77B 

IEC 61000-4-14:1999 /CDV A2:2008 


and measurement techniques -Voltage fluctuation 

immunity test 


SC 77A 

CDV 61000-4-20:2008 


and measurement techniques - Emission and immunity 

testing in transverse electromagnetic (TEM) waveguides 

- Basic EMC Publication 


SC 77A 

CDV 61000-4-20:2008 


and measurement techniques - Emission and immunity 

testing in transverse electromagnetic (TEM) waveguides 

- Basic EMC Publication 


SC 77A 

IEC 61000-4-34:2005 /CDV A1:2008 


and measurement techniques - Voltage dips, short 

interruptions and voltage variations immunity tests for 

equipment with input current more than 16 A per phase 


SC 86B 

CDV 61300-2-12:2008 



2-12: Tests - Impact 


SC 86B 

CDV 61300-2-21:2009 



2-21: Tests - Composite temperature-humidity cyclic test 


SC 86B 

FDIS 61300-2-34:2009 




2-34: Tests - Resistance to solvents and contaminating 

fluids of interconnecting components and closures 


SC 86B 

CDV 61300-3-22:2008 


components - Basic test and measurement procedures 

Part 3-22: Examinations and measurements - Ferrule 

compression force 


SC 86B 

CDV 61754-24:2008 


components - Fibre optic connector interfaces Part 24- 

Type SC-RJ connector family 


SC 86B 

CDV 61978-1:2008 

Fibre optic passive chromatic dispersion compensators 

Part 1: Generic specification 


SC 86C 

CDV 62150-4:2009 

Fibre optic active components and devices - Basic test 

and measurement procedures Part 4: Relative intensity 

noise using a time-domain optical detection system 


SC CISPR/B 

FDIS 11:2009 





SC CISPR/I 

CDV 24:2009 

Information technology equipment - Immunity 

characteristics - Limits and methods of measurement 


TC 1 

FDIS 60050-103:2009 

International Electrotechnical Vocabulary Part 103: 

Mathematics - Functions 


TC 1 

CDV 60050-113:2008 


Physics for electrotechnology 


TC 2 

CDV 60034-1:2008 

Rotating electrical machines Part 1: Rating and 

performance 


TC 2 

CDV 60034-2-2:2008 

Rotating electrical machines Part 2-2: Specific methods 

for determining separate losses of large machines from 

tests, supplementing Part 2-1 


TC 2 

CDV 60034-18-1:2008 

Rotating electrical machines Part 18-1: Functional 

evaluation of insulation systems - General guidelines 


TC 3 

CDV 60617:2008 

Extended procedure for change request C00159: 

symbols S01844, S01845 


TC 3 

CDV 60617:2008 

Extended procedure for change request C00159: 

symbols S01855 - S01858 


TC 7 

CDV 61394:2008 

Overhead lines-Requirements for greases for 

aluminium,aluminium alloy and steel bare conductors 


TC 9 

CDV 61881-1:2009 

Railway applications - Rolling stock equipment - 

Capacitors for power electronics Part 1: Requirements, 

tests and general information 


TC 9 

FDIS 62313:2009 

Railway applications - Power supply and rolling stock - 

Technical criteria for the coordination between power 

supply (substation) and rolling stock 


TC 9 

CDV 62621:2009 

Railway applications - Fixed installations - Electric 

traction - Special requirements for composite insulators 


TC 10 

CDV 60666:2008 

Detection and determination of specified additives in 

mineral insulating oils 


TC 13 

CDV 60728-13:2008 


interactive services Part 13: Optical systems for 

broadcast signal transmissions (TA 5) 


TC 13 

CDV 62059-32-1:2009 





TC 13 

CDV 62059-32-1:2009 





TC 15 

CDV 60684-3-209:2008 


individual types of sleeving Sheet 209: Heat-shrinkable 

polyolefin sleeving, general purpose, flame retarded 


TC 15 

CDV 60684-3-280:2008 



polyolefin sleeving, Anti-tracking 



TC 15 

CDV 60684-3-281:2008 



polyolefin sleeving, Semi conductive 


TC 15 

CDV 60684-3-282:2008 



polyolefin sleeving, Stress 


TC 15 

CDV 60684-3-283:2008 



polyolefin sleeving,for bus-bar insulation 


TC 15 

CDV 60684-3-116&117:2008 


individual types of sleeving Sheets 116 to 117: Extruded 

polychloroprene, general purpose 


TC 15 

IEC 60893-3-2:2003 /CDV A1:2009 



3-2: Specification for individual materials - 

Requirements for rigid laminated sheets based on epoxy 

resins 


TC 15 

IEC 60893-3-3:2003 /CDV A1:2009 





melamine resins 


TC 15 

IEC 60893-3-4:2003 /CDV A1:2009 





phenolic resins 


TC 15 

IEC 60893-3-5:2003 /CDV A1:2009 





polyester resins 


TC 15 

IEC 60893-3-6:2003 /CDV A1:2009 




Requirements for rigid laminated sheets based on silicone 

resins 


TC 15 

IEC 60893-3-7:2003 /CDV A1:2009 





polyimide resins 


TC 15 

CDV 62329-3-100:2009 




Heat-shinkable moulded shape 62 dimensions 


TC 15 

CDV 62329-3-101:2009 




Heat-shinkable moulded shapes, polyolefin, semi-rigid, 

limited fire hazard, material requirements and system 

performance 


TC 15 

CDV 62329-3-102:2009 




Heat-shinkable elastomeric moulded shapes, semi-rigid, 

material requirements and system performance 


TC 18 

PAS 60092-510:2009 

Electrical installations in ships - Special features - 

High-voltage shore connection systems 


TC 20 

FDIS 60331-1:2009 

Tests for electric cables under fire conditions - Circuit 

integrity Part 1: Test method for fire with shock at a 

temperature of at least 830 °C for cables of rated 

voltage up to and including 0,6/1,0 kV and with an 

overall diameter exceeding 20 mm 


TC 20 

FDIS 60331-2:2009 



temperature of at least 830 °C for cables of rated 

voltage up to and including 0,6/1,0 kV and with an 

overall diameter not exceeding 20 mm 


TC 20 

FDIS 60331-3:2009 



temperature of at least 830 °C for cables of rated voltage 

up to and including 0,6/1,0 kV tested in a metal 

enclosure 


TC 20 

IEC 60331-11:1999 /FDIS A1:2009 


integrity Part 11: Apparatus - Fire alone at a flame 

temperature of at least 750 °C 



TC 20 

IEC 60502-1:2004 /CDV A1:2008 

Power cables with extruded insulation and their 

accessories for rated voltages from 1 kV (Um = 1,2 kV) 

up to 30 kV (Um = 36 kV) Part 1: Cables for rated 

voltages of 1 kV (Um = 1,2 kV) and 3 kV (Um =3,6 kV) 


TC 26 

CDV 60974-6:2008 

Arc welding equipment Part 6: Limited duty power 

sources 


TC 26 

CDV 60974-11:2008 

Arc welding equipment Part 11: Electrode holders 


TC 29 

CDV 60318-4:2008 

Electroacoustics - Simulators of human head and ear 

Part 4: Occluded-ear simulator for the measurement of 

earphones coupled to the ear by means of ear inserts 

(Revision of IEC 60711:1981) 


TC 29 

FDIS 60645-6:2009 

Electroacoustics - Audiometric equipment - Part 6: 

Instruments for the measurement of otoacoustic 

emissions 


TC 29 

FDIS 60645-7:2009 


Instruments for the measurement of auditory brainstem 

responses 


TC 29 

CDV 62489-1:2008 



measuring and specifying the performance of system 

components 


TC 29 

CDV 62489-2:2009 



calculating and measuring the low-frequency magnetic 

field emissions from the loop for assessing conformity 

with guidelines on limits for human exposure 


TC 31 

CDV 60079-13:2009 

Explosive atmospheres Part 13: Equipment - protected by 

pressurized rooms ""p"" 


TC 31 

FDIS 60079-18:2009 

Explosive atmospheres 

Part 18: Equipment protection by encapsulation ""m"" 


TC 31 

CDV 60079-29-4:2008 

Explosive atmospheres Part 29-4: Gas Detectors 


TC 31 

CDV 60079-29-4:2008 

Explosive atmospheres Part 29-4: Gas Detectors - 

Performance requirements of open path detectors for 

flammable gases 


TC 40 

FDIS 60286-3-1:2009 



continuous tapes - Type V - Pressed carrier tapes 


TC 40 

FDIS 60286-3-2:2009 



continuous tapes - Type VI - Blister carrier tapes of 4 

mm width 


TC 40 

IEC 60738-1:2006 /CDV A1:2008 

Thermistors - Directly heated positive temperature 

coefficient Part 1: Generic specification 


TC 44 

CDV 60204-33:2008 

Safety of machinery - Electrical equipment of machines 

Part 33: Requirements for semiconductor fabrication 

equipment 


TC 46 

FDIS 62153-4-10:2009 

Metallic communication cable test methods Part 4-10: 

Electromagnetic compatibility (EMC) - Shielded 

screening attenuation test method for measuring the 

screening effectiveness of feed-throughs and 

electromagnetic gaskets double coaxial method 


TC 46 

CDV 62153-4-11:2008 

Metallic communication cable test methods Part 4 - 11: 

Electromagnetic Compatibility (EMC) - Coupling 

attenuation or screening attenuation of patch cords / 

coaxial cable assemblies / pre-connectorised cables 

absorbing clamp method 


TC 46 

CDV 62153-4-12:2008 

Metallic communication cable test methods Part 4 - 12: 


attenuation or screening attenuation of connecting 

hardware Absorbing clamp method 


TC 46 

CDV 62153-4-13:2008 

Metallic communication cable test methods Part 4-13: 


attenuation of links and channels (Laboratory 

conditions) - Absorbing clamp method 


TC 47 

FDIS 60749-20-1:2009 

Semiconductor devices - Mechanical and climatic test 

methods Part 20-1: Handling, packing, labelling and 

shipping of surface-mount devices sensitive to the 

combined effect of moisture and soldering heat 



TC 47 

CDV 62374-1:2008 

Time Dependent Dielectric Breakdown Test (TDDB) For 

Inter-metal layers 


TC 47 

CDV 62418:2009 

Semiconductor devices - Metallization stress void test 


TC 47 

CDV 62615:2008 

Electrostatic Discharge Sensitivity Testing - 

Transmission Line Pulse (TLP) - Component Level 


TC 49 

CDV 60679-6:2008 

Quartz crystal controlled oscillators of assessed quality 

Part 6: Phase jitter measurement method for quartz 

crystal oscillators and SAW oscillators - Application 

guide 


TC 51 

CDV 60401-2:2008 




TC 51 

CDV 60401-2:2008 




TC 51 

CDV 62333-3:2009 





TC 51 

CDV 62333-3:2009 





TC 55 

IEC 60264-1:1968 /FDIS A1:2009 

Packaging of winding wires Part 1: Containers for round 

winding wires 


TC 55 

IEC 60264-4-1:1997 /FDIS A1:2009 

Packaging of winding wires Part 4-1: Methods of test - 

Delivery spools made from thermoplastic materials 


TC 55 

CDV 60317-1:2009 


1: Polyvinyl acetal enamelled round copper wire, class 

105 


TC 55 

IEC 60317-3:2004 /CDV A1:2009 


3: Polyester enamelled round copper wire, class 155 


TC 55 

CDV 60317-8:2009 


8: Polyesterimide enamelled round copper wire, class 

180 


TC 55 

CDV 60317-12:2009 

Specifications for particular types of winding wire Part 

12: Polyvinyl acetal enamelled round copper wire, class 

120 


TC 55 

CDV 60317-13:2009 



polyamide-imide enamelled round copper wire, class 200 


TC 55 

IEC 60317-15:2004 /CDV A1:2009 


Part 15: Polyesterimide enamelled round aluminium wire, 

class 180 


TC 55 

CDV 60317-17:2009 

Specifications for particular types of winding wire Part 


class 105 


TC 55 

IEC 60317-18:2004 /CDV A1:2009 



class 120 


TC 55 

IEC 60317-22:2004 /CDV A1:2009 


Part 22: Polyester or polyesterimide enamelled round 

copper wire overcoated with polyamide, class 180 


TC 55 

CDV 60317-25:2009 



polyamide-imide enamelled round aluminum wire, class 

200 


TC 55 

IEC 60317-26:1990 /CDV A2:2009 


Part 26: Polyamide-imide enamelled round copper wire, 

class 200 


TC 55 

IEC 60317-29:1990 /CDV A2:2009 

Specifications for particular types of winding wires - 

Polyester or polyesterimide overcoated with 

polyamide-imide enamelled rectangular copper wire, 

class 200 


TC 55 

IEC 60317-42:1997 /CDV A1:2009 


Part 42: Polyester-amide-imide enamelled round copper 




TC 55 

IEC 60317-43:1997 /CDV A1:2009 


Part 43: Aromatic polyimide tape wrapped round copper 



TC 55 

IEC 60317-44:1997 /CDV A1:2009 


Part 44: Aromatic polyimide tape wrapped rectangular 

copper wire, class 240 


TC 55 

IEC 60851-1:1996 /CDV A2:2008 

Winding wires - Test methods Part 1: General 


TC 55 

CDV 60851-2:2008 

Winding wires - Test methods Part 2: Determination of 

dimensions 


TC 57 

FDIS 61970-301:2009 

Energy management system application program 

interface (EMS-API) Part 301: Common information 

model (CIM) base 


TC 61 

CDV 60335-1:2008 




TC 61 

CDV 60335-1:2008 




TC 61 

CDV 60335-1:2008 




TC 61 

CDV 60335-1:2008 




TC 61 

CDV 60335-2-2:2008 


2-2: Particular requirements for vacuum cleaners and 

water-suction cleaning appliances 


TC 61 

CDV 60335-2-13:2008 


2-13: Particular requirements for deep fat fryers, frying 

pans and similar appliances 


TC 61 

CDV 60335-2-27:2008 


2-27: Particular requirements for appliances for skin 

exposure to ultraviolet and infrared radiation 


TC 61 

IEC 60335-2-29:2002 /CDV A2:2008 


2-29: Particular requirements for battery chargers 


TC 61 

CDV 60335-2-30:2008 


2-30: Particular requirements for room heaters 


TC 61 

IEC 60335-2-35:2002 /CDV A2:2008 

Particular requirements for instantaneous water heaters 


TC 61 

IEC 60335-2-41:2002 /CDV A2:2008 


2-41: Particular requirements for pumps 


TC 61 

IEC 60335-2-59:2002 /CDV A2:2008 


2-59: Particular requirements for insect killers 


TC 61 

IEC 60335-2-73:2002 /CDV A2:2008 


2-73: Particular requirements for fixed immersion heaters 


TC 61 

IEC 60335-2-74:2002 /CDV A2:2008 


2-74: Particular requirements for portable immersion 

heaters 


TC 64 

CDV 60364-4-42:2009 

Low-voltage electrical installations Part 4- 42: Protection 

for safety - Protection against thermal effects 


TC 64 

IEC 60364-5-53:2001 /CDV A2:2009 

Low-voltage electrical installations Part 5-53: Selection 

and erection of electrical equipment - Protection, 

isolation, switching, control and monitoring 


TC 66 

CDV 61010-1:2009 


measurement, control, and laboratory use 



TC 66 

CDV 61010-2-030:2009 


measurement, control, and laboratory use 

Part 2-030: Particular requirements for testing and 

measuring circuits 


TC 68 

FDIS 60404-8-10:2009 

Magnetic materials Part 8-10: Specifications for 

individual materials - Magnetic materials (iron and steel) 

for use in relays 



TC 69 

CDV 62576:2008 





TC 69 

CDV 62576:2008 





TC 78 

CDV 60832-1:2008 

Live working - Insulating sticks and attachable devices 

Part 1: Insulating sticks 


TC 78 

CDV 60832-2:2008 

Live working - Isulating sticks and attachable devices 

Part 2: Attachable devices 


TC 78 

FDIS 61111:2009 

Live working - Electrical insulating matting 


TC 78 

FDIS 61112:2009 

Live working - Electrical insulating blankets 


TC 78 

FDIS 61482-1-1:2009 


hazards of an electric arc Part 1: Test methods - Method 1 

- Determination of the arc rating (atpv or ebt50) of flame 

resistant materials for clothing 


TC 78 

FDIS 61482-2:2009 


hazards of an electric arc 

Part 2: Requirements 


TC 79 

CDV 62599-1:2008 

Alarm Systems Part 1: General requirements - 

Environmental test methods 


TC 79 

CDV 62599-2:2008 

Alarm Systems Part 2: General requirements - 

Electromagnetic compatibility 


TC 80 

CDV 61097-14:2009 

Global maritime distress and safety system (GMDSS) Part 

14: AIS search and rescue transmitter (AIS-SART) - 

Operational and performance requirements, methods of 

testing and required test results 


TC 80 

CDV 62616:2009 

Maritime navigation and radiocommunication equipment 

and systems - Bridge navigational watch alarm system 

(BNWAS)- Performance requirements, methods of testing 

and required test results 


TC 82 

CDV 60891:2008 

Procedures for temperature and irradiance corrections to 

measured I-V characteristics of photovoltaic devices 


TC 82 

FDIS 62446:2009 

Grid connected photovoltaic systems - Minimum 

requirements for system documentation, commissioning 

tests and inspection 


TC 82 

CDV 62509:2009 

Performance and functioning of photovoltaic battery 

charge controllers 


TC 86 

CDV 61746-1:2008 

Calibration of optical time-domain reflectometers 

(OTDR) Part 1: OTDR for single-mode fibres 


TC 86 

CDV 62496-3-1:2008 

Optical circuit boards - Performance standard Part 3-1: 

Flexible optical circuit boards using unconnectorized 

optical glass fibres 


TC 87 

CDV 60050-802:2009 


Ultrasonics 


TC 87 

CDV 61391-2:2008 

Ultrasonics - Pulse-echo scanners Part 2: Measurement 

of maximum depth of penetration and local dynamic 

range 


TC 88 

IEC 61400-1:2005 /CDV A1:2009 

Wind turbines 

Part 1: Design requirements 


TC 88 

CDV 61400-24:2009 

Wind turbines Part 24: Lightning protection 


TC 89 

CDV 60695-1-10:2008 

Fire hazard testing Part 1-10: Guidance for assessing the 

fire hazard of electrotechnical products - General 



TC 90 

CDV 61788-8:2009 

Superconductivity Part 8: AC loss measurements - Total 

AC loss measurement of round superconducting wires 

exposed to a transverse alternating magnetic field at 

liquid helium temperature by a pickup coil method 



TC 91 

FDIS 61188-7:2009 

Printed boards and printed board assemblies - Design and 

use Part 7: Electronic component zero orientation for 

CAD library construction 


TC 91 

IEC 61190-1-3:2007 /CDV A1:2009 

Attachment materials for electronic assembly Part 1-3: 

Requirements for electronic grade solder alloys and 

fluxed and non-fluxed solid solder for electronic 

soldering applications 


TC 91 

FDIS 61249-4-14:2009 




multilayer boards) - Epoxide woven E-glass prepreg of 

defined flammability (vertical burning test) for lead-free 

assembly 


TC 91 

FDIS 61249-4-15:2009 




multilayer boards) - Multifunctional epoxide woven 




TC 91 

FDIS 61249-4-16:2009 




multilayer boards)- Multifunctional non-halogenated 

epoxide woven E-glass prepreg of defined flammability 

(vertical burning test) for lead-free assembly 


TC 91 

FDIS 61249-4-17:2009 




multilayer boards) - Non-halogenated epoxide woven 




TC 96 

CDV 61558-2-8:2009 



2-8: particular requirements and tests for bell and chime 

transformers 


TC 96 

CDV 61558-2-12:2008 



2-12: Particular requirements and tests for constant 

voltage transformers and power supply units 

incorporating constant voltages transformers 


TC 96 

CDV 61558-2-20:2008 



2-20: Particular requirements and tests for small reactors 


TC 99 

CDV 61936-1:2008 

Power Installations Exceeding 1 kV a.c Part 1: Common 

rules 


TC 100 

CDV 60461:2009 

Time and control code (TA6) 


TC 100 

CDV 60728-1-1:2008 


interactive services Part 1-1: RF cabling for two way 

home networks (TA 5) 


TC 100 

CDV 60728-7-3:2008 

Cable Networks for television signals, sound signals and 

interactice services Part 7-3: Hybrid Fibre Coax Outside 

Plant Status Monitoring - Power Supply to Transponder 

Interface Bus (PSTIB) specification (TA 5) 


TC 100 

CDV 60728-11:2008 


interactive services Part 11: Safety (TA 5) 


TC 100 

IEC 60958-3:2006 /CDV A1:2009 

Digital audio interface 

Part 3: Consumer application 


TC 100 

CDV 61937-11:2008 

Digital audio - Interface for non-linear PCM encoded 

audio bitstreams applying IEC 61937 Part 11: MPEG-4 

AAC and its extensions in LATM/LOAS (TA4) 


TC 100 

FDIS 62365:2009 

Digital audio - Digital input-output interfacing - 

Transmission of digital audio over asynchronous 

transfer mode (ATM) networks 


TC 100 

CDV 62458:2008 


Measurement of large signal parameters 


TC 100 

CDV 62459:2008 


Measurement of suspension parts 


TC 100 

CDV 62546:2008 

HD Recording Link Guidlines (TA9) 


TC 101 

CDV 61340-5-3:2009 

Electrostatics Part 5-3: Protection of electronic devices 

from electrostatic phenomena - Properties and 

requirements classifications for packaging intended for 

electrostatic discharge sensitive devices 



TC 105 

FDIS 62282-6-300:2009 

Fuel cell technologies Part 6-300: Micro fuel cell power 

systems - Fuel cartridge interchangeability 



TC 116 

IEC 60745-2-19:2005 /CDV A1:2009 


2-19: Particular requirements for jointers 


TC 106 

CDV 62209-2:2008 

Human Exposure to Radio Frequency Fields from 

Handheld and Body-Mounted Wireless Communication 

Devices - Human models, Instrumentation, and Procedures 

Part 2: Procedure to determine the specific absorption 

rate (SAR) for mobile wireless communication devices 

used in close proximity to the human body (frequency 

range of 30 MHz to 6 GHz) 


TC 106 

CDV 62479:2008 




300 GHz) 


TC 108 

IEC 60065:2001 /CDV A2:2009 

Audio, video and similar electronic apparatus - Safety 

-requirements 


TC 110 

FDIS 61747-5-3:2009 

Liquid crystal display devices Part 5-3: Environmental, 

endurance and mechanical test methods - Glass strength 

and reliability 


TC 110 

FDIS 62341-1-1:2009 

Organic light emitting diode (OLED) displays Part 1-1: 

Generic specifications 


TC 110 

FDIS 62341-6-1:2009 

Organic light emitting diode (OLED) displays Part 6-1: 

Measuring methods of optical and electro-optical 

parameters 


TC 112 

IEC 60112:2003 /CDV A1:2009 

Method for the determination of the proof and the 

comparative tracking indices of solid insulating materials 


TC 112 

FDIS 61857-21:2009 

Electrical insulation systems - Procedures for thermal 

evaluation Part 21: Specific requirements for 

general-purpose models - Wire-wound applications 


TC 116 

IEC 60745-2-14:2003 /CDV A2:2009 


2-14: Particular requirements for planers 


TC 116 

IEC 60745-2-15:2006 /FDIS A1:2009 


2-15: Particular requirements for hedge trimmers 


8. Projectos de Normas da Organização Internacional de Normalização 

(ISO)/Comissão Electrotécnica internacional (IEC) 

Os projectos de norma estão organizados por “Comité Técnico conjunto” ISO/IEC. 



LISTA VAZIA

Projectos de Normas - IPQ

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?