Documentos normativos - IPQ

Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
lista mensal março 2013
A presente -publicação tem por objetivo:
- A divulgação das Normas Portuguesas recentemente editadas e anuladas, bem como das Normas
Europeias adotadas como Normas Portuguesas, e das Normas Europeias e Internacionais publicadas
e já disponíveis.
- A divulgação pública dos projetos de Normas Portuguesas, Europeias e Internacionais, com vista à
obtenção durante o período de inquérito público dos pontos de vista e contribuições nacionais que
possam ser considerados na sequente elaboração, aprovação e homologação das Normas.
- A divulgação de propostas de novos trabalhos de normalização europeia e internacional, para que
se possa obter, durante o período de inquérito público, os pontos de vista e as contribuições
nacionais.
- A divulgação da edição e anulação de outros documentos normativos.
ÍNDICE
1. Normas Portuguesas
1.1 Normas Portuguesas publicadas …………………………………………………………………………. 3
1.2 Normas Portuguesas anuladas …………………………………………………………………………… 5
1.3 Normas Portuguesas em re-exame ……………………………………………………………………… 7
1.4 Normas Europeias adotadas ……………………………………………………………………………… 8
2. Normas Europeias Publicadas
2.1 CEN …………………………………………………………………………………………………………….. 15
2.2 CENELEC ………………………………………………………………………………………………………. 20
2.3 CEN/CENELEC ……………………………………………………………………………………………….. 22
2.4 ETSI ……………………………………………………………………………………………………………… 23
3. Normas Internacionais publicadas
IEC ……………………………………………………………………………………………………………………
ISO …………………………………………………………………………………………………………………...
4. Projetos de normas portuguesas
4.1 Projetos em inquérito público …………………………………………………………………………….. 27
4.2 Projetos anulados ………………………………………………………………………………………….… 28
5. Projetos de normas e propostas de estudo de novas normas do Comité Europeu
de Normalização(CEN e do Comité Europeu para a Normalização do Ferro e do Aço (ECISS)
5.1 Projetos em inquérito público …………………………………………………………………………..… 29
5.2 Questionários preliminares ……………………………………………………………………………….… 53
5.3 Comités Técnicos do CEN …………………………………………………………………………………. 54
24
26
Mod-DNOR-01-08_01
Rua António Gião, 2 2829-513 CAPARICA
Tel +351 212 948 100 Fax +351 212 948 223 www.ipq.pt

Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
ÍNDICE (cont.)
6. Projetos de normas e propostas de estudo de novas normas do Comité Europeu
de Normalização Electrotécnica (CENELEC)
6.1 Projetos em inquérito público …………………………………………………………………………… 58
6.2 Propostas de anulação de Normas ………………………………………………………….………... 69
6.3 Proposta de estudo de novas normas - "Vilamoura Procedures" …………….……………….…. 70
6.4 Questionários preliminares …………………………………………………………….……………….… 71
7. Projetos de Normas e Propostas de Estudo de Novas Normas do Comité Europeu
de Normalização (CEN) / Comité Europeu de Normalização Electrotécnica (CENELEC)
7.1 Projetos em inquérito público …………………………………………………………………………… 72
8. Projetos de normas do Instituto Europeu de Normalização para as Telecomunicações (ETSI)
8.1 Projetos em inquérito público …………………………………………………………………………… 73
8.2 Propostas de anulação de Normas ……………………………………………………………………. 75
9. Projetos de normas e propostas de estudo de novas Normas de Organização Internacional
de Normalização (ISO)
9.1 Projetos em inquérito público …………………………………………………………………………… 76
9.2 Comités Técnicos da ISO ……………………………………………………………………….………... 91
10. Projetos de normas e propostas de estudo de novas normas da Comissão Electrotécnica
Internacional (IEC)
10.1 Projetos em inquérito público ………………………………………………………………………….. 94
11. Projetos de normas da Organização Internacional de Normalização (ISO)/Comissão
Eletrotécnica Internacional (IEC)
11.1 Projetos em inquérito público …………………………………………………………………….……. 102
12. Edição e anulação de outros documentos Normativos
…………………………………………………………………………………………….… 103
Mod-DNOR-01-08_01
Rua António Gião, 2 2829-513 CAPARICA
Tel +351 212 948 100 Fax +351 212 948 223 www.ipq.pt

DOCUMENTOS
normativos
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
1. Normas Portuguesas
1.1 Normas Portuguesas publicadas
Para cada referência, menciona-se a designação codificada (prefixos NP, NP EN, NP EN ISO, NP
ISO, NP IEC, NP ISO/IEC, NP EN ISO/IEC, NP HD ou NP ENV, número, parte e data), o preço, o título e a
correspondência a documentos europeus e/ou internacionais, quando existam, o número do Termo
de Homologação e a respectiva data. As Normas Portuguesas referenciadas entram em vigor no dia
seguinte ao da edição desta Lista Mensal.
C30 / CT 3
NP EN 13523-1:2013 ( 2ª Edição )
Preço: 10,50 EUR
Bandas metálicas pré-revestidas Métodos de ensaio Parte 1:
Espessura de revestimento
EN 13523-1:2009 IDT
Termo de Homologação nº 2013/0038, 2013-02-12
C30 / CT 3
NP EN ISO 21227-2:2013 ( 1ª Edição ) Preço: 14,00 EUR
Tintas e vernizes Avaliação dos defeitos em superfícies revestidas
utilizando imagiologia ótica Parte 2: Procedimento de avaliação
para o ensaio multi-impacto por projeção de gravilha
(ISO 21227-2:2006)
EN ISO 21227-2:2006 IDT
Termo de Homologação nº 2013/0026, 2013-01-23
C30 / CT 3
NP EN ISO 21227-3:2013 ( 1ª Edição ) Preço: 14,00 EUR
Tintas e vernizes Avaliação dos defeitos em superfícies revestidas
utilizando imagiologia ótica Parte 3: Avaliação da delaminação e
corrosão à volta do corte
(ISO 21227-3:2007)
EN ISO 21227-3:2007 IDT
Termo de Homologação nº 2013/0027, 2013-01-23
C30 / CT 3
NP EN ISO 21227-4:2013 ( 1ª Edição ) Preço: 14,00 EUR
Tintas e vernizes Avaliação de defeitos em superfícies revestidas
utilizando imagiologia ótica Parte 4: Avaliação da corrosão
filiforme
(ISO 21227-4:2008)
EN ISO 21227-4:2008 IDT
Termo de Homologação nº 2013/0028, 2013-01-23
C40 / CT 4
NP EN ISO 139:2005 /A 1:2013 ( 1ª Edição ) Preço: 7,00 EUR
Têxteis Atmosferas padrão para condicionamento e ensaio - Emenda
1
(ISO 139:2005/A1:2011)
EN ISO 139:2005 /A 1:2011 IDT
Termo de Homologação nº 2013/0022, 2013-01-16
C40 / CT 4
NP EN ISO 6330:2012 /Errata 1:2013 ( 1ª Edição ) Preço: 0,00
EUR
Têxteis Procedimentos de lavagem e secagem doméstica para ensaio
de têxteis
(ISO 6330:2012)
C40 / CT 4
NP EN ISO 13433:2008 /Errata 1:2013 ( 1ª Edição ) Preço: 0,00
EUR
Geossintéticos Ensaio de perfuração dinâmica (ensaio com queda de
cone)
(ISO 13433:2006)
C40 / CT 4
NP ISO 6938:2013 ( 2ª Edição )
Preço: 17,50 EUR
Têxteis Fibras naturais Nomes genéricos e definições
ISO 6938:2012 IDT
Termo de Homologação nº 2013/0046, 2013-02-20
C40 / CT 4
NP ISO 9867:2013 ( 1ª Edição )
Preço: 24,50 EUR
Têxteis Avaliação do desenrugamento dos tecidos Método por
avaliação do aspeto
ISO 9867:2009 IDT
Termo de Homologação nº 2013/0049, 2013-02-20
C90 / CT 9
NP EN 81714-2:2013 ( 1ª Edição )
Preço: 64,50 EUR
Concepção de símbolos gráficos para utilização em documentação
técnica de produtos Parte 2: Especificação para símbolos gráficos
numa forma adaptada ao computador, incluindo símbolos gráficos
para uma biblioteca de referência, e requisitos para o seu
intercâmbio
(IEC 81714-2:2006)
EN 81714-2:2007 IDT
Termo de Homologação nº 2013/0041, 2013-02-12
C120 / CT 12
NP EN 10088-5:2013 ( 1ª Edição )
Preço: 47,50 EUR
Aços inoxidáveis Parte 5: Condições técnicas de fornecimento para
barras, varões, fio máquina, perfis e produtos transformados a frio
em aços resistentes à corrosão para uso na construção
EN 10088-5:2009 IDT
Termo de Homologação nº 2013/0031, 2013-01-23
C350 / CT 35
NP 4498-1:2013 ( 1ª Edição )
Preço: 7,00 EUR
Carnes e produtos cárneos Determinação do teor de sulfitos Parte
1: Método enzimático (método de referência)
Termo de Homologação nº 2013/0010, 2013-01-08
C350 / CT 35
NP 4498-2:2013 ( 1ª Edição )
Preço: 10,50 EUR
Carnes e produtos cárneos Determinação do teor de sulfitos Parte
2: Método de Monier-Williams otimizado (método corrente)
Termo de Homologação nº 2013/0011, 2013-01-08
C360 / CT 36
NP EN 30-1-1:2008+A2:2013 ( 2ª Edição ) Preço: 85,50 EUR
Aparelhos domésticos para preparação de alimentos que utilizam os
combustíveis gasosos Parte 1-1: Segurança - Generalidades
EN 30-1-1:2008+A2:2010 IDT
Termo de Homologação nº 2013/0044, 2013-02-19
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 3 15 março 2013

DOCUMENTOS
normativos
C460 / CT 46
NP EN 671-3:2013 ( 2ª Edição )
Preço: 10,50 EUR
Instalações fixas de combate a incêndio Sistemas armados com
mangueiras Parte 3: Manutenção das bocas de incêndio armadas com
mangueiras semirrígidas e das bocas de incêndio armadas com
mangueiras flexíveis
EN 671-3:2009 IDT
Termo de Homologação nº 2013/0020, 2013-01-14
C1210 / CT 121
NP EN 12737-2004+A1:2013 ( 1ª Edição ) Preço: 31,50 EUR
Produtos pré-fabricados de betão Elementos de laje drenantes para
pavimentos em estábulos
EN 12737-:2004+A1:2007 IDT
Termo de Homologação nº 2013/0037, 2013-02-12
C1210 / CT 121
NP EN 15037-3:2009+A1:2013 ( 1ª Edição ) Preço: 37,50 EUR
Produtos pré-fabricados em betão Sistemas de pisos com vigas e
blocos Parte 3: Abobadilhas cerâmicas
EN 15037-3:2009+A1:2011 IDT
Termo de Homologação nº 2013/0045, 2013-02-20
C1390 / CT 139
NP EN 14516-:2006+A1:2013 ( 1ª Edição ) Preço: 24,50 EUR
Banheiras para uso doméstico
EN 14516-:2006+A1:2010 IDT
Termo de Homologação nº 2013/0050, 2013-02-22
C1390 / CT 139
NP EN 14527-:2006+A1:2013 ( 2ª Edição ) Preço: 24,50 EUR
Bases de chuveiro para uso doméstico
EN 14527-:2006+A1:2010 IDT
Termo de Homologação nº 2013/0051, 2013-02-25
C1430 / CT 143
NP EN 13715-:2006+A1:2013 ( 1ª Edição ) Preço: 28,00 EUR
Aplicações ferroviárias Rodados e bogies Rodas - Perfil da mesa
rolamento
EN 13715-:2006+A1:2010 IDT
Termo de Homologação nº 2013/0039, 2013-02-12
C1450 / CT 145
NP 4406:2013 ( 4ª Edição )
Preço: 40,00 EUR
Sistemas de gestão florestal sustentável Aplicação dos critérios
pan-europeus para a gestão florestal sustentável
Termo de Homologação nº 2013/0040, 2013-02-12
C1800 / CT 180
NP ISO 31000:2013 ( 2ª Edição )
Preço: 28,00 EUR
Gestão do risco Princípios e linhas de orientação
ISO 31000:2009 IDT
Termo de Homologação nº 2013/0047, 2013-02-20
E200 / CT 2
NP EN 60034-9:2013 ( 1ª Edição )
Preço: 17,50 EUR
Máquinas elétricas rotativas Parte 9: Limites de ruído
(IEC 60034-9:2003, modificada + A1:2007)
EN 60034-9:2005 IDT;EN 60034-9:2005 /A 1:2007 IDT
Termo de Homologação nº 2013/0003, 2013-01-08
E3200 / CT 32
NP EN 60269-1:2012 ( 1ª Edição )
Preço: 66,00 EUR
Fusíveis de baixa tensão Parte 1: Requisitos gerais
(IEC 60269-1:2006 + A1:2009)
EN 60269-1:2007 IDT;EN 60269-1:2007 /A 1:2009 IDT
Termo de Homologação nº 2012/0189, 2012-07-10
E6100 / CT 61
NP EN 61558-2-16:2012 ( 1ª Edição ) Preço: 35,00 EUR
Segurança de transformadores, bobinas de indutância, blocos de
alimentação e produtos análogos para tensões de alimentação até
1100 V Parte 2-16: Requisitos particulares e ensaios para blocos
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
de alimentação comutados e transformadores para blocos de
alimentação comutados
(IEC 61558-2-16:2009)
EN 61558-2-16:2009 IDT
Termo de Homologação nº 2012/0345, 2012-12-10
M091 / CT 999091
NP EN 1857:2013 ( 2ª Edição )
Preço: 45,00 EUR
Chaminés Componentes Condutas interiores em betão
EN 1857:2010 IDT
Termo de Homologação nº 2013/0053, 2013-02-26
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 4 15 março 2013

Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
1.2 Normas Portuguesas anuladas
Para cada referência, menciona-se a designação codificada (prefixos NP, NP EN, NP HD ou NP
ENV, número, parte e data), o título, a correspondência a documentos europeus e/ou internacionais
quando existam, o número do Termo de (Anulação, Homologação ou Adoção) e a respetiva data,
bem como a referência do documento que a substitui. As anulações das Normas Portuguesas
referenciadas tornam-se efetivas no dia seguinte ao da edição desta Lista Mensal.
C30 / CT 3
NP EN 13523-1:2002 ( 1ª Edição )
Bandas metálicas pré-revestidas Métodos de ensaio Parte 1:
Espessura de revestimento
EN 13523-1:2001 IDT
Anulada em: 2013-02-28
Substituida por: EN 13523-1:2009;NP EN 13523-1:2013
C30 / CT 3
NP EN ISO 3678:1997 ( 1ª Edição )
Tintas e vernizes Ensaio de secagem "aparente completa"
(ISO 3678:1976)
EN ISO 3678:1995 IDT
Anulada em: 2013-02-25
Substituida por: EN ISO 9117-6:2012
C40 / CT 4
NP EN 24920:1993 ( 1ª Edição )
Têxteis Determinação da resistência dos tecidos à molhagem
superficial. (Ensaio de chuveiro)
EN 24920:1992 IDT
Anulada em: 2013-02-25
Substituida por: EN ISO 4920:2012
C40 / CT 4
NP ISO 6938:2002 ( 1ª Edição )
Têxteis Fibras naturais Nomes genéricos e definições
ISO 6938:1984 IDT
Anulada em: 2013-02-28
Substituida por: NP ISO 6938:2013
C140 / CT 14
NP EN 636:2010 ( 1ª Edição )
Contraplacado Especificações
EN 636:2003 IDT
Anulada em: 2013-02-28
Substituida por: EN 636:2012
C420 / CT 42
NP 1024:1974 ( 1ª Edição )
Poluição do meio ambiente Chumbo Colheita das amostras na
atmosfera dos locais de trabalho
Anulada em: 2013-02-25
C420 / CT 42
NP 1025:1974 ( 1ª Edição )
Poluição do meio ambiente Chumbo Colheita de amostras nas
emissões das chaminés
Anulada em: 2013-02-2
C420 / CT 42
NP 1026:1974 ( 1ª Edição )
Poluição do meio ambiente Chumbo Determinação qualitativa
expedita pelo método de reacção de gota (comparação visual)
Anulada em: 2013-02-25
C420 / CT 42
NP 1027:1974 ( 1ª Edição )
Poluição do meio ambiente Chumbo Determinação quantitativa pelo
método colorimétrico de comparação visual
Anulada em: 2013-02-25
C420 / CT 42
NP 2199:1986 ( 1ª Edição )
Higiene e segurança no trabalho Técnicas de colheitas de ar para
análise de gases e vapores nos ambientes dos locais de trabalho
Anulada em: 2013-02-25
C800 / CT 80
NP ISO 31000:2012 ( 1ª Edição )
Gestão do risco Princípios e linhas de orientação
ISO 31000:2009 IDT
Anulada em: 2013-02-20
Substituida por: NP ISO 31000:2013
C1000 / CT 100
NP EN 12252-:2005+A1:2010 ( 1ª Edição )
Equipamentos e acessórios para GPL Acessórios para
veículos-cisterna de GPL
EN 12252-:2005+A1:2008 IDT
Anulada em: 2013-02-25
Substituida por: EN 12252:2012
C1040 / CT 104
NP EN 934-3:2010 ( 2ª Edição )
Adjuvantes para betão, argamassa e caldas de injecção Parte 3:
Adjuvantes para argamassa de alvenaria Definições, requisitos,
conformidade, marcação e etiquetagem
EN 934-3:2009 IDT
Anulada em: 2013-02-20
Substituida por: NP EN 934-3:2009+A1:2012
C1040 / CT 104
NP EN 12504-2:2003 ( 1ª Edição )
Ensaios do betão nas estruturas Parte 2: Ensaio não destrutivo -
Determinação do índice esclerométrico
EN 12504-2:2001 IDT
Anulada em: 2013-02-20
Substituida por: NP EN 12504-2:2012
C1041 / CT 104
NP EN 12390-1:2010 ( 2ª Edição )
Ensaios do betão endurecido Parte 1: Forma, dimensões e outros
requisitos para o ensaio de provetes e para os moldes
EN 12390-1:2000 IDT;EN 12390-1:2000 /AC :2004 IDT
Anulada em: 2013-02-20
Substituida por: NP EN 12390-1:2012
C1050 / CT 105
NP EN 197-1:2001 ( 1ª Edição )
Cimento Parte 1: Composição, especificações e critérios de
conformidade para cimentos correntes
EN 197-1:2000 IDT
Anulada em: 2013-02-20
Substituida por: NP EN 197-1:2012
C1050 / CT 105
NP EN 197-1:2001 /A 1:2005 ( 1ª Edição )
Cimento Parte 1: Composição, especificações e critérios de
conformidade para cimentos correntes
EN 197-1:2000 /A 1:2004 IDT
Anulada em: 2013-02-20
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 5 15 março 2013

DOCUMENTOS
normativos
Substituida por: NP EN 197-1:2012
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
Substituida por: EN 60730-2-15:2010
C1050 / CT 105
NP EN 197-1:2001 /A 3:2008 ( 1ª Edição )
Cimento Parte 1: Composição, especificações e critérios de
conformidade para cimentos correntes
EN 197-1:2000 /A 3:2007 IDT
Anulada em: 2013-02-20
Substituida por: NP EN 197-1:2012
C1210 / CT 121
NP EN 12467:2009 ( 1ª Edição )
Chapas lisas de fibrocimento Características do produto e métodos
de ensaio
EN 12467:2004 IDT;EN 12467:2004 /A 1:2005 IDT;EN 12467:2004
Anulada em: 2013-02-28
Substituida por: EN 12467:2012
C1450 / CT 145
NP 4406:2009 ( 3ª Edição )
Sistemas de gestão florestal sustentável Aplicação dos critérios
pan-europeus para a gestão florestal sustentável
Anulada em: 2013-02-12
Substituida por: NP 4406:2013
E5900 / CTE 59
NP EN 60704-1:1996 ( 1ª Edição )
Código de ensaio para a determinação do ruído aéreo emitido pelos
aparelhos electrodomésticos e análogos Parte 1: Regras gerais
(IEC 60704-1:1982)
EN 60704-1:1994 IDT
Anulada em: 2013-02-25
Substituida por: EN 60704-1:2010
E7200 / CTE 72
NP EN 60730-2-18:2007 ( 1ª Edição )
Dispositivos de comando eléctrico automáticos para uso doméstico e
análogo Parte 2-18: Regras particulares para os dispositivos de
comando eléctrico automáticos detectores do fluxo de água e de ar,
incluindo as prescrições mecânicas
(IEC 60730-2-18:1997, modificada)
EN 60730-2-18:1999 IDT;EN 60730-2-18:1999 /A 11:2005 IDT
Anulada em: 2013-02-25
Substituida por: EN 60730-2-15:2010
M091 / CT 999091
NP EN 544:2010 ( 1ª Edição )
Telhas betuminosas com armaduras minerais e/ou sintéticas
Especificações de produto e métodos de ensaio
EN 544:2005 IDT
Anulada em: 2013-02-28
Substituida por: EN 544:2011
M091 / CT 999091
NP EN 12446:2010 ( 1ª Edição )
Chaminés Componentes Elementos para paredes exteriores em betão
EN 12446:2003 IDT
Anulada em: 2013-02-28
Substituida por: EN 12446:2011
E5900 / CTE 59
NP EN 60704-1:2007 ( 2ª Edição )
Código de ensaio para a determinação do ruído aéreo emitido pelos
aparelhos electrodomésticos e análogos Parte 1: Regras gerais
(IEC 60704-1:1997)
EN 60704-1:1997 IDT
Anulada em: 2013-02-25
Substituida por: EN 60704-1:2010
E6100 / CTE 61
NP EN 60335-2-89:2007 ( 1ª Edição )
Aparelhos electrodomésticos e análogos - Segurança Parte 2-89:
Regras particulares para os aparelhos de refrigeração de uso
comercial com uma unidade de condensação do refrigerante ou um
compressor incorporado ou à distância
(IEC 60335-2-89:2002 + A1:2005)
EN 60335-2-89:2002 IDT;EN 60335-2-89:2002 /A 1:2005 IDT;EN 6
Anulada em: 2013-02-25
Substituida por: EN 60335-2-89:2010
E7200 / CTE 72
NP EN 60730-2-15:2007 ( 1ª Edição )
Dispositivos de comando eléctrico automáticos para uso doméstico e
análogo Parte 2-15: Regras particulares para os dispositivos de
comando eléctrico automáticos para detecção do nível de água do
tipo flutuante ou de eléctrodo utilizados em aplicações de caldeiras
(IEC 60730-2-15:1994 + A1:1997)
EN 60730-2-15:1995 IDT;EN 60730-2-15:1995 /A 1:1998 IDT;EN
Anulada em: 2013-02-25
Substituida por: EN 60730-2-15:2010
E7200 / CTE 72
NP EN 60730-2-16:2007 ( 1ª Edição )
Dispositivos de comando eléctrico automáticos para uso doméstico e
análogo Parte 2-16: Regras particulares para os dispositivos de
comando eléctrico automáticos detectores do nível de água do tipo
flutuante para aplicações domésticas e usos análogos
(IEC 60730-2-16:1995, modificada + A1:1997 + A2:2001)
EN 60730-2-16:1997 IDT;EN 60730-2-16:1997 /A 1:1998 IDT;EN
Anulada em: 2013-02-25
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 6 15 março 2013

Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
1.3 Normas Portuguesas em re-exame
Com o objetivo de se assegurar a atualidade das normas integrantes do acervo normativo nacional,
as Normas Portuguesas devem ser objeto de um re-exame periódico.
Mensalmente, o IPQ colocará em inquérito público, por um período de 30 dias úteis, através da
Lista Mensal Normas e do site, uma lista de normas portuguesas pertencentes a um determinado
escalão etário.
Para cada referência, menciona-se a designação codificada (prefixo NP, número, parte e data), o
título e a respetiva data, bem como o seu autor.
Pretende-se com este inquérito público, que os interessados que pretendam dar os seus contributos o
possam fazer, para cada uma das normas portuguesas constantes na presente listagem, respondendo
aos seguintes pontos, tendo em conta a vossa experiência:
1 - Avaliação em termos de atualidade, a responder em alternativa:
A norma portuguesa está atual ?
A norma portuguesa deve ser revista ?
A norma portuguesa está obsoleta ?
2 - Eventual legislação relacionada:
A norma portuguesa está referida em legislação ? Se sim, qual ?
3 - Comentário
NOTA: Os interessados são convidados a pronunciarem-se somente sobre as normas que entendam
conveniente, devendo enviar a informação ao Serviço de Normalização (NOR@mail.ipq.pt)
.
LISTA VAZIA
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 7 15 março 2013

Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
1.4 Normas Europeias adotadas
Para cada Norma, indica-se a designação codificada (prefixo, número, ano), o título, o número
do Termo de Adoção e a respetiva data.
Os textos das Normas Europeias Adotadas como Normas Portuguesas estão disponíveis para
consulta ou aquisição neste Instituto nas línguas oficiais do CEN/CENELEC (inglês, francês e
alemão) e do ETSI (inglês). As adoções das Normas Europeias referenciadas entram em vigor no
dia seguinte ao da edição desta Lista Mensal.
EN 896:2012 ( 3ª Edição )
Chemicals used for treatment of water intended for human
consumption Sodium hydroxide
Termo de Adopção nº2013/ 1645, 2013-02-28
EN 897:2012 ( 3ª Edição )
Chemicals used for treatment of water intended for human
consumption Sodium carbonate
Termo de Adopção nº2013/ 1646, 2013-02-28
EN 898:2012 ( 3ª Edição )
Chemicals used for treatment of water intended for human
consumption Sodium hydrogen carbonate
Termo de Adopção nº2013/ 1647, 2013-02-28
EN 1264-2:2008+A1:2012 ( 1ª Edição )
Water based surface embedded heating and cooling systems Part 2:
Floor heating: Prove methods for the determination of the thermal
output using calculation and test methods
Termo de Adopção nº2013/ 1648, 2013-02-28
EN 1341:2012 ( 3ª Edição )
Slabs of natural stone for external paving Requirements and test
methods
Termo de Adopção nº2013/ 1649, 2013-02-28
EN 1342:2012 ( 3ª Edição )
Setts of natural stone for external paving Requirements and test
methods
Termo de Adopção nº2013/ 1650, 2013-02-28
EN 1343:2012 ( 3ª Edição )
Kerbs of natural stone for external paving Requirements and test
methods
Termo de Adopção nº2013/ 1651, 2013-02-28
EN 1421:2012 ( 3ª Edição )
Chemicals used for treatment of water intended for human
consumption Ammonium chloride
Termo de Adopção nº2013/ 1652, 2013-02-28
EN 1555-3:2010+A1:2012 ( 1ª Edição )
Plastics piping systems for the supply of gaseous fuels Polyethylene
(PE) Part 3: Fittings
Termo de Adopção nº2013/ 1653, 2013-02-28
EN 1744-1:2009+A1:2012 ( 1ª Edição )
Tests for chemical properties of aggregates Part 1: Chemical
analysis
Termo de Adopção nº2013/ 1654, 2013-02-28
EN 1793-1:2012 ( 2ª Edição )
Road traffic noise reducing devices Test method for determining the
acoustic performance Part 1: Intrinsic characteristics of sound
absorption
Termo de Adopção nº2013/ 1655, 2013-02-28
sound insulation under diffuse sound field conditions
Termo de Adopção nº2013/ 1656, 2013-02-28
EN 1793-6:2012 ( 1ª Edição )
Road traffic noise reducing devices Test method for determining the
acoustic performance Part 6: Intrinsic characteristics - In situ
values of airborne sound insulation under direct sound field
conditions
Termo de Adopção nº2013/ 1657, 2013-02-28
EN 1870-8:2012 ( 2ª Edição )
Safety of woodworking machines Circular sawing machines Part 8:
Single blade edging circular rip sawing machines with power
driven saw unit and manual loading and/or unloading
Termo de Adopção nº2013/ 1658, 2013-02-28
EN 1996-1-1:2005+A1:2012 ( 1ª Edição )
Eurocode 6 Design of masonry structures Part 1-1: General rules for
reinforced and unreinforced masonry structures
Termo de Adopção nº2013/ 1659, 2013-02-28
EN 10223-1:2012 ( 2ª Edição )
Steel wire and wire products for fencing and netting Part 1: Zinc and
zinc-alloy coated steel barbed wire
Termo de Adopção nº2013/ 1660, 2013-02-28
EN 10223-2:2012 ( 2ª Edição )
Steel wire and wire products for fencing and netting Part 2:
Hexagonal steel wire netting for agricultural, insulation and fencing
purposes
Termo de Adopção nº2013/ 1661, 2013-02-28
EN 10223-4:2012 ( 2ª Edição )
Steel wire and wire products for fencing and netting Part 4: Steel
wire welded mesh fencing
Termo de Adopção nº2013/ 1662, 2013-02-28
EN 10223-5:2012 ( 2ª Edição )
Steel wire and wire products for fencing and netting Part 5: Steel
wire woven hinged joint and knotted mesh fencing
Termo de Adopção nº2013/ 1663, 2013-02-28
EN 10223-6:2012 ( 2ª Edição )
Steel wire and wire products for fencing and netting Part 6: Steel
wire chain link fencing
Termo de Adopção nº2013/ 1664, 2013-02-28
EN 10223-7:2012 ( 2ª Edição )
Steel wire and wire products for fencing and netting Part 7: Steel
wire welded panels for fencing
Termo de Adopção nº2013/ 1665, 2013-02-28
EN 12120:2012 ( 3ª Edição )
Chemicals used for treatment of water intended for human
consumption Sodium hydrogen sulfite
Termo de Adopção nº2013/ 1666, 2013-02-28
EN 1793-2:2012 ( 2ª Edição )
EN 12121:2012 ( 3ª Edição )
Road traffic noise reducing devices Test method for determining the Chemicals used for treatment of water intended for human
acoustic performance Part 2: Intrinsic characteristics of airborne
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 8 15 março 2013

DOCUMENTOS
normativos
consumption Sodium disulfite
Termo de Adopção nº2013/ 1667, 2013-02-28
EN 12123:2012 ( 3ª Edição )
Chemicals used for treatment of water intended for human
consumption Ammonium sulfate
Termo de Adopção nº2013/ 1668, 2013-02-28
EN 12124:2012 ( 3ª Edição )
Chemicals used for treatment of water intended for human
consumption Sodium sulfite
Termo de Adopção nº2013/ 1669, 2013-02-28
EN 12125:2012 ( 3ª Edição )
Chemicals used for treatment of water intended for human
consumption Sodium thiosulfate
Termo de Adopção nº2013/ 1670, 2013-02-28
EN 12126:2012 ( 3ª Edição )
Chemicals used for treatment of water intended for human
consumption Liquefied ammonia
Termo de Adopção nº2013/ 1671, 2013-02-28
EN 12159:2012 ( 2ª Edição )
Builders hoists for persons and materials with vertically guided
cages
Termo de Adopção nº2013/ 1672, 2013-02-28
EN 12201-3:2011+A1:2012 ( 1ª Edição )
Plastics piping systems for water supply, and for drainage and
sewerage under pressure Polyethylene (PE) Part 3: Fittings
Termo de Adopção nº2013/ 1673, 2013-02-28
EN 12450:2012 ( 2ª Edição )
Copper and copper alloys Seamless, round copper capillary tubes
Termo de Adopção nº2013/ 1674, 2013-02-28
EN 12697-42:2012 ( 2ª Edição )
Bituminous mixtures Test methods for hot mix asphalt Part 42:
Amount of foreign matter in reclaimed asphalt
Termo de Adopção nº2013/ 1675, 2013-02-28
EN 12828:2012 ( 2ª Edição )
Heating systems in buildings Design for water-based heating
systems
Termo de Adopção nº2013/ 1676, 2013-02-28
EN 12909:2012 ( 3ª Edição )
Products used for treatment of water intended for human
consumption Anthracite
Termo de Adopção nº2013/ 1677, 2013-02-28
EN 12910:2012 ( 3ª Edição )
Products used for treatment of water intended for human
consumption Garnet
Termo de Adopção nº2013/ 1678, 2013-02-28
EN 12912:2012 ( 3ª Edição )
Products used for treatment of water intended for human
consumption Barite
Termo de Adopção nº2013/ 1679, 2013-02-28
EN 12913:2012 ( 3ª Edição )
Products used for treatment of water intended for human
consumption Powdered diatomaceous earth
Termo de Adopção nº2013/ 1680, 2013-02-28
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
EN 13162:2012 ( 3ª Edição )
Thermal insulation products for buildings Factory made mineral
wool (MW) products Specification
Termo de Adopção nº2013/ 1682, 2013-02-28
EN 13163:2012 ( 3ª Edição )
Thermal insulation products for buildings Factory made expanded
polystyrene (EPS) products Specification
Termo de Adopção nº2013/ 1683, 2013-02-28
EN 13164:2012 ( 3ª Edição )
Thermal insulation products for buildings Factory made extruded
polystyrene foam (XPS) products Specification
Termo de Adopção nº2013/ 1684, 2013-02-28
EN 13165:2012 ( 3ª Edição )
Thermal insulation products for buildings Factory made rigid
polyurethane foam (PU) products Specification
Termo de Adopção nº2013/ 1685, 2013-02-28
EN 13166:2012 ( 3ª Edição )
Thermal insulation products for buildings Factory made phenolic
foam (PF) products Specification
Termo de Adopção nº2013/ 1686, 2013-02-28
EN 13167:2012 ( 3ª Edição )
Thermal insulation products for buildings Factory made cellular
glass (CG) products Specification
Termo de Adopção nº2013/ 1687, 2013-02-28
EN 13168:2012 ( 3ª Edição )
Thermal insulation products for buildings Factory made wood wool
(WW) products Specification
Termo de Adopção nº2013/ 1688, 2013-02-28
EN 13169:2012 ( 3ª Edição )
Thermal insulation products for buildings Factory made expanded
perlite board (EPB) products Specification
Termo de Adopção nº2013/ 1689, 2013-02-28
EN 13170:2012 ( 3ª Edição )
Thermal insulation products for buildings Factory made products of
expanded cork (ICB) Specification
Termo de Adopção nº2013/ 1690, 2013-02-28
EN 13171:2012 ( 3ª Edição )
Thermal insulation products for buildings Factory made wood fibre
(WF) products Specification
Termo de Adopção nº2013/ 1691, 2013-02-28
EN 14081-2:2010+A1:2012 ( 1ª Edição )
Timber structures Strength graded structural timber with rectangular
cross section Part 2: Machine grading; additional requirements for
initial type testing
Termo de Adopção nº2013/ 1692, 2013-02-28
EN 14204:2012 ( 2ª Edição )
Chemical disinfectants and antiseptics Quantitative suspension test
for the evaluation of mycobactericidal activity of chemical
disinfectants and antiseptics used in the veterinary area Test
method and requirements (phase 2, step 1)
Termo de Adopção nº2013/ 1693, 2013-02-28
EN 14349:2012 ( 3ª Edição )
Chemical disinfectants and antiseptics Quantitative surface test for
the evaluation of bactericidal activity of chemical disinfectants
and antiseptics used in the veterinary area on nonporous surfaces
without mechanical action Test method and requirements (phase 2,
step 2)
Termo de Adopção nº2013/ 1694, 2013-02-28
EN 13067:2012 ( 2ª Edição )
Plastics welding personnel Qualification testing of welders
Thermoplastics welded assemblies
Termo de Adopção nº2013/ 1681, 2013-02-28
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 9 15 março 2013

DOCUMENTOS
normativos
EN 15028:2012 ( 2ª Edição )
Chemicals used for treatment of water intended for human
consumption Sodium chlorate
Termo de Adopção nº2013/ 1695, 2013-02-28
EN 15029:2012 ( 2ª Edição )
Products used for treatment of water intended for human
consumption
Iron (III) hydroxide oxide
Termo de Adopção nº2013/ 1696, 2013-02-28
EN 15030:2012 ( 2ª Edição )
Chemicals used for treatment of water intended for human
consumption Silver salts for intermittent use
Termo de Adopção nº2013/ 1697, 2013-02-28
EN 15482:2012 ( 2ª Edição )
Chemicals used for treatment of water intended for human
consumption Sodium permanganate
Termo de Adopção nº2013/ 1698, 2013-02-28
EN 15616:2012 ( 1ª Edição )
Copper and copper alloys Determination of cadmium content Flame
atomic absorption spectrometric method (FAAS)
Termo de Adopção nº2013/ 1699, 2013-02-28
EN 16069:2012 ( 1ª Edição )
Thermal insulation products for buildings Factory made products of
polyethylene foam (PEF) Specification
Termo de Adopção nº2013/ 1700, 2013-02-28
EN 16117-2:2012 ( 1ª Edição )
Copper and copper alloys Determination of copper content Part 2:
Electrolytic determination of copper in materials with copper
content higher than 99,80 %
Termo de Adopção nº2013/ 1701, 2013-02-28
EN 16120:2012 ( 1ª Edição )
Child use and care articles Chair mounted seat
Termo de Adopção nº2013/ 1702, 2013-02-28
EN 16141:2012 ( 1ª Edição )
Conservation of cultural heritage Guidelines for management of
environmental conditions Open storage facilities: definitions and
characteristics of collection centres dedicated to the preservation
and management of cultural heritage
Termo de Adopção nº2013/ 1703, 2013-02-28
EN 16195:2012 ( 1ª Edição )
Fertilizers Determination of chlorides in the absence of organic
material
Termo de Adopção nº2013/ 1704, 2013-02-28
EN 16196:2012 ( 1ª Edição )
Fertilizers Manganimetric determination of extracted calcium
following precipitation in the form of oxalate
Termo de Adopção nº2013/ 1705, 2013-02-28
EN 16197:2012 ( 1ª Edição )
Fertilizers Determination of magnesium by atomic absorption
spectrometry
Termo de Adopção nº2013/ 1706, 2013-02-28
EN 16198:2012 ( 1ª Edição )
Fertilizers Determination of magnesium by complexometry
Termo de Adopção nº2013/ 1707, 2013-02-28
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
spectrometry
Termo de Adopção nº2013/ 1708, 2013-02-28
EN 16223:2012 ( 1ª Edição )
Leather Requirements for the designation and description of leather
in upholstery and automotive interior applications
Termo de Adopção nº2013/ 1709, 2013-02-28
EN 16242:2012 ( 1ª Edição )
Conservation of cultural heritage Procedures and instruments for
measuring humidity in the air and moisture exchanges between air
and cultural property
Termo de Adopção nº2013/ 1710, 2013-02-28
EN 16246:2012 ( 1ª Edição )
Agricultural machinery Backhoes Safety
Termo de Adopção nº2013/ 1711, 2013-02-28
EN 16258:2012 ( 1ª Edição )
Methodology for calculation and declaration of energy consumption
and GHG emissions of transport services (freight and passengers)
Termo de Adopção nº2013/ 1712, 2013-02-28
EN 16294:2012 ( 1ª Edição )
Petroleum products and fat and oil derivatives Determination of
phosphorus content in fatty acid methyl esters (FAME) Optical
emission spectral analysis with inductively coupled plasma
(ICPOES)
Termo de Adopção nº2013/ 1713, 2013-02-28
EN 50132-5-3:2012 ( 1ª Edição )
Alarm systems - CCTV surveillance systems for use in security
applications Part 5-3: Video transmission - Analogue and digital
video transmission
Termo de Adopção nº2013/ 1749, 2013-02-28
EN 50291-1:2010 /A 1:2012 ( 1ª Edição )
Electrical apparatus for the detection of carbon monoxide in
domestic premises Part 1: Test methods and performance
requirements
Termo de Adopção nº2013/ 1750, 2013-02-28
EN 50293:2012 ( 2ª Edição )
Road traffic signal systems - Electromagnetic compatibility
Termo de Adopção nº2013/ 1751, 2013-02-28
EN 50411-3-1:2012 ( 1ª Edição )
Fibre organisers and closures to be used in optical fibre
communications systems - Product specifications Part 3-1: Fibre
management system, splice wall box, for category C & G
Termo de Adopção nº2013/ 1752, 2013-02-28
EN 55016-1-4:2010 /A 1:2012 ( 3ª Edição )
Specification for radio disturbance and immunity measuring
apparatus and methods Part 1-4: Radio disturbance and immunity
measuring apparatus - Antennas and test sites for radiated
disturbance measurements
(CISPR 16-1-4:2010/A1:2012)
Termo de Adopção nº2013/ 1753, 2013-02-28
EN 55016-1-5:2004 /A 1:2012 ( 1ª Edição )
Specification for radio disturbance and immunity measuring
apparatus and methods Part 1-5: Radio disturbance and immunity
measuring apparatus - Specifications and validation procedures
for CALTS and REFTS from 30 MHz to 1 000 MHz
(CISPR 16-1-5:2003/A1:2012)
Termo de Adopção nº2013/ 1754, 2013-02-28
EN 60076-18:2012 ( 1ª Edição )
Power transformers Part 18: Measurement of frequency response
EN 16199:2012 ( 1ª Edição )
(IEC 60076-18:2012)
Fertilizers Determination of the sodium extracted by flameemission
Termo de Adopção nº2013/ 1755, 2013-02-28
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 10 15 março 2013

DOCUMENTOS
normativos
EN 60294:2012 ( 1ª Edição )
Measurement of the dimensions of a cylindrical component with
axial terminations
(IEC 60294:2012)
Termo de Adopção nº2013/ 1756, 2013-02-28
EN 60301:2012 ( 1ª Edição )
Preferred diameters of wire terminations of capacitors and resistors
(IEC 60301:2012)
Termo de Adopção nº2013/ 1757, 2013-02-28
EN 60317-0-8:2012 ( 1ª Edição )
Specifications for particular types of winding wires Part 0-8:
General requirements - Polyester glass fibre wound, resin or
varnish impregnated or not impregnated, bare or enamelled
rectangular copper wire
(IEC 60317-0-8:2012)
Termo de Adopção nº2013/ 1758, 2013-02-28
EN 60317-2:2012 ( 2ª Edição )
Specifications for particular types of winding wires Part 2:
Solderable polyurethane enamelled round copper wire, class 130,
with a bonding layer
(60317-2:2012)
Termo de Adopção nº2013/ 1759, 2013-02-28
EN 60317-48:2012 ( 2ª Edição )
Specifications for particular types of winding wires Part 48:
Glass-fibre wound resin or varnish impregnated, bare or enamelled
round copper wire, temperature index 155
(IEC 60317-48:2012)
Termo de Adopção nº2013/ 1760, 2013-02-28
EN 60317-49:2012 ( 2ª Edição )
Specifications for particular types of winding wires Part 49:
Glass-fibre wound high temperature resin or varnish impregnated,
bare or enamelled round copper wire, temperature index 180
(IEC 60317-49:2012)
Termo de Adopção nº2013/ 1761, 2013-02-28
EN 60317-50:2012 ( 2ª Edição )
Specifications for particular types of winding wires Part 50:
Glass-fibre wound silicone resin or varnish impregnated, bare or
enamelled round copper wire, temperature index 200
(IEC 60317-50:2012)
Termo de Adopção nº2013/ 1762, 2013-02-28
EN 60317-61:2012 ( 1ª Edição )
Specifications for particular types of winding wires Part 61:
Polyester glass fibres wound resin or varnish impregnated, bare or
enamelled rectangular copper wire, temperature index 180
(IEC 60317-61:2012)
Termo de Adopção nº2013/ 1763, 2013-02-28
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
machines for commercial use
(IEC 60335-2-67:2012, modif)
Termo de Adopção nº2013/ 1766, 2013-02-28
EN 60335-2-68:2012 ( 5ª Edição )
Household and similar electrical appliances - Safety Part 2-68:
Particular requirements for spray extraction machines for
commercial use
(IEC 60335-2-68:2012, modif)
Termo de Adopção nº2013/ 1767, 2013-02-28
EN 60335-2-72:2012 ( 3ª Edição )
Household and similar electrical appliances - Safety Part 2-72:
Particular requirements for floor treatment machines with or without
traction drive, for commercial use
(IEC 60335-2-72:2012, modif)
Termo de Adopção nº2013/ 1768, 2013-02-28
EN 60440:2012 ( 1ª Edição )
Method of measurement of non-linearity inresistors
(IEC 60440:2012)
Termo de Adopção nº2013/ 1769, 2013-02-28
EN 60512-24-1:2012 ( 1ª Edição )
Connectors for electronic equipment - Tests and measurements Part
24-1: Magnetic interference tests - Test 24a: Residual magnetism
(IEC 60512-24-1:2010)
Termo de Adopção nº2013/ 1770, 2013-02-28
EN 60544-2:2012 ( 1ª Edição )
Electrical insulating materials - Determination of the effects of
ionizing radiation on insulating materials Part 2: Procedures for
irradiation and test
(IEC 60544-2:2012)
Termo de Adopção nº2013/ 1771, 2013-02-28
EN 60626-3:2008 /A 1:2012 ( 2ª Edição )
Combined flexible materials for electrical insulation Part 3:
Specifications for individual materials
(IEC 60626-3:2008/A1:2012)
Termo de Adopção nº2013/ 1772, 2013-02-28
EN 60728-3-1:2012 ( 1ª Edição )
Cable networks for television signals, sound signals and interactive
services Part 3-1: Methods of measurement of non-linearity for full
digital channel load with DVB-C signals
(IEC 60728-3-1:2012)
Termo de Adopção nº2013/ 1773, 2013-02-28
EN 60809:1996 /A 5:2012 ( 1ª Edição )
Lamps for road vehicles - Dimensional, electrical and luminous
requirements
(IEC 60809:1995/A5:2012)
Termo de Adopção nº2013/ 1774, 2013-02-28
EN 60317-62:2012 ( 1ª Edição )
Specifications for particular types of winding wires Part 62:
Polyester glass fibre wound resin or varnish impregnated, bare or
enamelled rectangular copper wire, temperature index 200
(IEC 60317-62:2012)
Termo de Adopção nº2013/ 1764, 2013-02-28
EN 60335-2-54:2008 /A 11:2012 ( 4ª Edição )
Household and similar electrical appliances - Safety Part 2-54:
Particular requirements for surface-cleaning appliances for
household use employing liquids or steam
Termo de Adopção nº2013/ 1765, 2013-02-28
EN 60876-1:2012 ( 2ª Edição )
Fibre optic interconnecting devices and passive components - Fibre
optic spatial switches Part 1: Generic specification
(IEC 60876-1:2012)
Termo de Adopção nº2013/ 1775, 2013-02-28
EN 60893-3-1:2012 ( 3ª Edição )
Insulating materials - Industrial rigid laminated sheets based on
thermosetting resins for electrical purposes Part 3-1: Specifications
for individual materials - Types of industrial rigid laminated sheets
(IEC 60893-3-1:2012)
Termo de Adopção nº2013/ 1776, 2013-02-28
EN 60335-2-67:2012 ( 5ª Edição )
Household and similar electrical appliances - Safety Part 2-67:
Particular requirements for floor treatment and floor treatment
EN 60898-1:2003 /A 13:2012 ( 1ª Edição )
Electrical accessories - Circuit breakers for overcurrent protection
for household and similar installations Part 1: Circuit-breakers for
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 11 15 março 2013

DOCUMENTOS
normativos
a.c. operation
Termo de Adopção nº2013/ 1777, 2013-02-28
EN 60917-2-5:2012 ( 1ª Edição )
Modular order for the development of mechanical structures for
electronic equipment practices Part 2-5: Sectinal specification -
Interface co-ordination dimensions for the 25 mm equipment
practice - Cabinet interface dimensions for miscellaneous equipment
(IEC 60917-2-5:2012)
Termo de Adopção nº2013/ 1778, 2013-02-28
EN 60947-4-1:2010 /A 1:2012 ( 1ª Edição )
Low-voltage switchgear and controlgear Part 4-1: Contactors and
motor-starters - Electromechanical contactors and motor-starters
(IEC 60947-4-1:2009/A1:2012)
Termo de Adopção nº2013/ 1779, 2013-02-28
EN 61000-4-4:2012 ( 3ª Edição )
Electromagnetic compatibility (EMC) Part 4-4: Testing and
measurement techniques - Electrical fast transient/burst immunity
test
(IEC 61000-4-4:2012)
Termo de Adopção nº2013/ 1780, 2013-02-28
EN 61169-47:2012 ( 1ª Edição )
Radio-frequency connectors Part 47: Sectional specification for
radio-frequency coaxial connectors with clamp coupling, typically
for use in 75 cable networks (type F-Quick)
(IEC 61169-47:2012)
Termo de Adopção nº2013/ 1781, 2013-02-28
EN 61240:2012 ( 2ª Edição )
Piezoelectric devices - Preparation of outline drawings of
surface-mounted device (SMD) for frequency control and selection
- General rules
(IEC 61240:2012)
Termo de Adopção nº2013/ 1782, 2013-02-28
EN 61300-2-33:2012 ( 3ª Edição )
Fibre optic interconnecting devices and passive components - Basic
test and measurement procedures Part 2-33: Tests - Assembly and
disassembly of fibre optic mechanical splices, fibre management
systems and closures
(IEC 61300-2-33:2012)
Termo de Adopção nº2013/ 1783, 2013-02-28
EN 61549:2003 /A 3:2012 ( 2ª Edição )
Miscellaneous lamps
(IEC 61549:2003/A3:2012)
Termo de Adopção nº2013/ 1784, 2013-02-28
EN 61754-26:2012 ( 1ª Edição )
Fibre optic interconnecting devices and passive components - Fibre
optic connector interfaces Part 26: Type SF connector family
(IEC 61754-26:2012)
Termo de Adopção nº2013/ 1785, 2013-02-28
EN 61788-13:2012 ( 2ª Edição )
Superconductivity Part 13: AC loss measurements - Magnetometer
methods for hysteresis loss in superconducting multifilamentary
composites
(IEC 61788-13:2012)
Termo de Adopção nº2013/ 1786, 2013-02-28
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
EN 62035:2000 /A 2:2012 ( 1ª Edição )
Discharge lamps (excluding fluorescent lamps) - Safety
specifications
(IEC 62035:1999/A2:2012)
Termo de Adopção nº2013/ 1788, 2013-02-28
EN 62037-3:2012 ( 1ª Edição )
Passive RF and microwave devices, intermodulation level
measurement Part 3: Measurement of passive intermodulation in
coaxial connectors
(IEC 62037-3:2012)
Termo de Adopção nº2013/ 1789, 2013-02-28
EN 62037-4:2012 ( 1ª Edição )
Passive RF and microwave devices, intermodulation level
measurement Part 4: Measurement of passive intermodulation in
coaxial cables
(IEC 62037-4:2012)
Termo de Adopção nº2013/ 1790, 2013-02-28
EN 62132-8:2012 ( 1ª Edição )
Integrated circuits - Measurement of electromagnetic immunity Part
8: Measurement of radiated immunity - IC stripline method
(IEC 62132-8:2012)
Termo de Adopção nº2013/ 1791, 2013-02-28
EN 62150-3:2012 ( 1ª Edição )
Fibre optic active components and devices - Test and measurement
procedures Part 3: Optical power variation induced by mechanical
disturbance in optical receptacles and transceiver interfaces
(IEC 62150-3:2012)
Termo de Adopção nº2013/ 1792, 2013-02-28
EN 62282-6-200:2012 ( 2ª Edição )
Fuel cell technologies Part 6-200: Micro fuel cell power systems -
Performance test methods
(IEC 62282-6-200:2012)
Termo de Adopção nº2013/ 1793, 2013-02-28
EN 62439-3:2012 ( 2ª Edição )
Industrial communication networks - High availability automation
networks Part 3: Parallel Redundancy Protocol (PRP) and
High-availability Seamless Redundancy (HSR)
(IEC 62439-3:2012)
Termo de Adopção nº2013/ 1794, 2013-02-28
EN 62477-1:2012 ( 1ª Edição )
Safety requirements for power electronic converter systems and
equipment Part 1: General
(IEC 62477-1:2012)
Termo de Adopção nº2013/ 1795, 2013-02-28
EN 62541-9:2012 ( 1ª Edição )
OPC unified architecture Part 9: Alarms and conditions
(IEC 62541-9:2012)
Termo de Adopção nº2013/ 1796, 2013-02-28
EN 62541-10:2012 ( 1ª Edição )
OPC unified architecture Part 10: Programs
(IEC 62541-10:2012)
Termo de Adopção nº2013/ 1797, 2013-02-28
EN 61987-11:2012 ( 1ª Edição )
Industrial-process measurement and control - Data structures and
elements in process equipment catalogues Part 11: List of
properties (LOP) of measuring equipment for electronic data
exchange - Generic structures
(IEC 61987-11:2012)
Termo de Adopção nº2013/ 1787, 2013-02-28
EN 62575-2:2012 ( 1ª Edição )
Radio frequency (RF) bulk acoustic wave (BAW) filters of assessed
quality Part 2 :Guidelines for to the use
(IEC 62575-2:2012)
Termo de Adopção nº2013/ 1798, 2013-02-28
EN 62585:2012 ( 1ª Edição )
Electroacoustics - Methods to determine corrections to obtain the
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 12 15 março 2013

DOCUMENTOS
normativos
free-field response of a sound level meter
(IEC 62585:2012)
Termo de Adopção nº2013/ 1799, 2013-02-28
EN 62729:2012 ( 1ª Edição )
Maritime navigation and radiocommunication equipment and
systems
- Shipborne equipment for long-range identification and tracking
(LRIT) - Performance requirements
(IEC 62729:2012)
Termo de Adopção nº2013/ 1800, 2013-02-28
EN 300386:2012 ( V1.6.1 )
Electromagnetic compatibility and Radio spectrum Matters (ERM);
Telecommunication network equipment; ElectroMagnetic
Compatibility (EMC) requirements
Termo de Adopção nº2013/ 1801, 2013-02-28
EN 300468:2012 ( V1.13.1 )
Digital Video Broadcasting (DVB); Specification for Service
Information (SI) in DVB systems
Termo de Adopção nº2013/ 1802, 2013-02-28
EN 301489-17:2012 ( V2.2.1 )
Electromagnetic compatibility and Radio spectrum Matters (ERM);
ElectroMagnetic Compatibility (EMC) standard for radio equipment
Part 17: Specific conditions for Broadband Data Transmission
Systems
Termo de Adopção nº2013/ 1803, 2013-02-28
EN 301843-1:2012 ( V1.3.1 )
Electromagnetic compatibility and Radio spectrum Matters (ERM);
ElectroMagnetic Compatibility (EMC) standard for marine radio
equipment and services Part 1: Common technical requirements
Termo de Adopção nº2013/ 1804, 2013-02-28
EN ISO 1874-2:2012 ( 3ª Edição )
Plastics Polyamide (PA) moulding and extrusion materials Part 2:
Preparation of test specimens and determination of properties
(ISO 1874-2:2012)
Termo de Adopção nº2013/ 1714, 2013-02-28
EN ISO 3183:2012 ( 1ª Edição )
Petroleum and natural gas industries Steel pipe for pipeline
transportation systems
(ISO 3183:2012)
Termo de Adopção nº2013/ 1715, 2013-02-28
EN ISO 4136:2012 ( 2ª Edição )
Destructive tests on welds in metallic materials Transverse tensile
test
(ISO 4136:2012)
Termo de Adopção nº2013/ 1716, 2013-02-28
EN ISO 4628-8:2012 ( 2ª Edição )
Paints and varnishes Evaluation of degradation of coatings -
Designation of quantity and size of defects, and of intensity of
uniform changes in appearance Part 8: Assessment of degree of
delamination and corrosion around a scribe or other artificial defect
(ISO 4628-8:2012)
Termo de Adopção nº2013/ 1717, 2013-02-28
EN ISO 5356-2:2012 ( 2ª Edição )
Anaesthetic and respiratory equipment
Conical connectors Part 2: Screw-threaded weight-bearing
connectors
(ISO 5356-2:2012)
Termo de Adopção nº2013/ 1718, 2013-02-28
EN ISO 5667-3:2012 ( 3ª Edição )
Water quality Sampling Part 3: Preservation and handling of water
samples
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
(ISO 5667-3:2012)
Termo de Adopção nº2013/ 1719, 2013-02-28
EN ISO 7625:2012 ( 2ª Edição )
Sintered metal materials, excluding hardmetals Preparation of
samples for chemical analysis for determination of carbon content
(ISO 7625:2012)
Termo de Adopção nº2013/ 1720, 2013-02-28
EN ISO 9016:2012 ( 2ª Edição )
Destructive tests on welds in metallic materials - Impact tests Test
specimen location, notch orientation and examination
(ISO 9016:2012)
Termo de Adopção nº2013/ 1721, 2013-02-28
EN ISO 10685-2:2012 ( 1ª Edição )
Ophthalmic optics Spectacle frames and sunglasses electronic
catalogue and identification Part 2: Commercial information
(ISO 10685-2:2012)
Termo de Adopção nº2013/ 1722, 2013-02-28
EN ISO 10685-3:2012 ( 1ª Edição )
Ophthalmic optics Spectacle frames and sunglasses electronic
catalogue and identification Part 3: Technical information
(ISO 10685-3:2012)
Termo de Adopção nº2013/ 1723, 2013-02-28
EN ISO 11073-10420:2012 ( 1ª Edição )
Health informatics Personal health device communication Part
10420: Device specialization - Body composition analyzer
(ISO 11073-10420:2012)
Termo de Adopção nº2013/ 1725, 2013-02-28
EN ISO 11073-10421:2012 ( 1ª Edição )
Health informatics Personal health device communication Part
10421: Device specialization - Peak expiratory flow monitor (peak
flow)
(ISO 11073-10421:2012)
Termo de Adopção nº2013/ 1726, 2013-02-28
EN ISO 11073-10472:2012 ( 1ª Edição )
Health Informatics Personal health device communication Part
10472: Device specialization - Medication monitor
(ISO 11073-10472:2012)
Termo de Adopção nº2013/ 1724, 2013-02-28
EN ISO 11073-30400:2012 ( 1ª Edição )
Health informatics Point-of-care medical device communication Part
30400: Interface profile - Cabled Ethernet
(ISO 11073-30400:2012)
Termo de Adopção nº2013/ 1727, 2013-02-28
EN ISO 11238:2012 ( 1ª Edição )
Health informatics Identification of medicinal products Data
elements and structures for the unique identification and exchange
of regulated information on substances
(ISO 11238:2012)
Termo de Adopção nº2013/ 1728, 2013-02-28
EN ISO 11239:2012 ( 1ª Edição )
Health informatics Identification of medicinal products Data
elements and structures for the unique identification and exchange
of regulated information on pharmaceutical dose forms, units of
presentation, routes of administration and packaging
(ISO 11239:2012)
Termo de Adopção nº2013/ 1729, 2013-02-28
EN ISO 11240:2012 ( 1ª Edição )
Health informatics Identification of medicinal products Data
elements and structures for the unique identification and exchange
of units of measurement
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 13 15 março 2013

DOCUMENTOS
normativos
(ISO 11240:2012)
Termo de Adopção nº2013/ 1730, 2013-02-28
EN ISO 11615:2012 ( 1ª Edição )
Health informatics Identification of medicinal products Data
elements and structures for the unique identification and exchange
of regulated medicinal product information
(ISO 11615:2012)
Termo de Adopção nº2013/ 1731, 2013-02-28
EN ISO 11616:2012 ( 1ª Edição )
Health informatics Identification of medicinal products Data
elements and structures for the unique identification and exchange
of regulated pharmaceutical product information
(ISO 11616:2012)
Termo de Adopção nº2013/ 1732, 2013-02-28
EN ISO 11640:2012 ( 2ª Edição )
Leather Tests for colour fastness Colour fastness to cycles of
to-and-fro rubbing
(ISO 11640:2012)
Termo de Adopção nº2013/ 1733, 2013-02-28
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
EN ISO 15027-1:2012 ( 2ª Edição )
Immersion suits Part 1: Constant wear suits, requirements including
safety
(ISO 15027-1:2012)
Termo de Adopção nº2013/ 1743, 2013-02-28
EN ISO 15027-2:2012 ( 2ª Edição )
Immersion suits Part 2: Abandonment suits, requirements including
safety
(ISO 15027-2:2012)
Termo de Adopção nº2013/ 1744, 2013-02-28
EN ISO 15027-3:2012 ( 2ª Edição )
Immersion suits Part 3: Test methods
(ISO 15027-3:2012)
Termo de Adopção nº2013/ 1745, 2013-02-28
EN ISO 15189:2012 ( 3ª Edição )
Medical laboratories Requirements for quality and competence
(ISO 15189:2012)
Termo de Adopção nº2013/ 1746, 2013-02-28
EN ISO 11641:2012 ( 2ª Edição )
Leather Tests for colour fastness Colour fastness to perspiration
(ISO 11641:2012)
Termo de Adopção nº2013/ 1734, 2013-02-28
EN ISO 11642:2012 ( 2ª Edição )
Leather Tests for colour fastness Colour fastness to water
(ISO 11642:2012)
Termo de Adopção nº2013/ 1735, 2013-02-28
EN ISO 11963:2012 ( 2ª Edição )
Plastics Polycarbonate sheets Types, dimensions and characteristics
(ISO 11963:2012)
Termo de Adopção nº2013/ 1736, 2013-02-28
EN ISO 19152:2012 ( 1ª Edição )
Geographic information Land Administration Domain Model
(LADM)
(ISO 19152:2012)
Termo de Adopção nº2013/ 1747, 2013-02-28
EN ISO 21487:2012 ( 2ª Edição )
Small craft - Permanently installed petrol and diesel fuel tanks
(ISO 21487:2012)
Termo de Adopção nº2013/ 1748, 2013-02-28
EN ISO 11980:2012 ( 3ª Edição )
Ophthalmic optics Contact lenses and contact lens care products
Guidance for clinical investigations
(ISO 11980:2012)
Termo de Adopção nº2013/ 1737, 2013-02-28
EN ISO 13119:2012 ( 1ª Edição )
Health informatics Clinical knowledge resources Metadata
(ISO 13119:2012)
Termo de Adopção nº2013/ 1738, 2013-02-28
EN ISO 13293:2012 ( 1ª Edição )
Recreational diving services - Requirements for gas blender
training programmes
(ISO 13293:2012)
Termo de Adopção nº2013/ 1739, 2013-02-28
EN ISO 13666:2012 ( 2ª Edição )
Ophthalmic optics Spectacle lenses Vocabulary
(ISO 13666:2012)
Termo de Adopção nº2013/ 1740, 2013-02-28
EN ISO 13944:2012 ( 2ª Edição )
Lubricated metal-powder mixes Determination of lubricant content -
Soxhlet extraction method
(ISO 13944:2012)
Termo de Adopção nº2013/ 1741, 2013-02-28
EN ISO 14268:2012 ( 2ª Edição )
Leather Physical and mechanical tests Determination of water
vapour permeability
(ISO 14268:2012)
Termo de Adopção nº2013/ 1742, 2013-02-28
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 14 15 março 2013

DOCUMENTOS
normativos
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
2. Normas Europeias Publicadas
2.1 CEN
Normas Europeias aprovadas na área não eletrotécnica pelo Comité Europeu de Normalização
(CEN), e pelo Comité Europeu para a Normalização do Ferro e do Aço (ECISS).
Para cada referência, menciona-se o comité técnico, a designação codificada e o título.
TC 395
EN 16310:2013 ( Ed. 1 )
Engineering services Terminology to describe engineering services
for buildings, infrastructure and industrial facilities
TC 395
EN 16311:2013 ( Ed. 1 )
Engineering services Terminology to describe engineering services
for industrial products
TC 19
CEN/TR 15993:2013 ( Ed. 2 )
Automotive fuels Ethanol (E85) automotive fuel Background to the
parameters required and their respective limits and determination
TC 19
EN 14274:2013 ( Ed. 2 )
Automotive fuels Assessment of petrol and diesel quality Fuel
quality monitoring system (FQMS)
TC 19
EN 14275:2013 ( Ed. 2 )
Automotive fuels Assessment of petrol and diesel fuel quality
Sampling from retail site pumps and commercial site fuel dispensers
TC 19
EN 16143:2013 ( Ed. 1 )
Petroleum products Determination of content of Benzo(a)pyrene
(BaP) and selected polycyclic aromatic hydrocarbons (PAH) in
extender oils Procedure using double LC cleaning and GC/MS
analysis
TC 23
EN ISO 21007-2:2013 ( Ed. 2 )
Gas cylinders Identification and marking using radio frequency
identification technology Part 2: Numbering schemes for radio
frequency identification
(ISO 21007-2:2013)
TC 33
EN 12428:2013 ( Ed. 2 )
Industrial, commercial and garage doors Thermal transmittance
Requirements for the calculation
TC 33
EN 13126-9:2013 ( Ed. 1 )
Building hardware Requirements and test methods for windows and
door height windows Part 9: Hardware for horizontal and vertical
pivot windows
TC 49
EN 30-1-1:2008+A3:2013 ( Ed. 1 )
Domestic cooking appliances burning gas Part 1-1: Safety - General
TC 50
EN 40-3-1:2013 ( Ed. 2 )
Lighting columns Part 3-1: Design and verification - Specification
for characteristic loads
TC 50
EN 40-3-2:2013 ( Ed. 2 )
Lighting columns Part 3-2: Design and verification - Verification by
testing
TC 50
EN 40-3-3:2013 ( Ed. 2 )
Lighting columns Part 3-3: Design and verification - Verification by
calculation
TC 52
CEN/TR 15371:2013 ( Ed. 3 )
Safety of toys Replies to requests for interpretation of EN 71-1, EN
71-2, and EN 71-8
TC 55
EN ISO 10323:2013 ( Ed. 2 )
Dentistry Bore diameters for rotary instruments such as discs and
wheels
(ISO 10323:2013)
TC 55
EN ISO 13078:2013 ( Ed. 1 )
Dentistry Dental furnace Test method for temperature measurement
with separate thermocouple
(ISO 13078:2013)
TC 69
EN 13774:2013 ( Ed. 2 )
Valves for gas distribution systems with maximum operating
pressure
less than or equal to 16 bar - Performance requirements
TC 88
EN 14303:2009+A1:2013 ( Ed. 1 )
Thermal insulation products for building equipment and industrial
installations Factory made mineral wool (MW) products
Specification
TC 88
EN 14304:2009+A1:2013 ( Ed. 1 )
Thermal insulation products for building equipment and industrial
installations Factory made flexible elastomeric foam (FEF) products
Specification
TC 88
EN 14305:2009+A1:2013 ( Ed. 1 )
Thermal insulation products for building equipment and industrial
installations Factory made cellular glass (CG) products Specification
TC 88
EN 14306:2009+A1:2013 ( Ed. 1 )
Thermal insulation products for building equipment and industrial
installations Factory made calcium silicate (CS) products
Specification
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 15 15 março 2013

DOCUMENTOS
normativos
TC 88
EN 14307:2009+A1:2013 ( Ed. 1 )
Thermal insulation products for building equipment and industrial
installations Factory made extruded polystyrene foam (XPS)
products Specification
TC 88
EN 14309:2009+A1:2013 ( Ed. 1 )
Thermal insulation products for building equipment and industrial
installations Factory made products of expanded polystyrene (EPS)
Specification
TC 88
EN 14313:2009+A1:2013 ( Ed. 1 )
Thermal insulation products for building equipment and industrial
installations Factory made polyethylene foam (PEF) products
Specification
TC 88
EN 14314:2009+A1:2013 ( Ed. 1 )
Thermal insulation products for building equipment and industrial
installations Factory made phenolic foam (PF) products
Specification
TC 88
EN ISO 14308:2009+A1:2013 ( Ed. 1 )
Thermal insulation products for building equipment and industrial
installations Factory made rigid polyurethane foam (PUR) and
polyisocyanurate foam (PIR) products Specification
TC 107
EN 253:2009+A1:2013 ( Ed. 1 )
District heating pipes Preinsulated bonded pipe systems for directly
buried hot water networks Pipe assembly of steel service pipe,
polyurethane thermal insulation and outer casing of polyethylene
TC 122
EN ISO 9241-154:2013 ( Ed. 1 )
Ergonomics of human-system interaction Part 154: Interactive voice
response (IVR) applications
(ISO 9241-154:2013)
TC 133
CEN/TS 13388:2013 ( Ed. 3 )
Copper and copper alloys Compendium of compositions and
products
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
TC 142
EN 12750:2013 ( Ed. 2 )
Safety of woodworking machines Four sided moulding machines
TC 155
CEN/TS 1555-7:2013 ( Ed. 2 )
Plastics piping systems for the supply of gaseous fuels Polyethylene
(PE) Part 7: Guidance for the assessment of conformity
TC 155
EN 1796:2013 ( Ed. 2 )
Plastics piping systems for water supply with or without pressure
Glass-reinforced thermosetting plastics (GRP) based on unsaturated
polyester resin (UP)
TC 155
EN 14364:2013 ( Ed. 2 )
Plastics piping systems for drainage and sewerage with or without
pressure Glass-reinforced thermosetting plastics (GRP) based on
unsaturated polyester resin (UP) Specifications for pipes, fittings
and joints
TC 155
EN ISO 11296-7:2013 ( Ed. 1 )
Plastics piping systems for renovation of underground non-pressure
drainage and sewerage networks Part 7: Lining with spirally-wound
pipes
(ISO 11296-7:2011)
TC 155
EN ISO 11299-1:2013 ( Ed. 1 )
Plastics piping systems for renovation of underground gas supply
networks Part 1: General
(ISO 11299-1:2011)
TC 155
EN ISO 11299-3:2013 ( Ed. 1 )
Plastics piping systems for renovation of underground gas supply
networks Part 3: Lining with close-fit pipes
(ISO 11299-3:2011)
TC 155
EN ISO 15874-1:2013 ( Ed. 2 )
Plastics piping systems for hot and cold water installations
Polypropylene (PP) Part 1: General
(ISO 15874-1:2013)
TC 136
EN 12503-1:2013 ( Ed. 2 )
Sports mats Part 1: Gymnastic mats, safety requirements
TC 139
EN ISO 1524:2013 ( Ed. 2 )
Paints, varnishes and printing inks Determination of fineness of
grind
(ISO 1524:2013)
TC 139
EN ISO 2409:2013 ( Ed. 3 )
Paints and varnishes Cross-cut test
(ISO 2409:2013)
TC 139
EN ISO 20566:2013 ( Ed. 2 )
Paints and varnishes Determination of the scratch resistance of a
coating system using a laboratory-scale car-wash
(ISO 20566:2013)
TC 140
EN ISO 23640:2013 ( Ed. 2 )
In vitro diagnostic medical devices Evaluation of stability of in
vitro diagnostic reagents
(ISO 23640:2011)
TC 155
EN ISO 15874-2:2013 ( Ed. 2 )
Plastics piping systems for hot and cold water installations
Polypropylene (PP) Part 2: Pipes
(ISO 15874-2:2013)
TC 155
EN ISO 15874-3:2013 ( Ed. 2 )
Plastics piping systems for hot and cold water installations
Polypropylene (PP) Part 3: Fittings
(ISO 15874-3:2013)
TC 155
EN ISO 15874-5:2013 ( Ed. 2 )
Plastics piping systems for hot and cold water installations
Polypropylene (PP) Part 5: Fitness for purpose of the system
(ISO 15874-5:2013)
TC 156
EN 16445:2013 ( Ed. 1 )
Ventilation for buildings Air diffusion Aerodynamic testing and
rating for mixed flow application: non-isothermal procedure for cold
jet
TC 158
EN 1080:2013 ( Ed. 2 )
Impact protection helmets for young children
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 16 15 março 2013

DOCUMENTOS
normativos
TC 165
EN 295-1:2013 ( Ed. 2 )
Vitrified clay pipe systems for drains and sewers Part 1:
Requirements
for pipes, fittings and joints
TC 165
EN 295-2:2013 ( Ed. 2 )
Vitrified clay pipe systems for drains and sewers Part 2: Evaluation
of conformity and sampling
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
TC 205
EN ISO 8536-5:2013 ( Ed. 2 )
Infusion equipment for medical use Part 5: Burette infusion sets for
single use, gravity feed
(ISO 8536-5:2004)
TC 205
EN ISO 20072:2013 ( Ed. 2 )
Aerosol drug delivery device design verification Requirements and
test methods
(ISO 20072:2009)
TC 165
EN 295-4:2013 ( Ed. 2 )
Vitrified clay pipe systems for drains and sewers Part 4:
Requirements for adaptors, connectors and flexible couplings
TC 165
EN 295-5:2013 ( Ed. 2 )
Vitrified clay pipe systems for drains and sewers Part 5:
Requirements for perforated pipes and fittings
TC 165
EN 295-6:2013 ( Ed. 2 )
Vitrified clay pipes systems for drain and sewers Part 6:
Requirements for components of manholes and inspection chambers
TC 165
EN 295-7:2013 ( Ed. 2 )
Vitrified clay pipe systems for drains and sewers Part 7:
Requirements for pipes and joints for pipe jacking
TC 165
EN 12566-6:2013 ( Ed. 1 )
Small wastewater treatment systems for up to 50 PT Part 6:
Prefabricated treatment units for septic tank effluent
TC 188
EN ISO 14890:2013 ( Ed. 2 )
Conveyor belts Specification for rubber- or plastics-covered
conveyor
belts of textile construction for general use
(ISO 14890:2013)
TC 188
EN ISO 21182:2013 ( Ed. 2 )
Light conveyor belts Determination of the coefficient of friction
(ISO 21182:2013)
TC 192
EN 1846-2:2009+A1:2013 ( Ed. 1 )
Firefighting and rescue service vehicles Part 2: Common
requirements - Safety and performance
TC 205
EN 455-2:2009+A2:2013 ( Ed. 1 )
Medical gloves for single use Part 2: Requirements and testing for
physical properties
TC 205
EN 13795-:2011+A1:2013 ( Ed. 1 )
Surgical drapes, gowns and clean air suits, used as medical devices
for patients, clinical staff and equipment General requirements for
manufacturers, processors and products, test methods, performance
requirements and performance levels
TC 205
EN ISO 8536-4:2013 ( Ed. 4 )
Infusion equipment for medical use Part 4: Infusion sets for single
use, gravity feed
(ISO 8536-4:2010)
TC 205
EN ISO 22413:2013 ( Ed. 2 )
Transfer sets for pharmaceutical preparations Requirements and
test methods
(ISO 22413:2010)
TC 205
EN ISO 23908:2013 ( Ed. 2 )
Sharps injury protection Requirements and test methods Sharps
protection features for single-use hypodermic needles, introducers
for catheters and needles used for blood sampling
(ISO 23908:2011)
TC 216
EN 12353:2013 ( Ed. 3 )
Chemical disinfectants and antiseptics Preservation of test organisms
used for the determination of bactericidal (including Legionella),
mycobactericidal, sporicidal, fungicidal and virucidal (including
bacteriophages) activity
TC 226
EN 1423:2012 /AC :2013 ( Ed. 1 )
Road marking materials Drop on materials Glass beads, antiskid
aggregates and mixtures of the two
TC 231
EN 12786:2013 ( Ed. 2 )
Safety of machinery Requirements for the drafting of the vibration
clauses of safety standards
TC 243
EN ISO 14644-8:2013 ( Ed. 2 )
Cleanrooms and associated controlled environments Part 8:
Classification of air cleanliness by chemical concentration (ACC)
(ISO 14644-8:2013)
TC 246
EN 16306:2013 ( Ed. 1 )
Natural stone test methods Determination of resistance of marble to
thermal and moisture cycles
TC 249
EN ISO 472:2013 ( Ed. 2 )
Plastics Vocabulary
(ISO 472:2013)
TC 250
EN 1991-1-2:2002 /AC :2013 ( Ed. 3 )
Eurocode 1: Actions on structures Part 1-2: General actions - Actions
on structures exposed to fire
TC 250
EN 1991-1-6:2005 /AC :2013 ( Ed. 3 )
Eurocode 1 Actions on structures Part 1-6: General actions -
Actions during execution
TC 250
EN 1998-1:2004 /A 1:2013 ( Ed. 1 )
Eurocode 8: Design of structures for earthquake resistance Part 1:
General rules, seismic actions and rules for buildings
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 17 15 março 2013

DOCUMENTOS
normativos
TC 254
EN 13984:2013 ( Ed. 2 )
Flexible sheets for waterproofing Plastic and rubber vapour control
layers Definitions and characteristics
TC 261
EN 16283:2013 ( Ed. 1 )
Packaging Flexible aluminium tubes Test method to measure the
force to pierce the membrane
TC 261
EN 16284:2013 ( Ed. 1 )
Packaging Flexible laminate and plastic tubes Test method to
determine the adhesive strength of the membrane
TC 261
EN 16285:2013 ( Ed. 1 )
Packaging Flexible aluminium tubes Test method to measure the
deformation of the aluminium tube body (Guillotine test)
TC 261
EN ISO 445:2013 ( Ed. 3 )
Pallets for materials handling Vocabulary
(ISO 445:2013)
TC 263
EN 1047-2:2009+A1:2013 ( Ed. 1 )
Secure storage units Classification and methods of test for
resistance to fire Part 2: Data rooms and data container
TC 274
EN 12312-1:2013 ( Ed. 2 )
Aircraft ground support equipment Specific requirements Part 1:
Passenger stairs
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
cylinder and pressure vessel valves Specification and testing
TC 290
EN ISO 1101:2013 ( Ed. 2 )
Geometrical product specifications (GPS) Geometrical tolerancing
Tolerances of form, orientation, location and runout
(ISO 1101:2012, including Cor 1:2013)
TC 290
EN ISO 16610-85:2013 ( Ed. 1 )
Geometrical product specifications (GPS) Filtration Part 85:
Morphological areal filters: Segmentation
(ISO 16610-85:2013)
TC 292
EN 16123:2013 ( Ed. 1 )
Characterization of waste Guidance on selection and application of
screening methods
TC 296
EN 14564:2013 ( Ed. 2 )
Tanks for transport of dangerous goods Terminology
TC 318
CEN/TR 16469:2013 ( Ed. 1 )
Hydrometry Measurement of the rainfall intensity (liquid
precipitation): requirements, calibration methods and field
measurements
TC 345
EN ISO 10930:2013 ( Ed. 1 )
Soil quality Measurement of the stability of soil aggregates subjected
to the action of water
(ISO 10930:2012)
TC 275
EN ISO 21572:2013 ( Ed. 2 )
Foodstuffs Molecular biomarker analysis Protein-based methods
(ISO 21572:2013)
TC 278
CEN ISO/TS 18234-3:2013 ( Ed. 2 )
Intelligent transport systems Traffic and travel information via
transport protocol experts group, generation 1 (TPEG1) binary data
format Part 3: Service and network information (TPEG1-SNI)
(ISO/TS 18234-3:2013)
TC 278
CEN ISO/TS 18234-11:2013 ( Ed. 1 )
Intelligent transport systems Traffic and Travel Information (TTI)
via transport protocol experts group, generation 1 (TPEG1) binary
data format Part 11: Location Referencing Container (TPEG1-LRC)
(ISO/TS 18234-11:2013)
TC 278
CEN/TS 16439:2013 ( Ed. 1 )
Electronic fee collection Security framework
TC 278
EN 16312:2013 ( Ed. 1 )
Intelligent transport systems Automatic Vehicle and Equipment
Registration (AVI/AEI) Interoperable application profile for
AVI/AEI and Electronic Register Identification using dedicated
short range communication
TC 281
EN 1860-1:2013 ( Ed. 2 )
Appliances, solid fuels and firelighters for barbecueing Part 1:
Barbecues burning solid fuels - Requirements and test methods
TC 286
EN 16119:2013 ( Ed. 1 )
LPG equipment and accessories Sealing caps and plugs for LPG
TC 345
EN ISO 23611-5:2013 ( Ed. 1 )
Soil quality Sampling of soil invertebrates Part 5: Sampling and
extraction of soil macro-invertebrates
(ISO 23611-5:2011)
TC 346
EN 16302:2013 ( Ed. 1 )
Conservation of cultural heritage Test methods Measurement of
water absorption by pipe method
TC 354
EN 16230-1:2013 ( Ed. 1 )
Leisure karts Part 1: Safety requirements and test methods for karts
TC 400
CEN/TS 16172:2013 ( Ed. 1 )
Sludge, treated biowaste and soil Determination of elements using
graphite furnace atomic absorption spectrometry (GF-AAS)
TC 400
CEN/TS 16175-1:2013 ( Ed. 1 )
Sludge, treated biowaste and soil Determination of mercury Part
1: Cold-vapour atomic absorption spectrometry (CV-AAS)
TC 400
CEN/TS 16175-2:2013 ( Ed. 1 )
Sludge, treated biowaste and soil Determination of mercury Part
2: Cold-vapour atomic fluorescence spectrometry (CV-AFS)
TC CST01
EN ISO 16147:2002 /A 1:2013 ( Ed. 1 )
Small craft Inboard diesel engines - Engine-mounted fuel and
electrical components Amendment 1
(ISO 16147:2002/Amd 1:2013)
TC AECMA
EN 3645-001:2013 ( Ed. 2 )
Aerospace series Connectors, electrical, circular, scoop-proof,
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 18 15 março 2013

DOCUMENTOS
normativos
triple start threaded coupling, operating temperature 175 °C or
200 °C continuous Part 001: Technical specification
TC AECMA
EN 3697:2013 ( Ed. 1 )
Aerospace series Acrylonitrile-butadiene rubber (NBR) - Low
temperature resistant Hardness 60 IRHD
TC AECMA
EN 4199-001:2013 ( Ed. 2 )
Aerospace series Bonding straps for aircraft Part 001: Technical
specification
TC AECMA
EN 4701-001:2013 ( Ed. 1 )
Aerospace series Connectors, optical, rectangular, modular,
operating temperature 125 °C, for EN 4531 contacts Part 001:
Technical specification
TC AECMA
EN 9300-004:2013 ( Ed. 1 )
Aerospace series LOTAR - Long Term Archiving and Retrieval of
digital technical product documentation such as 3D, CAD and
PDM data Part 004: Description methods
TC AECMA
EN 9300-011:2013 ( Ed. 1 )
Aerospace series LOTAR Long Term Archiving and Retrieval of
digital technical product documentation such as 3D, CAD and
PDM data Part 011: Reference process description "Data
preparation"
TC AECMA
EN 9300-012:2013 ( Ed. 1 )
Aerospace series LOTAR Long Term Archiving and Retrieval of
digital technical product documentation such as 3D, CAD and
PDM data Part 012: Reference process description ''Ingest''
TC AECMA
EN 9300-013:2013 ( Ed. 1 )
Aerospace series LOTAR LOng Term Archiving and Retrieval of
digital technical product documentation such as 3D, CAD and
PDM data Part 013: Reference process description ''Archival
Storage''
TC AECMA
EN 9300-014:2013 ( Ed. 1 )
Aerospace series LOTAR - LOng Term Archiving and Retrieval of
digital technical product documentation such as 3D, CAD and
PDM data Part 014: Reference process description ''Retrieval''
TC AECMA
EN 9300-015:2013 ( Ed. 1 )
Aerospace series LOTAR - LOng Term Archiving and Retrieval of
digital technical product documentation such as 3D, CAD and
PDM data Part 015: Reference process description ''Removal''
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 19 15 março 2013

Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
2.2 CENELEC
Normas Europeias aprovadas na área eletrotécnica pelo Comité Europeu de Normalização
Eletrotécnica (CENELEC)
Para cada referência, menciona-se o Comité Técnico, a designação codificada e o título.
SR 23
EN 61535:2009 /A 1:2013 ( Ed. 1 )
Installation couplers intended for permanent connection in fixed
installations
(IEC 61535:2009/A1:2012)
SR 34A
EN 61195:1999 /A 1:2013 ( Ed. 2 )
Double-capped fluorescent lamps - Safety specifications
(IEC 61195:1999/A1:2012)
SR 34A
EN 61199:2011 /A 1:2013 ( Ed. 3 )
Single-capped fluorescent lamps - Safety specifications
(IEC 61199:2011/A1:2012)
SR 34A
EN 62031:2008 /A 1:2013 ( Ed. 1 )
LED modules for general lighting - Safety specifications
(IEC 62031:2008/A1:2012)
SR 68
EN 60404-11:2013 ( Ed. 1 )
Magnetic materials Part 11:Method of test for the determination of
surface insulation resistance of magnetic sheet and strip
(IEC 60404-11:1991 + A1:1998 + A2:2012)
SR 103
EN 62553:2013 ( Ed. 1 )
Methods of measurement for digital network - Performance
characteristics of terrestrial digital multimedia transmission network
(IEC 62553:2012)
SR 110
EN 62595-2:2013 ( Ed. 1 )
LED backlight unit Part 2:Electro-optical measurement methods of
LED backlight unit
(IEC 62595-2:2012)
TC 40XB
EN 61936-1:2010 /CORRIGENDUM /AC/Fev:2013 ( Ed. 1 )
Power installations exceeding 1 kV a.c Part 1:Common rules
(IEC 61936-1:2010, modif)
TC 44X
EN 62061:2005 /A 1:2013 ( Ed. 1 )
Safety of machinery - Functional safety of safety-related electrical,
electronic and programmable electronic control systems
(IEC 62061:2005/A1:2012)
TC 45AX
EN 61513:2013 ( Ed. 1 )
Nuclear power plants - Instrumentation and control important to
safety - General requirements for systems
(IEC 61513:2011)
TC 45AX
EN 61772:2013 ( Ed. 1 )
Nuclear power plants - Control rooms - Application of visual
display units (VDUs)
(IEC 61772:2009)
TC 59X
EN 61121:2013 ( Ed. 4 )
Tumble dryers for household use - Methods for measuring the
performance
(IEC 61121:2012, modif)
TC 61
EN 60335-2-7:2010 /A 1:2013 ( Ed. 5 )
Household and similar electrical appliances - Safety Part
2-7:Particular requirements for washing machines
(IEC 60335-2-7:2008/A1:2011, modif)
TC 61
EN 60335-2-17:2013 ( Ed. 3 )
Household and similar electrical appliances - Safety Part
2-17:Particular requirements for blankets, pads clothong and similar
flexible heating appliances
(IEC 60335-2-17:2012)
TC 62
EN 61674:2013 ( Ed. 2 )
Medical electrical equipment - Dosimeters with ionization chambers
and/or semi-conductor detectors as used in X-ray diagnostic
imaging
(IEC 61674:2012)
TC 65X
EN 61499-1:2013 ( Ed. 2 )
Function blocks Part 1:Architecture
(IEC 61499-1:2012)
TC 65X
EN 61499-2:2013 ( Ed. 2 )
Function blocks Part 2:Software tool requirements
(IEC 61499-2:2012)
TC 86BXA
EN 61300-2-11:2013 ( Ed. 2 )
Fibre optic interconnecting devices and passive components - Basic
test and measurement procedures Part 2-11:Tests - Axial
compression
(IEC 61300-2-11:2012)
TC 86BXA
EN 61300-2-14:2013 ( Ed. 3 )
Fibre optic interconnecting devices and passive components - Basic
test and measurement procedures Part 2-14:Tests - Optical power
(IEC 61300-2-14:2012)
TC 86BXA
EN 61300-2-19:2013 ( Ed. 3 )
Fibre optic interconnecting devices and passive components - Basic
test and measurement procedures Part 2-19:Tests - Damp heat
(steady state)
(IEC 61300-2-19:2012)
TC 86BXA
EN 61753-022-2:2013 ( Ed. 2 )
Fibre optic interconnecting devices and passive components -
Performance standard Part 022-2:Fibre optic connectors terminated
on multimode fibre for category C - Controlled environment
(IEC 61753-022-2:2012)
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 20 15 março 2013

DOCUMENTOS
normativos
TC 86BXA
EN 61753-056-2:2013 ( Ed. 1 )
Fibre optic interconnecting devices and passive components -
Performance standard Part 056-2:Single mode fibre pigtailed style
optical fuse for category C - Controlled environment
(IEC 61753-056-2:2012)
TC 86BXA
EN 61753-143-2:2013 ( Ed. 1 )
Fibre optic interconnecting devices and passive components -
Performance standard Part 143-2:Optical passive VIPA-based
dispersion compensator of single-mode fibre transmission for
category C- Controlled environments
(IEC 61753-143-2:2012)
TC 209
EN 60728-13-1:2012 /CORRIGENDUM /AC/Jan:2013 ( Ed. 1 )
Cable networks for television signals, sound signals and
interactive services Part 13-1:Bandwidth expansion for broadcast
signal over FTTH system
(IEC 60728-13-1:2012)
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 21 15 março 2013

Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
2.3 CEN/CENELEC
Normas Europeias aprovadas pelo Comité Europeu de Normalização (CEN) / Comité Europeu de
Normalização Eletrotécnica (CENELEC)
Para cada referência, menciona-se a designação codificada e o título.
EN 16325:2013 ( Ed. 1 )
Guarantees of Origin related to energy - Guarantees of Origin for
Electricity
TC CSF99
GUIDE 23:2013 ( Ed. 1 )
Consortium bridge - A doption of third-aprt specifications as
European Standardization Publications
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 22 15 março 2013

Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
2.4 ETSI
Normas Europeias aprovadas e publicadas no setor das Telecomunicações pelo Instituto Europeu
de Normalização para as Telecomunicações (ETSI)
Para cada referência, menciona-se a designação codificada e o título.
TC ETSI
EN 319401:2013 ( V1.1.1 )
Electronic Signatures and Infrastructures (ESI); General Policy
Requirements for Trust Service Providers supporting Electronic
Signatures
TC ETSI
EN 319411-2:2013 ( V1.1.1 )
Electronic Signatures and Infrastructures (ESI); Policy and security
requirements for Trust Service Providers issuing certificates Part
2:Policy requirements for certification authorities issuing qualified
certificates
TC ETSI
EN 319411-3:2013 ( V1.1.1 )
Electronic Signatures and Infrastructures (ESI); Policy and security
requirements for Trust Service Providers issuing certificates Part
3:Policy requirements for Certification Authorities issuing public key
certificates
TC ETSI
EN 319412-5:2013 ( V1.1.1 )
Electronic Signatures and Infrastructures (ESI); Profiles for Trust
Service Providers issuing certificates Part 5:Extension for Qualified
Certificate profile
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 23 15 março 2013

Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
3. Normas Internacionais publicadas
Normas Internacionais aprovadas e publicadas pela Comissão Eletrotécnica Internacional (IEC) e
pela Organização Internacional de Normalização (ISO)
Para cada referência, menciona-se o Comité Técnico, a designação codificada, a data e o título.
IEC
TC 17B
IEC 60947-2:2006 /A 2:2013 ( Ed 4.0 )
Low-voltage switchgear and controlgear Part 2:Circuit-breakers
TC 17C
IEC 62271-207:2012 /CORRIGENDUM Jan:2013 ( Ed 2.0
High-voltage switchgear and controlgear Part 207:Seismic
qualification for gas-insulated switchgear assemblies for rated
voltages above 52 kV
TC 22H
IEC 62040-1:2008 /A 1:2013 ( Ed 1.0 )
Uninterruptible power systems (UPS) Part 1: General and safety
requirements for UPS
TC 23E
IEC 60934:2000 /A 2:2013 ( Ed 3.0 )
Circuit-breakers for equipment (CBE)
TC 32B
IEC 60269-3:2010 /A 1:2013 ( Ed 4.0 )
Low-voltage fuses Part 3:Supplementary requirements for fuses for
use by unskilled persons (fuses mainly for household or similar
applications) - Examples of standardized systems of fuses A to F
TC 46F
IEC 61169-26:2013 ( Ed 1.0 )
Radio-frequency connectors Part 26:Sectional specification for
TNCA series RF coaxial connector
TC 46F
IEC 61169-42:2013 ( Ed 1.0 )
Radio-frequency connectors Part 42:Sectional specification for CQN
series quick lock RF coaxial connectors
TC 62C
IEC 60601-2-11:2013 ( Ed 3.0 )
Medical electrical equipment Part 2-11:Particular requirements for
basic safety and essential performance of gamma beam therapy
equipment
TC 65B
IEC 61499-4:2013 ( Ed 2.0 )
Function blocks Part 4:Rules for compliance profiles
TC 86A
IEC 60793-1-42:2013 ( Ed 3.0 )
Optical fibres Part 1-42:Measurement methods and test procedures
- Chromatic dispersion
TC 86C
IEC/TR 61282-10:2013 ( Ed 1.0 )
Fibre optic communication system design guides Part
10:Characterization of the quality of optical vector-modulated
signals with the error vector magnitude
TC CISPR/I
IEC/PAS 62825:2013 ( Ed 1.0 )
Methods of measurement and limits for radiated disturbances from
plasma display panel TVs in the frequency range 150 kHz to 30
MHz
TC 10
IEC 60422:2013 ( Ed 4.0 )
Mineral insulating oils in electrical equipment - Supervision and
maintenance guidance
TC 26
IEC 60974-2:2013 ( Ed 3.0 )
Arc welding equipment Part 2:Liquid coolings systems
TC 26
IEC 60974-7:2013 ( Ed 3.0 )
Arc welding equipment Part 7:Torches
TC 29
IEC/TR 62809:2013 ( Ed 1.0 )
Summary of requirements and tests to products in the scope of IEC
60601-2-66
TC 44
IEC 61496-2:2013 ( Ed 3.0 )
Safety of machinery - Electro-sensitive protective equipment Part
2:Particular requirements for equipment using active
opto-electronic protective devices (AOPDs)
TC 46
IEC 62037-5:2013 ( Ed 1.0 )
Passive r.f. and microwave devices, intermodulation level
measurement Part 5:Measurement of passive intermodulation in
filters
TC 46
IEC 62037-6:2013 ( Ed 1.0 )
Passive r.f. and microwave devices, intermodulation level
measurement Part 6:Measurement of passive intermodulation in
antennas
TC 55
IEC 60317-49:2012 /CORRIGENDUM Jan:2013
Specifications for particular types of winding wires Part
49:Glass-fibre wound high temperature resin or varnish
impregnated, bare or enamelled round copper wire, temperature
index 180
TC 56
IEC 61124:2012 /CORRIGENDUM Jan:2013 ( Ed 3.0 )
Reliability testing - Compliance tests for constant failure rate and
constant failure intensity
TC 57
IEC 61850-5:2013 ( Ed 2.0 )
Communication networks and systems for power utility automation
Part 5:Communication requirements for functions and device
models
TC 57
IEC 62843:2013 ( Ed 1.0 )
Standard for N times 64 kilobit per second optical fiber interfaces
between teleprotection and multiplexer equipment
TC 59
IEC 60704-2-14:2013 ( Ed 2.0 )
Household and similar electrical appliances - Test code for the
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 24 15 março 2013

DOCUMENTOS
normativos
determination of airborne acoustical noise Part 2-14:Particular
requirements for refrigerators, frozen-food storage cabinets and food
freezers
TC 87
IEC 61157:2007 /A 1:2013 ( Ed 20 )
Standard means for the reporting of the acoustic output of medical
diagnostic ultrasonic equipment
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
TC 87
IEC 61161:2013 ( Ed 3.0 )
Ultrasonics - Power measurement - Radiation force balances and
performance requirements
TC 90
IEC 61788-16:2013 ( Ed 1.0 )
Superconductivity Part 16:Electronic characteristic measurements -
Power-dependent surface resistance of superconductors at
microwave frequencies
TC 90
IEC 61788-17:2013 ( Ed 1.0 )
Superconductivity Part 17:Electronic characteristic measurements-
Local critical current density and its distribution in large-area
superconducting films
TC 91
IEC 61193-3:2013 ( Ed 1.0 )
Quality assessment systems Part 3:Selection and use of sampling
plans forprinted board and laminate end-product and in-process
auditing
TC 100
IEC 62731:2013 ( Ed 1.0 )
Text-to-speech for television - General requirements
TC 115
IEC/TS 62344:2013 ( Ed 1.0 )
Hydroelectric power plants - Communication for monitoring and
control
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 25 15 março 2013

Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
ISO
TC 34
ISO 21572:2013 ( Ed 2 )
Foodstuffs Molecular biomarker analysis Protein-based methods
TC 58
ISO 21007-2:2013 ( Ed 2 )
Gas cylinders Identification and marking using radio frequency
identification technology Part 2: Numbering schemes for radio
frequency identification
TC 61
ISO 472:2013 ( Ed 4 )
Plastics Vocabulary
TC 106
ISO 10323:2013 ( Ed 2 )
Dentistry Bore diameters for rotary instruments such as discs and
wheels
TC 106
ISO 13078:2013 ( Ed 1 )
Dentistry Dental furnace Test method for temperature measurement
with separate thermocouple
TC 159
ISO 9241-154:2013 ( Ed 1 )
Ergonomics of human-system interaction Part 154: Interactive voice
response (IVR) applications
TC 188
ISO 16147:2002 /A 1:2013 ( Ed 1 )
Small craft Inboard diesel engines Engine-mounted fuel and
electrical components
AMENDMENT 1
TC 213
ISO 16610-85:2013 ( Ed 1 )
Geometrical product specifications (GPS) Filtration Part 85:
Morphological areal filters: Segmentation
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 26 15 março 2013

Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
4. Projetos de normas portuguesas
Os projetos de normas estão organizadas por Grupos classificativos, indicando-se a referência e o
respetivo título.
4.1 Projetos em inquérito público
Para cada referência menciona-se a designação codificada, o título e a correspondência
europeia ou internacional, quando exista, e a data limite para a apresentação de comentários.
C140 / CT 14
prNP 4515:2013
Preço: 0,00 EUR
Casca e estilha de madeira de Resinosas Tratamento
fitossanitário pelo calor para eliminação do nemátode da
madeira do pinheiro (Bursaphelenchus xylophilus) e outros
organismos prejudiciais
Data de Início do Inquerito: 2013-03-16
Data de Fim do Inquerito: 2013-04-15
C1480 / CT 148
prNP 4514:2013
Preço: 0,00 EUR
Transporte público de passageiros Linha de autocarros
interurbanos Características e fornecimento do serviço
Data de Início do Inquerito: 2013-03-16
Data de Fim do Inquerito: 2013-04-15
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 27 15 março 2013

Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
4.2 Projetos anulados
Para cada referência menciona-se a designação, a correspondência europeia e/ou
internacional, bem como o documento que o substitui, quando exista.
LISTA VAZIA
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 28 15 março 2013

Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
5. Projetos de normas e propostas de estudo de novas normas do Comité Europeu
de Normalização(CEN e do Comité Europeu para a Normalização
do Ferro e do Aço (ECISS)
Os projetos de normas e as propostas de estudo de novas normas estão organizadas por "Comités"
Técnicos do CEN e do ECISS.
5.1 Projetos em inquérito público
Para cada referência menciona-se a designação codificada, o título e a data limite para a
apresentação de comentários.
TC 392
prEN 16344:2013
Cosmetics Analysis of cosmetic products Screening for
UV-filters in cosmetic products and quantitative
determination of 10 UV-filters by HPLC
Data Limite: 2013-04-28
TC 12
prCEN ISO/TR 19905-2:2013
Petroleum and natural gas industries Site-specific
assessment of mobile offshore units Part 2: Jack-ups
commentary and detailed sample calculation
(ISO/DTR 19905-2:2013)
Data Limite: 2013-04-10
TC 12
prEN ISO 13354:2013
Petroleum and natural gas industries Shallow gas
diverter equipment
(ISO/DIS 13354:2013)
Data Limite: 2013-07-07
TC 19
prCEN/TR 16557:2013
Automotive fuels High FAME (B11 - B30) diesel fuel
blends Background to the parameters required and their
respective limits and determination
Data Limite: 2013-05-14
TC 19
prCEN/TR 16569:2013
Automotive fuels Assessing the effects of E10 petrol on
vehicle emissions and performance
Data Limite: 2013-04-17
TC 19
prEN 14078:2013
Liquid petroleum products Determination of fatty methyl
ester (FAME) content in middle distillates Infrared
spectrometry method
Data Limite: 2013-06-10
TC 19
prEN 15376:2013
Automotive fuels Ethanol as a blending component for
petrol Requirements and test methods
Data Limite: 2013-07-14
TC 19
prEN 15751:2012
Automotive fuels - Fatty acid methyl ester (FAME) fuel
and blends with diesel fuel Determination of oxidation
stability by accelerated oxidation method
Data Limite: 2013-04-15
TC 19
prEN 16568:2013
Automotive fuels Fatty acid methyl ester (FAME) fuel and
blends with diesel fuel Determination of oxidation
stability by rapidly accelerated oxidation method at 120°C
Data Limite: 2013-07-28
TC 19
EN ISO 4264:2007 /prA 1:2013
Petroleum products Calculation of cetane index of
middle-distillate fuels by the four-variable equation
(ISO 4264:2007/FDAM 1:2013)
Data Limite: 2013-03-10
TC 19
prEN ISO 8311:2012
Refrigerated hydrocarbon and non-petroleum based
liquefied gaseous fuels Calibration of membrane tanks
and independent prismatic tanks in ships Manual and
internal electro-optical distance-ranging methods
(ISO/DIS 8311:2012)
Data Limite: 2013-03-18
TC 19
prEN ISO 10370:2012
Petroleum products Determination of carbon residue
Micro method
(ISO/DIS 10370:2012)
Data Limite: 2013-03-18
TC 23
prEN 16509:2012
Transportable gas cylinders Non-refillable, small
transportable, steel cylinders of capacities up to and
including 120 ml containing compressed or liquefied
gases (compact cylinders) Design, construction, filling
and testing
Data Limite: 2013-04-29
TC 23
prEN ISO 11439:2013
Gas cylinders High pressure cylinders for the on-board
storage of natural gas as a fuel for automotive vehicles
(ISO/FDIS 11439:2013)
Data Limite: 2013-03-17
TC 23
prEN ISO 11623:2012
Gas cylinders Composite construction Periodic inspection
and testing
(ISO/DIS 11623:2012)
Data Limite: 2013-03-11
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 29 15 março 2013

DOCUMENTOS
normativos
TC 23
EN ISO 15245-1:2001 /prA 1:2013
Gas cylinders Parallel threads for connection of valves to
gas cylinders Part 1: Specification
(ISO 15245-1:2001/FDAM 1:2013)
Data Limite: 2013-04-07
TC 33
prEN 13115:2012
Windows Classification of mechanical properties
Racking, torsion, and operating forces
Data Limite: 2013-04-15
TC 51
prEN 196-2:2012
Method of testing cement Part 2: Chemical analysis of
cement
Data Limite: 2013-03-04
TC 52
prEN 71-3:2013
Safety of toys Part 3: Migration of certain elements
Data Limite: 2013-04-28
TC 52
prEN 71-5:2013
Safety of toys Part 5: Chemical toys (sets) other than
experimental sets
Data Limite: 2013-04-28
TC 52
prEN 71-7:2012
Safety of toys Part 7: Finger paints Requirements and
test methods
Data Limite: 2013-03-25
TC 52
prEN 71-12:2013
Safety of toys Part 12: N-Nitrosamines and
N-nitrosatable substances
Data Limite: 2013-04-28
TC 53
prEN 1263-1:2012
Safety nets Part 1: Safety requirements, test methods
Data Limite: 2013-05-06
TC 53
prEN 1263-2:2012
Safety nets Part 2: Safety requirements for the positioning
limits
Data Limite: 2013-05-06
TC 53
prEN 16508:2012
Temporary works equipment Encapsulation constructions
Performance requirements and general design
Data Limite: 2013-04-29
TC 54
prEN 764-4:2012
Pressure equipment Part 4: Establishment of technical
delivery conditions for metallic materials
Data Limite: 2013-05-13
TC 54
prEN 764-5:2012
Pressure equipment Part 5: Inspection documentation of
metallic materials and compliance with the material
specification
Data Limite: 2013-05-13
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
TC 55
prEN ISO 3630-2:2013
Dentistry Endodontic instruments Part 2: Enlargers
(ISO/FDIS 3630-2:2013)
Data Limite: 2013-03-10
TC 55
EN ISO 7405:2008 /prA 1:2013
Dentistry Evaluation of biocompatibility of medical
devices used in dentistry Amendment 1: Positive control
material
(ISO 7405:2008/FDAM 1:2013)
Data Limite: 2013-04-14
TC 55
prEN ISO 9173-3:2013
Dentistry Extraction forceps Part 3: Design and
dimensions (
ISO/DIS 9173-3:2013)
Data Limite: 2013-07-14
TC 55
prEN ISO 16635-2:2012
Dentistry Dental rubber dam technique Part 2: Clamp
forceps
(ISO/DIS 16635-2:2012)
Data Limite: 2013-05-13
TC 55
prEN ISO 24234:2013
Dentistry Dental amalgam
(ISO/DIS 24234:2013)
Data Limite: 2013-06-17
TC 55
prEN ISO 29022:2013
Dentistry Adhesion Notched-edge shear bond strength
test
(ISO/FDIS 29022:2013)
Data Limite: 2013-03-10
TC 58
EN 125:2010 /prA 1:2013
Flame supervision devices for gas burning appliances
Thermoelectric flame supervision devices
Data Limite: 2013-07-21
TC 58
prEN 13611:2012
Safety and control devices for burners and appliances
burning gaseous and/or liquid fuels General
Requirements
Data Limite: 2013-04-08
TC 62
prEN 13278:2013
Open fronted gas-fired independent space heaters
Data Limite: 2013-07-07
TC 69
prEN 1983:2013
Industrial valves Steel ball valves
Data Limite: 2013-06-24
TC 69
prEN 13547:2013
Industrial valves Copper alloy ball valves
Data Limite: 2013-07-28
TC 69
prEN 14141:2013
Valves for natural gas transportation in pipelines
Performance requirements and tests
Data Limite: 2013-03-17
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 30 15 março 2013

DOCUMENTOS
normativos
TC 69
prEN ISO 4126-6:2013
Safety devices for protection against excessive pressure
Part 6: Application, selection and installation of bursting
disc safety devices
(ISO/DIS 4126-6:2013)
Data Limite: 2013-07-14
TC 69
prEN ISO 4126-7:2013
Safety devices for protection against excessive pressure
Part 7: Common data
(ISO/FDIS 4126-7:2013)
Data Limite: 2013-03-24
TC 74
prEN 1514-2:2013
Flanges and their joints Gaskets for PN-designated
flanges Part 2: Spiral wound gaskets for use with steel
flanges
Data Limite: 2013-06-10
TC 79
prEN 14143:2013
Respiratory equipment Self-contained re-breathing
diving apparatus
Data Limite: 2013-03-31
TC 88
prEN 14063-2:2012
Thermal insulation products for buildings In-situ formed
expanded clay lightweight aggregate products Part 2:
Specification for the installed products
Data Limite: 2013-04-22
TC 88
prEN 15101-1:2013
Thermal insulation products for buildings In-situ formed
loose fill cellulose (LFCI) products Part 1: Specification
for the products before installation
Data Limite: 2013-07-07
TC 88
prEN 15101-2:2013
Thermal insulation products for buildings In-situ formed
loose fill cellulose (LFCI) products Part 2: Specification
for the installed products
Data Limite: 2013-07-07
TC 88
prEN 16491:2012
Thermal insulation products for buildings Factory made
composite products Specification
Data Limite: 2013-03-11
TC 89
prEN ISO 6781-3:2013
Performance of buildings Detection of heat, air and
moisture irregularities in buildings by infrared methods
Part 3: Qualifications of Equipment Operators, Data
Analysts and Report Writers
(ISO/DIS 6781-3:2013)
Data Limite: 2013-07-14
TC 89
EN ISO 12570:2000 /prA 1:2013
Hygrothermal performance of building materials and
products Determination of moisture content by drying
at elevated temperature - Amendment 1
(ISO 12570:2000/FDAM 1:2013)
Data Limite: 2013-04-21
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
TC 92
prEN 14154-4:2013
Water meters Part 4: Additional functionalities
Data Limite: 2013-07-21
TC 93
prEN 131-7:2013
Ladders Part 7: Mobile ladders with platform
Data Limite: 2013-04-14
TC 102
prEN 1422:2012
Sterilizers for medical purposes Ethylene oxide
sterilizers Requirements and test methods
Data Limite: 2013-04-20
TC 104
prCEN/TR 16563:2013
Principles of the equivalent durability procedure
Data Limite: 2013-05-21
TC 104
prEN 16502:2012
Test method for the determination of the degree of soil
acidity according to Baumann-Gully
Data Limite: 2013-04-22
TC 110
prEN 327:2012
Heat exchangers Forced convection air cooled
refrigerant condensers Test procedures for establishing
performance
Data Limite: 2013-03-11
TC 110
prEN 328:2012
Heat exchangers Forced convection unit air coolers for
refrigeration Test procedures for establishing the
performance
Data Limite: 2013-03-11
TC 110
prEN 1048:2012
Heat exchangers Air cooled liquid coolers ('dry coolers')
Test procedures for establishing performance
Data Limite: 2013-03-11
TC 112
prCEN/TS 16526:2013
Wood-based panels Determination of performance
characteristics for specification of sandwich boards for
furniture
Data Limite: 2013-05-14
TC 112
prEN 12871:2013
Wood-based panels Determination of performance
characteristics for load bearing panels for use in floors,
roofs and walls
Data Limite: 2013-03-31
TC 113
prEN 12102:2012
Air conditioners, liquid chilling packages, heat pumps
and dehumidifiers with electrically driven compressors
for space heating and cooling Measurement of airborne
noise Determination of the sound power level
Data Limite: 2013-04-29
TC 113
prEN 12900:2013
Rating conditions, tolerances and presentation of
manufacturer's performance data
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 31 15 março 2013

DOCUMENTOS
normativos
Data Limite: 2013-05-07
TC 113
prEN 14511-1:2012
Air conditioners, liquid chilling packages and heat pumps
with electrically driven compressors for space heating
and cooling Part 1: Terms and definitions
Data Limite: 2013-04-29
TC 113
prEN 14511-2:2012
Air conditioners, liquid chilling packages and heat pumps
with electrically driven compressors for space heating
and cooling Part 2: Test conditions
Data Limite: 2013-04-29
TC 113
prEN 14511-3:2012
Air conditioners, liquid chilling packages and heat pumps
with electrically driven compressors for space heating
and cooling Part 3: Test methods
Data Limite: 2013-05-06
TC 113
prEN 14511-4:2012
Air conditioners, liquid chilling packages and heat
pumps with electrically driven compressors for space
heating and cooling Part 4: Requirements
Data Limite: 2013-04-29
TC 113
prEN 14825:2013
Air conditioners, liquid chilling packages and heat
pumps, with electrically driven compressors, for space
heating and cooling Testing and rating at part load
conditions and calculation of seasonal performance
Data Limite: 2013-06-17
TC 113
prEN 15218:2012
Air conditioners and liquid chilling packages with
evaporatively cooled condenser and with electrically
driven compressors for space cooling Terms, definitions,
test conditions, test methods and requirements
Data Limite: 2013-04-29
TC 121
prEN ISO 669:2013
Resistance welding Resistance welding equipment
Mechanical and electrical requirements
(ISO/DIS 669:2013)
Data Limite: 2013-06-10
TC 121
prEN ISO 6520-2:2012
Welding and allied processes Classification of geometric
imperfections in metallic materials Part 2: Welding with
pressure
(ISO/FDIS 6520-2:2012)
Data Limite: 2013-03-01
TC 121
prEN ISO 6847:2012
Welding consumables Deposition of a weld metal pad for
chemical analysis
(ISO/FDIS 6847:2012)
Data Limite: 2013-03-20
TC 121
prEN ISO 9017:2013
Destructive tests on welds in metallic materials Fracture
test
(ISO 9017:2001)
Data Limite: 2013-07-07
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
TC 121
prEN ISO 9312:2013
Resistance welding equipment Insulated pins for use in
electrode back-ups
(ISO/FDIS 9312:2013)
Data Limite: 2013-05-07
TC 121
prEN ISO 9455-5:2012
Soft soldering fluxes Test methods Part 5: Copper mirror
test
(ISO/DIS 9455-5:2012)
Data Limite: 2013-05-20
TC 121
prEN ISO 9606-1:2013
Qualification testing of welders Fusion welding Part 1:
Steels
(ISO 9606-1:2012 including Cor 1:2012)
Data Limite: 2013-07-07
TC 121
prEN ISO 9692-1:2013
Welding and allied processes Types of joint preparation
Part 1: Manual metal-arc welding, gas-shielded
metal-arc welding, gas welding, TIG welding and beam
welding of steels
(ISO/FDIS 9692-1:2013)
Data Limite: 2013-05-07
TC 121
prEN ISO 10447:2013
Resistance welding Peel and chisel testing of resistance
spot and projection welds
(ISO/DIS 10447:2013)
Data Limite: 2013-06-17
TC 121
prEN ISO 10675-1:2013
Non-destructive testing of welds Acceptance levels for
radiographic testing Part 1: Steel, nickel, titanium and
their alloys
(ISO 10675-1:2008)
Data Limite: 2013-07-07
TC 121
prEN ISO 10675-2:2013
Non-destructive testing of welds Acceptance levels for
radiographic testing Part 2: Aluminium and its alloys
(ISO 10675-2:2010)
Data Limite: 2013-07-07
TC 121
prEN ISO 14114:2012
Gas welding equipment Acetylene manifold systems for
welding, cutting and allied processes General
requirements
(ISO/DIS 14114:2012)
Data Limite: 2013-03-11
TC 121
prEN ISO 14272:2013
Specimen dimensions and procedure for cross tension
testing resistance spot and embossed projection welds
(ISO/DIS 14272:2013)
Data Limite: 2013-06-17
TC 121
prEN ISO 14273:2013
Specimen dimensions and procedure for shear testing
resistance spot, seam and embossed projection welds
(ISO/DIS 14273:2013)
Data Limite: 2013-06-17
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 32 15 março 2013

DOCUMENTOS
normativos
TC 121
prEN ISO 14323:2013
Resistance spot welding and projection welds Destructive
testing of welds Specimen dimensions and procedure for
impact shear test and cross-tension testing
(ISO/DIS 14323:2013)
Data Limite: 2013-06-17
TC 121
prEN ISO 14373:2013
Resistance welding - Procedure for spot welding of
uncoated and coated low carbon steels
(ISO/DIS 14373:2013)
Data Limite: 2013-06-17
TC 121
prEN ISO 15626:2013
Non-destructive testing of welds Time-of-flight
diffraction technique (TOFD) Acceptance levels
(ISO 15626:2011)
Data Limite: 2013-07-07
TC 121
prEN ISO 17639:2013
Destructive tests on welds in metallic materials
Macroscopic and microscopic examination of welds
(ISO 17639:2003)
Data Limite: 2013-07-07
TC 121
prEN ISO 23277:2013
Non-destructive testing of welds Penetrant testing of
welds Acceptance levels
(ISO/DIS 23277:2013)
Data Limite: 2013-06-24
TC 121
prEN ISO 23278:2013
Non-destructive testing of welds Magnetic particle
testing of welds Acceptance levels
(ISO/DIS 23278:2013)
Data Limite: 2013-06-24
TC 121
prEN ISO 25980:2012
Health and safety in welding and allied processes
Transparent welding curtains, strips and screens for arc
welding processes
(ISO/DIS 25980:2012)
Data Limite: 2013-04-08
TC 122
CEN ISO/TR 7250-2:2011 /prA 1:2012
Basic human body measurements for technological design
Part 2: Statistical summaries of body measurements from
national populations
(ISO/TR 7250-2:2010/FAmd 1:2012)
Data Limite: 2013-03-06
TC 122
prEN ISO 9241-391:2012
Ergonomics of Human System Interaction Part 391:
Requirements, analysis and compliance test methods for
the reduction of photosensitive seizures
(ISO/DIS 9241-391:2012)
Data Limite: 2013-05-06
TC 124
prEN 14080:2013
Timber structures Glued laminated timber and glued
solid timber Requirements
Data Limite: 2013-03-31
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
TC 126
prEN 16205:2013
Laboratory measurement of walking noise on floors
Data Limite: 2013-03-31
TC 126
EN ISO 10140-1:2010 /prA 2:2012
Acoustics Laboratory measurement of sound insulation of
building elements Part 1: Application rules for specific
products - Rainfall noise
(ISO 10140-1:2010/DAM 2:2012)
Data Limite: 2013-04-08
TC 126
EN ISO 10140-5:2010 /prA 1:2012
Acoustics Laboratory measurement of sound insulation of
building elements Part 5: Requirements for test facilities
and equipment - Rainfall noise
(ISO 10140-5:2010/DAM 1:2012)
Data Limite: 2013-04-08
TC 127
prCEN/TS 16459:2012
External fire exposure of roofs and roof coverings
Extended application of test results from CEN/TS 1187
Data Limite: 2013-03-13
TC 127
prEN 1365-2:2012
Fire resistance tests for loadbearing elements Part 2:
Floors and roofs
Data Limite: 2013-04-29
TC 128
prEN 1304:2012
Clay roofing tiles and fittings Product definitions and
specifications
Data Limite: 2013-03-04
TC 128
prEN 14509:2013
Self-supporting double skin metal faced insulating
panels Factory made products Specifications
Data Limite: 2013-06-17
TC 129
prEN 15682-1:2012
Glass in building Heat soaked thermally toughened alkaline
earth silicate safety glass Part 1: Definition and
description
Data Limite: 2013-04-29
TC 129
prEN 15682-2:2012
Glass in building Heat soaked thermally toughened
alkaline earth silicate safety glass Part 2: Evaluation of
conformity/Product standard
Data Limite: 2013-04-29
TC 129
prEN 15683-1:2012
Glass in building Thermally toughened soda lime silicate
channel shaped safety glass Part 1: Definition and
description
Data Limite: 2013-04-29
TC 129
prEN 15683-2:2012
Glass in building Thermally toughened soda lime silicate
channel shaped safety glass Part 2: Evaluation of
conformity/Product standard
Data Limite: 2013-04-29
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 33 15 março 2013

DOCUMENTOS
normativos
TC 130
prEN 14037-2:2013
Free hanging heating and cooling surfaces for water with
a temperature below 120 °C Part 2: Test method for
thermal output of ceiling mounted radiant panels
Data Limite: 2013-04-28
TC 130
prEN 14037-3:2013
Free hanging heating and cooling surfaces for water with
a temperature below 120 °C Part 3: Rating method and
evaluation of radiant thermal output of ceiling mounted
radiant panels
Data Limite: 2013-04-28
TC 130
prEN 14037-4:2013
Free hanging heating and cooling surfaces for water with
a temperature below 120 °C Part 4: Test method for
cooling capacity of ceiling mounted radiant panels
Data Limite: 2013-04-28
TC 130
prEN 14037-5:2013
Free hanging heating and cooling surfaces for water with
a temperature below 120 °C Part 5: Test method for
thermal output of open or closed heated ceiling surfaces
Data Limite: 2013-04-28
TC 130
prEN 16313:2013
Connections for heating and cooling appliances
Detachable connection with outside threaded pipe G 3/4
A and inside cone
Data Limite: 2013-03-10
TC 132
prEN 485-2:2013
Aluminium and aluminium alloys Sheet, strip and plate
Part 2: Mechanical properties
Data Limite: 2013-07-21
TC 132
prEN 573-3:2013
Aluminium and aluminium alloys Chemical composition
and form of wrought products Part 3: Chemical
composition and form of products
Data Limite: 2013-07-14
TC 132
prEN 754-2:2013
Aluminium and aluminium alloys Cold drawn rod/bar and
tube Part 2: Mechanical properties
Data Limite: 2013-07-21
TC 132
prEN 755-2:2013
Aluminium and aluminium alloys Extruded rod/bar, tube
and profiles Part 2: Mechanical properties
Data Limite: 2013-07-21
TC 132
prEN 13195:2013
Aluminium and aluminium alloys Specifications for
wrought and cast products for marine applications
(shipbuilding, marine and offshore)
Data Limite: 2013-07-21
TC 133
prEN 13600:2013
Copper and copper alloys Seamless copper tubes for
electrical purposes
Data Limite: 2013-03-24
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
TC 133
prEN 13601:2013
Copper and copper alloys Copper rod, bar and wire for
general electrical purposes
Data Limite: 2013-03-24
TC 133
prEN 13602:2013
Copper and copper alloys Drawn, round copper wire for
the manufacture of electrical conductors
Data Limite: 2013-03-24
TC 133
prEN 13603:2013
Copper and copper alloys Test methods for assessing
protective tin coatings on drawn round copper wire for
electrical purposes
Data Limite: 2013-03-24
TC 133
prEN 13604:2013
Copper and copper alloys Semiconductor devices,
electronic and vacuum products made from high
conductivity copper
Data Limite: 2013-03-24
TC 133
prEN 13605:2013
Copper and copper alloys Copper profiles and profiled
wire for electrical purposes
Data Limite: 2013-03-24
TC 134
prEN 16511:2012
Loose-laid panels Multi-layer semi-rigid floor covering
(MSF) panels with wear resistant top layer
Data Limite: 2013-05-06
TC 134
prEN 16518:2013
Resilient floor coverings Measurement of in-room impact
noise
Data Limite: 2013-06-17
TC 136
prEN 12503-4:2012
Sports mats Part 4: Determination of shock absorption
Data Limite: 2013-03-11
TC 136
EN 13451-3:2011 /prA 1:2012
Swimming pool equipment Part 3: Additional specific
safety requirements and test methods for inlets and
outlets and water/air based water leisure features
Data Limite: 2013-05-13
TC 136
prEN 13451-5:2012
Swimming pool equipment Part 5: Additional specific
safety requirements and test methods for lane lines and
dividing line
Data Limite: 2013-04-22
TC 137
prEN 13205-1:2012
Workplace exposure Assessment of sampler performance
for measurement of airborne particle concentrations Part
1: General requirements
Data Limite: 2013-03-04
TC 137
prEN 13205-2:2012
Workplace exposure Assessment of sampler performance
for measurement of airborne particle concentrations Part
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 34 15 março 2013

DOCUMENTOS
normativos
2: Laboratory performance test based on determination
of sampling efficiency
Data Limite: 2013-03-04
TC 137
prEN 13205-4:2012
Workplace exposure Assessment of sampler performance
for measurement of airborne particle concentrations Part
4: Laboratory performance test based on comparison of
concentrations
Data Limite: 2013-03-04
TC 137
prEN 13205-5:2012
Workplace exposure Assessment of sampler performance
for measurement of airborne particle concentrations Part
5: Aerosol sampler performance test and sampler
comparison carried out at workplaces
Data Limite: 2013-03-04
TC 137
prEN 13205-6:2012
Workplace exposure Assessment of sampler performance
for measurement of airborne particle concentrations Part
6: Transport and handling tests
Data Limite: 2013-03-04
TC 138
prEN ISO 17405:2012
Non-destructive testing Ultrasonic testing Technique of
testing claddings produced by welding, rolling and
explosion
(ISO/DIS 17405:2012)
Data Limite: 2013-03-04
TC 138
prEN ISO 19232-1:2013
Non-destructive testing Image quality of radiographs Part
1: Determination of the image quality of radiographs
using wire-type indicators
(ISO/FDIS 19232-1:2013)
Data Limite: 2013-04-14
TC 138
prEN ISO 19232-2:2013
Non-destructive testing Image quality of radiographs
Part 2: Determination of the image quality value using
step/hole-type image quality indicators (ISO/FDIS
19232-2:2013)
Data Limite: 2013-04-14
TC 138
prEN ISO 19232-3:2013
Non-destructive testing Image quality of radiographs Part
3: Image quality classes
(ISO/FDIS 19232-3:2013)
Data Limite: 2013-04-14
TC 138
prEN ISO 19232-4:2013
Non-destructive testing Image quality of radiographs
Part 4: Experimental evaluation of image quality values
and image quality tables
(ISO/FDIS 19232-4:2013)
Data Limite: 2013-04-14
TC 138
prEN ISO 19232-5:2013
Non-destructive testing Image quality of radiographs
Part 5: Determination of the image unsharpness value
using duplex wire-type image quality indicators
(ISO/FDIS 19232-5:2013)
Data Limite: 2013-04-14
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
TC 139
prEN 927-2:2013
Paints and varnishes Coating materials and coating
systems for exterior wood Part 2: Performance
specification
Data Limite: 2013-06-17
TC 139
prEN 13523-0:2012
Coil coated metals Test methods Part 0: General
introduction and list of test methods
Data Limite: 2013-03-11
TC 139
prEN 13523-2:2012
Coil coated metals Test methods Part 2: Gloss
Data Limite: 2013-03-11
TC 139
prEN 13523-3:2012
Coil coated metals Test methods Part 3: Colour
difference - Instrumental comparison
Data Limite: 2013-03-11
TC 139
prEN 13523-4:2012
Coil coated metals Test methods Part 4: Pencil hardness
Data Limite: 2013-03-11
TC 139
prEN 13523-5:2012
Coil coated metals Test methods Part 5: Resistance to
rapid deformation (impact test)
Data Limite: 2013-03-11
TC 139
prEN 13523-7:2012
Coil coated metals Test methods Part 7: Resistance to
cracking on bending (T-bend test)
Data Limite: 2013-03-11
TC 139
prEN 13523-9:2012
Coil coated metals Test methods Part 9: Resistance to
water immersion
Data Limite: 2013-03-11
TC 139
prEN 13523-13:2012
Coil coated metals Test methods Part 13: Resistance to
accelerated ageing by the use of heat
Data Limite: 2013-03-11
TC 139
prEN 13523-14:2012
Coil coated metals Test methods Part 14: Chalking
(Helmen method)
Data Limite: 2013-03-11
TC 139
prEN 13523-25:2012
Coil coated metals Test methods Part 25: Resistance to
humidity
Data Limite: 2013-03-11
TC 139
prEN 13523-26:2012
Coil coated metals Test methods Part 26: Resistance to
condensation of water
Data Limite: 2013-03-11
TC 139
prEN 16492:2012
Paints and varnishes Evaluation of the surface
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 35 15 março 2013

DOCUMENTOS
normativos
disfigurement caused by fungi and algae on coatings
Data Limite: 2013-03-11
TC 139
prEN 16566:2013
Paints and varnishes Fillers for internal and/or external
works Adaptation of fillers to European standards
Data Limite: 2013-07-14
TC 139
prEN ISO 4618:2012
Paints and varnishes Terms and definitions
(ISO/DIS 4618:2012)
Data Limite: 2013-05-20
TC 139
prEN ISO 11664-3:2012
Colorimetry Part 3: CIE tristimulus values
(ISO 11664-3:2012)
Data Limite: 2013-04-15
TC 140
prEN ISO 15197:2013
In vitro diagnostic test systems Requirements for
blood-glucose monitoring systems for self-testing in
managing diabetes mellitus (ISO/FDIS 15197:2013)
Data Limite: 2013-04-14
TC 142
prEN 1870-6:2012
Safety of woodworking machines Circular sawing
machines Part 6: Circular sawing machines for fire wood
Data Limite: 2013-03-18
TC 144
prEN 16517:2013
Agricultural and forestry machinery Mobile yarders for
timber logging Safety
Data Limite: 2013-06-10
TC 144
prEN ISO 4254-1:2013
Agricultural machinery Safety Part 1: General
requirements
(ISO/FDIS 4254-1:2013)
Data Limite: 2013-03-24
TC 144
prEN ISO 16122-1:2013
Agricultural and forestry machinery Inspection of
sprayers in use Part 1: General
(ISO/DIS 16122-1:2013)
Data Limite: 2013-06-10
TC 144
prEN ISO 16122-2:2013
Agricultural and forestry machinery Inspection of
sprayers in use Part 2: Horizontal boom sprayers
(ISO/DIS 16122-2:2013)
Data Limite: 2013-06-10
TC 144
prEN 16122-3:2013
Agricultural and forestry machinery Inspection of
sprayers in use Part 3: Vertical boom sprayers,
mistblowers and similar
(ISO/DIS 16122-3:2013)
Data Limite: 2013-06-10
TC 144
prEN ISO 19932-1:2013
Equipment for crop protection Knapsack sprayers Part 1:
Safety and environmental requirements
(ISO/FDIS 19932-1:2013)
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
Data Limite: 2013-04-07
TC 144
prEN ISO 19932-2:2013
Equipment for crop protection Knapsack sprayers Part 2:
Test methods
(ISO/FDIS 19932-2:2013)
Data Limite: 2013-04-07
TC 145
prEN 13418:2013
Plastics and rubber machines Winding machines for film
or sheet Safety requirements
Data Limite: 2013-03-10
TC 147
EN 13001-3-1:2012 /prA 1:2013
Cranes General Design Part 3-1: Limit States and proof
competence of steel structure
Data Limite: 2013-04-10
TC 147
prEN 13001-3-3:2012
Cranes General design Part 3-3: Limit states and proof
of competence of wheel/rail contacts
Data Limite: 2013-03-11
TC 150
prEN 12895:2013
Industrial trucks Electromagnetic compatibility
Data Limite: 2013-07-21
TC 151
EN 474-5:2006+A2:2012 /prA 3:2012
Earth-moving machinery Safety Part 5: Requirements for
hydraulic excavators
Data Limite: 2013-04-22
TC 152
prEN 13814:2013
Fairground and amusement park machinery and structure
Safety
Data Limite: 2013-06-24
TC 153
prEN 13732:2012
Food processing machinery Bulk milk coolers on farms
Requirements for performance, safety and hygiene
Data Limite: 2013-05-06
TC 153
prEN 15467:2012
Food processing machinery Fish heading and filleting
machines Safety and hygiene requirements
Data Limite: 2013-05-13
TC 154
prEN 1097-6:2013
Tests for mechanical and physical properties of
aggregates Part 6: Determination of particle density and
water absorption
Data Limite: 2013-04-07
TC 154
prEN 1097-11:2012
Tests for mechanical and physical properties of
aggregates Part 11: Determination of compressibility and
confined compresssive strength of lightweight aggregates
Data Limite: 2013-05-13
TC 154
prEN 13179-1:2012
Tests for filler aggregate used in bituminous mixtures Part
1: Delta ring and ball test
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 36 15 março 2013

DOCUMENTOS
normativos
Data Limite: 2013-04-29
TC 155
prEN ISO 11297-1:2013
Plastics piping systems for renovation of underground
drainage and sewerage networks under pressure Part 1:
General
(ISO/FDIS 11297-1:2013)
Data Limite: 2013-03-17
TC 155
prEN ISO 11297-3:2013
Plastics piping systems for renovation of underground
drainage and sewerage networks under pressure Part 3:
Lining with close-fit pipes
(ISO/FDIS 11297-3:2013)
Data Limite: 2013-03-17
TC 156
prEN 13141-6:2012
Ventilation for buildings Performance testing of
components/products for residential ventilation Part 6:
Exhaust ventilation system packages used in a single
dwelling
Data Limite: 2013-05-13
TC 156
prEN 13141-11:2012
Ventilation for buildings Performance testing of
components/products for residential ventilation Part 11:
Positive pressure ventilation systems
Data Limite: 2013-05-13
TC 160
prEN 353-1:2012
Personal fall protection equipment Guided type fall
arresters including an anchor line Part 1: Guided type fall
arresters including a rigid anchor line
Data Limite: 2013-04-22
TC 162
prEN 469:2013
Protective clothing for firefighters Performance
requirements for protective clothing for firefighting
Data Limite: 2013-05-17
TC 162
prEN 16523-1:2013
Determination of material resistance to permeation by
chemicals Part 1: Permeation by liquid chemical under
conditions of continuous contact
Data Limite: 2013-06-17
TC 162
prEN ISO 13688:2013
Protective clothing General requirements
(ISO/FDIS 13688:2013)
Data Limite: 2013-03-24
TC 165
prEN 124-1:2012
Gully tops and manhole tops for vehicular and pedestrian
areas Part 1: Classification, general design, performance
and testing requirements, test methods and evaluation of
conformity
Data Limite: 2013-04-08
TC 165
prEN 124-2:2012
Gully tops and manhole tops for vehicular and pedestrian
areas Part 2: Gully tops and manhole tops made of cast
iron
Data Limite: 2013-04-08
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
TC 165
prEN 124-3:2012
Gully tops and manhole tops for vehicular and pedestrian
areas Part 3: Gully tops and manhole tops made from
steel or aluminium alloy
Data Limite: 2013-04-08
TC 165
prEN 124-4:2012
Gully tops and manhole tops for vehicular and pedestrian
areas Part 4: Gully tops and manhole tops made of steel
reinforced concrete
Data Limite: 2013-04-08
TC 165
prEN 124-5:2012
Gully tops and manhole tops for vehicular and
pedestrian areas Part 5: Gully tops and manhole tops
made of composite
Data Limite: 2013-04-08
TC 165
prEN 124-6:2012
Gully tops and manhole tops for vehicular and
pedestrian areas Part 6: Gully tops and manhole tops
made of Polypropylene (PP), Polypropylene with mineral
modifiers (PP-MD), Polyethylene (PE) or
Polyvinyl-chloride (PVC-U)
Data Limite: 2013-04-08
TC 165
prEN 1253-1:2013
Gullies for buildings Part 1: Trapped floor gullies with a
depth water seal of at least 50 mm
Data Limite: 2013-04-14
TC 165
prEN 1253-2:2013
Gullies for buildings Part 2: Roof drains and floor gullies
without trap
Data Limite: 2013-07-07
TC 165
prEN 16506:2012
Systems for renovation of drains and sewers Lining with
a rigidly anchored plastics inner layer (RAPL)
Data Limite: 2013-04-15
TC 166
prEN 16497-1:2012
Chimneys Concrete System Chimneys Part 1:
Non-balanced flue applications
Data Limite: 2013-03-11
TC 170
prEN ISO 10343:2012
Ophthalmic instruments Ophthalmometers
(ISO/DIS 10343:2012)
Data Limite: 2013-05-13
TC 170
prEN ISO 15798:2012
Ophthalmic implants Ophthalmic viscosurgical devices
(ISO/FDIS 15798:2012)
Data Limite: 2013-03-01
TC 172
prEN ISO 217:2013
Paper Untrimmed sizes Designation and tolerances for
primary and supplementary ranges, and indication of
machine direction (ISO/FDIS 217:2013)
Data Limite: 2013-05-21
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 37 15 março 2013

DOCUMENTOS
normativos
TC 172
prEN ISO 12625-3:2013
Tissue paper and tissue products Part 3: Determination
of thickness, bulking thickness and apparent bulk density
(ISO/DIS 12625-3:2013)
Data Limite: 2013-06-10
TC 172
prEN ISO 14453:2013
Pulps Determination of acetone-soluble matter
(ISO/DIS 14453:2013)
Data Limite: 2013-06-10
TC 175
prEN 14342:2013
Wood flooring Characteristics, evaluation of conformity
and marking
Data Limite: 2013-04-07
TC 175
prEN 14915:2013
Solid wood panelling and cladding Characteristics,
evaluation of conformity and marking
Data Limite: 2013-07-07
TC 177
EN 12602:2008 /prA 1:2012
Prefabricated reinforced components of autoclaved
aerated concrete
Data Limite: 2013-04-22
TC 178
prEN 1344:2013
Clay pavers Requirements and test methods
Data Limite: 2013-06-17
TC 188
prEN ISO 7622-1:2012
Steel cord conveyor belts Longitudinal traction test Part
1: Measurement of elongation
(ISO/FDIS 7622-1:2012)
Data Limite: 2013-03-01
TC 188
prEN ISO 8094:2012
Steel cord conveyor belts Adhesion strength test of the
cover to the core layer
(ISO/FDIS 8094:2012)
Data Limite: 2013-03-01
TC 188
prEN ISO 16581:2012
Textile conveyor belts Determination of the net length of
an endless (spliced) conveyor belt
(ISO 16851:2012)
Data Limite: 2013-05-06
TC 189
prEN 13361:2012
Geosynthetic Barriers Characteristics required for use in
the construction of reservoirs and dams
Data Limite: 2013-04-22
TC 189
prEN 13362:2012
Geosynthetic Barriers Characteristics required for use in
the construction of canals
Data Limite: 2013-04-22
TC 189
prEN 13491:2012
Geosynthetic Barriers Characteristics required for use as
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
a fluid barrier in the construction of tunnels and
associated underground structures
Data Limite: 2013-04-22
TC 189
prEN 13492:2012
Geosynthetic Barriers Characteristics required for use in
the construction of liquid waste disposal sites, transfer
stations or secondary containment
Data Limite: 2013-04-22
TC 189
prEN 13493:2012
Geosynthetic Barriers Characteristics required for use in
the construction of solid waste storage and disposal sites
Data Limite: 2013-04-22
TC 189
prEN 15382:2012
Geosynthetic barriers Characteristics required for use in
transportation infrastructure
Data Limite: 2013-04-15
TC 192
prEN 694:2012
Fire-fighting hoses Semi-rigid hoses for fixed systems
Data Limite: 2013-03-04
TC 192
prEN 1846-3:2013
Firefighting and rescue service vehicles Part 3:
Permanently installed equipment - Safety and
performance
Data Limite: 2013-04-21
TC 192
prEN 1947:2012
Fire-fighting hoses Semi-rigid delivery hoses and hose
assemblies for pumps and vehicles
Data Limite: 2013-03-04
TC 192
prEN 14540:2012
Fire-fighting hoses Non-percolating layflat hoses for
fixed systems
Data Limite: 2013-03-04
TC 193
prEN 16556:2013
Adhesives Determination of the open assembly time for
thermoplastic wood adhesives for non-structural
applications
Data Limite: 2013-07-01
TC 204
prEN ISO 11137-2:2013
Sterilization of health care products Radiation Part 2:
Establishing the sterilization dose
(ISO/FDIS 11137-2:2013)
Data Limite: 2013-03-24
TC 204
EN ISO 13408-1:2011 /prA 1:2013
Aseptic processing of health care products Part 1:
General requirements
(ISO 13408-1:2011/FDAM 1:2013)
Data Limite: 2013-03-17
TC 204
prEN ISO 20857:2012
Sterilization of health care products Dry heat
Requirements for the development, validation and routine
control of a sterilization process for medical devices
(ISO 20857:2010)
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 38 15 março 2013

DOCUMENTOS
normativos
Data Limite: 2013-03-04
TC 205
prEN ISO 3826-1:2013
Plastics collapsible containers for human blood and
blood components Part 1: Conventional containers
(ISO/FDIS 3826-1:2013)
Data Limite: 2013-04-21
TC 205
prEN ISO 10555-1:2013
Intravascular catheters Sterile and single-use catheters
Part 1: General requirements
(ISO/FDIS 10555-1:2013)
Data Limite: 2013-04-28
TC 205
prEN ISO 10555-3:2013
Intravascular catheters Sterile and single-use catheters
Part 3: Central venous catheters
(ISO/FDIS 10555-3:2013)
Data Limite: 2013-04-28
TC 205
prEN ISO 10555-4:2013
Intravascular catheters Sterile and single-use catheters
Part 4: Balloon dilatation catheters
(ISO/FDIS 10555-4:2013)
Data Limite: 2013-04-28
TC 205
prEN ISO 10555-5:2013
Intravascular catheters Sterile and single-use catheters
Part 5: Over-needle peripheral catheters
(ISO/FDIS 10555-5:2013)
Data Limite: 2013-04-28
TC 206
prEN ISO 10993-3:2013
Biological evaluation of medical devices Part 3: Tests for
genotoxicity, carcinogenicity and reproductive toxicity
(ISO/FDIS 10993-3:2013)
Data Limite: 2013-04-14
TC 207
prEN 1021-1:2012
Furniture Assessment of the ignitability of upholstered
furniture Part 1: Ignition source smouldering cigarette
Data Limite: 2013-05-06
TC 207
prEN 1021-2:2012
Furniture Assessment of the ignitability of upholstered
furniture Part 2: Ignition source match flame equivalent
Data Limite: 2013-05-06
TC 207
prEN 16337:2013
Hardware for furniture Strength and loading capacity of
shelf supports
Data Limite: 2013-03-31
TC 211
EN ISO 2922:2000 /prA 1:2013
Acoustics Measurement of airborne sound emitted by
vessels on inland waterways and harbours
(ISO 2922:2000/FDAM1:2013)
Data Limite: 2013-06-07
TC 214
EN ISO 9902-1:2001 /prA 2:2013
Textile machinery Noise test code Part 1: Common
requirements
(ISO 9902-1:2001/DAM 2:2013)
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
Data Limite: 2013-06-10
TC 214
EN ISO 9902-2:2001 /prA 2:2013
Textile machinery Noise test code Part 2: Spinning
preparatory and spinning machinery
(ISO 9902-2:2001/DAM 2:2013)
Data Limite: 2013-06-10
TC 214
EN ISO 9902-3:2001 /prA 2:2013
Textile machinery Noise test code Part 3: Nonwoven
machinery
(ISO 9902-3:2001/DAM 2:2013)
Data Limite: 2013-06-10
TC 214
EN ISO 9902-4:2001 /prA 2:2013
Textile machinery Noise test code Part 4: Yarn
processing, cordage and rope manufacturing machinery
(ISO 9902-4:2001/DAM 2:2013)
Data Limite: 2013-06-10
TC 214
EN ISO 9902-5:2001 /prA 2:2013
Textile machinery Noise test code Part 5: Weaving and
knitting preparatory machinery
(ISO/DIS 9902-5:2001/DAM 2:2013)
Data Limite: 2013-06-10
TC 214
EN ISO 9902-6:2001 /prA 2:2013
Textile machinery Noise test code Part 6: Fabric
manufacturing machinery
(ISO 9902-6:2001/DAM 2:2013)
Data Limite: 2013-06-10
TC 214
EN ISO 9902-7:2001 /prA 2:2013
Textile machinery Noise test code Part 7: Dyeing and
finishing machinery
(ISO 9902-7:2001/DAM 2:2013)
Data Limite: 2013-06-10
TC 215
prEN ISO 5359:2012
Anaesthetic and respiratory equipment Low-pressure hose
assemblies for use with medical gases
(ISO/DIS 5359:2012)
Data Limite: 2013-04-01
TC 215
prEN ISO 8836:2013
Suction catheters for use in the respiratory tract
(ISO/DIS 8836:2013)
Data Limite: 2013-07-01
TC 215
prEN ISO 18082:2012
Anaesthetic and respiratory equipment
Non-interchangeable screw-threaded (NIST) low-pressure
connectors for medical gases
(ISO/DIS 18082:2012)
Data Limite: 2013-04-01
TC 217
prEN 12228:2013
Surfaces for sports areas Determination of joint strength
of synthetic surfaces
Data Limite: 2013-06-10
TC 217
prEN 12234:2013
Surfaces for sports areas Determination of ball roll
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 39 15 março 2013

DOCUMENTOS
normativos
behaviour
Data Limite: 2013-06-10
TC 217
prEN 12235:2013
Surfaces for sports areas Determination of vertical ball
behaviour
Data Limite: 2013-06-10
TC 217
prEN 12616:2013
Surfaces for sports areas Determination of water
infiltration rate
Data Limite: 2013-06-10
TC 217
prEN 14877:2013
Synthetic surfaces for outdoor sports areas Specification
Data Limite: 2013-06-24
TC 217
prEN 15330-1:2013
Surfaces for sports areas Synthetic turf and
needle-punched surfaces primarily designed for outdoor use
Part 1: Specification for synthetic turf surfaces for
football, hockey, rugby union training, tennis and
multi-sports use
Data Limite: 2013-06-24
TC 218
prEN 1360:2013
Rubber and plastic hoses and hose assemblies for
measured fuel dispensing systems Specification
Data Limite: 2013-03-24
TC 218
prEN 13483:2013
Rubber and plastic hoses and hose assemblies with
internal vapour recovery for measured fuel dispensing
systems Specification
Data Limite: 2013-03-24
TC 218
prEN 14420-1:2013
Hose fittings with clamp units Part 1: Requirements,
types of fixing and connection, designation and testing
Data Limite: 2013-04-14
TC 218
prEN 14420-2:2013
Hose fittings with clamp units Part 2: Hose side parts of
hose tail
Data Limite: 2013-04-14
TC 218
prEN 14420-3:2013
Hose fittings with clamp units Part 3: Clamp units,
bolted or pinned
Data Limite: 2013-04-14
TC 218
prEN 14420-4:2013
Hose fittings with clamp units Part 4: Flange connections
Data Limite: 2013-04-14
TC 218
prEN 14420-5:2013
Hose fittings with clamp units Part 5: Threaded
connections
Data Limite: 2013-04-14
TC 218
prEN 14420-6:2013
Hose fittings with clamp units Part 6: TW tank truck
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
couplings
Data Limite: 2013-04-14
TC 218
prEN 14420-7:2013
Hose fittings with clamp units Part 7: Cam locking
couplings
Data Limite: 2013-04-14
TC 218
prEN 14420-8:2013
Hose fittings with clamp units Part 8: Symmetrical half
coupling (Guillemin system)
Data Limite: 2013-04-14
TC 218
prEN 14422:2013
Clamp type coupling assemblies for liquefied petroleum
gas (LPG) transfer hoses
Data Limite: 2013-04-07
TC 218
prEN 14423:2013
Clamp type coupling assemblies for use with steam hoses
rated for pressures up to 18 bar
Data Limite: 2013-04-07
TC 218
prEN 14424:2013
Hose fittings with screwed ferrules
Data Limite: 2013-04-07
TC 219
prEN 12496:2013
Galvanic anodes for cathodic protection in seawater and
saline mud
Data Limite: 2013-03-24
TC 224
prEN 1545-1:2012
Identification card systems Surface transport
applications Part 1: Elementary data types, general code
lists and general data elements
Data Limite: 2013-04-29
TC 224
prEN 1545-2:2012
Identification card systems Surface transport
applications Part 2: Transport and travel payment related
data elements and code lists
Data Limite: 2013-04-29
TC 224
prEN 14169-2:2013
Protection Profile for Secure signature creation device
Part 2: Device with key generation
Data Limite: 2013-04-07
TC 224
prEN 419111-1:2013
Protection profiles for signature creation and verification
application Part 1: Introduction
Data Limite: 2013-07-28
TC 224
prEN 419111-2:2013
Protection profiles for signature creation and
verification application Signature creation application
Part 2: Core PP
Data Limite: 2013-07-28
TC 224
prEN 419111-3:2013
Protection profiles for signature creation and
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 40 15 março 2013

DOCUMENTOS
normativos
verification application Signature creation application
Part 3: Possible extensions
Data Limite: 2013-07-28
TC 224
prEN 419111-4:2013
Protection profiles for signature creation and
verification application Signature verification
application Part 4: Core PP
Data Limite: 2013-07-28
TC 224
prEN 419111-5:2013
Protection profiles for signature creation and
verification application Signature verification
application Part 5: Possible extensions
Data Limite: 2013-07-28
TC 225
prEN ISO/IEC 29160:2013
Information technology Radio frequency identification
for item management RFID Emblem
(ISO/IEC 29160:2012)
Data Limite: 2013-08-07
TC 226
prEN 1790:2012
Road marking materials Preformed road markings
Data Limite: 2013-03-04
TC 226
prEN 1871:2012
Road marking materials Paint, thermoplastic and cold
plastic materials Specifications
Data Limite: 2013-03-04
TC 226
EN 12899-4:2007 /prA 1:2012
Fixed, vertical road traffic signs Part 4: Factory
production control
Data Limite: 2013-03-20
TC 226
prEN 12966:2013
Road vertical signs Variable message traffic signs
Data Limite: 2013-08-07
TC 226
prEN 14389-1:2013
Road traffic noise reducing devices Procedures for
assessing long term performance Part 1: Acoustical
elements
Data Limite: 2013-07-28
TC 226
prEN 14389-2:2013
Road traffic noise reducing devices Procedures for
assessing long term performance Part 2: Non-acoustical
characteristics
Data Limite: 2013-07-28
TC 227
prEN 12697-43:2012
Bituminous mixtures Test methods for hot mix asphalt
Part 43: Resistance to fuel
Data Limite: 2013-03-11
TC 230
prEN 16493:2012
Water quality Nomenclatural requirements for the
recording of biodiversity data, taxonomic checklists and
keys
Data Limite: 2013-04-22
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
TC 230
prEN 16503:2012
Water quality Guidance standard on assessing the
hydromorphological features of transitional and coastal
waters
Data Limite: 2013-04-22
TC 230
prEN ISO 9308-1:2012
Water quality Enumeration of Escherichia coli and
coliform bacteria Part 1: Membrane filtration method for
waters with low bacterial background flora
(ISO/DIS 9308-1:2012)
Data Limite: 2013-04-22
TC 230
prEN ISO 17994:2012
Water quality Requirements for the comparison of the
relative recovery of microorganisms by two quantitative
methods
(ISO/DIS 17994:2012)
Data Limite: 2013-03-04
TC 230
prEN ISO 27108:2012
Water quality Determination of selected plant
treatment agents and biocide products Method using
solid-phase microextraction (SPME) followed by gas
chromatography-mass spectrometry (GC-MS)
(ISO 27108:2010)
Data Limite: 2013-03-11
TC 231
prCEN/TR 15350:2013
Mechanical vibration Guideline for the assessment of
exposure to hand-transmitted vibration using available
information including that provided by manufacturers of
machinery
Data Limite: 2013-05-07
TC 231
prEN ISO 10819:2013
Mechanical vibration and shock Hand-arm vibration
Measurement and evaluation of the vibration
transmissibility of gloves at the palm of the hand
(ISO/FDIS 10819:2013)
Data Limite: 2013-04-28
TC 232
prEN 1012-3:2013
Compressors and vaccum pumps Safety requirements
Part 3: Process compressors
Data Limite: 2013-08-07
TC 234
prEN 1594:2013
Gas infrastructure Pipelines for maximum operating
pressure over 16 bar Functional requirements
Data Limite: 2013-06-17
TC 234
prEN 12007-5:2012
Gas infrastructure Pipelines for maximum operating
pressure up to and including 16 bar Part 5: Service lines
- Specific functional requirements
Data Limite: 2013-03-18
TC 234
prEN 16348:2013
Gas infrastructure Safety Management System (SMS) for
gas transmission infrastructure and Pipeline Integrity
Management System (PIMS) for gas transmission
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 41 15 março 2013

DOCUMENTOS
normativos
pipelines Functional requirements
Data Limite: 2013-04-07
TC 237
prEN 16314:2013
Gas meters Additional functionalities
Data Limite: 2013-03-17
TC 239
prEN 13718-1:2013
Medical vehicles and their equipment Air ambulances
Part 1: Requirements for medical devices used in air
ambulances
Data Limite: 2013-07-14
TC 242
prEN 1709:2013
Safety requirements for cableway installations designed
to carry persons Precommissioning inspection,
maintenance, operational inspection and checks
Data Limite: 2013-08-07
TC 242
prEN 1908:2013
Safety requirements of cableway installations designed
to carry persons Tensioning devices
Data Limite: 2013-08-07
TC 242
prEN 12929-1:2013
Safety requirements for cableway installations designed
to carry persons General requirements Part 1:
Requirements for all installations
Data Limite: 2013-08-07
TC 242
prEN 12929-2:2013
Safety requirements for cableway installations designed
to carry persons General requirements Part 2: Additional
requirements for reversible bicable aerial ropeways
without carrier truck brakes
Data Limite: 2013-08-07
TC 242
prEN 12930:2013
Safety requirements for cableway installations designed
to carry persons Calculations
Data Limite: 2013-08-07
TC 242
prEN 13107:2013
Safety requirements for cableway installations designed
to carry persons Civil engineering works
Data Limite: 2013-07-14
TC 242
prEN 13223:2013
Safety requirements for cableway installations designed
to carry persons Drive systems and other mechanical
equipment
Data Limite: 2013-08-07
TC 242
prEN 13243:2013
Safety requirements for cableway installations designed
to carry persons Electrical equipment other than for
drive systems
Data Limite: 2013-08-07
TC 246
prEN 15286:2013
Agglomerated stone Slabs and tiles for wall finishes
(internal and external)
Data Limite: 2013-03-24
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
TC 247
prEN 12098-1:2013
Controls for heating systems Part 1: Control equipment
for hot water heating systems
Data Limite: 2013-05-07
TC 247
prEN 14908-2:2012
Open Data Communication in Building Automation,
Controls and Building Management Control Network
Protocol Part 2: Twisted Pair Communication
Data Limite: 2013-03-11
TC 247
prEN 14908-3:2012
Open Data Communication in Building Automation,
Controls and Building Management Control Network
Protocol Part 3: Power Line Channel Specification
Data Limite: 2013-03-11
TC 247
prEN 14908-4:2012
Open Data Communication in Building Automation,
Controls and Building Management - Control Network
Protocol Part 4: IP Communication
Data Limite: 2013-03-11
TC 248
prEN 14682:2012
Safety of children's clothing Cords and drawstrings on
children's clothing Specifications
Data Limite: 2013-03-11
TC 248
prEN 15619:2012
Rubber or plastic coated fabrics Safety of temporary
structures (tents) Specification for coated fabrics
intended for tents and related structures
Data Limite: 2013-03-18
TC 248
prEN ISO 105-B02:2013
Textiles Tests for colour fastness Part B02: Colour
fastness to artificial light: Xenon arc fading lamp test
(ISO/FDIS 105-B02:2013)
Data Limite: 2013-04-07
TC 248
prEN ISO 12945-3:2012
Textiles Determination of the fabric propensity to
surface pilling, fuzzing or matting Part 3: Random
tumble pilling method
(ISO/DIS 12945-3:2012)
Data Limite: 2013-04-29
TC 248
prEN ISO 13934-1:2012
Textiles Tensile properties of fabrics Part 1:
Determination of maximum force and elongation at
maximum force using the strip method (ISO/FDIS
13934-1:2012)
Data Limite: 2013-03-01
TC 248
prEN ISO 16373-3:2012
Textiles Dyestuffs Part 3: Method for determination of
certain carcinogenic extractable dyestuffs (method using
triethylamine/methanol)
(ISO/DIS 16373-3:2012)
Data Limite: 2013-04-08
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 42 15 março 2013

DOCUMENTOS
normativos
TC 249
prEN 15346:2013
Plastics Recycled plastics Characterisation of poly(vinyl
chloride) (PVC) recyclates
Data Limite: 2013-07-28
TC 249
prEN 15348:2013
Plastics Recycled plastics Characterisation of
poly(ethylene terephthalate) (PET) recyclates
Data Limite: 2013-07-28
TC 249
EN ISO 307:2007 /prA 1:2012
Plastics Polyamides - Determination of viscosity number
Amendment 1: Corrections, and update to reference to
JIS K 6920-2
(ISO 307:2007/FDAM 1:2012)
Data Limite: 2013-03-01
TC 249
EN ISO 10350-1:2008 /prA 1:2013
Plastics Acquisition and presentation of comparable
single-point data Part 1: Moulding materials
(ISO 10350-1:2008/DAM 1:2013)
Data Limite: 2013-03-10
TC 249
prEN ISO 11358-1:2013
Plastics Thermogravimetry (TG) of polymers Part 1:
General principles
(ISO/DIS 11358-1:2013)
Data Limite: 2013-07-14
TC 249
prEN ISO 11403-1:2012
Plastics Acquisition and presentation of comparable
multipoint data Part 1: Mechanical properties
(ISO/DIS 11403-1:2012)
Data Limite: 2013-05-20
TC 250
EN 1993-1-1:2005 /prA 1:2013
Eurocode 3: Design of steel structures - Part 1-1: General
rules and rules for buildings
Data Limite: 2013-06-10
TC 250
EN 1999-1-1:2007 /prA 2:2013
Eurocode 9: Design of aluminium structures Part 1-1:
General structural rules
Data Limite: 2013-07-07
TC 251
prCEN ISO/TS 14441:2012
Health informatics Security and privacy requirements of
EHR systems for use in conformity assessment
(ISO/DTS 14441:2012)
Data Limite: 2013-03-06
TC 251
prEN ISO 13940:2012
Health informatics System of concepts to support
continuity of care
(ISO/DIS 13940:2012)
Data Limite: 2013-05-13
TC 251
prEN ISO 21549-1:2013
Health informatics Patient healthcard data Part 1: General
structure
(ISO/FDIS 21549-1:2013)
Data Limite: 2013-04-10
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
TC 251
prEN ISO 22600-1:2012
Health informatics Privilege management and access
control Part 1: Overview and policy management
(ISO/DIS 22600-1:2012)
Data Limite: 2013-04-15
TC 251
prEN ISO 22600-2:2012
Health informatics Privilege management and access
control Part 2: Formal models
(ISO/DIS 22600-2:2012)
Data Limite: 2013-04-15
TC 251
prEN ISO 22600-3:2012
Health informatics Privilege management and access
control Part 3: Implementations
(ISO/DIS 22600-3:2012)
Data Limite: 2013-04-15
TC 252
EN 12221-1:2008 /prA 1:2013
Child use and care articles Changing units for domestic
use Part 1: Safety requirements
Data Limite: 2013-06-07
TC 252
EN 12221-2:2008 /prA 1:2013
Child use and care articles Changing units for domestic
use Part 2: Test methods
Data Limite: 2013-06-07
TC 252
prEN 13209-2:2012
Child use and care articles Baby carriers Part 2: Soft
carrier
Data Limite: 2013-05-13
TC 256
prCEN/TR 16513:2013
Railway applications Track Survey of track geometry
quality
Data Limite: 2013-04-17
TC 256
EN 15085-1:2007 /prA 1:2013
Railway applications Welding of railway vehicles and
components Part 1: General
Data Limite: 2013-03-17
TC 256
prEN 16116-1:2013
Railway applications Design requirements for steps,
handrails and associated access for staff Part 1:
Passenger vehicles, luggage vans and locomotives
Data Limite: 2013-04-28
TC 256
prEN 16116-2:2013
Railway applications Design requirements for steps,
handrails and associated access for staff Part 2: Freight
wagons
Data Limite: 2013-04-28
TC 256
prEN 16186-1:2012
Railway applications Driver's cab Part 1: Visibility,
layout, access
Data Limite: 2013-03-20
TC 256
prEN 16272-3-2:2012
Railway applications Track - Noise barriers and related
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 43 15 março 2013

DOCUMENTOS
normativos
devices acting on airborne sound propagation - Test
method for determining the acoustic performance Part
3-2: Normalized railway noise spectrum and single number
ratings for direct field applications
Data Limite: 2013-03-11
TC 256
prEN 16272-6:2012
Railway applications Track - Noise barriers and related
devices acting on airborne sound propagation - Test method
for determining the acoustic performance Part 6: Intrinsic
characteristics - In situ values of airborne sound
insulation under direct sound field conditions
Data Limite: 2013-03-11
TC 256
prEN 16494:2012
Railway applications Requirements for ERTMS
Trackside Boards
Data Limite: 2013-04-29
TC 256
prEN 16507:2012
Railway applications Ground based service Diesel
refuelling equipment
Data Limite: 2013-04-22
TC 256
prEN ISO 3095:2013
Acoustics Railway applications Measurement of noise
emitted by railbound vehicles
(ISO/FDIS 3095:2013)
Data Limite: 2013-03-31
TC 260
prEN 16317:2013
Fertilizers Determination of trace elements
Determination of arsenic by inductively coupled
plasma-atomic emission spectrometry (ICP-AES) after
aqua regia dissolution
Data Limite: 2013-07-28
TC 260
prEN 16320:2013
Fertilizers Determination of trace elements
Determination of mercury by vapour generation (VG)
after aqua regia dissolution
Data Limite: 2013-07-28
TC 261
prEN 12377:2013
Packaging Flexible tubes Test method for the air
tightness of closures
Data Limite: 2013-07-14
TC 261
prEN 16565:2013
Packaging Flexible tubes Test method to determine the
orientation of the flip-top cap
Data Limite: 2013-07-14
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
TC 263
prEN 1300:2013
Secure storage units Classification for high security
locks according to their resistance to unauthorized
opening
Data Limite: 2013-04-14
TC 264
prEN 14181:2012
Stationary source emissions Quality assurance of
automated measuring systems
Data Limite: 2013-03-18
TC 264
prEN 16253:2013
Air quality Atmospheric measurements near ground with
active Differential Optical Absorption Spectroscopy
(DOAS) Ambient air and diffuse emission measurements
Data Limite: 2013-04-14
TC 265
EN ISO 8044:1999 /prA 1:2012
Corrosion of metals and alloys Basic terms and
definitions Amendment 1
(ISO 8044:1999/DAM 1:2012)
Data Limite: 2013-03-25
TC 271
prEN 14462:2012
Surface treatment equipment - Noise test code for
surface treatment equipment including its ancillary
handling equipment Accuracy grades 2 and 3
Data Limite: 2013-05-06
TC 275
prEN 16187:2012
Foodstuffs Determination of fumonisin B1 and fumonisin
B2 in processed maize containing foods for infants and
young children HPLC method with immunoaffinity column
cleanup and fluorescence detection after precolumn
derivatisation
Data Limite: 2013-05-13
TC 275
prEN ISO 16140-1:2013
Microbiology of food and animal feed Method validation
Part 1: Vocabulary
(ISO/DIS 16140-1:2013)
Data Limite: 2013-06-10
TC 275
prEN ISO 16140-2:2013
Microbiology of food and animal feed Method validation
Part 2: Protocol for the validation of alternative
(proprietary) methods against a reference method
(ISO/DIS 16140-2:2013)
Data Limite: 2013-06-10
TC 262
prEN ISO 27830:2013
Metallic and other inorganic coatings Guidelines for
specifying metallic and inorganic coatings
(ISO 27830:2008)
Data Limite: 2013-06-17
TC 262
prEN ISO 6509:2012
Corrosion of metals and alloys Determination of
dezincification resistance of copper alloys with zinc
(ISO/DIS 6509:2012)
Data Limite: 2013-03-18
TC 275
prEN ISO 17468:2013
Microbiology of food and animal feed Technical
requirements and guidance on establishment or revision
of standard methods
(ISO/DIS 17468:2013)
Data Limite: 2013-06-10
TC 275
EN ISO 21570:2005 /prA 1:2013
Foodstuffs Methods of analysis for the detection of
genetically modified organisms and derived products
General requirements and definitions
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 44 15 março 2013

DOCUMENTOS
normativos
(ISO 21570:2005/FDAM 1:2013)
Data Limite: 2013-03-10
TC 275
EN ISO 24276:2006 /prA 1:2013
Foodstuffs Methods of analysis for the detection of
genetically modified organisms and derived products
General requirements and definitions
(ISO 24276:2006/FDAM 1:2013)
Data Limite: 2013-03-10
TC 277
prEN 13964:2013
Suspended ceilings Requirements and test methods
Data Limite: 2013-07-28
TC 278
prCEN ISO/TS 25110:2013
Electronic fee collection Interface definition for
on-board account using integrated circuit card (ICC)
(ISO/DTS 25110:2013)
Data Limite: 2013-04-10
TC 278
prCEN/TS 13149-8:2013
Public transport Road vehicle scheduling and control
systems Part 8: Physical layer for IP communication
Data Limite: 2013-04-17
TC 278
prEN 15213-1:2012
Intelligent transport systems After-theft systems for the
recovery of stolen vehicles Part 1: Reference
architecture and terminology
Data Limite: 2013-03-25
TC 278
prEN 15213-2:2012
Intelligent transport systems After-theft systems for the
recovery of stolen vehicles Part 2: Common status
message elements
Data Limite: 2013-03-25
TC 278
prEN 15213-3:2012
Intelligent transport systems After-theft systems for the
recovery of stolen vehicles Part 3: Interface and system
requirements in terms of short range communication
system
Data Limite: 2013-03-25
TC 278
prEN 15213-5:2012
Intelligent transport systems After-theft systems for the
recovery of stolen vehicles Part 5: Messaging interface
Data Limite: 2013-03-25
TC 278
prEN 15509:2012
Electronic fee collection Interoperability application
profile for DSRC
Data Limite: 2013-03-11
TC 278
prEN 15213-4:2012
Intelligent transport systems After-theft systems for the
recovery of stolen vehicles Part 4: Interface and system
requirements in terms of long range communication
system
Data Limite: 2013-03-25
TC 278
prEN ISO 15007-1:2013
Road vehicles Measurement of driver visual behaviour
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
with respect to transport information and control systems
Part 1: Definitions and parameters
(ISO/DIS 15007-1:2013)
Data Limite: 2013-07-01
TC 282
prEN ISO 16903:2013
Characteristics of LNG influencing design and material
selection
(ISO/DIS 16903:2013)
Data Limite: 2013-07-07
TC 286
prEN 12493:2013
LPG equipment and accessories Welded steel pressure
vessels for LPG road tankers Design and manufacture
Data Limite: 2013-07-14
TC 286
prEN 13776:2013
LPG equipment and accessories Filling and discharge
procedures for LPG road tankers
Data Limite: 2013-03-17
TC 288
prEN 1537:2013
Execution of special geotechnical work Ground anchors
Data Limite: 2013-04-07
TC 289
prEN ISO 2588:2012
Leather Sampling Number of items for a gross sample
(ISO/DIS 2588:2012)
Data Limite: 2013-03-04
TC 289
prEN ISO 17130:2013
Leather Physical and mechanical tests Determination of
dimensional change
(ISO/FDIS 17130:2013)
Data Limite: 2013-03-24
TC 289
prEN ISO 17228:2012
Leather Tests for colour fastness Change in colour with
accelerated ageing
(ISO/DIS 17228:2012)
Data Limite: 2013-04-29
TC 289
prEN ISO 17234-1:2012
Leather Chemical tests for the determination of certain
azo colorants in dyed leathers Part 1: Determination of
certain aromatic amines derived from azo colorants
(ISO/DIS 17234-1:2012)
Data Limite: 2013-03-04
TC 289
prEN ISO 17502:2013
Leather Determination of surface reflectance
(ISO/FDIS 17502:2013)
Data Limite: 2013-03-24
TC 289
prEN ISO 18219:2012
Leather Determination of chlorinated hydrocarbons in
leather Chromatographic method for short-chain
chlorinated paraffins (SCCP)
(ISO/DIS 18219:2012)
Data Limite: 2013-04-29
TC 290
prEN ISO 10579:2013
Geometrical product specifications (GPS) Dimensioning
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 45 15 março 2013

DOCUMENTOS
normativos
and tolerancing Non-rigid parts
(ISO 10579:2010
including Cor 1:2011)
Data Limite: 2013-06-10
TC 290
prEN ISO 16610-60:2012
Geometrical Product Specification (GPS) Filtration Part
60: Linear areal filters: Basic concepts
(ISO/DIS 16610-60)
Data Limite: 2013-03-18
TC 290
prEN ISO 16610-61:2012
Geometrical Product Specification (GPS) Filtration Part 61:
Linear areal filters - Gaussian filters
(ISO/DIS 16610-61:2012)
Data Limite: 2013-03-18
TC 290
prEN ISO 25178-1:2013
Geometrical product specifications (GPS) Surface
texture:Areal Part 1: Indication of surface texture
(ISO/DIS 25178-1:2013)
Data Limite: 2013-06-24
TC 290
prEN ISO 25178-604:2013
Geometrical product specifications (GPS) Surface
texture: Areal Part 604: Nominal characteristics of
non-contact (coherence scanning interferometry)
instruments (ISO/FDIS 25178-604:2013)
Data Limite: 2013-04-14
TC 290
prEN ISO 25178-606:2013
Geometrical product specification (GPS) Surface texture:
Areal Part 606: Nominal characteristics of non-contact
(focus variation) instruments
(ISO/DIS 25178-606:2013)
Data Limite: 2013-04-24
TC 292
prCEN/TS 16023:2013
Characterization of waste Determination of gross calorific
value and calculation of net calorific value
Data Limite: 2013-05-07
TC 293
EN ISO 10328:2006 /prA 1:2013
Prosthetics Structural testing of lower-limb prostheses
Requirements and test methods
(ISO 10328:2006/FDAM 1:2013)
Data Limite: 2013-05-07
TC 294
prEN 13757-1:2012
Communication system for and remote reading of meters
Part 1: Data exchange
Data Limite: 2013-05-06
TC 295
prEN 16510-1:2013
Residential solid fuel burning appliances Part 1: General
requirements and test methods
Data Limite: 2013-06-10
TC 295
prEN 16510-2-1:2013
Residential solid fuel burning appliances Part 2-1:
Roomheaters
Data Limite: 2013-06-10
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
TC 295
prEN 16510-2-2:2013
Residential solid fuel burning appliances Part 2-2: Inset
appliances including open fires
Data Limite: 2013-06-10
TC 295
prEN 16510-2-3:2013
Residential solid fuel burning appliances Part 2-3:
Cookers
Data Limite: 2013-06-10
TC 295
prEN 16510-2-4:2013
Residential solid fuel burning appliances Part 2-4:
Independent boilers - Nominal heat output up to 50 kW
Data Limite: 2013-06-10
TC 296
prEN 14432:2013
Tanks for the transport of dangerous goods Tank equipment
for the transport of liquid chemicals and liquefied gases
Product discharge and air inlet valves
Data Limite: 2013-07-28
TC 296
prEN 14433:2013
Tanks for the transport of dangerous goods Tank
equipment for the transport of liquid chemicals and
liquefied gases Foot valves
Data Limite: 2013-07-21
TC 296
prEN 16522:2013
Tanks for transport of dangerous goods Service equipment
for tanks Flame arresters for venting systems
Data Limite: 2013-06-10
TC 302
prEN ISO 5536:2012
Milk fat products Determination of water content Karl
Fischer method
(ISO 5536:2009)
Data Limite: 2013-04-15
TC 302
prEN ISO 9233-1:2012
Cheese, cheese rind and processed cheese Determination
of natamycin content Part 1: Molecular absorption
spectrometric method for cheese rind
(ISO 9233-1:2007 including Amd 1:2012)
Data Limite: 2013-04-15
TC 302
prEN ISO 9233-2:2012
Cheese, cheese rind and processed cheese Determination
of natamycin content Part 2: High-performance liquid
chromatographic method for cheese, cheese rind and
processed cheese
(ISO 9233-2:2007 including Amd 1:2012)
Data Limite: 2013-04-15
TC 302
prEN ISO 12779:2012
Lactos Determination of water conte Karl Fischer method
(ISO 12779:2011)
Data Limite: 2013-04-15
TC 305
prEN 1127-2:2012
Explosive atmospheres Explosion prevention and
protection Part 2: Basic concepts and methodology for
mining
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 46 15 março 2013

DOCUMENTOS
normativos
Data Limite: 2013-04-08
TC 309
prEN ISO 10734:2013
Footwear Test methods for slide fasteners Strength of
slide fastener pullers
(ISO/DIS 10734:2013)
Data Limite: 2013-06-17
TC 309
prEN ISO 10750:2013
Footwear Test method for slide fasteners Attachment
strength of end stops
(ISO/DIS 10750:2013)
Data Limite: 2013-06-17
TC 309
prEN ISO 10751:2013
Footwear Test methods for slide fasteners Resistance to
repeated opening and closing
(ISO/DIS 10751:2013)
Data Limite: 2013-06-17
TC 309
prEN ISO 10764:2013
Footwear Test methods for slide fasteners Lateral
strength
(ISO/DIS 10764:2013)
Data Limite: 2013-06-17
TC 309
prEN ISO 17694:2013
Footwear Test methods for uppers and lining Flex
resistance
(ISO/DIS 17694:2013)
Data Limite: 2013-06-17
TC 309
prEN ISO 17697:2013
Footwear Test methods for uppers, lining and insocks
Seam strength
(ISO/DIS 17697:2013)
Data Limite: 2013-06-17
TC 309
prEN ISO 17698:2013
Footwear Test methods for uppers Delamination
resistance
(ISO/DIS 17698:2013)
Data Limite: 2013-06-17
TC 309
prEN ISO 17701:2013
Footwear Test methods for uppers, lining and insocks
Colour migration
(ISO/DIS 17701:2013)
Data Limite: 2013-07-14
TC 309
prEN ISO 18403:2013
Footwear Test methods for slide fasteners Resistance to
damage during closure under a lateral force
(ISO/DIS 18403:2013)
Data Limite: 2013-06-17
TC 309
prEN ISO 22649:2013
Footwear Test methods for insoles and insocks Water
absorption and desorption
(ISO/DIS 22649:2013)
Data Limite: 2013-06-17
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
TC 319
prEN 15628:2012
Maintenance Qualification of maintenance personnel
Data Limite: 2013-05-13
TC 329
prEN ISO 24801-1:2012
Recreational diving services - Requirements for the
training of recreational scuba divers Part 1: Level 1 -
Supervised diver
(ISO/DIS 24801-1:2012)
Data Limite: 2013-03-04
TC 329
prEN ISO 24801-2:2012
Recreational diving services - Requirements for the
training of recreational scuba divers Part 2: Level 2 -
Autonomous diver
(ISO/DIS 24801-2:2012)
Data Limite: 2013-03-04
TC 329
prEN ISO 24801-3:2012
Recreational diving services - Requirements for the
training of recreational scuba divers Part 3: Level 3 -
Dive leader
(ISO/DIS 24801-3:2012)
Data Limite: 2013-03-04
TC 329
prEN ISO 24802-1:2012
Recreational diving services - Requirements for the
training of scuba instructors Part 1: Level
(ISO/DIS 24802-1:2012)
Data Limite: 2013-03-04
TC 329
prEN ISO 24802-2:2012
Recreational diving services - Requirements for the
training of scuba instructors Part 2: Level 2
(ISO/DIS 24802-2:2012)
Data Limite: 2013-03-04
TC 333
prEN ISO 4210-1:2012
Cycles Safety requirements for bicycles Part 1: Terms and
definitions
(ISO/DIS 4210-1:2012)
Data Limite: 2013-04-08
TC 333
prEN ISO 4210-2:2012
Cycles Safety requirements for bicycles Part 2:
Requirements for city and trekking, young adult,
mountain and racing bicycles
(ISO/DIS 4210-2:2012)
Data Limite: 2013-04-08
TC 333
prEN ISO 4210-3:2012
Cycles Safety requirements for bicycles Part 3: Common
test methods
(ISO/DIS 4210-3:2012)
Data Limite: 2013-04-08
TC 333
prEN ISO 4210-4:2012
Cycles Safety requirements for bicycles Part 4: Braking
test methods
(ISO/DIS 4210-4:2012)
Data Limite: 2013-04-08
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 47 15 março 2013

DOCUMENTOS
normativos
TC 333
prEN ISO 4210-5:2012
Cycles Safety requirements for bicycles Part 5: Steering
test methods
(ISO/DIS 4210-5:2012)
Data Limite: 2013-04-08
TC 333
prEN ISO 4210-6:2012
Cycles Safety requirements for bicycles Part 6: Frame
and fork test methods
(ISO/DIS 4210-6:2012)
Data Limite: 2013-04-08
TC 333
prEN ISO 4210-7:2012
Cycles Safety requirements for bicycles Part 7: Wheels
and rims test methods
(ISO/DIS 4210-7:2012)
Data Limite: 2013-04-08
TC 333
prEN ISO 4210-8:2012
Cycles Safety requirements for bicycles Part 8: Pedals
and crank test methods
(ISO/DIS 4210-8:2012)
Data Limite: 2013-04-08
TC 333
prEN ISO 4210-9:2012
Cycles Safety requirements for bicycles Part 9: Saddles
and seat-post test methods
(ISO/DIS 4210-9:2012)
Data Limite: 2013-04-08
TC 333
prEN ISO 8098:2012
Cycles Safety requirements for bicycles for young
children
(ISO/DIS 8098:2012)
Data Limite: 2013-03-04
TC 335
prEN ISO 16559:2013
Solid biofuels Terminology, definitions and descriptions
(ISO/DIS 16559:2013)
Data Limite: 2013-07-01
TC 335
prEN ISO 16948:2013
Solid biofuels Determination of total content of carbon,
hydrogen and nitrogen
(ISO/DIS 16948:2013)
Data Limite: 2013-07-01
TC 335
prEN ISO 16967:2013
Solid biofuels Determination of major elements
(ISO/DIS 16967:2013)
Data Limite: 2013-07-01
TC 335
prEN ISO 16968:2013
Solid biofuels Determination of minor elements
(ISO/DIS 16968:2013)
Data Limite: 2013-07-01
TC 335
prEN ISO 17225-1:2012
Solid biofuels Fuel specifications and classes Part 1:
General requirements
(ISO/DIS 17225-1:2012)
Data Limite: 2013-03-18
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
TC 335
prEN ISO 17225-2:2012
Solid biofuels Fuel specifications and classes Part 2:
Graded wood pellets
(ISO/DIS 17225-2:2012)
Data Limite: 2013-03-18
TC 335
prEN ISO 17225-3:2012
Solid biofuels Fuel specifications and classes Part 3:
Graded wood briquettes
(ISO/DIS 17225-3:2012)
Data Limite: 2013-03-18
TC 335
prEN ISO 17225-4:2012
Solid biofuels Fuel specifications and classes Part 4:
Graded wood chips
(ISO/DIS 17225-4:2012)
Data Limite: 2013-03-18
TC 335
prEN ISO 17225-5:2012
Solid biofuels Fuel specifications and classes Part 5:
Graded firewood
(ISO/DIS 17225-5:2012)
Data Limite: 2013-03-18
TC 335
prEN ISO 17225-6:2012
Solid biofuels Fuel specifications and classes Part 6:
Graded non-woody pellets
(ISO/DIS 17225-6:2012)
Data Limite: 2013-03-18
TC 335
prEN ISO 17225-7:2012
Solid biofuels Fuel specifications and classes Part 7:
Graded non-woody briquettes
(ISO/DIS 17225-7:2012)
Data Limite: 2013-03-18
TC 336
prEN 1429:2013
Bitumen and bituminous binders Determination of residue
on sieving of bituminous emulsions, and determination of
storage stability by sieving
Data Limite: 2013-03-10
TC 336
prEN 12592:2013
Bitumen and bituminous binders Determination of
solubility
Data Limite: 2013-07-01
TC 336
prEN 12594:2013
Bitumen and bituminous binders Preparation of test
samples
Data Limite: 2013-07-01
TC 336
prEN 12595:2013
Bitumen and bituminous binders Determination of
kinematic viscosity
Data Limite: 2013-07-01
TC 336
prEN 12596:2013
Bitumen and bituminous binders Determination of
dynamic viscosity by vacuum capillary
Data Limite: 2013-07-01
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 48 15 março 2013

DOCUMENTOS
normativos
TC 336
prEN 12607-1:2013
Bitumen and bituminous binders Determination of the
resistance to hardening under influence of heat and air
Part 1: RTFOT method
Data Limite: 2013-07-01
TC 336
prEN 12607-2:2013
Bitumen and bituminous binders Determination of the
resistance to hardening under influence of heat and air
Part 2: TFOT method
Data Limite: 2013-07-01
TC 336
prEN 12607-3:2013
Bitumen and bituminous binders Determination of the
resistance to hardening under influence of heat and air
Part 3: RFT method
Data Limite: 2013-07-01
TC 336
prEN 13924-1:2013
Bitumen and bituminous binders Specification framework
for special paving grade bitumen Part 1: Hard paving
grade bitumens
Data Limite: 2013-06-10
TC 345
prEN ISO 17184:2013
Soil quality Determination of carbon and nitrogen by
near infrared spectrometry
(ISO/DIS 17184:2013)
Data Limite: 2013-07-07
TC 345
prEN ISO 17380:2013
Soil quality Determination of total cyanide and easily
liberatable cyanide Continuous-flow analysis method
(ISO/FDIS 17380:2013)
Data Limite: 2013-05-07
TC 345
prEN ISO 23611-6:2013
Soil quality Sampling of soil invertebrates Part 6:
Guidance for the design of sampling programmes with
soil invertebrates
(ISO 23611-6:2012)
Data Limite: 2013-06-10
TC 346
prEN 16515:2012
Conservation of Cultural Heritage Guidelines to
characterize natural stone used in cultural heritage
Data Limite: 2013-05-20
TC 351
prCEN/TS 16516:2013
Construction products Assessment of release of
dangerous substances Determination of emissions into
indoor air
Data Limite: 2013-04-24
TC 377
prEN 16495:2012
Air Traffic Management Information security for
organisations supporting civil aviation operations
Data Limite: 2013-03-18
TC 379
prEN ISO 80601-2-69:2012
Medical Electrical Equipment Part 2-69: Particular
requirements for basic safety and essential performance
of oxygen concentrator equipment
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
(ISO/DIS 80601-2-69:2012)
Data Limite: 2013-03-25
TC 392
prEN 16343:2013
Cosmetics Analysis of cosmetic products Determination
of 3-iodo-2-propynyl butylcarbamate (IPBC) in
cosmetic preparations, LC-MS methods
Data Limite: 2013-03-24
TC 392
prEN 16521:2013
Cosmetics Analytical methods GC/MS method for the
identification and assay of 12 phthalates in cosmetic
samples ready for analytical injection
Data Limite: 2013-06-10
TC 393
prEN 14125:2013
Thermoplastic and flexible metal pipework for underground
installation at petrol filling stations
Data Limite: 2013-03-31
TC 393
prEN 16342:2013
Cosmetics Analysis of cosmetic products - Quantitative
determination of zinc pyrithione, piroctone olamine and
climbazole in surfactant containing cosmetic
anti-dandruff products
Data Limite: 2013-03-24
TC 397
prEN 16500:2012
Machines for compacting waste materials or recyclable
fractions Vertical baling presses Safety requirements
Data Limite: 2013-03-11
TC 406
prCEN/TS 16524:2013
Mechanical products Methodology for optimising
environmental impacts in product design and
development
Data Limite: 2013-05-07
TC 407
prEN 13906-1:2012
Cylindrical helical springs made from round wire and
bar Calculation and design Part 1 : Compression springs
Data Limite: 2013-04-29
TC 407
prEN 13906-2:2012
Cylindrical helical springs made from round wire and bar
Calculation and design Part 2: Extension springs
Data Limite: 2013-04-15
TC 410
prEN ISO 18323:2013
Jewellery Consumer confidence in the diamond industry
(ISO/DIS 18323:2013)
Data Limite: 2013-07-07
TC CSC01
prEN ISO 3218:2013
Essential oils Principles of nomenclature
(ISO/DIS 3218:2013)
Data Limite: 2013-06-24
TC CST01
prEN ISO 6185-3:2013
Inflatable boats Part 3: Boats with a maximum motor
power rating of 15 kW and greater
(ISO/DIS 6185-3:2013)
Data Limite: 2013-07-14
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 49 15 março 2013

DOCUMENTOS
normativos
TC CST01
prEN ISO 7840:2013
Small craft Fire-resistant fuel hoses
(ISO/FDIS 7840:2013)
Data Limite: 2013-05-07
TC CST01
prEN ISO 8469:2013
Small craft Non-fire-resistant fuel hoses
(ISO/FDIS 8469:2013)
Data Limite: 2013-05-07
TC CSC01
EN ISO 8589:2010 /prA 1:2013
Sensory analysis General guidance for the design of test
rooms
(ISO 8589:2010/DAM 1:2013)
Data Limite: 2013-06-10
TC CST01
prEN ISO 9094:2012
Small craft Fire protection
(ISO/DIS 9094:2012)
Data Limite: 2013-04-15
TC CST01
prEN ISO 10088:2013
Small craft Permanently installed fuel systems
(ISO/FDIS 10088:2013)
Data Limite: 2013-05-07
TC CSF01
prEN ISO 10628-1:2013
Diagrams for the chemical and petrochemical industry
Part 1: Specification of diagrams (
ISO/DIS 10628-1:2013)
Data Limite: 2013-07-07
TC CST01
EN ISO 12215-5:2008 /prA 1:2012
Small craft Hull construction and scantlings Part 5:
Design pressures for monohulls, design stresses,
scantlings determination
Amendment 1
(ISO 12215-5:2008/DAM 1:2012)
Data Limite: 2013-03-04
TC CST01
prEN ISO/IEC 16315:2012
Small craft Electric propulsion system
(ISO/IEC/DIS 16315:2012)
Data Limite: 2013-03-25
TC CSM11
prEN ISO 3326:2013
Hardmetals Determination of (the magnetization)
coercivity
(ISO/FDIS 3326:2013)
Data Limite: 2013-05-21
TC CSM11
prEN ISO 4491-4:2012
Metallic powders Determination of oxygen content by
reduction methods Part 4: Total oxygen by
reductionextraction
(ISO/FDIS 4491-4:2012)
Data Limite: 2013-03-01
TC CSF17
prEN ISO 3166-1:2013
Codes for the representation of names of countries and
their subdivisions Part 1: Country codes
(ISO/FDIS 3166-1:2013)
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
Data Limite: 2013-05-28
TC CSN21
prEN ISO 13686:2013
Natural gas Quality designation
(ISO/FDIS 13686:2013)
Data Limite: 2013-04-28
TC JW001
prEN 16247-2:2012
Energy audits Part 2: Buildings
Data Limite: 2013-03-04
TC JW001
prEN 16247-3:2012
Energy audits Part 3: Processes
Data Limite: 2013-03-04
TC JW001
prEN 16247-4:2012
Energy audits Part 4: Transport
Data Limite: 2013-03-04
TC JT003
EN 1041:2008 /prA 1:2013
Information supplied by the manufacturer of medical
devices
Data Limite: 2013-06-10
TC ECISS/101
prEN ISO 6506-1:2013
Metallic materials Brinell hardness test Part 1: Test
method
(ISO/DIS 6506-1:2013)
Data Limite: 2013-08-07
TC ECISS/101
prEN ISO 6506-2:2013
Metallic materials Brinell hardness test Part 2:
Verification and calibration of testing machines
(ISO/DIS 6506-2:2013)
Data Limite: 2013-08-07
TC ECISS/101
prEN ISO 6506-3:2013
Metallic materials Brinell hardness test Part 3:
Calibration of reference blocks
(ISO/DIS 6506-3:2013)
Data Limite: 2013-08-07
TC ECISS/101
prEN ISO 6506-4:2013
Metallic materials Brinell hardness test Part 4: Table of
hardness values
(ISO/DIS 6506-4:2013)
Data Limite: 2013-08-07
TC ECISS/101
prEN ISO 16808:2013
Metallic materials Sheet and strip Determination of
biaxial stress-strain curve by means of bulge test with
optical measuring systems (ISO/DIS 16808:2013)
Data Limite: 2013-06-10
TC ECISS/101
prEN ISO 16859-1:2013
Metallic materials Leeb hardness test Part 1: Test method
(ISO/DIS 16859-1:2013)
Data Limite: 2013-08-07
TC ECISS/101
prEN ISO 16859-2:2013
Metallic materials Leeb hardness test Part 2: Verification
and calibration of the testing devices
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 50 15 março 2013

DOCUMENTOS
normativos
(ISO/DIS 16859-2:2013)
Data Limite: 2013-08-07
TC ECISS/101
prEN ISO 16859-3:2013
Metallic materials Leeb hardness test Part 3: Calibration
of reference test blocks
(ISO/DIS 16859-3:2013)
Data Limite: 2013-08-07
TC ECISS/108
prEN 10107:2013
Grain-oriented electrical steel strip and sheet delivered in
the fully processed state
Data Limite: 2013-04-07
TC ECISS/109
prEN 10049:2013
Measurement of roughness average Ra and peak count RPc
on metallic flat products
Data Limite: 2013-07-28
TC ECISS/109
prEN 10209:2013
Cold rolled low carbon steel flat products for vitreous
enamelling Technical delivery conditions
Data Limite: 2013-03-10
TC ECISS/110
prEN 10357:2013
Austenitic, austenitic-ferritic and ferritic longitudinally
welded stainless steel tubes for the food and chemical
industry
Data Limite: 2013-04-07
TC ECISS/110
prEN 10358:2013
Unalloyed steel plumbing fittings Fittings with press ends
for unalloyed steel tubes
Data Limite: 2013-04-07
TC ECISS/111
prEN 10222-1:2012
Steel forgings for pressure purposes Part 1: General
requirements
Data Limite: 2013-05-13
TC ECISS/111
prEN 10222-2:2012
Steel forgings for pressure purposes Part 2: Ferritic and
martensitic steels with specified elevated temperatures
properties
Data Limite: 2013-05-13
TC ECISS/111
prEN 10222-3:2012
Steel forgings for pressure purposes Part 3: Nickel steels
with specified low temperature properties
Data Limite: 2013-05-13
TC ECISS/111
prEN 10222-4:2012
Steel forgings for pressure purposes Part 4: Weldable fine
grain steels with high proof strength
Data Limite: 2013-05-13
TC ECISS/111
prEN 10222-5:2012
Steel forgings for pressure purposes Part 5: Martensitic,
austenitic and ferritic-austenitic stainless steels
Data Limite: 2013-05-13
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
TC ECISS/111
prEN 10228-1:2012
Non-destructive testing of steel forgings Part 1: Magnetic
particle inspection
Data Limite: 2013-04-22
TC ECISS/111
prEN 10228-2:2012
Non-destructive testing of steel forgings Part 2: Penetrant
testing
Data Limite: 2013-04-22
TC ECISS/111
prEN 10228-3:2012
Non-destructive testing of steel forgings Part 3: Ultrasonic
testing of ferritic or martensitic steel forgings
Data Limite: 2013-04-22
TC ECISS/111
prEN 10228-4:2012
Non-destructive testing of steel forgings Part 4: Ultrasonic
testing of austenitic and austenitic-ferritic stainless steel
forgings
Data Limite: 2013-04-22
TC AECMA
prEN 2043:2013
Aerospace series Metallic materials General requirements
for semi-finished product qualification (excluding
forgings and castings)
Data Limite: 2013-04-07
TC AECMA
prEN 2565:2013
Aerospace series Preparation of carbon fibre reinforced
resin panels for test purposes
Data Limite: 2013-04-07
TC AECMA
prEN 2833-005:2013
Aerospace series Glass fibre thermosetting
preimpregnates - Technical specification Part 005: Glass
fabric/phenolic resin preimpregnate
Data Limite: 2013-04-07
TC AECMA
prEN 3682-001:2013
Aerospace series Connectors, plug and receptacle,
electrical, rectangular, interchangeable insert type, rack
to panel, operating temperature 150 °C continuous Part
001: Technical specification
Data Limite: 2013-04-07
TC AECMA
prEN 3682-002:2013
Aerospace series Connectors, plug and receptacle,
electrical, rectangular, interchangeable insert type,
rack to panel, operating temperature 150 °C continuous
Part 002: Specification of performance and contact
arrangements
Data Limite: 2013-04-07
TC AECMA
prEN 3783:2013
Aerospace series Fibre composite materials
Normalisation of fibre dominated mechanical properties
Data Limite: 2013-04-07
TC AECMA
prEN 4162:2013
Aerospace series Heat resisting alloy FE-PA4901
(X12CrNiCoMoW21-20) - As forged Forging stock - a
or D

DOCUMENTOS
normativos
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
TC AECMA
prEN 4163:2013
Aerospace series Heat resisting alloy FE-PA4901
(X12CrNiCoMoW21-20) - As forged Forging stock - a
or D

Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
5.2 Questionários preliminares
Lista de documentos de referência (RD) objeto de Questionários Preliminares (PQ), com vista à sua
aceitação como normas europeias.
LISTA VAZIA
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 53 15 março 2013

Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
5.3 Comités Técnicos do CEN
Lista dos Comités Técnicos do Comité Europeu de Normalização (CEN) em relação aos quais não
existe ONS (Organismo de Normalização Setorial) ou CT (Comissão Técnica) e cujos processos se
encontram disponíveis para consulta no IPQ.
AECMA
European association of aerospace
manufacturers
CEN/TC 12
Materials, equipment and offshore structures
for petroleum and natural gas industries
CEN/TC 44
Household refrigerating appliances and
commercial refrigerated cabinets
CEN/TC 50
Lighting columns and spigots
CEN/TC 53
Temporary works equipment
CEN/TC 87
Gas fuelled smokers lighters
CEN/TC 88
Thermal insulating materials and products
CEN/TC 89
Thermal performance of buildings and
building components
CEN/TC 99
Wallcoverings
CEN/TC 105
Valves and fittings to equip radiators
CEN/TC 107
Pre-fabricated district heating pipe systems
CEN/TC 113
Heat pumps and air conditioning units
CEN/TC 123
Lasers and laser related equipment
CEN/TC 125
Masonry
CEN/TC 128
Roof covering products for discontinuous
laying and products for wall cladding
CEN/TC 130
Space heating appliances without integral
heat sources
CEN/TC 135
Execution of steel structures
CEN/TC 136
Sports, playground and other recreational
equipment
CEN/TC 145
Rubber and plastics machines - Safety
CEN/TC 146
Packaging machines - Safety
CEN/TC 148
Continuous handling equipment and systems
- Safety
CEN/TC 149
Rail-dependent storage and retrieval
equipment - Safety
CEN/TC 150
Industrial trucks - Safety
CEN/TC 151
Construction equipment and building
material machines - Safety
CEN/TC 152
Fairground and amusement park machinery
and structures - Safety
CEN/TC 153
Food processing machinery - Safety and
hygiene specifications
CEN/TC 156
Ventilation for buildings
CEN/TC 163
Sanitary appliances
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 54 15 março 2013

DOCUMENTOS
normativos
CEN/TC 166
Chimneys
CEN/TC 167
Structural bearings
CEN/TC 169
Lighting applications
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
CEN/TC 197
Pumps
CEN/TC 198
Printing and paper machinery - Safety
CEN/TC 200
Tannery machinery - Safety
CEN/TC 171
Heat cost allocation
CEN/TC 173
Brushware
CEN/TC 176
Heat meters
CEN/TC 177
Prefabricated reinforced components of
autoclaved aerated concrete or light-weight
aggregate concrete with open structure
CEN/TC 178
Paving units and kerbs
CEN/TC 182
Refrigerating systems, safety and
environmental requirements
CEN/TC 183
Waste management
CEN/TC 186
Industrial thermoprocessing - Safety
CEN/TC 188
Conveyor belts
CEN/TC 189
Geotextiles and geotextile-related products
CEN/TC 190
Foundry technology
CEN/TC 193
Adhesives
CEN/TC 195
Air filters for general air cleaning
CEN/TC 196
Machines for underground mines - Safety
CEN/TC 201
Leather and imitation leather goods and
footwear manufacturing machinery - Safety
CEN/TC 202
Foundry machinery
CEN/TC 216
Chemical disinfectants and antiseptics
CEN/TC 217
Surfaces for sport areas
CEN/TC 219
Cathodic protection
CEN/TC 221
Metallic shop-fabricated tanks
CEN/TC 222
Feather and down as filling material for any
article, as well as finished articles filled with
feather and down
CEN/TC 225
Bar coding
CEN/TC 226
Road equipment
CEN/TC 232
Compressors - Safety
CEN/TC 239
Rescue systems
CEN/TC 241
Gypsum and gypsum based products
CEN/TC 242
Safety requirements for passenger
transportation by rope
CEN/TC 245
Leisure accommodation vehicles
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 55 15 março 2013

DOCUMENTOS
normativos
CEN/TC 247
Controls for mechanical building services
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
CEN/TC 291
Self-service shopping trolleys
CEN/TC 253
Self adhesive tapes
CEN/TC 256
Railway applications
CEN/TC 259
Medical alarms and signals
CEN/TC 263
Secure storage of cash, valuables and data
media
CEN/TC 270
Internal combustion engines
CEN/TC 271
Surface treatment equipment - Safety
CEN/TC 273
Logistics
CEN/TC 274
Aircraft ground support equipment
CEN/TC 277
Suspended ceilings
CEN/TC 278
Road transport and traffic telematics
CEN/TC 279
Value management - Value analysis,
functional analysis
CEN/TC 280
Offshore containers
CEN/TC 283
Precious metals - Application in jewellery and
associated products
CEN/TC 288
Execution of special geotechnical works
CEN/TC 289
Leather
CEN/TC 293
Technical aids for disabled persons
CEN/TC 296
Tanks for transport of dangerous goods
CEN/TC 297
Free-standing industrial chimneys
CEN/TC 301
Electrically propelled road vehicles
CEN/TC 303
Floor screeds and in-situ floorings in buildings
CEN/TC 305
Potencially explosive atmospheres - Explosion
prevention and protection
CEN/TC 309
Footwear
CEN/TC 310
Advanced manufacturing technologies
CEN/TC 313
Industrial centrifugs - Safety requirements
(provisional)
CEN/TC 314
Mastic asphalt for waterproofing
CEN/TC 315
Spectator accomodations
CEN/TC 317
Derivates from coal from pyrolisis
CEN/TC 318
Hydrometry
CEN/TC 320
Transportation services
CEN/TC 322
Equipment for metal production and rolling
mills - Safety requirements
CEN/TC 290
Dimensional and geometrical product
specification and verification
CEN/TC 323
Raised access floors
CEN/TC 324
Castors and wheels
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 56 15 março 2013

DOCUMENTOS
normativos
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
CEN/TC 325
Prevention of crime by urban planning and
building design (provisional)
CEN/TC 326
Gas supply for natural gas vehicles (NGV)
CEN/TC 328
Standard measuring system for cleaning
performance
CEN/TC 329
Criteria for describing tourist services in
objective tourist information systems
CEN/TC 332
Laboratory equipment (provisional)
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 57 15 março 2013

Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
6. Projetos de normas e propostas de estudo de novas normas do Comité Europeu
de Normalização Eletrotécnica (CENELEC)
Os projetos de normas e propostas de estudo de novas normas estão organizadas por Comités
Técnicos do CENELEC.
6.1 Projetos em inquérito público
Para cada referência menciona-se a designação codificada, o título e a data limite para a
apresentação de comentários.
SC 9XB
FprTS 50546:2012
Railway applications - Rolling stock - 3-phase shore
(external) supply system for rail vehicles
Data Limite: 2013-03-08
SC 9XC
EN 50123-6:2003 /prA A:2013
Railway applications - Fixed installations - D.C.
switchgear Part 6:D.C. switchgear assemblies
Data Limite: 2013-08-09
SC 9XA
FprEN 50578:2013
Railways applications - Direct current signalling relays
Data Limite: 2013-04-12
SC 46XA
EN 50117-1:2002 /FprAB :2013
Coaxial cables Part 1:Generic specification
Data Limite: 2013-05-10
SC 46XA
EN 50117-2-1:2005 /FprAB :2013
Coaxial cables Part 2-1:Sectional specification for
cables used in cabled distribution networks - Indoor
drop cables for systems operating at 5 MHz - 1 000 MHz
Data Limite: 2013-05-24
SC 46XA
EN 50117-2-2:2004 /FprAB :2013
Coaxial cables Part 2-2: Sectional specification for
cables used in cabled distribution networks - Outdoor
drop cables for systems operating at 5 MHz - 1 000 MHz
Data Limite: 2013-05-24
SC 46XA
EN 50117-2-3:2004 /FprA C:2013
Coaxial cables Part 2-3:Sectional specification for
cables used in cabled distribution networks -
Distribution and trunk cables for systems operating at
5 MHz - 1 000 MHz
Data Limite: 2013-05-24
SC 46XA
EN 50117-2-4:2004 /FprAB :2013
Coaxial cables Part 2-4:Sectional specification for
cables used in cabled distribution networks - Indoor
drop cables for systems operating at 5 MHz - 3 000 MHz
Data Limite: 2013-05-24
SC 46XA
EN 50117-2-5:2004 /FprA :2013
Coaxial cables Part 2-5:Sectional specification for
cables used in cabled distribution networks - Outdoor
drop cables for systems operating at 5 MHz - 3 000 MHz
Data Limite: 2013-05-24
SC 46XA
EN 50117-4-1:2008 /FprA A:2013
Coaxial cables Part 4-1:Sectional specification for
cables for BCT cabling in accordance with EN 50173 -
Indoor drop cables for systems operating at 5 MHz - 3
000 MHz
Data Limite: 2013-05-10
SC 46XA
FprEN 61726:2013
Cable assemblies, cables, connectors and passive
microwave components - Screening attenuation
measurement by the reverberation chamber method
(IEC 61726:201X)
Data Limite: 2013-05-17
SC 31-9
FprEN 60079-29-2:2013
Explosive atmospheres Part 29-2: Gas detectors -
Selection, installation, use and maintenance of
detectors for flammable gases and oxygen
(IEC 60079-29-2:201X)
Data Limite: 2013-04-12
SR 3D
FprEN 62656-3:2013
Standardized product ontology register and transfer by
spreadsheets Part 3:Interface for Common Information
Model
(IEC 62656-3:201X)
Data Limite: 2013-05-17
SR 4
FprEN 62364:2013
Hydraulic machines - Guide for dealing with
hydro-abrasive erosion in Kaplan, Francis and Pelton
turbines
(IEC 62364:201X)
Data Limite: 2013-05-10
SR 7
FprEN 62641:2013
Conductors for overhead lines - Aluminium and aluminium
alloy wires for concentric lay stranded conductors
(IEC 62641:201X)
Data Limite: 2013-04-05
SR 15
FprEN 60455-2:2012
Resin based reactive compounds used for electrical
insulation Part 2: Methods of test
(IEC 60455-2:201X)
Data Limite: 2013-03-15
SR 15
FprEN 60455-3-8:2013
Resin based reactive compounds used for electrical
insulation Part 3:Specifications for individual
materials Sheet 8:Resinous compounds for cable
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 58 15 março 2013

DOCUMENTOS
normativos
accessories
(IEC 60455-3-8:201X)
Data Limite: 2013-04-05
SR 15
FprEN 60684-3-284:2013
Flexible insulating sleeving Part 3:Specifications for
individual types of sleeving Sheet 284:Heat-shrinkable,
sleevings, for oil barrier applications
(IEC 60684-3-284:201X)
Data Limite: 2013-05-10
SR 15
FprEN 60684-3-285:2013
Flexible insulating sleeving
Part 3:Specifications for individual types of sleeving
Sheet 285:Heat-shrinkable polyolefin sleeving, for
medium voltage joint insulation
(IEC 60684-3-285:201X)
Data Limite: 2013-05-10
SR 15
FprEN 61212-3-1:2013
Insulating materials - Industrial rigid round laminated
tubes and rods based on thermosetting resins for
electrical purposes Part 3: Specifications for individual
materials Sheet 1: Round laminated rolled tubes
(IEC 61212-3-1:201X)
Data Limite: 2013-04-05
SR 15
FprEN 61212-3-2:2013
Insulating materials - Industrial rigid round laminated
tubes and rods based on thermosetting resins for
electrical purposes Part 3:Specifications for individual
materials Sheet 2:Round laminated moulded tubes
(IEC 61212-3-2:201X)
Data Limite: 2013-04-05
SR 17D
FprEN 61439-7:2013
Low-voltage switchgear and controlgear assemblies Part
7:Assemblies for specific installations at public sites
such as marinas, camping sites, market squares;
electrical vehicles charging stations
(IEC 61439-7:201X)
Data Limite: 2013-04-05
SR 27
FprEN 60519-12:2013
Safety in electroheating installations Part 12:Particular
requirements for infrared electroheating installations
(IEC 60519-12:201X)
Data Limite: 2013-03-29
SR 27
FprEN 62693:2012
Industrial electroheating installations - Test methods for
infrared electroheating installations
(IEC 62693:201X)
Data Limite: 2013-03-01
SR 28
FprEN 60071-5:2013
Insulation co-ordination Part 5:Procedures for
high-voltage direct current (HVDC) converter stations
(IEC 60071-5:201X)
Data Limite: 2013-05-03
SR 29
FprEN 60318-3:2013
Electroacoustics - Simulators of human head and ear Part
3: Acoustic coupler for the calibration of supra-aural
earphones used in audiometry
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
(IEC 60318-3:201X)
Data Limite: 2013-04-12
SR 33
EN 60252-1:2011 /FprA 1:2012
AC motor capacitors Part 1:General - Performance, testing
and rating - Safety requirements - Guidence for
installation and operation
(IEC 60252-1:2010/A1:201X)
Data Limite: 2013-03-01
SR 33
EN 60252-2:2011 /FprA 1:2012
AC motor capacitors Part 2:Motor start capacitors
(IEC 60252-2:2010/A1:201X)
Data Limite: 2013-03-01
SR 34A
EN 60630:1998 /FprA 7:2013
Maximum lamp outlines for incandescent lamps
(IEC 60630:1994/A7:201X)
Data Limite: 2013-04-19
SR 34A
FprEN 62776:2013
Double-capped LED lamps for general lighting services -
Safety specifications
(IEC 62776:201X)
Data Limite: 2013-05-24
SR 37
FprEN 60099-5:2013
Surge arresters Part 5:Selection and application
recommendations
(IEC 60099-5:201X)
Data Limite: 2013-04-19
SR 37B
FprEN 61643-312:2013
Components for low-voltage surge protective devices Part
312:Selection and application principles for gas
discharge tubes
(IEC 61643-312:201X)
Data Limite: 2013-03-22
SR 40
FprEN 60286-3:2013
Packaging of components for automatic handling Part
3:Packing of surface mount components on continuous
tapes
(IEC 60286-3:201X)
Data Limite: 2013-04-26
SR 47E
FprEN 60747-16-5:2013
Semiconductor devices Part 16-5:Microwave integrated
circuits - Oscillators
(IEC 60747-16-5:201X)
Data Limite: 2013-05-03
SR 47
FprEN 60749-28:2013
Semiconductor devices - Mechanical and climatic test
methods Part 28:Electrostatic Discharge (ESD)
Sensitivity Testing Direct contact charged device
model (DC-CDM)
(IEC 60749-28:201X)
Data Limite: 2013-06-14
SR 48D
FprEN 61587-5:2013
Mechanical structures for electronic equipment - Tests
for IEC 60917 and IEC 60297
Part 5:Seismic tests for chassis, subracks, and plug-in
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 59 15 março 2013

DOCUMENTOS
normativos
units
(IEC 61587-5:201X)
Data Limite: 2013-06-14
SR 49
FprEN 62761:2012
Guidelines for the measurement method of nonlinearity
for surface acoustic wave (SAW) and bulk acoustic wave
(BAW) devices in radio frequency (RF)
(IEC 62761:201X)
Data Limite: 2013-03-01
SR 56
FprEN 61710:2013
Power law model - Goodness-of-fit tests and estimation
methods
(IEC 61710:201X)
Data Limite: 2013-04-19
SR 56
FprEN 62198:2013
Managing risk in projects - Application guidelines
(IEC 62198:201X)
Data Limite: 2013-05-10
SR 80
FprEN 61996-1:2013
Maritime navigation and radiocommunication equipment
and systems - Shipborne voyage data recorder (VDR) Part
1:Voyage data recorder (VDR) - Performance
requirements, methods of testing and required test results
(IEC 61996-1:201X)
Data Limite: 2013-04-19
SR 80
FprEN 62065:2012
Maritime navigation and radiocommunication equipment
and systems - Track control systems - Operational and
performance requirements, methods of testing and
required test results
(IEC 62065:201X)
Data Limite: 2013-03-08
SR 80
EN 62287-1:2011 /FprA 1:2012
Maritime navigation and radiocommunication equipment
and systems - Class B shipborne equipment of the
automatic identification system (AIS) Part
1:Carrier-sense time division multiple access (CSTDMA)
techniques
(IEC 62287-1:2010/A1:201X)
Data Limite: 2013-03-01
SR 85
FprEN 61557-14:2013
Electrical safety in low voltage distribution systems up
to 1 000 V a.c and 1 500 V d.c - Equipment for testing,
measuring or monitoring of protective measures Part 14:
Equipment for testing the safety of electrical equipment
of machinery
(IEC 61557-14:201X)
Data Limite: 2013-03-15
SR 85
FprEN 62638:2013
Recurrent test and test after repair
(IEC 62638:201X)
Data Limite: 2013-05-10
SR 87
EN 62127-3:2007 /FprA 1:2013
Ultrasonics - Hydrophones Part 3:Properties of
hydrophones for ultrasonic fields up to 40 MHz
(IEC 62127-3:2007/A1:201X)
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
Data Limite: 2013-05-03
SR 89
FprEN 60695-1-11:2013
Fire hazard testing Part 1-11:Guidance for assessing the
fire hazard of electrotechnical products - Fire hazard
assessment
(IEC 60695-1-11:201X)
Data Limite: 2013-05-24
SR 89
FprEN 60695-2-10:2013
Fire hazard testing Part 2-10: Glowing/hot-wire based
test methods - Glow-wire apparatus and common test
procedure
(IEC 60695-2-10:201X)
Data Limite: 2013-03-15
SR 89
FprEN 60695-9-1:2013
Fire hazard testing Part 9-1:Surface spread of flame -
General guidance
(IEC 60695-9-1:201X)
Data Limite: 2013-04-05
SR 89
FprEN 60695-11-10:2013
Fire hazard testing Part 11-10:Test flames - 50 W
horizontal and vertical flame test methods
(IEC 60695-11-10:201X)
Data Limite: 2013-04-12
SR 90
FprEN 61788-5:2013
Superconductivity Part 5:Matrix to superconductor
volume ratio measurement - Copper to superconductor
volume ratio of Cu/Nb-Ti composite superconducting
wires
(IEC 61788-5:201X)
Data Limite: 2013-05-10
SR 91
FprEN 61189-11:2013
Test methods for electrical materials, interconnection
structures and assemblies Part 11:Measurement of melting
temperature or melting temperature ranges of solder
alloys
(IEC 61189-11:201X)
Data Limite: 2013-04-12
SR 91
FprEN 61191-1:2013
Printed board assemblies Part 1:Generic specification -
Requirements for soldered electrical and electronic
assemblies using surface mount and related assembly
technologies
(IEC 61191-1:201X)
Data Limite: 2013-04-26
SR 91
FprEN 62588:2013
Marking and labeling of components, PCBs and PCBAs to
identify lead (Pb), lead-free (Pb-Free) and other
attributes
(IEC 62588:201X)
Data Limite: 2013-04-19
SR 91
FprEN 62699:2013
Mapping rules and exchange methods for heterogeneous
parts libraries
(IEC 62699:201X)
Data Limite: 2013-05-10
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 60 15 março 2013

DOCUMENTOS
normativos
SR 95
FprEN 60255-26:2013
Measuring relays and protection equipment Part
26:Electromagnetic compatibility requirements
(IEC 60255-26:201X)
Data Limite: 2013-04-26
SR 100
FprEN 61938:2013
Multimedia systems - Guide to the recommended
characteristics of analogue interfaces to achieve
interoperability
(IEC 61938:201X)
Data Limite: 2013-05-03
SR 101
FprEN 61340-4-6:2013
Electrostatics Part 4-6:Standard test methods for specific
applications - Wrist straps
(IEC 61340-4-6:201X)
Data Limite: 2013-04-26
SR 104
FprEN 60068-2-57:2013
Environmental testing Part 2-57:Tests - Test Ff:
Vibration - Time-history method
(IEC 60068-2-57:201X)
Data Limite: 2013-03-29
SR 110
FprEN 62629-12-1:2013
3D display devices Part 12-1:Measuring methods for
stereoscopic displays using glasses - Optical
(IEC 62629-12-1:201X)
Data Limite: 2013-05-17
SR 110
FprEN 62715-1-1:2013
Flexible display devices Part 1-1:Terminology and letter
symbols
(IEC 62715-1-1:201X)
Data Limite: 2013-06-14
SR 112
FprEN 60243-1:2013
Electrical strength of insulating materials - Test methods
Part 1: Tests at power frequencies
(IEC 60243-1:201X)
Data Limite: 2013-03-15
TC 2
FprEN 60034-2-1:2013
Rotating electrical machines Part 2-1: Standard methods
for determining losses and efficiency from tests
(excluding machines for traction vehicles)
(IEC 60034-2-1:201X)
Data Limite: 2013-04-05
TC 9X
prEN 50126-1:2012
Railway applications -The Specification and
Demonstration of Reliability, Availability,
Maintainability and Safety (RAMS) Part 1:Generic
RAMS process
Data Limite: 2013-03-29
TC 9X
prEN 50126-2:2012
Railway applications - The Specification and
Demonstration of Reliability, Availability,
Maintainability and Safety (RAMS) Part 2:Systems
approach to safety
Data Limite: 2013-03-29
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
TC 9X
prEN 50126-4:2012
Railway applications - The Specification and
Demonstration of Reliability, Availability,
Maintainability and Safety (RAMS) Part 4:Functional
safety - Electrical/Electronic/Programmable electronic
systems
Data Limite: 2013-03-29
TC 9X
prEN 50126-5:2012
Railway applications - The Specification and
Demonstration of Reliability, Availability,
Maintainability and Safety (RAMS) Part 5:Functional
Safety - Software
Data Limite: 2013-03-29
TC 13
FprEN 62056-5-3:2013
Electricity metering data exchange - The DLMS/COSEM
Suite Part 5-3:DLMS/COSEM application layer
(IEC 62056-5-3:201X)
Data Limite: 2013-04-19
TC 13
FprEN 62056-6-1:2013
Electricity metering data exchange - The DLMS/COSEM
suite Part 6-1:Object Identification System (OBIS)
(IEC 62056-6-1:201X)
Data Limite: 2013-04-19
TC 13
FprEN 62056-6-2:2013
Electricity metering data exchange - The DLMS/COSEM
suite Part 6-2:COSEM interface classes
(IEC 62056-6-2:201X)
Data Limite: 2013-04-19
TC 13
FprEN 62056-7-6:2013
Electricity metering data exchange - The DLMS/COSEM
suite Part 7-6:The 3-layer connection-oriented HDLC
based commmunication profile
(IEC 62056-7-6:201X)
Data Limite: 2013-04-19
TC 13
FprEN 62056-8-3:2013
Electricity metering data exchange - The DLMS/COSEM
suite Part 8-3:The PLC S-FSK communication profile
for neighbourhood networks
(IEC 62056-8-3:201X)
Data Limite: 2013-04-19
TC 13
FprEN 62056-9-7:2013
Electricity metering data exchange - The DLMS/COSEM
suite Part 9-7: Communication profile for TCP-UDP/IP
networks
(IEC 62056-9-7:201X)
Data Limite: 2013-03-15
TC 14
FprEN 50541:2012
Three phase dry-type distribution transformers 50 Hz,
from 100 kVA to 3150 kVA, with highest voltage for
equipment not exceeding 36 kV Part 2:Determination of
the power rating of a transformer loaded with
non-sinusoidal current
Data Limite: 2013-03-08
TC 14
FprEN 60076-3:2013
Power transformers Part 3:Insulation levels, dielectric
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 61 15 março 2013

DOCUMENTOS
normativos
tests and external clearances in air
(IEC 60076-3:201X)
Data Limite: 2013-05-03
TC 17B
EN 60947-1:2007 /FprA 2:2013
Low-voltage switchgear and controlgear Part 1:General
rules
(IEC 60947-1:2007/A2:201X)
Data Limite: 2013-05-24
TC 17B
EN 60947-4-3:2000 /FprA 3:2013
Low-voltage switchgear and controlgear Part 4-3:
Contactors and motor-starters - AC semiconductor
controllers and contactors for non-motor loads
(IEC 60947-4-3:1999/A3:201X)
Data Limite: 2013-05-10
TC 17AC
EN 62271-109:2009 /FprA 1:2013
High-voltage switchgear and controlgear Part
109:Alternating-current series capacitor by-pass switches
(IEC 62271-109:2008/A1:201X)
Data Limite: 2013-05-03
TC 20
FprEN 50355:2012
Railway applications - Railway rolling stock cables
having special fire performance - Guide to use
Data Limite: 2013-05-24
TC 20
EN 50382-1:2008 /FprA A:2012
Railway applications - Railway rolling stock high
temperature power cables having special fire
performance Part 1: General requirements
Data Limite: 2013-03-22
TC 20
EN 50382-2:2008 /FprA A:2012
Railway applications - Railway rolling stock high
temperature power cables having special fire performance
Part 2: Single core silicone rubber insulated cable for
120 ºC or 150 ºC
Data Limite: 2013-03-22
TC 20
EN 62230:2007 /FprA 1:2013
Electric cables - Spark-test method
(IEC 62230:2006/A1:201X)
Data Limite: 2013-05-10
TC 21X
FprEN 61427-1:2013
Secondary cells and batteries for renewable energy
storage - General requirements and methods of test Part
1:Photovoltaic Off-grid application
(IEC 61427-1:201X)
Data Limite: 2013-04-12
TC 22X
FprEN 62040-4:2013
Uninterruptible power systems (UPS) Part 4:
Environmental aspects - Requirements and reporting
(IEC 62040-4:201X)
Data Limite: 2013-04-05
TC 23BX
FprEN 62196-3:2013
Plugs, socket-outlets and vehicle couplers - conductive
charging of electric vehicles Part 3: Dimensional
compatibility and interchangeability requirements for d.c.
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
and a.c./d.c. pin and tube-tyoe contact vehicle couplers
(IEC 62196-3:201X)
Data Limite: 2013-04-12
TC 26A
FprEN 60974-5:2013
Arc welding equipment Part 5:Wire feeders
(IEC 60974-5:201X)
Data Limite: 2013-05-03
TC 31
FprEN 60079-18:2013
Explosive atmospheres Part 18:Equipment protection by
encapsulation ""m""
(IEC 60079-18:201X)
Data Limite: 2013-06-07
TC 31
FprEN 60079-26:2013
Explosive atmospheres Part 26: Equipment with
equipment protection level (EPL) Ga
(IEC 60079-26:201X)
Data Limite: 2013-04-12
TC 34Z
EN 60061-1:1993 /FprA 50:2013
Lamp caps and holders together with gauges for the
control of interchangeability and safety Part 1: Lamp
caps
(IEC 60061-1:1969/A50:201X)
Data Limite: 2013-04-12
TC 34Z
EN 60061-1:1993 /FprA 51:2013
Lamp caps and holders together with gauges for the
control of interchangeability and safety Part 1:Lamp
caps
(IEC 60061-1:1969/A51:201X)
Data Limite: 2013-05-17
TC 34Z
EN 60061-2:1993 /FprA 47:2013
Lamp caps and holders together with gauges for the
control of interchangeability and safety Part 2:
Lampholders
(IEC 60061-2:1969/A47:201X)
Data Limite: 2013-04-12
TC 34Z
EN 60061-2:1993 /FprA 48:2013
Lamp caps and holders together with gauges for the
control of interchangeability and safety Part
2:Lampholders
(IEC 60061-2:1969/A48:201X)
Data Limite: 2013-05-17
TC 34Z
EN 60061-3:1993 /FprA 48:2013
Lamp caps and holders together with gauges for the
control of interchangeability and safety Part 3: Gauges
(IEC 60061-3:1969/A48:201X)
Data Limite: 2013-04-12
TC 34Z
EN 60061-3:1993 /FprA 49:2013
Lamp caps and holders together with gauges for the
control of interchangeability and safety Part 3:Gauges
(IEC 60061-3:1969/A49:201X)
Data Limite: 2013-05-17
TC 34Z
FprEN 60598-2-8:2013
Luminaires Part 2-8:Particular requirements -
Handlamps
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 62 15 março 2013

DOCUMENTOS
normativos
(IEC 60598-2-8:201X)
Data Limite: 2013-04-12
TC 34Z
FprEN 60598-2-12:2013
Luminaires Part 2-12:Particular requirements - Mains
socket-outlet mounted nightlights
(IEC 60598-2-12:201X)
Data Limite: 2013-04-12
TC 34Z
EN 61347-1:2008 /FprA 3:2013
Lamp controlgear Part 1:General and safety requirements
(IEC 61347-1:2007/A3:201X)
Data Limite: 2013-05-24
TC 34Z
FprEN 62722-1:2013
Luminaire performance Part 1: General Requirements
(IEC 62722-1:201X)
Data Limite: 2013-04-12
TC 36A
EN 50386:2010 /FprA A:2013
Bushings up to 1 kV and from 250 A to 5 kA, for liquid
filled transformers
Data Limite: 2013-05-24
TC 38
FprEN 61869-6:2012
Instruments transformers Part 6: Additional general
requirements for Low Power Instrument Transformers
(IEC 61869-6:201X)
Data Limite: 2013-03-22
TC 40XA
FprEN 60384-14:2013
Fixed capacitors for use in electronic equipment Part
14:Sectional specification: Fixed capacitors for
electromagnetic interference suppression and connection
to the supply mains
(IEC 60384-14:201X)
Data Limite: 2013-04-26
TC 44X
FprEN 60204-31:2013
Safety of machinery - Electrical equipment of machines
Part 31: Particular safety and EMC requirements for
sewing machines, units and systems
(IEC 60204-31:201X)
Data Limite: 2013-03-15
TC 46X
FprEN 50289-3-8:2013
Communication cables - Specifications for test methods
Part 3-8:Mechanical test methods - Abrasion resistance
of cable sheath markings
Data Limite: 2013-08-09
TC 46X
FprEN 50290-2-23:2013
Communication cables Part 2-23:Common design rules and
construction - PE insulation
Data Limite: 2013-08-09
TC 46X
FprEN 50290-2-25:2013
Communication cables Part 2-25:Common design rules
and construction - Polypropylene insulation compounds
Data Limite: 2013-08-09
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
TC 46X
FprEN 50290-4-1:2013
Communication cables Part 4-1:General considerations for
the use of cables - Environmental conditions and safety
aspects
Data Limite: 2013-08-09
TC 46X
FprEN 50290-4-2:2013
Communication cables Part 4-2:General considerations for
the use of cables - Guide to use
Data Limite: 2013-08-09
TC 57
FprEN 61970-301:2013
Energy Management System Application Program
Interface (EMS-API) Part 301:Common Information
Model (CIM) Base
(IEC 61970-301:201X)
Data Limite: 2013-04-12
TC 57
FprEN 61970-456:2013
Energy management system application program
interface (EMS-API) Part 456:Solved power system state
profiles
(IEC 61970-456:201X)
Data Limite: 2013-03-29
TC 57
FprEN 62325-450:2013
Framework for energy market communications Part
450:Profile and context modelling rules
(IEC 62325-450:201X)
Data Limite: 2013-03-22
TC 59X
FprEN 60350-1:2013
Household electric cooking appliances Part 1:Ranges,
ovens, steam ovens and grills - Methods for measuring
performance
(IEC 60350-1:2011+ modif Feb 2012)
Data Limite: 2013-04-26
TC 59X
FprEN 60350-2:2013
Household electric cooking appliances Part 2:Hobs -
Methods for measuring performance
(IEC 60350-2:2011, modif)
Data Limite: 2013-04-26
TC 61
FprEN 50569:2013
Household and similar electrical appliances - Safety -
Particular requirements for commercial electric spin
extractors
Data Limite: 2013-05-03
TC 61
FprEN 50570:2013
Household and similar electrical appliances - Safety -
Particular requirements for commercial electric tumble
dryers
Data Limite: 2013-05-03
TC 61
FprEN 50571:2013
Household and similar electrical appliances - Safety -
Particular requirements for commercial electric washing
machines
Data Limite: 2013-05-03
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 63 15 março 2013

DOCUMENTOS
normativos
TC 61
EN 60335-1:2012 /FprA 1:2013
Household and similar electrical appliances - Safety Part
1: General requirements
(IEC 60335-1:2010/A1:201X) (fragment 9)
Data Limite: 2013-04-26
TC 61
EN 60335-2-3:2011 /FprA A:2013
Household and similar electrical appliances - Safety Part
2-3:Particular requirements for electric irons
Data Limite: 2013-05-24
TC 61
FprEN 60335-2-6:2013
Household and similar electrical appliances - Safety Part
2-6:Particular requirements for stationary cooking
ranges, hobs, ovens and similar appliances
(IEC 60335-2-6:201X)
Data Limite: 2013-04-26
TC 61
EN 60335-2-32:2003 /FprA 2:2013
Household and similar electrical appliances - Safety
Part 2-32:Particular requirements for massage appliances
(IEC 60335-2-32:2002/A2:201X)
Data Limite: 2013-04-26
TC 61
EN 60335-2-58:2005 /FprA C:2013
Household ans similar electrical appliances - Safety
Part 2-58: Particular requirements for commercial
electric dishwashing machines
Data Limite: 2013-04-12
TC 61
EN 60335-2-76:2005 /prA E:2012
Household and similar electrical appliances - Safety Part
2-76: Particular requirements for electric fence
energizers
Data Limite: 2013-03-15
TC 61
EN 60335-2-76:2005 /prA F:2012
Household and similar electrical appliances - Safety Part
2-76: Particular requirements for electric fence
energizers
Data Limite: 2013-03-15
TC 61
EN 60335-2-76:2005 /prA G:2012
Household and similar electrical appliances - Safety Part
2-76: Particular requirements for electric fence
energizers
Data Limite: 2013-03-15
TC 61
EN 60335-2-84:2003 /FprA 2:2013
Household and similar electrical appliances - Safety Part
2-84:Particular requirements for toilets
(IEC 60335-2-84:2002/A2:201X)
Data Limite: 2013-04-26
TC 61
EN 60335-2-89:2010 /FprA A:2013
Household and similar electrical appliances - Safety Part
2-89: Particular requirements for commercial
refrigerating appliances with an incorporated or remote
refrigerant condensing unit or compressor
Data Limite: 2013-05-31
TC 61
EN 60335-2-102:2006 /FprA A:2013
Household and similar electrical appliances - Safety Part
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
2-102:Particular requirements for gas, oil and solid-fuel
burning appliances having electrical connections
Data Limite: 2013-05-24
TC 61
EN 60335-2-105:2005 /FprA 2:2013
Household and similar electrical appliances - Safety Part
2-105:Particular requirements for multifunctional
shower cabinets
(IEC 60335-2-105:2004/A2:201X)
Data Limite: 2013-04-26
TC 61
EN 60335-2-109:2010 /FprA 1:2013
Household and similar electrical appliances - Safety
Part 2-109:Particular requirements for UV radiation
water treatment appliances
(IEC 60335-2-109:2010/A1:201X)
Data Limite: 2013-04-26
TC 62
EN 60601-2-52:2010 /FprA 1:2013
Medical electrical equipment Part 2-52:Particular
requirements for basic safety and essential performance
of medical beds
(IEC 60601-2-52:2009/A1:201X)
Data Limite: 2013-04-26
TC 62
FprEN 60601-2-64:2013
Medical electrical equipment Part 2-64: Particular
requirements for the basic safety and essential
performance of light ion beam medical equipment
(IEC 60601-2-64:201X)
Data Limite: 2013-04-05
TC 62
FprEN 62220-1-1:2013
Medical electrical equipment - Characteristics of
digital X-ray imaging devices Part 1-1:Determination of
the detective quantum efficiency - Detectors used in
radiopgraphic imaging
(IEC 62220-1-1:201X)
Data Limite: 2013-05-24
TC 64
prHD 50573-5-57:2012
Electrical devices coordination
Data Limite: 2013-04-12
TC 64
FprHD 60364-4-443:2013
Low-voltage electrical installations Part 4-44:Protection
for safety - Protection against voltage disturbances and
electromagnetic disturbances Clause 443:Protection
against overvoltages of atmospheric origin or due to
switching
(IEC 60364-4-44:2007/A1:201X)
Data Limite: 2013-04-05
TC 64
FprHD 60364-5-534:2013
Low-voltage electrical installations Part 5-53:Selection
and erection of electrical equipment - Isolation,
switching and control Clause 534:Devices for protection
against overvoltages
(IEC 60364-5-53:2001/A2:201X)
Data Limite: 2013-04-05
TC 64
HD 60364-7-718:2010 /FprA A:2013
Low-voltage electrical installations Part
7-718:Requirements for special installations or
locations - Communal facilities and workplaces
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 64 15 março 2013

DOCUMENTOS
normativos
Data Limite: 2013-04-05
TC 65X
FprEN 61514-2:2013
Industrial Process Control Systems Part 2:Methods of
evaluating the performance of intelligent valve
positioners with pneumatic outputs
(IEC 61514-2:201X)
Data Limite: 2013-05-03
TC 65X
FprEN 61987-12:2012
Industrial Process Measurement and Control - Data
Structures and Elements in Process Equipment Catalogues
Part 12:Lists of properties (LOP for flow measuring
equipment for electronic data exchange
(IEC 61987-12:201X)
Data Limite: 2013-03-01
TC 65X
FprEN 62264-1:2013
Enterprise system integration Part 1: Models and
terminology
(IEC 62264-4:201X)
Data Limite: 2013-03-15
TC 65X
FprEN 62264-2:2013
Enterprise system integration Part 2:Object models and
attributes
(IEC 62264-2:201X)
Data Limite: 2013-05-03
TC 65X
FprEN 62682:2013
Management alarms for the process industries
(IEC 62682:201X)
Data Limite: 2013-04-26
TC 65X
FprEN 62703:2013
Expression of performance of fluorometric oxygen
analyzers in liquid media
(IEC 62703:201X)
Data Limite: 2013-05-03
TC 72
FprEN 60730-2-22:2012
Automatic Electrical Controls for Household and Similar
Use Part 2-22:Particular requirements for thermal motor
protectors
(IEC 60730-2-22:201X)
Data Limite: 2013-03-01
TC 76
FprEN 60825-1:2013
Safety of laser products Part 1: Equipment classification
and requirements
(IEC 60825-1:20X1)
Data Limite: 2013-04-12
TC 78
FprEN 61472:2013
Live working - Minimum approach distances for ac
systems in the voltage range 72,5 kV to 800 kV - A
method of calculation
(IEC 61472:201X)
Data Limite: 2013-03-15
TC 79
FprEN 60839-11-1:2013
Alarm and electronic security systems Part
11-1:Standard for electronic access control systems -
System and components requirements
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
(IEC 60839-11-1:201X)
Data Limite: 2013-03-29
TC 82
EN 50548:2011 /FprA 1:2012
Junction boxes for photovoltaic modules
Data Limite: 2013-03-08
TC 82
prEN 50583:2012
Photovoltaics in building
Data Limite: 2013-03-08
TC 82
FprEN 62817:2013
Solar trackers for photovoltaic systems - Design
qualification
(IEC 62817:201X)
Data Limite: 2013-05-24
TC 86BXA
FprEN 50377-17-1:2013
Connector sets and interconnect components to be used in
optical fibre communication systems - Product
specifications
Part 17-1:Type FPFT (factory polished field
terminated) simplex connector factory terminated with
EN 60793-2-50 category B1.3 fibre and field
mounted onto IEC 60793-2-50 category B1.3 or B6a_1
or B6a_2 singlemode fibre, category C
Data Limite: 2013-07-19
TC 86BXA
prEN 50411-3-5:2013
Fibre organisers and closures to be used in optical fibre
communications systems - Product specifications Part
3-5:Wall outlet
Data Limite: 2013-07-26
TC 86BXA
prEN 50516-3-1:2012
Industrial connector sets and interconnect components
to be used in optical fibre control and communication
systems - Product specifications Part 3-1:Type ODVA
APC terminated on EN 60793-2-50 category B1.1 and
B1.3 singlemode fibre to meet the requirements of
category I (industrial environments) as specified in EN
50173-1 and IEC 61753-1-3
Data Limite: 2013-03-15
TC 86A
FprEN 60794-1-2:2012
Optical fibre cables Part 1-2:Generic specification - Cross
reference table for optical cable test procedures
(IEC 60794-1-2:201X)
Data Limite: 2013-03-01
TC 86A
FprEN 60794-1-20:2012
Optical fibre cables Part 1-20:Generic specification -
Basic optical cable test procedures - General and
Definitions
(IEC 60794-1-20:201X)
Data Limite: 2013-03-01
TC 86A
FprEN 60794-2-51:2013
Optical fibre cables Part 2-51: Indoor optical fibre
cables - Detail specification for simplex and duplex
cables for use in cords for controlled environment
(IEC 60794-2-51:201X)
Data Limite: 2013-04-05
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 65 15 março 2013

DOCUMENTOS
normativos
TC 86A
FprEN 60794-5-10:2013
Optical fibre cables Part 5-10:Family specification for
outdoor microduct optical fibre cables, microducts and
protected microducts for installation by blowing
(IEC 60794-5-10:201X)
Data Limite: 2013-05-10
TC 86A
FprEN 60794-5-20:2013
Optical fibre cables Part 5-20:Family specification for
outdoor microduct fibre units, microduct and protected
microducts for installation by blowing
(IEC 60794-5-20:201X)
Data Limite: 2013-05-10
TC 86BXA
FprEN 61300-2-7:2013
Fibre optic interconnecting devices and passive
components - Basic test and measurement procedures
Part 2-7:Tests - Bending moment
(IEC 61300-2-7:201X)
Data Limite: 2013-03-29
TC 86BXA
FprEN 61300-2-7:2013
Fibre optic interconnecting devices and passive
components - Basic test and measurement procedures
Part 2-7:Tests - Bending moment
(IEC 61300-2-7:201X)
Data Limite: 2013-04-12
TC 86BXA
FprEN 61300-2-15:2013
Fibre optic interconnecting devices and passive
components - Basic test and measurement procedures
Part 2-15:Tests - Torque srength of coupling mechanism
(IEC 61300-2-15:201X)
Data Limite: 2013-05-24
TC 86BXA
FprEN 61300-2-35:2013
Fibre optic interconnecting devices and passive
components - Basic test and measurement procedures Part
2-35: Tests - Cable nutation
(IEC 61300-2-35:201X)
Data Limite: 2013-04-05
TC 86BXA
FprEN 61300-2-42:2013
Fibre optic interconnecting devices and passive
components - Basic test and measurement procedures Part
2-42: Tests - Static side load for strain relief
(IEC 61300-2-42:201X)
Data Limite: 2013-04-05
TC 86BXA
FprEN 61300-3-25:2013
Fibre optic interconnecting devices and passive
components - Basic test and measurement procedures Part
3-25:Examinations and measurements - Concentricity of
the non-angled ferrules and non-angled ferrules with fibre
installed
(IEC 61300-3-25:201X)
Data Limite: 2013-05-03
TC 86BXA
FprEN 61300-3-48:2012
Fibre optic interconnecting devices and passive
components - Basic test and measurement procedures Part
3-48:Measurement: Spring compression force of the
coupling sleeve for rectangular ferrule multi-fibre
connectors
(IEC 61300-3-48:201X)
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
Data Limite: 2013-03-01
TC 86BXA
FprEN 61300-3-50:2013
Fibre optic interconnecting devices and passive
components - Basic test and measurement procedures Part
3-50:Examinations and measurements - Crosstalk for
optical spatial switches
(IEC 61300-3-50:201X)
Data Limite: 2013-04-19
TC 86BXA
FprEN 61753-031-2:2013
Fibre optic interconnecting devices and passive
components - Performance standard Part
031-2:Non-connectorised single-mode 1×N and 2×N
non-wavelength-selective branching devices for
Category C - Controlled environment
(IEC 61753-031-2:201X)
Data Limite: 2013-06-07
TC 86BXA
FprEN 61753-031-3:2013
Fibre optic interconnecting devices and passive
components - Performance standard Part
031-3:Non-connectorised single-mode 1×N and 2×N
non-wavelength-selective branching devices for
Category U - Uncontrolled environment
Data Limite: 2013-06-07
TC 86BXA
FprEN 61753-031-6:2013
Fibre optic interconnecting devices and passive
component - Performance standard Part
031-6:Non-connectorised single-mode 1xN and 2xN
non-wavelength-selective branching devices for
Category O - Uncontrolled environment
(IEC 61753-031-6:201X)
Data Limite: 2013-06-07
TC 86BXA
FprEN 61754-1:2012
Fibre optic interconnecting devices and passive
components - Fibre optic connector interfaces Part
1:General and guidance
(IEC 61754-1:201X)
Data Limite: 2013-03-01
TC 86BXA
FprEN 61754-27:2013
Fibre optic interconnecting devices and passive
components - Fibre optic connector interfaces Part
27:Type M12-FO connector family
(IEC 61754-27:201X)
Data Limite: 2013-04-26
TC 94
FprEN 62246-1-1:2013
Reed switches Part 1-1:Quality assessment specification
(IEC 62246-1-1:201X)
Data Limite: 2013-04-26
TC 100X
FprEN 62379-5-1:2013
Common control interface for networked digital audio
and video products Part 5-1:Transmission over networks
- General
(IEC 62379-5-1:201X)
Data Limite: 2013-06-07
TC 108X
FprEN 60065:2012
Audio, video and similar electronic apparatus - Safety
requirements
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 66 15 março 2013

DOCUMENTOS
normativos
(IEC 60065:201X)
Data Limite: 2013-03-01
TC 108X
EN 60065:2012 /FprA A:2012
Audio, video and similar electronic apparatus - Safety
requirements
Data Limite: 2013-03-01
TC 108X
EN 60950-1:2006 /FprA 2:2013
Information technology equipment - Safety Part
1:General requirements
(IEC 60950-1:2005/A2:201X)
Data Limite: 2013-03-22
TC 108X
EN 60950-1:2006 /FprA E:2013
Information technology equipment - Safety Part
1:General requirements
Data Limite: 2013-03-22
TC 108X
FprEN 62368-1:2012
Audio/video, information and communication technology
equipment Part 1:Safety requirements
(IEC 62368-1:201X)
Data Limite: 2013-03-01
TC 108X
EN 62368-1:2012 /FprA A:2012
Audio/video, information and communication technology
equipment Part 1:Safety requirements
Data Limite: 2013-03-01
TC 111X
FprEN 62321-1:2013
Determination of certain substances in electrotechnical
products Part 1:Introduction and overview
(IEC 62321-1:201X)
Data Limite: 2013-04-26
TC 111X
FprEN 62321-2:2013
Determination of certain substances in electrotechnical
products Part 2:Disassembly, disjunction and
mechanical sample preparation
(IEC 62321-2:201X)
Data Limite: 2013-05-03
TC 111X
FprEN 62321-3-1:2013
Determination of certain substances in electrotechnical
products Part 3-1:Screening electrotechnical products
for lead, mercury, cadmium, total chromium and total
bromine using X-ray Fluorescence Spectrometry
(IEC 62321-3-1:201X)
Data Limite: 2013-05-03
TC 111X
FprEN 62321-3-2:2013
Determination of certain substances in electrotechnical
products Part 3-2:Screening of total bromine in
electric and electronic products by combustion-ion
chromatography (C-IC)
(IEC 62321-3-2:201X)
Data Limite: 2013-05-03
TC 111X
FprEN 62321-4:2013
Determination of certain substances in
electrotechnical products Part 4:Determination of
mercury in polymers, metals and electronics by
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
CV-AAS, CV-AFS, ICP-OES and ICP-MS
(IEC 62321-4:201X)
Data Limite: 2013-05-03
TC 111X
FprEN 62321-5:2013
Determination of certain substances in
electrotechnical products Part 5:Determination of
cadmium, lead, and chromium in polymers and
electronics and cadmium and lead in metals by AAS,
AFS, ICP-OES and ICP-MS
(IEC 62321-5:201X)
Data Limite: 2013-05-03
TC 111X
FprEN 62542:2013
Environmental standardization for electrical and
electronic products and systems - Standardization of
environmental aspects - Glossary of terms
(IEC 62542:201X)
Data Limite: 2013-05-03
TC 116
EN 50580:2012 /FprA 1:2013
Safety of hand-held electric motor operated tools -
Particular requirements for spray guns
Data Limite: 2013-06-14
TC 116
EN 60745-1:2009 /prA B:2012
Hand-held motor-operated electric tools - Safety Part 1:
General requirements
Data Limite: 2013-05-10
TC 116
EN 60745-2-1:2010 /prA A:2012
Hand-held motor-operated electric tools - Safety Part 2-1:
Particular requirements for drills and impact drills
Data Limite: 2013-05-10
TC 116
EN 60745-2-3:2011 /prA A:2012
Hand-held motor-operated electric tools - Safety Part 2-3:
Particular requirements for grinders, polishers and
disk-type sanders
Data Limite: 2013-05-10
TC 116
EN 60745-2-4:2009 /prA B:2012
Hand-held motor-operated electric tools - Safety Part
2-4: Particular requirements for sanders and polishers
other than disk type
Data Limite: 2013-05-10
TC 116
EN 60745-2-6:2010 /prA A:2012
Hand-held motor-operated electric tools - Safety Part
2-6: Particular requirements for hammers
Data Limite: 2013-05-10
TC 116
EN 60745-2-22:2011 /prA C:2012
Hand-held motor-operated electric tools - Safety Part
2-22: Particular requirements for cut-off machines
Data Limite: 2013-05-10
TC 116
FprEN 62841-2-5:2013
Electric Motor-Operated Hand-Held Tools, Transportable
Tools and Lawn and Garden Machinery - Safety Part
2-5:Particular requirements for hand-held circular saws
(IEC 62841-2-5:201X)
Data Limite: 2013-04-26
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 67 15 março 2013

DOCUMENTOS
normativos
TC 205
prEN 50491-1:2013
General requirements for Home and Building Electronic
Systems (HBES) and Building Automation and Control
Systems (BACS) Part 1: General requirements
Data Limite: 2013-06-14
TC 210
FprEN 55011:2013
Industrial, scientific and medical equipment -
Radio-frequency disturbance characteristics - Limits
and methods of measurement - Supplement of CISPR 11
with the APD method and associated limits for
assessment of fluctuating RF disturbances in the range
above 1 GHz
(CISPR 11:201X)
Data Limite: 2013-05-03
TC 210
EN 55013:2009 /FprA A:2012
Sound and television broadcast receivers and associated
equipment - Radio disturbance characteristics - Limits
and methods of measurement
Data Limite: 2013-03-15
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
(IEC 61000-3-3:2008)
(IEC 61000-3-3:1994/A3:200X)
(IEC 61000-3-3:1994/A2:2005)
Data Limite: 2013-04-12
TC 213
EN 50085-1:2005 /FprA 1:2013
Cable trunking systems and cable ducting systems for
electrical installations Part 1:General requirements
Data Limite: 2013-04-12
TC 215
prEN 50600-2-1:2012
Information tecchnology - Data centre facilities and
infrastructures Part 2-1:Building construction
Data Limite: 2013-03-01
TC 215
prEN 50600-2-2:2012
Information tecchnology - Data centre facilities and
infrastructures Part 2-2:Power distribution
Data Limite: 2013-03-01
TC 210
EN 55015:2006 /FprA 3:2013
Limits and methods of measurement of radio disturbance
characteristics of electrical lighting and similar
equipment
(CISPR 15:2005/A3:201X)
Data Limite: 2013-04-19
TC 210
EN 55016-2-3:2010 /FprA 2:2013
Specification for radio disturbance and immunity
measuring apparatus and methods Part 2-3:Methods of
measurement of disturbances and immunity - Radiated
disturbance measurements
(CISPR 16-2-3:2010/A2:201X) (fragment 1)
Data Limite: 2013-05-17
TC 210
EN 61000-3-2:2006 /FprA 3:2013
Electromagnetic compatibility (EMC) Part 3-2:Limits -
Limits for harmonic current emissions (equipment input
current

Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
6.2 Propostas de anulação de Normas
As propostas de anulação de normas estão organizadas por Comités Técnicos do CENELEC.
Para cada referência menciona-se a designação codificada, o título e a data limite para a
apresentação de comentários.
LISTA VAZIA
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 69 15 março 2013

Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
6.3 Proposta de estudo de novas normas - "Vilamoura Procedures"
Lista de propostas de estudo baseadas em novas normas ou em revisão de normas apresentadas
por organismos nacionais membros do CENELEC, com vista à possível elaboração de normas
europeias
LISTA VAZIA
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 70 15 março 2013

Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
6.4 Questionários preliminares
Lista dos Documentos de Referência (RD) objecto de Questionários Preliminares (PQ), com vista à
sua aceitação como normas europeias.
LISTA VAZIA
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 71 15 março 2013

Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
7. Projetos de Normas e Propostas de Estudo de Novas Normas do Comité Europeu
de Normalização (CEN) / Comité Europeu de Normalização Eletrotécnica
(CENELEC)
7.1 Projetos em inquérito público
Para cada referência menciona-se a designação codificada, o título e a data limite para a
apresentação de comentários.
LISTA VAZIA
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 72 15 março 2013

Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
8. Projetos de normas do Instituto Europeu de Normalização
para as Telecomunicações (ETSI)
8.1 Projetos em inquérito público
Para cada referência menciona-se a designação codificada, o título e a data limite para a
apresentação de comentários.
TC ETSI
prEN 300019-2-2:2012
Environmental Engineering (EE); Environmental
conditions and environmental tests for
telecommunications equipment Part 2-2: Specification of
environmental tests; Transportation
Data Limite: 2013-04-09
TC ETSI
prEN 300019-2-3:2012
Environmental Engineering (EE); Environmental
conditions and environmental tests for
telecommunications equipment Part 2-3: Specification of
environmental tests; Stationary use at weatherprotected
locations
Data Limite: 2013-04-09
TC ETSI
prEN 300019-2-4:2012
Environmental Engineering (EE); Environmental
conditions and environmental tests for
telecommunications equipment Part 2-4: Specification of
environmental tests; Stationary use at
non-weatherprotected locations
Data Limite: 2013-04-09
TC ETSI
prEN 300373-1:2013
Electromagnetic compatibility and Radio spectrum
Matters (ERM); Maritime mobile transmitters and
receivers for use in the MF and HF bands Part 1:
Technical characteristics and methods of measurement
Data Limite: 2013-05-09
TC ETSI
prEN 301033:2012
Electromagnetic compatibility and Radio spectrum
Matters (ERM); Technical characteristics and methods
of measurement for shipborne watchkeeping receivers
for reception of Digital Selective Calling (DSC) in
the maritime MF, MF/HF and VHF bands
Data Limite: 2013-04-18
TC ETSI
prEN 301489-34:2013
Electromagnetic compatibility and Radio spectrum
Matters (ERM); ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services Part
34:Specific conditions for External Power Supply (EPS)
for mobile phones
Data Limite: 2013-05-21
TC ETSI
prEN 301605:2013
Environmental Engineering (EE); Earthing and bonding
of 400 VDC data and telecom (ICT) equipment
Data Limite: 2013-05-13
TC ETSI
prEN 301908-1:2013
IMT cellular networks; Harmonized EN covering the
essential requirements of article 3.2 of the R&TTE
Directive Part 1:Introduction and common requirements
Data Limite: 2013-04-08
TC ETSI
prEN 301908-2:2013
IMT cellular networks; Harmonized EN covering the
essential requirements of article 3.2 of the R&TTE
Directive Part 2:CDMA Direct Spread (UTRA FDD)
User Equipment (UE)
Data Limite: 2013-06-10
TC ETSI
prEN 301908-3:2013
IMT cellular networks; Harmonized EN covering the
essential requirements of article 3.2 of the R&TTE
Directive Part 3:CDMA Direct Spread (UTRA FDD) Base
Stations (BS)
Data Limite: 2013-06-10
TC ETSI
prEN 301908-13:2013
IMT cellular networks; Harmonized EN covering the
essential requirements of article 3.2 of the R&TTE
Directive Part 13:Evolved Universal Terrestrial Radio
Access (E-UTRA) User Equipment (UE)
Data Limite: 2013-06-10
TC ETSI
prEN 301908-14:2013
IMT cellular networks; Harmonized EN covering the
essential requirements of article 3.2 of the R&TTE
Directive; Evolved Universal Terrestrial Radio Access
(E-UTRA) Base Stations (BS)
Data Limite: 2013-06-10
TC ETSI
prEN 301908-19:2013
IMT cellular networks; Harmonized EN covering the
essential requirements of article 3.2 of the R&TTE
Directive Part 19:OFDMA TDD WMAN (Mobile
WiMAX) TDD User Equipment (UE)
Data Limite: 2013-06-10
TC ETSI
TC ETSI
prEN 301489-35:2012
prEN 301908-20:2013
Electromagnetic compatibility and Radio spectrum
IMT cellular networks; Harmonized EN covering the
Matters (ERM); ElectroMagnetic Compatibility (EMC)
essential requirements of article 3.2 of the R&TTE
standard for radio equipment and services Part 35:
Directive Part 20:OFDMA TDD WMAN (Mobile WiMAX)
Specific requirements for Low Power Active Medical
TDD Base Stations (BS)
Implants (LP-AMI) operating in the 2 483,5 MHz to 2
Data Limite: 2013-06-10
500 MHz bands
Data Limite: 2013-04-23
TC ETSI
prEN 301925:2013
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 73 15 março 2013

DOCUMENTOS
normativos
Electromagnetic compatibility and Radio spectrum
Matters (ERM); Radiotelephone transmitters and
receivers for the maritime mobile service operating in
VHF bands; Technical characteristics and methods of
measurement
Data Limite: 2013-05-09
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
TC ETSI
prEN 302307:2012
Digital Video Broadcasting (DVB); Second generation
framing structure, channel coding and modulation
systems for Broadcasting, Interactive Services, News
Gathering and other broadband satellite applications
(DVB-S2)
Data Limite: 2013-03-01
TC ETSI
prEN 302663:2012
Intelligent Transport Systems (ITS); Access layer
specification for Intelligent Transport Systems operating
in the 5 GHz frequency band
Data Limite: 2013-03-01
TC ETSI
prEN 302999:2013
Safety; Remote Power Feeding Installations; Safety
requirements for the erection and operation of
information technology installations with remote power
feeding
Data Limite: 2013-03-22
TC ETSI
prEN 303084:2013
Ground Based Augmentation System (GBAS) VHF
ground-air Data Broadcast (VDB); Technical
characteristics and methods of measurement for
ground-based equipment; Harmonized EN covering the
essential requirements of article 3.2 of the R&TTE
Directive
Data Limite: 2013-05-21
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 74 15 março 2013

Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
8.2 Propostas de anulação de Normas
Para cada referência menciona-se a designação codificada, o título e a data limite para a
apresentação de comentários.
LISTA VAZIA
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 75 15 março 2013

Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
9. Projetos de normas e propostas de estudo de novas Normas de Organização
Internacional de Normalização (ISO)
Os projetos de normas e propostas de estudo de novas normas estão organizadas por Comités
Técnicos da ISO.
9.1 Projetos em inquérito público
Para cada referência menciona-se a designação codificada, o título e a data limite para a
apresentação de comentários.
TC 4
DIS 199:2013
Rolling bearings Thrust bearings Geometrical product
specification (GPS) and tolerance values
Data Limite: 2013-05-11
TC 4
DIS 492:2013
Rolling bearings Radial bearings Dimensional and
geometrical tolerances
Data Limite: 2013-05-11
TC 4
ISO 10317:2008 /DAM 1:2013
Rolling bearings Tapered roller bearings Designation
system
AMENDMENT 1
Data Limite: 2013-04-29
TC 6
FDIS 217:2013
Paper Untrimmed sizes Designation and tolerances for
primary and supplementary ranges, and indication of
machine direction
Data Limite: 2013-04-21
TC 6
DIS 14453:2013
Pulps Determination of acetone-soluble matter
Data Limite: 2013-06-10
TC 6
DIS 16945:2013
Corrugating medium Determination of the edge crush
resistance after laboratory fluting
Data Limite: 2013-05-25
TC 8
DIS 17357-2:2013
Ships·and·marine·technology
Floating·pneumatic·rubber·fenders Part 2: Low pressure
Data Limite: 2013-04-13
TC 8
DIS 17602:2013
Ships and marine technology Metal valves for use in
flanged pipe Face to face and centre to face dimensions
Data Limite: 2013-05-26
TC 8
DIS 22090-1:2013
Ships and marine technology Transmitting heading
devices (THDs) Part 1: Gyro-compasses
Data Limite: 2013-05-22
TC 8
DIS 22090-2:2013
Ships and marine technology Transmitting heading
devices (THDs) Part 2: Geomagnetic principles
Data Limite: 2013-05-22
TC 8
DIS 22090-3:2013
Ships and marine technology Transmitting heading
devices (THDs) Part 3: GNSS principles
Data Limite: 2013-05-22
TC 10
DIS 10628-1:2012
Diagrams for the chemical and petrochemical industry
Part 1: Specification of diagrams
Data Limite: 2013-05-13
TC 8
DIS 8728:2013
Ships and marine technology Marine gyro-compasses
Data Limite: 2013-05-22
TC 8
DIS 14886:2013
Ships and marine technology Large Yachts Structural
fire protection for FRP yachts
Data Limite: 2013-04-16
TC 8
DIS 16328:2013
Ships and marine technology Gyro-compasses for
high-speed craft
Data Limite: 2013-05-22
TC 10
DIS 15787:2013
Technical product documentation Heat-treated ferrous
parts Presentation and indications
Data Limite: 2013-05-10
TC 10
DIS 16792:2012
Technical product documentation Digital product
definition data practices
Data Limite: 2013-04-01
TC 17
DIS 5002:2013
Hot-rolled and cold-reduced electrolytic zinc-coated
carbon steel sheet of commercial and drawing qualities
Data Limite: 2013-04-30
TC 8
DIS 17357-1:2013
TC 17
Ships·and·marine·technology
FDIS 5951:2013
Floating·pneumatic·rubber·fenders Part 1: High pressure
Hot-rolled steel sheet of higher yield strength with
Data Limite: 2013-04-13
improved formability
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 76 15 março 2013

DOCUMENTOS
normativos
Data Limite: 2013-04-25
TC 17
DIS 7778:2012
Through-thickness characteristics for steel products
Data Limite: 2013-03-19
TC 17
DIS 15510:2012
Stainless steels Chemical composition
Data Limite: 2013-03-03
TC 17
DIS 16143-1:2012
Stainless steels for general purposes Part 1: Flat products
Data Limite: 2013-03-03
TC 17
DIS 16143-2:2012
Stainless steels for general purposes Part 2:
Semi-finished products, bars, rods and sections
Data Limite: 2013-03-03
TC 17
DIS 16143-3:2012
Stainless steels for general purposes Part 3: Wire
Data Limite: 2013-03-03
TC 20
DIS 4118:2013
Air cargo Non-certified lower deck containers
Specification and testing
Data Limite: 2013-05-18
TC 20
DIS 10254:2013
Air cargo and ground equipment Vocabulary
Data Limite: 2013-05-16
TC 20
FDIS 16049-2:2013
Air cargo equipment Restraint straps Part 2: Utilization
guidelines and lashing conditions
Data Limite: 2013-04-08
TC 20
FDIS 16698:2013
Space environment (natural and artificial) Methods for
estimation of future geomagnetic activity
Data Limite: 2013-04-01
TC 22
FDIS 3560:2013
Road vehicles Frontal fixed barrier or pole impact test
procedure
Data Limite: 2013-04-20
TC 22
DIS 6469-4:2013
Electrically propelled road vehicles Safety specifications
Part 4: Post crash electrical safety
Data Limite: 2013-05-21
TC 22
DIS 8820-5:2013
Road vehicles Fuse-links Part 5: Fuse-links with axial
terminals (Strip fuse-links) Types SF 30 and SF 51 and
test fixtures
Data Limite: 2013-04-09
TC 22
DIS 10924-3:2012
Road vehicles Circuit breakers Part 3: Miniature circuit
breakers
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
Data Limite: 2013-03-27
TC 22
ISO 11452-7:2003 /DAM 1:2012
Road vehicles Component test methods for electrical
disturbances from narrowband radiated electromagnetic
energy Part 7: Direct radio frequency (RF) power
injection
AMENDMENT 1
Data Limite: 2013-03-14
TC 22
DIS 12614-1:2013
Road vehicles Liquefied natural gas (LNG) fuel system
components Part 1: General requirements and definitions
Data Limite: 2013-04-16
TC 22
DIS 12614-2:2013
Road vehicles Liquefied natural gas (LNG) fuel system
components Part 2: Performance and general test
methods
Data Limite: 2013-04-16
TC 22
DIS 12614-3:2013
Road vehicles Liquefied natural gas (LNG) fuel system
components Part 3: Check valve
Data Limite: 2013-04-16
TC 22
DIS 12614-4:2013
Road vehicles Liquefied natural gas (LNG) fuel system
components Part 4: Manual valve
Data Limite: 2013-04-16
TC 22
DIS 12614-5:2013
Road vehicles Liquefied natural gas (LNG) fuel system
components Part 5: Tank pressure gauge
Data Limite: 2013-04-16
TC 22
DIS 12614-6:2013
Road vehicles Liquefied natural gas (LNG) fuel system
components Part 6: Overpressure regulator
Data Limite: 2013-04-16
TC 22
DIS 12614-7:2013
Road vehicles Liquefied natural gas (LNG) fuel system
components Part 7:Pressure relief valve
Data Limite: 2013-04-16
TC 22
DIS 12614-8:2013
Road vehicles Liquefied natural gas (LNG) fuel system
components Part 8: Excess flow valve
Data Limite: 2013-04-16
TC 22
DIS 12614-9:2013
Road vehicles Liquefied natural gas (LNG) fuel system
components Part 9: Gas-tight housing and ventilation
hose
Data Limite: 2013-04-16
TC 22
DIS 12614-10:2013
Road vehicles Liquefied natural gas (LNG) fuel system
components Part 10: Rigid fuel line in stainless steel
Data Limite: 2013-04-16
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 77 15 março 2013

DOCUMENTOS
normativos
TC 22
DIS 12614-11:2013
Road vehicles Liquefied natural gas (LNG) fuel system
components Part 11: Fittings
Data Limite: 2013-04-16
TC 22
DIS 12614-12:2013
Road vehicles Liquefied natural gas (LNG) fuel system
components Part 12: Rigid fuel line in material other than
stainless steel
Data Limite: 2013-04-16
TC 22
DIS 12614-13:2013
Road vehicles Liquefied natural gas (LNG) fuel system
components Part 13: Pressure control regulator
Data Limite: 2013-04-16
TC 22
DIS 12614-14:2013
Road vehicles Liquefied natural gas (LNG) fuel system
components Part 14: Differential pressure fuel content
gauge
Data Limite: 2013-04-16
TC 22
DIS 12614-15:2013
Road vehicles Liquefied natural gas (LNG) fuel system
components Part 15: Capacitance fuel content gauge
Data Limite: 2013-04-16
TC 22
DIS 12614-16:2013
Road vehicles Liquefied natural gas (LNG) fuel system
components Part 16: Heat exchanger - vaporizer
Data Limite: 2013-04-16
TC 22
DIS 12614-17:2013
Road vehicles Liquefied natural gas (LNG) fuel system
components Part 17: Natural gas detector
Data Limite: 2013-04-16
TC 22
DIS 12614-18:2013
Road vehicles Liquefied natural gas (LNG) fuel system
components Part 18: Gas temperature sensor
Data Limite: 2013-04-16
TC 22
DIS 12617:2012
Liquefied natural gas vehicles Connector for reflueling
vehicles
Data Limite: 2013-03-31
TC 22
DIS 15007-1:2013
Road vehicles Measurement of driver visual behaviour
with respect to transport information and control systems
Part 1: Definitions and parameters
Data Limite: 2013-07-01
TC 22
DIS 15031-7:2013
Road vehicles Communication between vehicle and
external equipment for emissions-related diagnostics Part
7: Data link security
Data Limite: 2013-04-07
TC 22
FDIS 15829:2013
Road vehicles Side impact test procedures for the
evaluation of occupant interactions with side airbags by
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
pole impact simulation
Data Limite: 2013-04-20
TC 22
DIS 16380:2013
Road Vehicles Blended Fuels Refuelling Connector
Data Limite: 2013-04-12
TC 22
DIS 16552:2013
Heavy commercial vehicles and buses Stopping distance
in straight-line braking with ABS Open loop and closed
loop test methods
Data Limite: 2013-04-03
TC 22
ISO 16850:2007 /FDAM 1:2013
Road vehicles Pedestrian protection Child head impact
test method
Amendment 1
Data Limite: 2013-03-17
TC 22
DIS 23828:2013
Fuel cell road vehicles Energy consumption
measurement Vehicles fuelled with compressed hydrogen
Data Limite: 2013-05-21
TC 23
DIS 500-1:2012
Agricultural tractors Rear-mounted power take-off types
1, 2, 3 and 4 Part 1:General specifications, safety
requirements, dimensions for master shield and
clearance zone
Data Limite: 2013-03-02
TC 23
DIS 500-3:2012
Agricultural tractors Rear-mounted power take-off types
1, 2, 3 and 4 Part 3: Main PTO dimensions and spline
dimensions, location of PTO
Data Limite: 2013-03-02
TC 23
ISO 730:2009 /FDAM 1:2012
Agricultural wheeled tractors Rear-mounted three-point
linkage Categories 1N, 1, 2N, 2, 3N, 3, 4N and 4
AMENDMENT 1
Data Limite: 2013-03-02
TC 23
FDIS 4254-1:2013
Agricultural machinery Safety Part 1: General
requirements
Data Limite: 2013-03-24
TC 23
FDIS 5700:2013
Tractors for agriculture and forestry Roll-over protective
structures Static test method and acceptance conditions
Data Limite: 2013-03-23
TC 23
ISO 10998:2008 /DAM 1:2013
Agricultural tractors Requirements for steering
AMENDMENT 1
Data Limite: 2013-05-26
TC 23
FDIS 12140:2013
Agricultural machinery Agricultural trailers and trailed
equipment Drawbar jacks
Data Limite: 2013-04-11
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 78 15 março 2013

DOCUMENTOS
normativos
TC 23
DIS 16122-1:2013
Agricultural and forestry machinery Inspection of
sprayers in use Part 1: General
Data Limite: 2013-06-10
TC 23
DIS 16122-2:2013
Agricultural and forestry machinery Inspection of
sprayers in use Part 2: Horizontal boom sprayers
Data Limite: 2013-06-10
TC 23
DIS 16122-3:2013
Agricultural and forestry machinery Inspection of
sprayers in use Part 3: Vertical boom sprayers,
mistblowers and similar
Data Limite: 2013-06-10
TC 23
FDIS 16236:2013
Crop protection equipment Test method for the
determination of drainable volume and its concentration
Data Limite: 2013-04-07
TC 23
FDIS 19932-1:2013
Equipment for crop protection Knapsack sprayers Part
1: Safety and environmental requirements
Data Limite: 2013-04-07
TC 23
FDIS 19932-2:2013
Equipment for crop protection Knapsack sprayers Part
2: Test methods
Data Limite: 2013-04-07
TC 24
DIS 13317-4:2013
Determination of particle size distribution by
gravitational liquid sedimentation methods Part 4:
Balance method
Data Limite: 2013-05-16
TC 27
FDIS 579:2013
Coke Determination of total moisture
Data Limite: 2013-03-11
TC 27
FDIS 975:2013
Brown coals and lignites Determination of yield of
benzenesoluble extract Semi-automatic method
Data Limite: 2013-03-11
TC 27
FDIS 5071-1:2013
Brown coals and lignites Determination of the volatile
matter in the analysis sample Part 1: Two-furnace method
Data Limite: 2013-03-11
TC 27
FDIS 5072:2013
Brown coals and lignites Determination of true relative
density and apparent relative density
Data Limite: 2013-03-11
TC 27
FDIS 5073:2013
Brown coals and lignites Determination of humic acids
Data Limite: 2013-03-11
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
TC 28
ISO 4264:2007 /FDAM 1:2013
Petroleum products Calculation of cetane index of
middle-distillate fuels by the four variable equation
AMENDMENT 1
Data Limite: 2013-03-10
TC 29
FDIS 6344-3:2013
Coated abrasives Grain size analysis Part 3:
Determination of grain size distribution of microgrits
P240 to P2500
Data Limite: 2013-03-09
TC 29
FDIS 9284:2012
Abrasive grains Test-sieving machines
Data Limite: 2013-04-21
TC 29
DIS 26623-1:2013
Polygonal taper interface with flange contact surface
Part 1: Dimensions and designation of shanks
Data Limite: 2013-05-10
TC 29
DIS 26623-2:2013
Polygonal taper interface with flange contact surface
Part 2: Dimensions and designation of receivers
Data Limite: 2013-05-10
TC 30
DIS 10790:2012
Measurement of fluid flow in closed conduits Guidance to
the selection, installation and use of Coriolis meters
(mass flow, density and volume flow measurements)
Data Limite: 2013-03-03
TC 31
DIS 5775-2:2013
Bicycle tyres and rims
Part 2: Rims
Data Limite: 2013-04-08
TC 31
FDIS 6358-2:2013
Pneumatic fluid power Determination of flow-rate
characteristics of components using compressible fluids
Part 2: Alternative test methods
Data Limite: 2013-03-17
TC 34
ISO 8589:2007 /DAM 1:2013
Sensory analysis General guidance for the design of test
rooms
AMENDMENT 1
Data Limite: 2013-06-10
TC 34
DIS 11136:2012
Sensory analysis Methodology General guidance for
conducting hedonic tests with consumers in an controlled
area
Data Limite: 2013-03-30
TC 34
DIS 14244:2013
Oilseed meals Determination of soluble protein in
potassium hydroxide solution
Data Limite: 2013-05-14
TC 34
DIS 16140-1:2013
Microbiology of food and animal feed Method validation
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 79 15 março 2013

DOCUMENTOS
normativos
Part 1: Vocabulary
Data Limite: 2013-06-10
TC 34
DIS 16140-2:2013
Microbiology of food and animal feed Method validation
Part 2: Protocol for the validation of alternative
(proprietary) methods against a reference method
Data Limite: 2013-06-10
TC 34
DIS 16297:2013
Milk Bacterial count Protocol for the evaluation of
alternative methods
Data Limite: 2013-03-15
TC 34
DIS 17468:2013
Microbiology of food and animal feed Technical
requirements and guidance on establishment or revision
of standard methods
Data Limite: 2013-06-10
TC 34
ISO 21570:2005 /FDAM 1:2013
Foodstuffs Methods of analysis for the detection of
genetically modified organisms and derived products
Quantitative nucleic acid based methods
AMENDMENT 1
Data Limite: 2013-03-10
TC 34
ISO 24276:2006 /FDAM 1:2013
Foodstuffs Methods of analysis for the detection of
genetically modified organisms and derived products
General requirements and definitions
AMENDMENT 1
Data Limite: 2013-03-10
TC 37
DIS 24156-1:2013
Graphic notations for concept modeling in terminology
work and its relationship with UML Part 1: Guidelines
for using UML and mind-mapping notation in
terminology work
Data Limite: 2013-05-11
TC 38
FDIS 105-B02:2013
Textiles
Tests for colour fastness Part B02: Colour fastness to
artificial light: Xenon arc fading lamp test
Data Limite: 2013-04-07
TC 38
DIS 12945-3:2012
Textiles Determination of the fabric propensity to
surface pilling, fuzzing or matting Part 3: Random
tumble pilling method
Data Limite: 2013-04-29
TC 38
FDIS 13934-1:2012
Textiles Tensile properties of fabrics Part 1:
Determination of maximum force and elongation at
maximum force using the strip method
Data Limite: 2013-03-01
TC 38
DIS 16373-3:2012
Textiles Dyestuffs Part 3: Method for determination of
certain carcinogenic extractable dyestuffs (method using
triethylamine/methanol)
Data Limite: 2013-04-08
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
TC 38
DIS 24362-1:2013
Textiles Methods for determination of certain aromatic
amines derived from azo colorants Part 1: Detection of the
use of certain azo colorants accessible with and without
extracting the fibres
Data Limite: 2013-05-14
TC 38
DIS 24362-3:2013
Textiles Methods for determination of certain aromatic
amines derived from azo colorants Part 3: Detection of
the use of certain azo colorants, which may release
4-aminoazobenzene
Data Limite: 2013-05-14
TC 41
FDIS 7622-1:2012
Steel cord conveyor belts Longitudinal traction test Part
1: Measurement of elongation
Data Limite: 2013-03-01
TC 42
DIS 18927:2012
Imaging materials - Photographic reflection prints -
Methods for measuring indoor light stability
Data Limite: 2013-03-03
TC 42
DIS 18937:2012
Imaging materials Photographic reflection prints Methods
for measuring indoor light stability
Data Limite: 2013-03-03
TC 43
FDIS 3095:2013
Acoustics Railway applications Measurement of noise
emitted by railbound vehicles
Data Limite: 2013-03-31
TC 43
ISO 5129:2001 /FDAM 1:2013
Acoustics Measurement of sound pressure levels in the
interior of aircraft during flight
Amendment 1
Data Limite: 2013-04-05
TC 43
ISO 10140-1:2010 /DAM 2:2012
Acoustics Laboratory measurement of sound insulation of
building elements Part 1: Application rules for specific
products
AMENDMENT 2: Rainfall noise
Data Limite: 2013-05-07
TC 43
ISO 10140-5:2010 /DAM 1:2012
Acoustics Laboratory measurement of sound insulation of
building elements Part 5: Requirements for test
facilities and equipment
AMENDMENT 1: Rainfall noise
Data Limite: 2013-04-07
TC 44
DIS 669:2013
Resistance welding Resistance welding equipment
Mechanical and electrical requirements
Data Limite: 2013-06-10
TC 44
FDIS 6520-2:2012
Welding and allied processes Classification of geometric
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 80 15 março 2013

DOCUMENTOS
normativos
imperfections in metallic materials Part 2: Welding with
pressure
Data Limite: 2013-03-01
TC 44
FDIS 9312:2013
Resistance welding equipment Insulated pins for use in
electrode back-ups
Data Limite: 2013-05-07
TC 44
DIS 14114:2012
Gas welding equipment Acetylene manifold systems for
welding, cutting and allied processes General
requirements
Data Limite: 2013-03-11
TC 44
DIS 23277:2013
Non-destructive testing of welds Penetrant testing of
welds Acceptance levels
Data Limite: 2013-06-24
TC 44
DIS 23278:2013
Non-destructive testing of welds Magnetic particle
testing of welds Acceptance levels
Data Limite: 2013-06-24
TC 44
DIS 25980:2012
Health and safety in welding and allied processes
Transparent welding curtains, strips and screens for arc
welding processes
Data Limite: 2013-04-08
TC 45
DIS 289-1:2013
Rubber, unvulcanized Determinations using a
shearing-disc viscometer Part 1: Determination of
Mooney viscosity
Data Limite: 2013-05-04
TC 45
DIS 815-1:2013
Rubber, vulcanized or thermoplastic Determination of
compression set Part 1: At ambient or elevated
temperatures
Data Limite: 2013-05-04
TC 45
DIS 815-2:2013
Rubber, vulcanized or thermoplastic Determination of
compression set Part 2: At low temperatures
Data Limite: 2013-05-04
TC 45
DIS 2000:2013
Rubber, raw natural Guidelines for the specification of
technically specified rubber (TSR)
Data Limite: 2013-05-27
TC 45
DIS 6914:2013
Rubber, vulcanized or thermoplastic Determination of
ageing characteristics by measurement of stress
relaxation in tension
Data Limite: 2013-05-04
TC 45
DIS 14285:2013
Rubber and plastics gloves for food services Limits for
extractable substances
Data Limite: 2013-04-15
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
TC 45
DIS 17257:2013
Rubber Identification of polymers Pyrolytic
gaschromatographic method using mass-spectrometric
detection
Data Limite: 2013-05-04
TC 54
DIS 3218:2013
Essential oils Principles of nomenclature
Data Limite: 2013-06-24
TC 58
FDIS 11439:2013
Gas cylinders High pressure cylinders for the on-board
storage of natural gas as a fuel for automotive vehicles
Data Limite: 2013-03-17
TC 58
DIS 11623:2012
Gas cylinders Composite construction Periodic
inspection and testing
Data Limite: 2013-03-11
TC 58
ISO 15245-1:2001 /FDAM 1:2013
Gas cylinders Parallel threads for connection of valves to
gas cylinders Part 1: Specification
Amendment 1
Data Limite: 2013-03-31
TC 60
FDIS 1328-1:2013
Cylindrical gears ISO system of flank tolerance
classification
Part 1: Definitions and allowable values of deviations
relevant to flanks of gear teeth
Data Limite: 2013-03-24
TC 60
DIS 14104:2013
Gears Surface temper etch inspection after grinding
Data Limite: 2013-05-22
TC 61
FDIS 11357-2:2013
Plastics Differential scanning calorimetry (DSC) Part 2:
Determination of glass transition temperature and glass
transition step height
Data Limite: 2013-03-24
TC 61
DIS 11358-1:2013
Plastics Thermogravimetry (TG) of polymers Part 1:
General principles
Data Limite: 2013-07-14
TC 61
DIS 11359-1:2013
Plastics Thermomechanical analysis (TMA) Part 1:
General principles
Data Limite: 2013-05-10
TC 61
DIS 16365-1:2013
Plastics Thermoplastic polyurethanes for moulding and
extrusion Part 1: Designation system and basis for
specifications
Data Limite: 2013-04-15
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 81 15 março 2013

DOCUMENTOS
normativos
TC 61
DIS 16365-2:2013
Plastics Thermoplastic polyurethanes for moulding and
extrusion Part 2: Preparation of test specimens and
determination of properties
Data Limite: 2013-04-15
TC 61
DIS 16365-3:2013
Plastics Thermoplastic polyurethanes for moulding and
extrusion Part 3: Distinction between ether and ester
polyurethanes by determination of the ester group content
Data Limite: 2013-04-15
TC 61
DIS 17221:2013
Plastics Determination of image clarity (degree of
sharpness of reflected or transmitted image)
Data Limite: 2013-05-04
TC 61
FDIS 26842-1:2013
Adhesives Test methods for the evaluation and selection
of adhesives for indoor wood products Part 1:
Resistance to delamination in nonsevere environments
Data Limite: 2013-04-20
TC 61
FDIS 26842-2:2013
Adhesives Test methods for the evaluation and selection
of adhesives for indoor wood products Part 2: Resistance
to delamination in severe environments
Data Limite: 2013-04-20
TC 67
DIS 13354:2013
Petroleum and natural gas industries Shallow gas
diverter equipment
Data Limite: 2013-07-07
TC 67
DIS 16903:2013
Characteristics of LNG influencing design and material
selection
Data Limite: 2013-07-07
TC 69
DIS 13528:2013
Statistical methods for use in proficiency testing by
interlaboratory comparisons
Data Limite: 2013-04-22
TC 69
DIS 16336:2013
Robust parameter design (RPD)
Data Limite: 2013-05-16
TC 71
FDIS 1920-11:2013
Testing of concrete Part 11: Determination of the chloride
resistance of concrete, unidirectional diffusion
Data Limite: 2013-03-22
TC 71
FDIS 28841:2013
Guidelines for simplified seismic assessment and
rehabilitation of concrete buildings
Data Limite: 2013-03-17
TC 71
FDIS 28842:2013
Guidelines for the simplified design of reinforced
concrete bridges
Data Limite: 2013-03-17
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
TC 72
ISO 9902-1:2001 /DAM 2:2013
Textile machinery Noise test code Part 1: Common
requirements
AMENDMENT 2
Data Limite: 2013-06-10
TC 72
ISO 9902-2:2001 /DAM 2:2013
Textile machinery Noise test code Part 2: Spinning
preparatory and spinning machinery
AMENDMENT 2
Data Limite: 2013-06-10
TC 72
ISO 9902-3:2001 /DAM 2:2013
Textile machinery Noise test code Part 3:Nonwoven
machinery
AMENDMENT 2
Data Limite: 2013-06-10
TC 72
ISO 9902-4:2001 /DAM 2:2013
Textile machinery Noise test code Part 4: Yarn
processing, cordage and rope manufacturing machinery
AMENDMENT 2
Data Limite: 2013-06-10
TC 72
ISO 9902-5:2001 /DAM 2:2013
Textile machinery Noise test code Part 5: Weaving and
knitting preparatory machinery
AMENDMENT 2
Data Limite: 2013-06-10
TC 72
ISO 9902-6:2001 /DAM 2:2013
Textile machinery Noise test code Part 6: Fabric
manufacturing machinery
AMENDMENT 2
Data Limite: 2013-06-10
TC 72
ISO 9902-7:2001 /DAM 2:2013
Textile machinery Noise test code Part 7: Dyeing and
finishing machinery
AMENDMENT 2
Data Limite: 2013-06-10
TC 72
DIS 21485:2013
Textile machinery Draw frame for cotton spinning
Vocabulary and principles of construction
Data Limite: 2013-04-24
TC 76
FDIS 3826-1:2013
Plastics collapsible containers for human blood and
blood components Part 1: Conventional containers
Data Limite: 2013-04-21
TC 83
DIS 9523:2013
Touring ski-boots for adults Interface with touring
ski-bindings Requirements and test methods
Data Limite: 2013-04-16
TC 85
FDIS 15690:2013
Radiological protection Recommendations for dealing
with discrepancies between personal dosimeter systems
used in parallel
Data Limite: 2013-04-21
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 82 15 março 2013

DOCUMENTOS
normativos
TC 85
DIS 21483:2012
Determination of Solubility in Nitric Acid of Plutonium
in Unirradiated Mixed Oxide Fuel Pellets (U, Pu) O2
Data Limite: 2013-03-10
TC 85
DIS 51275:2013
Practice for use of a radiochromic film dosimetry system
Data Limite: 2013-04-03
TC 85
DIS 51607:2013
Practice for use of the alanine-EPR dosimetry system
Data Limite: 2013-04-03
TC 85
DIS 51650:2013
Practice for use of the alanine-EPR dosimetry system
Data Limite: 2013-04-03
TC 85
DIS 51818:2013
Practice for dosimetry in an electron beam facility for
radiation processing at energies between 80 and 300 keV
Data Limite: 2013-04-03
TC 86
FDIS 16358-1:2013
Air-cooled air conditioners and airto-air heat pumps
Testing and calculating methods for seasonal performance
factors Part 1: Cooling seasonal performance factor
Data Limite: 2013-03-15
TC 86
FDIS 16358-2:2013
Air-cooled air conditioners and airto-air heat pumps
Testing and calculating methods for seasonal
performance factors Part 2:Heating seasonal performance
factor
Data Limite: 2013-03-15
TC 86
FDIS 16358-3:2013
Air-cooled air conditioners and airto -air heat pumps
Testing and calculating methods for seasonal
performance factors Part 3: Annual performance factor
Data Limite: 2013-03-15
TC 89
DIS 1954:2013
Plywood Tolerances on dimensions
Data Limite: 2013-04-15
TC 92
DIS 16405:2012
Measurement of toxic gas production using FTIR
technique for room corner test and open calorimetry
Data Limite: 2013-03-04
TC 94
FDIS 13688:2013
Protective clothing General requirements
Data Limite: 2013-03-24
TC 96
DIS 7752-3:2012
Cranes Control layout and characteristics Part 3: Tower
cranes
Data Limite: 2013-03-27
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
TC 96
DIS 9374-3:2012
Cranes Information to be provided for enquiries, orders,
offers and supply Part 3: Tower cranes
Data Limite: 2013-03-08
TC 96
DIS 10245-2:2013
Cranes Limiting and indicating devices Part 2: Mobile
cranes
Data Limite: 2013-04-15
TC 98
DIS 4355:2013
Bases for design of structures Determination of snow
loads on roofs
Data Limite: 2013-05-21
TC 102
DIS 17992:2012
Iron ores Determination of arsenic content Hydride
generation atomic absorption spectrometric method
Data Limite: 2013-03-03
TC 106
FDIS 3630-2:2013
Dentistry
Endodontic instruments Part 2: Enlargers
Data Limite: 2013-03-10
TC 106
ISO 7405:2008 /FDAM 1:2013
Dentistry Evaluation of biocompatibility of medical
devices used in dentistry AMENDMENT 1: Positive
control material
Data Limite: 2013-04-14
TC 106
DIS 9173-3:2013
Dentistry Extraction forceps Part 3: Design
Data Limite: 2013-07-14
TC 106
DIS 16635-2:2012
Dentistry Dental rubber dam technique Part 2: Clamp
forceps
Data Limite: 2013-05-13
TC 106
DIS 24234:2013
Dentistry Dental amalgam
Data Limite: 2013-06-17
TC 106
FDIS 29022:2013
Dentistry Adhesion Notched-edge shear bond strength
test
Data Limite: 2013-03-10
TC 108
DIS 10816-8:2012
Mechanical vibration Evaluation of machine vibration
by measurements on non-rotating parts Part 8:
Reciprocating compressor systems
Data Limite: 2013-03-15
TC 108
DIS 18431-3:2012
Mechanical vibration and shock Signal processing Part
3: Methods of time-frequency and time-scale analysis
Data Limite: 2013-03-10
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 83 15 março 2013

DOCUMENTOS
normativos
TC 108
ISO 20283-4:2012 /DAM 1:2013
Mechanical vibration Measurement of vibration on ships
Part 4:Measurement and evaluation of vibration of the
ship propulsion machinery
AMENDMENT 1
Data Limite: 2013-05-05
TC 110
DIS 22915-22:2013
Industrial trucks Verification of stability Part 22:
Lateral- and front-stacking trucks with elevating operator
position
Data Limite: 2013-04-12
TC 113
DIS 11657:2012
Sediment in streams and canals Determination of
concentration by surrogate techniques
Data Limite: 2013-03-03
TC 119
FDIS 3326:2013
Hardmetals Determination of (the magnetization)
coercivity
Data Limite: 2013-04-21
TC 119
DIS 14317:2013
Sintered metal materials excluding hardmetals
Determination of compressive yield strength
Data Limite: 2013-05-25
TC 121
DIS 5359:2012
Anaesthetic·and·respiratory·equipment Low-pressure
·hose·assemblies·for·use·with·medical·gases
Data Limite: 2013-04-01
TC 121
DIS 8836:2013
Suction catheters for use in the respiratory tract
Data Limite: 2013-07-01
TC 121
DIS 18082:2012
Anaesthetic·and·respiratory·equipment
Non-interchangeable·screw-threaded·(NIST)·lowpressure
·connectors·for·medical·gases
Data Limite: 2013-04-01
TC 121
DIS 80601-2-69:2012
Medical Electrical Equipment Part 2-69: Particular
requirements for basic safety and essential performance
of oxygen concentrator equipment
Data Limite: 2013-03-25
TC 126
DIS 3550-3:2013
Cigarettes Determination of loss of tobacco from the
ends Part 3: Method using a vibro-bench
Data Limite: 2013-04-03
TC 127
FDIS 7130:2013
Earth-moving machinery Operator training Content and
methods
Data Limite: 2013-03-23
TC 127
DIS 8812:2013
Earth-moving machinery Backhoe loaders Terminology
and commercial specifications
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
Data Limite: 2013-05-25
TC 127
DIS 15818:2013
Earth-moving machinery Lifting and tying-down
attachment points Performance requirements
Data Limite: 2013-04-02
TC 127
DIS 17253:2013
Earth-moving machines and rough-terrain variable reach
trucks Design requirements for machines intended to be
driven on the road
Data Limite: 2013-04-02
TC 130
DIS 12647-4:2013
Graphic technology Process control for the production of
half-tone colour separations, proofs and production prints
Part 4: Publication gravure printing
Data Limite: 2013-05-18
TC 131
FDIS 6358-1:2013
Pneumatic fluid power Determination of flow-rate
characteristics of components using compressible fluids
Part 1: General rules and test methods for steady-state
flow
Data Limite: 2013-03-31
TC 135
DIS 12715:2013
Non-destructive testing Ultrasonic testing Reference
blocks and test procedures for the characterization of
contact probe sound beams
Data Limite: 2013-04-10
TC 135
DIS 17405:2012
Non-destructive testing Ultrasonic testing Technique of
testing claddings produced by welding, rolling and
explosion
Data Limite: 2013-03-04
TC 135
FDIS 19232-1:2013
Non-destructive testing Image quality of radiographs Part
1: Determination of the image quality of radiographs
using wire-type indicators
Data Limite: 2013-04-14
TC 135
FDIS 19232-2:2013
Non-destructive testing Image quality of radiographs Part
2: Determination of the image quality value using
step/hole-type image quality indicators
Data Limite: 2013-04-14
TC 135
FDIS 19232-3:2013
Non-destructive testing Image quality of radiographs Part
3:Image quality classes
Data Limite: 2013-04-14
TC 135
FDIS 19232-4:2013
Non-destructive testing Image quality of radiographs
Part 4: Experimental evaluation of image quality values
and image quality tables
Data Limite: 2013-04-14
TC 135
FDIS 19232-5:2013
Non-destructive testing Image quality of radiographs
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 84 15 março 2013

DOCUMENTOS
normativos
Part 5: Determination of the image unsharpness value
using duplex wire-type image quality indicators
Data Limite: 2013-04-14
TC 136
FDIS 4211-2:2013
Furniture Tests for surface finishes Part 2: Assessment of
resistance to wet heat
Data Limite: 2013-04-04
TC 136
FDIS 4211-3:2013
Furniture Tests for surface finishes Part 3: Assessment of
resistance to dry heat
Data Limite: 2013-04-04
TC 138
FDIS 11297-1:2013
Plastics piping systems for renovation of underground
drainage and sewerage networks under pressure Part 1:
General
Data Limite: 2013-03-17
TC 138
FDIS 11297-3:2013
Plastics piping systems for renovation of underground
drainage and sewerage networks under pressure Part 3:
Lining with close-fit pipes
Data Limite: 2013-03-17
TC 138
DIS 16422:2013
Pipes and joints made of oriented unplasticized
poly(vinyl chloride) (PVC-O) for the conveyance of water
under pressure Specifications
Data Limite: 2013-04-15
TC 138
DIS 17885:2012
Plastics piping systems Mechanical fittings for pressure
piping systems Specifications
Data Limite: 2013-03-10
TC 145
ISO 7010:2011 /FDAM 115:2013
Graphical symbols Safety colours and safety signs -
Registered safety signs AMENDMENT 115: Safety sign
E024: Evacuation temporary refuge
Data Limite: 2013-03-25
TC 145
DIS 9186-3:2012
Graphical symbols Test methods Part 3: Method for
testing referent association
Data Limite: 2013-03-10
TC 146
DIS 8672:2013
Air quality Determination of the number concentration
of airborne inorganic fibres by phase contrast optical
microscopy Membrane filter method
Data Limite: 2013-05-15
TC 147
DIS 5667-6:2013
Water quality Sampling Part 6: Guidance on sampling of
rivers and streams
Data Limite: 2013-04-13
TC 147
DIS 9308-1:2012
Water quality Enumeration of Escherichia coli and
coliform bacteria Part 1: Membrane filtration method for
waters with low bacterial background flora
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
Data Limite: 2013-04-22
TC 147
DIS 16308:2013
Water quality Determination of glyphosate and AMPA
Method using high performance liquid chromatography
(HPLC) with tandem mass spectrometric detection
Data Limite: 2013-05-11
TC 147
DIS 17994:2012
Water quality Requirements for the comparison of the
relative recovery of microorganisms by two quantitative
methods
Data Limite: 2013-03-04
TC 149
DIS 4210-1:2012
Cycles Safety requirements for bicycles Part 1: Terms
and definitions
Data Limite: 2013-04-08
TC 149
DIS 4210-2:2012
Cycles Safety requirements for bicycles Part 2:
Requirements for city and trekking, young adult,
mountain and racing bicycles
Data Limite: 2013-04-08
TC 149
DIS 4210-3:2012
Cycles Safety requirements for bicycles Part 3: Common
test methods
Data Limite: 2013-04-08
TC 149
DIS 4210-4:2012
Cycles Safety requirements for bicycles Part 4: Braking
test methods
Data Limite: 2013-04-08
TC 149
DIS 4210-5:2012
Cycles Safety requirements for bicycles Part 5: Steering
test methods
Data Limite: 2013-04-08
TC 149
DIS 4210-6:2012
Cycles Safety requirements for bicycles Part 6: Frame
and fork test methods
Data Limite: 2013-04-08
TC 149
DIS 4210-7:2012
Cycles Safety requirements for bicycles Part 7: Wheels
and rims test methods
Data Limite: 2013-04-08
TC 149
DIS 4210-8:2012
Cycles Safety requirements for bicycles Part 8: Pedals
and crank test methods
Data Limite: 2013-04-08
TC 149
DIS 4210-9:2012
Cycles Safety requirements for bicycles Part 9: Saddles
and seat-post test methods
Data Limite: 2013-04-08
TC 149
DIS 8098:2012
Cycles Safety requirements for bicycles for young
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 85 15 março 2013

DOCUMENTOS
normativos
children
Data Limite: 2013-03-04
TC 149
DIS 8098:2012
Cycles Safety requirements for bicycles for young
children
Data Limite: 2013-03-04
TC 150
DIS 12891-2:2013
Retrieval and analysis of surgical implants Part 2:
Analysis of retrieved surgical implants
Data Limite: 2013-05-14
TC 150
DIS 14243-4:2012
Implants for surgery Wear of total knee prostheses Part
4: Wear of the patella-femoral joint - Loading and
displacement parameters for wear-testing machines and
corresponding environmental conditions for test
Data Limite: 2013-03-10
TC 153
FDIS 28921-1:2013
Industrial valves Isolating valves for low-temperature
applications Part 1: Design, manufacturing and
production testing
Data Limite: 2013-03-16
TC 156
ISO 8044:1999 /DAM 1:2012
Corrosion of metals and alloys Basic terms and
definitions
AMENDMENT 1
Data Limite: 2013-03-25
TC 159
DIS 9241-391:2012
Ergonomics of Human System Interaction Part 391:
Requirements, analysis and compliance test methods for
the reduction of photosensitive seizures
Data Limite: 2013-05-06
TC 159
DIS 24504:2012
Ergonomics Accessible design Sound pressure levels of
spoken announcements for products and public address
systems
Data Limite: 2013-03-29
TC 160
DIS 11485-3:2012
Glass in building Curved glass Part 3: Requirements for
thermally tempered and laminated curved safety glass
Data Limite: 2013-03-14
TC 163
DIS 6781-3:2013
Performance of buildings Detection of heat, air and
moisture irregularities in buildings by infrared methods
Part 3: Qualifications of Equipment Operators, Data
Analysts and Report Writers
Data Limite: 2013-07-14
TC 164
ISO 12570:2000 /FDAM 1:2013
Hygrothermal performance of building materials and
products Determination of moisture content by drying
at elevated temperature AMENDMENT 1
Data Limite: 2013-04-21
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
TC 164
DIS 16808:2013
Metallic materials Sheet and strip Determination of
biaxial stress-strain curve ny means of bulge test with
optical measuring systems
Data Limite: 2013-06-10
TC 164
DIS 16842:2013
Metallic materials Sheet and strip Biaxial tensile
testing method using cruciform specimen
Data Limite: 2013-04-10
TC 164
DIS 17340:2013
Metallic materials Ductility testing High speed
compression test for porous and cellular metals
Data Limite: 2013-04-05
TC 165
DIS 10983:2013
Timber Finger joints Minimum production requirements
and testing methods
Data Limite: 2013-04-28
TC 165
DIS 13910:2013
Timber structures Strength graded timber Test methods
for structural properties
Data Limite: 2013-05-11
TC 165
DIS 17754:2013
Torsional Resistance of Driving in Screws
Data Limite: 2013-04-24
TC 172
DIS 10343:2012
Ophthalmic instruments Ophthalmometers
Data Limite: 2013-05-13
TC 172
ISO 12858-2:1999 /DAM 1:2013
Optics and optical instruments Ancillary devices for
geodetic instrument Part 2: Tripods
AMENDMENT 1
Data Limite: 2013-05-06
TC 173
DIS 16840-3:2013
Wheelchair seating Part 3: Determination of static, impact
and repetitive load strengths for postural support devices
Data Limite: 2013-04-22
TC 173
DIS 17049:2013
Accessible design Application of braille on signage,
equipment and appliances
Data Limite: 2013-04-23
TC 174
DIS 18323:2013
Jewellery Consumer confidence in the diamond industry
Data Limite: 2013-07-07
TC 176
FDIS 10008:2013
Quality Management Customer satisfaction Guidelines
for business-to-consumer electronic commerce
transactions
Data Limite: 2013-04-25
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 86 15 março 2013

DOCUMENTOS
normativos
TC 180
DIS 22975-3:2012
Solar Energy-Collector components and materials Part 3:
Absorber surface durability
Data Limite: 2013-03-10
TC 184
DIS 8000-100:2013
Data quality Part 100: Master data: Overview
Data Limite: 2013-04-24
TC 184
DIS 8000-120:2013
Data quality Part 120: Master data: Overview: Exchange
of characteristic data: Provenance
Data Limite: 2013-04-23
TC 184
DIS 8000-130:2013
Data quality Part 130: Master data: Overview: Exchange
of characteristic data: Accuracy
Data Limite: 2013-04-23
TC 184
DIS 8000-140:2013
Data quality Part 140: Master data: Overview: Exchange
of characteristic data: Completeness
Data Limite: 2013-04-23
TC 184
FDIS 9787:2013
Robots and robotic devices Coordinate systems and
motion nomenclatures
Data Limite: 2013-03-23
TC 184
FDIS 20140-1:2013
Automation systems and integration Evaluating energy
efficiency and other factors of manufacturing systems
that influence the environment Part 1: Overview and
general principles
Data Limite: 2013-03-23
TC 185
DIS 4126-6:2013
Safety devices for protection against excessive pressure
Part 6: Application, selection and installation of bursting
disc safety devices
Data Limite: 2013-07-14
TC 185
FDIS 4126-7:2013
Safety devices for protection against excessive pressure
Part 7: Common data
Data Limite: 2013-03-24
TC 188
DIS 6185-3:2013
Inflatable boats Part 3: Boats with a maximum motor
power rating of 15 kW and greater
Data Limite: 2013-07-14
TC 188
ISO 12215-5:2008 /DAM 1:2012
Small craft Hull construction and scantlings Part 5:
Design pressures for monohulls, design stresses,
scantlings determination
AMENDMENT 1
Data Limite: 2013-03-04
TC 188
DIS 16315:2012
Small craft Electric propulsion system
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
Data Limite: 2013-03-25
TC 190
DIS 14388-1:2013
Soil quality Acid-base accounting procedure for acid
sulfate soils Part 1: Introduction and definitions,
symbols and acronyms, sampling and sample preparation
Data Limite: 2013-05-06
TC 190
DIS 14388-2:2013
Soil quality Acid-base accounting procedure for acid
sulfate soils Part 2: Chromium reducible sulfur (CRS)
methodology
Data Limite: 2013-05-06
TC 190
DIS 17184:2013
Soil quality Determination of carbon and nitrogen by
near infrared spectrometry
Data Limite: 2013-07-07
TC 194
DIS 10993-3:2013
Biological evaluation of medical devices Part 3: Tests for
genotoxicity, carcinogenicity and reproductive toxicity
Data Limite: 2013-04-14
TC 198
DIS 11137-2:2013
Sterilization of health care products Radiation Part 2:
Establishing the sterilization dose
Data Limite: 2013-04-24
TC 198
ISO 13408-1:2008 /FDAM 1:2013
Aseptic processing of health care products Part 1:
General requirements
AMENDMENT 1
Data Limite: 2013-03-17
TC 201
ISO 18115-1:2010 /DAM 1:2012
Surface chemical analysis Vocabulary Part 1: General
terms and terms used in spectroscopy
AMENDMENT 1
Data Limite: 2013-03-05
TC 204
DIS 11270:2013
Intelligent transport systems Lane keeping assistance
systems (LKAS) Performance requirements and test
procedures
Data Limite: 2013-05-11
TC 204
FDIS 22839:2013
Intelligent transport systems Forward vehicle collision
mitigation systems Operation, performance, and
verification requirements
Data Limite: 2013-04-20
TC 204
DIS 26684:2013
Intelligent transport systems Cooperative intersection
signal information and violation warning systems
(CIWS) Performance requirements and test procedures
Data Limite: 2013-05-11
TC 206
DIS 17095:2012
Fine ceramics (advanced ceramics, advanced technical
ceramics) Test method for interfacial bond strength of
ceramic materials at elevated temperatures
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 87 15 março 2013

DOCUMENTOS
normativos
Data Limite: 2013-03-12
TC 206
DIS 17172:2013
Fine ceramics (advanced ceramics, advanced technical
ceramics) Determination of compaction properties of
ceramic powders
Data Limite: 2013-04-21
TC 212
FDIS 15197:2013
In vitro diagnostic test systems Requirements for
blood-glucose monitoring systems for self-testing in
managing diabetes mellitus
Data Limite: 2013-04-07
TC 213
DIS 16610-30:2013
Geometrical product specifications (GPS) Filtration Part
30: Robust profile filters: Basic concepts
Data Limite: 2013-04-08
TC 213
DIS 16610-32:2013
Geometrical product specifications (GPS) Filtration Part
32: Robust profile filters: Spline filters
Data Limite: 2013-04-08
TC 213
DIS 17701:2013
Footwear Test methods for uppers, lining and insocks
Colour migration
Data Limite: 2013-07-14
TC 213
DIS 25178-1:2013
Geometrical product specifications (GPS) Surface texture:
Areal Part 1: Indication of surface texture
Data Limite: 2013-06-24
TC 213
FDIS 25178-604:2013
Geometrical product specifications (GPS) Surface
texture: Areal Part 604: Nominal characteristics of
non-contact (coherence scanning interferometry)
instruments
Data Limite: 2013-04-14
TC 213
DIS 25178-606:2013
Geometrical product specification (GPS) Surface texture:
Areal Part 606: Nominal characteristics of non-contact
(focus variation) instruments
Data Limite: 2013-04-24
TC 214
FDIS 18878:2013
Mobile elevating work platforms Operator (driver)
training
Data Limite: 2013-04-26
TC 215
DIS 13940:2012
Health informatics System of concepts to support
continuity of care
Data Limite: 2013-05-13
TC 215
FDIS 17090-1:2013
Health informatics Public key infrastructure Part 1:
Overview of digital certificate services
Data Limite: 2013-03-17
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
TC 215
FDIS 21549-1:2013
Health informatics Patient healthcard data Part 1:
General structure
Data Limite: 2013-03-31
TC 216
DIS 10734:2013
Footwear Test method for slide fasteners Strength of slide
fastener pullers
Data Limite: 2013-06-17
TC 216
DIS 10750:2013
Footwear Test method for slide fasteners Attachment
strength of end stops
Data Limite: 2013-06-17
TC 216
DIS 10751:2013
Footwear Test methods for slide fasteners Resistance to
repeated opening and closing
Data Limite: 2013-06-17
TC 216
DIS 10764:2013
Footwear Test methods for slide fasteners Lateral
strength
Data Limite: 2013-06-17
TC 216
DIS 17694:2013
Footwear Test methods for uppers and lining Flex
resistance
Data Limite: 2013-06-17
TC 216
DIS 17697:2013
Footwear Test methods for uppers, lining and insocks
Seam strength
Data Limite: 2013-06-17
TC 216
DIS 17698:2013
Footwear Test methods for uppers Delamination
resistance
Data Limite: 2013-06-17
TC 216
DIS 18403:2013
Footwear Test methods for slide fasteners Resistance to
damage during closure under a lateral force
Data Limite: 2013-06-17
TC 216
DIS 22649:2013
Footwear Test methods for insoles and insocks Water
absorption and desorption
Data Limite: 2013-06-17
TC 218
DIS 13061-1:2013
Physical and mechanical properties of wood Test methods
for small clear specimen Part 1: Determination of
moisture content for physical and mechanical tests
Data Limite: 2013-05-18
TC 218
DIS 13061-2:2013
Physical and mechanical properties of wood Test methods
for small clear specimen Part 2:Determination of density
for physical and mechanical tests
Data Limite: 2013-05-18
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 88 15 março 2013

DOCUMENTOS
normativos
TC 218
DIS 13061-3:2013
Physical and mechanical properties of wood Test methods
for small clear specimen Part 3: Determination of
ultimate strength in static bending
Data Limite: 2013-05-18
TC 218
DIS 13061-6:2013
Physical and mechanical properties of wood Test methods
for small clear specimen Part 6: Determination of ultimate
tensile stress parallel to grain
Data Limite: 2013-05-18
TC 218
DIS 13061-7:2013
Physical and mechanical properties of wood Test methods
for small clear specimen Part 7: Determination of ultimate
tensile stress perpendicular to grain
Data Limite: 2013-05-18
TC 223
DIS 22322:2013
Societal security Emergency management Public warning
Data Limite: 2013-04-09
TC 226
DIS 2926:2013
Aluminium oxide used for the production of primary
aluminium Particle size analysis for the range 45 ìm to
150 ìm Method using electroformed sieves
Data Limite: 2013-05-18
TC 226
DIS 10143:2013
Carbonaceous materials for the production of aluminium
Calcined coke for electrodes Determination of the
electrical resistivity of granules
Data Limite: 2013-04-28
TC 228
DIS 24801-1:2012
Recreational diving services - Requirements for the
training of recreational scuba divers Part 1: Level 1-
Supervised diver
Data Limite: 2013-03-04
TC 228
DIS 24801-2:2012
Recreational diving services - Requirements for the
training of recreational scuba divers Part 2: Level 2 -
Autonomous diver
Data Limite: 2013-03-04
TC 228
DIS 24801-3:2012
Recreational diving services - Requirements for the
training of recreational scuba divers Part 3: Level 3 -
Dive leader
Data Limite: 2013-03-04
TC 228
DIS 24802-1:2012
Recreational diving services - Requirements for the
training of recreational scubadivers Part 1: Level 1 -
Supervised diver
Data Limite: 2013-03-04
TC 228
DIS 24802-2:2012
Recreational diving services - Requirements for the
training of recreational scuba divers Part 2: Level 2 -
Autonomous diver
Data Limite: 2013-03-04
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
TC 238
DIS 16559:2013
Solid biofuels Terminology, definitions and descriptions
Data Limite: 2013-07-01
TC 238
DIS 16948:2013
Solid biofuels Determination of total content of carbon,
hydrogen and nitrogen
Data Limite: 2013-07-01
TC 238
DIS 16967:2013
Solid biofuels Determination of major elements Al, Ca,
Fe,
Mg, P, K, Si, Na and Ti
Data Limite: 2013-07-01
TC 238
DIS 16968:2013
Solid biofuels Determination of minor elements As, Cd,
Co, Cr, Cu, Hg, Mn, Mo, Ni, Pb, Sb, V and Zn
Data Limite: 2013-07-01
TC 238
DIS 17225-1:2012
Solid biofuels Fuel specifications and classes Part 1:
General requirements
Data Limite: 2013-03-08
TC 238
DIS 17225-2:2012
Solid biofuels Fuel specifications and classes Part 2:
Graded wood pellets
Data Limite: 2013-03-08
TC 238
DIS 17225-6:2012
Solid biofuels Fuel specifications and classes Part 6:
Graded non-woody pellets
Data Limite: 2013-03-08
TC 244
DIS 13577-2:2013
Industrial furnaces and associated processing equipment
Safety Part 2: Combustion and fuel handling systems
Data Limite: 2013-05-23
TC 261
FDIS 52915:2012
Standard specification for additive manufacturing file
format (AMF) Version 1.11
Data Limite: 2013-03-26
TC 261
FDIS 52921:2012
Standard terminology for additive manufacturing—
Coordinate systems and test methodologies
Data Limite: 2013-03-26
TC IULTCS
DIS 2588:2012
Leather Sampling Number of items for a gross sample
Data Limite: 2013-03-04
TC IIW
FDIS 6847:2012
Welding consumables Deposition of a weld metal pad for
chemical analysis
Data Limite: 2013-03-20
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 89 15 março 2013

DOCUMENTOS
normativos
TC IIW
DIS 10447:2013
Resistance welding Peel and chisel testing of resistance
spot and projection welds
Data Limite: 2013-06-17
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
TC IIW
DIS 14272:2013
Specimen dimensions and procedure for cross tension
testing resistance spot and embossed projection welds
Data Limite: 2013-06-17
TC IIW
DIS 14273:2013
Specimen dimensions and procedure for shear testing
resistance spot, seam and embossed projection welds
Data Limite: 2013-06-17
TC IIW
DIS 14323:2013
Resistance spot welding and projection welds Destructive
testing of welds Specimen dimensions and procedure for
impact shear test and cross-tension testing
Data Limite: 2013-06-17
TC IIW
DIS 14373:2013
Resistance welding Procedure for spot welding of
uncoated and coated low carbon steels
Data Limite: 2013-06-17
TC IULTCS
FDIS 17130:2013
Leather Physical and mechanical tests Determination of
dimensional change
Data Limite: 2013-03-24
TC IULTCS
DIS 17228:2012
Leather Tests for colour fastness Change in colour with
accelerated ageing
Data Limite: 2013-04-29
TC IULTCS
DIS 17234-1:2012
Leather Chemical tests for the determination of certain
azo colorants in dyed leathers Part 1: Determination of
certain aromatic amines derived from azo colorants
Data Limite: 2013-03-04
TC IULTCS
FDIS 17502:2013
Leather Determination of surface reflectance
Data Limite: 2013-03-24
TC IULTCS
DIS 18219:2012
Leather Determination of chlorinated hydrocarbons in
leather Chromatographic method for short-chain
chlorinated paraffins (SCCP)
Data Limite: 2013-04-29
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 90 15 março 2013

Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
9.2 Comités Técnicos da ISO
Lista dos Comités Técnicos da Organização Internacional de Normalização (ISO) em relação aos
quais não existe ONS (Organismo de Normalização Sectorial) ou CT (Comissão Técnica) e cujos
processos se encontram disponíveis para consulta no IPQ
ISO/TC 4
Rolling bearings
ISO/TC 12
Quantities, units, symbols, conversion factors
ISO/TC 14
Shafts for machinery and accessories
ISO/TC 19
Preferred numbers
ISO/TC 20
Aircraft and space vehicles
ISO/TC 24
Sieves, sieving and other sizing methods
ISO/TC 25
Cast iron and pig iron
Manganese and chromium ores
ISO/TC 67
Materials, equipment and offshore structures
for petroleum and natural gas industries
ISO/TC 70
Internal combustion engines
ISO/TC 81
Common names for pesticides and other
agrochemicals
ISO/TC 83
Sports and recreation equipment
ISO/TC 85
Nuclear energy
ISO/TC 86
Refrigeration
ISO/TC 36
Cinematography
ISO/TC 37
Terminology (principles and coordination)
ISO/TC 41
Pulleys and belts (including veebelts)
ISO/TC 42
Photography
ISO/TC 47
Chemistry
ISO/TC 48
Laboratory glassware and related apparatus
ISO/TC 57
Metrology and properties of surfaces
ISO/TC 59
Building construction
ISO/TC 60
Gears
ISO/TC 65
ISO/TC 100
Chains and chain wheels for power
transmission and conveyors
ISO/TC 101
Continuous mechanical handling equipment
ISO/TC 102
Iron ores
ISO/TC 110
Industrial trucks
ISO/TC 112
Vacuum technology
ISO/TC 113
Hydrometric determinations
ISO/TC 114
Horology
ISO/TC 115
Pumps
ISO/TC 116
Space heating appliances
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 91 15 março 2013

DOCUMENTOS
normativos
ISO/TC 117
Industrial fans
ISO/TC 118
Compressors, pneumatic tools and
pneumatic machines
ISO/TC 119
Powder metallurgy
ISO/TC 120
Leather
ISO/TC 123
Plain bearings
ISO/TC 127
Earth-moving machinery
ISO/TC 131
Fluid power systems
ISO/TC 132
Ferroalloys
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
Technical systems and aids for disabled or
handicapped persons
ISO/TC 174
Jewellery
ISO/TC 175
Fluorspar
ISO/TC 177
Caravans
ISO/TC 179
Masonry
ISO/TC 182
Geotechnics
ISO/TC 183
Copper, lead and zinc ores and concentrates
ISO/TC 184
Industrial automation systems and integration
ISO/TC 185
Safety devices for protection against
excessive pressure
ISO/TC 137
Sizing system, designations and marking for
boots and shoes
ISO/TC 153
Valves
ISO/TC 154
Documents and data elements in
administration, commerce and industry
ISO/TC 155
Nickel and nickel alloys
ISO/TC 163
Thermal insulation
ISO/TC 166
Ceramic ware, glassware and glass ceramic
ware in contact with food
ISO/TC 167
Steel and aluminium structures
ISO/TC 170
Surgical instruments
ISO/TC 173
ISO/TC 190
Soil quality
ISO/TC 191
Humane animal (mammal) traps
ISO/TC 192
Gas turbines
ISO/TC 195
Building construction machinery and
equipment
ISO/TC 197
Hydrogen energy technologies
ISO/TC 202
Microbeam analysis
ISO/TC 203
Technical energy systems
ISO/TC 204
Transport information and control systems
ISO/TC 205
Building environmental design
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 92 15 março 2013

DOCUMENTOS
normativos
ISO/TC 206
Fine ceramics
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
ISO/TC 207
Management environnemental
ISO/TC 208
Thermal turbines for industrial application
(steam turbines, gas expansion turbines)
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 93 15 março 2013

Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
10. Projetos de normas e propostas de estudo de novas normas da Comissão
Eletrotécnica Internacional (IEC)
Os projetos de normas e propostas de estudo de novas normas estão organizadas por Comités
Técnicos.
10.1 Projetos em inquérito público
Para cada referência menciona-se a designação codificada, o título e a data limite para a
apresentação de comentários.
SC 3D
CDV 62656-3:2013
Standardized product ontology register and transfer by
spreadsheets Part 3:Interface for Common Information
Model
Data Limite: 2013-05-17
SC 17B
IEC 60947-1:2007 /CDV A2:2013
Low-voltage switchgear and controlgear Part 1:General
rules
Data Limite: 2013-05-24
SC 17B
IEC 60947-4-3:1999 /CDV A3:2013
Low-voltage switchgear and controlgear Part
4-3:Contactors and motor-starters - AC semiconductor
controllers and contactors for non-motor load
Data Limite: 2013-05-10
SC 17D
FDIS 61439-7:2013
Low-voltage switchgear and controlgear assemblies Part
7:Assemblies for specific applications such as marinas,
camping sites, market squares, electric vehicles charging
stations
Data Limite: 2013-04-05
SC 17A
IEC 62271-109:2008 /FDIS A1:2013
Highvoltage switchgear and controlgear Part
109:Alternating current series capacitor by-pass switches
Data Limite: 2013-05-03
SC 22H
FDIS 62040-4:2013
Uninterruptible power systems (UPS) Part
4:Environnemental aspects - Requirements and reporting
Data Limite: 2013-04-05
SC 23H
CDV 62196-3:2013
Plugs, socket-outlets and vehicle couplers - conductive
charging of electric vehicles Part 3: Dimensional
compatibility and interchangeability requirements for d.c.
and a.c./d.c. pin and tube-tyoe contact vehicle couplers
Data Limite: 2013-04-12
SC 34B
IEC 60061-1:1969 /CDV A50:2013
Lamp caps and holders together with gauges for the
control of interchangeability and safety Part 1: Lamp
caps
Data Limite: 2013-04-12
control of interchangeability and safety Part 1:Lamp caps
Data Limite: 2013-05-17
SC 34B
IEC 60061-2:1969 /CDV A47:2013
Lamp caps and holders together with gauges for the
control of interchangeability and safety Part 2:
Lampholders
Data Limite: 2013-04-12
SC 34B
IEC 60061-2:1969 /CDV A48:2013
Lamp caps and holders together with gauges for the
control of interchangeability and safety Part
2:Lampholders
Data Limite: 2013-05-17
SC 34B
IEC 60061-3:1969 /CDV A48:2013
Lamp caps and holders together with gauges for the
control of interchangeability and safety Part 3: Gauges
Data Limite: 2013-04-12
SC 34B
IEC 60061-3:1969 /CDV A49:2013
Lamp caps and holders together with gauges for the
control of interchangeability and safety Part 3: Gauges
Data Limite: 2013-05-17
SC 34D
FDIS 60598-2-8:2013
Luminaires Part 2-8:Particular requirements - Handlamps
Data Limite: 2013-04-12
SC 34D
FDIS 60598-2-12:2013
Luminaires Part 2-12:Particular requirements - Mains
socket-outlet mounted nightlights
Data Limite: 2013-04-12
SC 34A
IEC 60630:1994 /CDV A7:2013
Maximum lamp outlines for incandescent lamps
Data Limite: 2013-04-19
SC 34C
IEC 61347-1:2007 /CDV A3:2013
Lamp controlgear Part 1:General and safety requirements
Data Limite: 2013-05-24
SC 34D
CDV 62722-1:2013
Luminaire performance Part 1: General requirements
Data Limite: 2013-04-12
SC 34B
IEC 60061-1:1969 /CDV A51:2013
Lamp caps and holders together with gauges for the
SC 34A
CDV 62776:2013
Double-capped LED lamps for general lighting services -
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 94 15 março 2013

DOCUMENTOS
normativos
Safety specifications
Data Limite: 2013-05-24
SC 37B
FDIS 61643-312:2013
Components for low-voltage surge protective devices Part
312:Selection and application principles for gas
discharge tubes
Data Limite: 2013-03-22
SC 45B
CDV 61005:2013
Radiation protection instrumentation - Neutron ambient
dose equivalent (rate) meters
Data Limite: 2013-04-05
SC 45B
FDIS 61275:2013
Radiation protection instrumentation - Measurement of
discrete radionuclides in the environment - In situ
photon spectrometry system using a germanium detector
Data Limite: 2013-05-03
SC 45A
CDV 62645:2012
Nuclear power plants - Instrumentation and control
systems - Requirements for security programmes for
computer-based systems
Data Limite: 2013-03-01
SC 45A
FDIS 62651:2013
Nuclear power plants - Instrumentation important to
safety - Thermocouples: Characteristics and test methods
Data Limite: 2013-03-22
SC 45B
CDV 62694:2013
Radiation protection instrumentation - Backpack-type
radiation detector (BRD) for detection of illicit
trafficking of radioactive material
Data Limite: 2013-05-17
SC 46A
CDV 61196-1-111:2013
Coaxial communication cables Part 1-111: Electrical test
methods - Stability of phase test methods
Data Limite: 2013-04-12
SC 46A
CDV 61196-9:2013
Coaxial communication cables Part 9: Sectional
specification for RF flexible cables
Data Limite: 2013-04-12
SC 46A
CDV 61726:2013
Cable assemblies, cables, connectors and passive
microwave components - Screening attenuation
measurement by the reverberation chamber method
Data Limite: 2013-05-17
SC 47E
FDIS 60747-16-5:2013
Semiconductor devices Part 16-5:Microwave integrated
circuits - Oscillators
Data Limite: 2013-05-03
SC 48D
CDV 61587-5:2013
Mechanical structures for electronic equipment-tests
for IEC 60917 and IEC 60297
Part 5:Seismic tests for chassis, subracks, and plug-in
units
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
Data Limite: 2013-06-14
SC 61H
IEC 60335-2-76:2002 /FDIS A2:2013
Household and similar electrical appliances - Safety Part
2-76:Particular requirements for electric fence energizers
Data Limite: 2013-04-26
SC 62D
IEC 60601-2-52:2009 /CDV A1:2013
Medical electrical equipment Part 2-52:Particular
requirements for the basic safety and essential
performance of medical beds
Data Limite: 2013-04-26
SC 62C
CDV 60601-2-64:2013
Medical electrical equipment Part 2-64: Particular
requirements for the basic safety and essential
performance of light ion beam medical equipment
Data Limite: 2013-04-05
SC 62B
CDV 62220-1-1:2013
Medical electrical equipment - Characteristics of digital
x-ray imaging devices Part 1-1:Determination of the
detective quantum efficiency - Detectors used in
radiographic imaging
Data Limite: 2013-05-24
SC 62D
CDV 80601-2-69:2012
Medical electrical equipment Part 2-69: Particular
requirements for basic safety and essential performance
of oxygen concentrator equipment
Data Limite: 2013-03-22
SC 65B
FDIS 61514-2:2013
Industrial Process Control Systems Part 2:Methods of
evaluating the performance of intelligent valve
positioners with pneumatic outputs
Data Limite: 2013-05-03
SC 65E
CDV 61987-12:2012
Industrial Process Measurement and Control - Data
Structures and Elements in Process Equipment Catalogues
Part 12: Lists of properties (LOP for flow measuring
equipment for electronic data exchange
Data Limite: 2013-03-01
SC 65E
FDIS 62264-1:2013
Enterprise system integration Part 1: Models and
terminology
Data Limite: 2013-03-15
SC 65E
FDIS 62264-2:2013
Enterprise system integration Part 2:Object models and
attributes
Data Limite: 2013-05-03
SC 65A
CDV 62682:2013
Management alarms for the process industries
Data Limite: 2013-04-26
SC 65B
FDIS 62703:2013
Expression of performance of fluorometric oxygen
analyzers in liquid media
Data Limite: 2013-05-03
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 95 15 março 2013

DOCUMENTOS
normativos
SC 77A
IEC 61000-3-2:2005 /CDV A3:2013
Electromagnetic compatibility (EMC) Part 3-2:Limits -
Limits for harmonic current emissions (equipment input
current < 16 A per phase)
Data Limite: 2013-05-17
SC 77A
FDIS 61000-3-3:2013
Electromagnetic compatibility (EMC) Part 3-3:Limits -
Limitation of voltage changes, voltage fluctuations and
flicker in public low-voltage supply systems, for
equipment with rated current < 16 A per phase and not
subject to conditional connection
Data Limite: 2013-04-12
SC 86A
CDV 60794-1-2:2012
Optical fibre cables Part 1-2:Generic specification -Cross
reference table for optical cable test procedures
Data Limite: 2013-03-01
SC 86A
CDV 60794-1-20:2012
Optical fibre cables Part 1-20: Generic specification -
Basic optical cable test procedures - General and
Definitions
Data Limite: 2013-03-01
SC 86A
CDV 60794-2-51:2013
Optical fibre cables Part 2-51: Indoor optical fibre
cables - Detail specification for simplex and duplex
cables for use in cords for controlled environment
Data Limite: 2013-04-05
SC 86A
CDV 60794-5-10:2013
Optical fibre cables Part 5-10:Family specification for
outdoor microduct optical fibre cables, microducts and
protected microducts for installation by blowing
Data Limite: 2013-05-10
SC 86A
CDV 60794-5-20:2013
Optical fibre cables Part 5-20:Family specification for
outdoor microduct fibre units, microducts and protected
microducts for installation by blowing
Data Limite: 2013-05-10
SC 86B
FDIS 61300-2-7:2013
Fibre optic interconnecting devices and passive
components - Basic test and measurement procedures
Part 2-7:Tests - Bending moment
Data Limite: 2013-04-12
SC 86B
CDV 61300-2-15:2013
Fibre optic interconnecting devices and passive
components - Basic test and measurement procedures
Part 2-15:Tests - Torque strength of coupling mechanism
Data Limite: 2013-05-24
SC 86B
CDV 61300-2-35:2013
Fibre optic interconnecting devices and passive
components - Basic test and measurement procedures Part
2-35: Tests - Cable nutation
Data Limite: 2013-04-05
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
SC 86B
CDV 61300-2-42:2013
Fibre optic interconnecting devices and passive
components - Basic test and measurement procedures Part
2-42: Tests - Static side load for strain relief
Data Limite: 2013-04-05
SC 86B
CDV 61300-3-25:2013
Fibre optic interconnecting devices and passive
components - Basic test and measurement procedures Part
3-25:Examinations and measurements - Concentricity of
the non-angled ferrules and non-angled ferrules with fibre
installed
Data Limite: 2013-05-03
SC 86B
CDV 61300-3-48:2012
Fibre optic interconnecting devices and passive
components - Basic test and measurement procedures Part
3-48: Measurement: Spring compression force of the
coupling sleeve for rectangular ferrule multi-fibre
connectors
Data Limite: 2013-03-01
SC 86B
FDIS 61300-3-50:2013
Fibre optic interconnecting devices and passive
components - Basic test and measurement procedures Part
3-50:Examinations and measurements - Crosstalk for
optical spatial switches
Data Limite: 2013-04-19
SC 86B
CDV 61753-031-2:2013
Fibre optic interconnecting devices and passive
components - Performance standard Part
031-2:Non-connectorised single-mode 1×N and 2×N
non-wavelength-selective branching devices for Category
C - Controlled environment
Data Limite: 2013-06-07
SC 86B
CDV 61753-031-3:2013
Fibre optic interconnecting devices and passive
components - Performance standard Part
031-3:Non-connectorised single-mode 1×N and 2×N
non-wavelength-selective branching devices for
Category U - Uncontrolled environment
Data Limite: 2013-06-07
SC 86B
CDV 61753-031-6:2013
Fibre optic interconnecting devices and passive
components - Performance standard Part
031-6:Non-connectorised single-mode 1xN and 2xN
non-wavelength-selective branching devices for
Category O - Uncontrolled environment
Data Limite: 2013-06-07
SC 86B
CDV 61754-1:2012
Fibre optic interconnecting devices and passive
components - Fibre optic connector interfaces Part 1:
General and guidance
Data Limite: 2013-03-01
SC 86B
FDIS 61754-27:2013
Fibre optic interconnecting devices and passive
components - Fibre optic connector interfaces Part
27
:Type M12-FO connector family
Data Limite: 2013-04-26
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 96 15 março 2013

DOCUMENTOS
normativos
SC CISPR/B
CDV 11:2013
Industrial, scientific and medical equipment -
Radio-frequency disturbance characteristics - Limits
and methods of measurement - Supplement of CISPR 11
with the APD method and associated limits for
assessment of fluctuating RF disturbances in the range
above 1 GHz
Data Limite: 2013-05-03
SC CISPR/F
CISPR 15:2005 /FDIS A3:2013
Limits and methods of measurement of radio disturbance
characteristics of electrical lighting and similar equiment
Data Limite: 2013-04-19
SC CISPR/A
CISPR 16-2-3:2010 /CDV A2:2013
Revision of CISPR 16-2-3 on the application of CMADs
Data Limite: 2013-05-17
TC 1
CDV 60050-815:2012
International Electrotechnical Vocabulary Part 815:
Superconductivity
Data Limite: 2013-03-15
TC 2
CDV 60034-2-1:2013
Rotating electrical machines Part 2-1: Standard methods
for determining losses and efficiency from tests
(excluding machines for traction vehicles)
Data Limite: 2013-04-05
TC 4
FDIS 62364:2013
Hydraulic machines - Guide for dealing with
hydro-abrasive erosion in Kaplan, Francis, and Pelton
turbines
Data Limite: 2013-05-10
TC 7
FDIS 62641:2013
Conductors for overhead lines - Aluminium and aluminium
alloy wires for concentric lay stranded conductors
Data Limite: 2013-04-05
TC 9
FDIS 62718:2013
Railway applications - Rolling stock - DC supplied
electronic ballasts for lighting fluorescent lamps
Data Limite: 2013-03-22
TC 13
FDIS 62056-5-3:2013
Electricity metering data exchange - The DLMS/COSEM
suite Part 5-3:DLMS/COSEM application layer
Data Limite: 2013-04-19
TC 13
FDIS 62056-6-1:2013
Electricity metering data exchange - The DLMS/COSEM
suite Part 6-1:Object identification system (OBIS)
Data Limite: 2013-04-19
TC 13
FDIS 62056-6-2:2013
Electricity metering data exchange - The DLMS/COSEM
suite
Part 6-2:COSEM interface classes
Data Limite: 2013-04-19
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
TC 13
FDIS 62056-7-6:2013
Electricity metering data exchange - The DLMS/COSEM
suite
Part 7-6:The 3-layer, connection-oriented HDLC based
communication profile
Data Limite: 2013-04-19
TC 13
FDIS 62056-8-3:2013
Electricity metering data exchange - The DLMS/COSEM
suite Part 8-3:PLC S-FSK communication profile for
neighbourhood networks
Data Limite: 2013-04-19
TC 13
FDIS 62056-9-7:2013
Electricity metering data exchange - the DLMS/COSEM
suite Part 9-7: Communication profile for TCP-UDP/IP
networks
Data Limite: 2013-03-15
TC 14
FDIS 60076-3:2013
Power transformers Part 3:Insulation levels, dielectric
tests and external clearances in air
Data Limite: 2013-05-03
TC 15
CDV 60455-2:2012
Resin based reactive compounds used for electrical
insulation
Part 2: Methods of test
Data Limite: 2013-03-15
TC 15
FDIS 60455-3-8:2013
Resin based reactive compounds used for electrical
insulation Part 3:Specifications for individual materials
Sheet 8:Resins for cable accessories
Data Limite: 2013-04-05
TC 15
CDV 60684-3-284:2013
Flexible insulating sleeving Part 3:Specifications for
individual types of sleeving Sheet 284:Heat-shrinkable,
sleevings, for oil barrier applications
Data Limite: 2013-05-10
TC 15
CDV 60684-3-285:2013
Flexible insulating sleeving
Part 3:Specifications for individual types of sleeving
Sheet 285:Heat-shrinkable polyolefin sleeving, for
medium voltage joint insulation
Data Limite: 2013-05-10
TC 15
FDIS 61212-3-1:2013
Insulating materials - Industrial rigid round laminated
tubes and rods based on thermosetting resins for
electrical purposes Part 3:Specifications for individual
materials Sheet 1:Round laminated rolled tubes
Data Limite: 2013-04-05
TC 15
FDIS 61212-3-2:2013
Insulating materials - Industrial rigid round laminated
tubes and rods based on thermosetting resins for
electrical purposes Part 3:Specifications for individual
materials Sheet 2:Round laminated moulded tubes
Data Limite: 2013-04-05
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 97 15 março 2013

DOCUMENTOS
normativos
TC 18
CDV 60092-501:2013
Electrical installations in ships
Part 501:Special features - Electric propulsion plant
Data Limite: 2013-04-19
TC 18
CDV 61892-6:2012
Mobile and fixed offshore units - Electrical installations
Part 6: Installation
Data Limite: 2013-03-01
TC 18
CDV 16315:2012
Small craft - Electrical propulsion system
Data Limite: 2013-03-29
TC 20
IEC 62230:2006 /CDV A1:2013
Electric cables - Spark-test method
Data Limite: 2013-05-10
TC 21
FDIS 61427-1:2013
Secondary cells and batteries for renewable energy
storage - General requirements and methods of test Part
1:Photovoltaic off-grid application
Data Limite: 2013-04-12
TC 26
FDIS 60974-5:2013
Arc welding equipment Part 5:Wire feeders
Data Limite: 2013-05-03
TC 27
FDIS 60519-12:2013
Safety in electroheating installations Part 12:Particular
requirements for infrared electroheating installations
Data Limite: 2013-03-29
TC 27
CDV 62693:2012
Industrial electroheating installations - Test methods for
infrared electroheating installations
Data Limite: 2013-03-01
TC 28
CDV 60071-5:2013
Insulation co-ordination Part 5:Procedures for
high-voltage direct current (HVDC) converter stations
Data Limite: 2013-05-03
TC 29
CDV 60318-3:2013
Electroacoustics - Simulators of human head and ear Part
3: Acoustic coupler for the calibration of supra-aural
earphones used in audiometry
Data Limite: 2013-04-12
TC 31
CDV 60079-18:2013
Explosive atmospheres Part 18:Equipment protection by
encapsulation ""m""
Data Limite: 2013-06-07
TC 31
CDV 60079-26:2013
Explosive atmospheres Part 26: Equipment with
equipment protection level (EPL) G
Data Limite: 2013-04-12
TC 31
CDV 60079-29-2:2013
Explosive atmospheres Part 29-2: Gas detectors -
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
Selection, installation, use and maintenance of
detectors for flammable gases and oxygen
Data Limite: 2013-04-12
TC 33
IEC 60252-1:2010 /CDV A1:2012
AC motor capacitors
Part 1: General - Performance, testing and rating -
Safety requirements - Guidance for installation
andoperation
Data Limite: 2013-03-01
TC 33
IEC 60252-2:2010 /CDV A1:2012
AC motor capacitors
Part 2: Motor start capacitors
Data Limite: 2013-03-01
TC 37
FDIS 60099-5:2013
Surge arresters Part 5:Selection and application
recommendations
Data Limite: 2013-04-19
TC 38
CDV 61869-6:2012
Instruments transformers Part 6: Additional general
requirements for Low Power Instrument Transformers
Data Limite: 2013-03-22
TC 38
CDV 61869-9:2012
Instrument Transformers Part 9: Digital interface for
instrument transformers
Data Limite: 2013-03-01
TC 40
FDIS 60286-3:2013
Packaging of components for automatic handling Part
3:Packaging of surface mount components on continuous
tapes
Data Limite: 2013-04-26
TC 40
FDIS 60384-14:2013
Fixed capacitors for use in electronic equipment Part
14:Sectional specification - Fixed capacitors for
electromagnetic interference suppression and connection
to the supply mains
Data Limite: 2013-04-26
TC 44
FDIS 60204-31:2013
Safety of machinery - Electrical equipment of machines
Part 31: Particular safety and EMC requirements for
sewing machines, units and systems
Data Limite: 2013-03-15
TC 46
CDV 62153-4-4:2013
Metallic communication cable test methods Part
4-4:Electro Magnetic Compatibility (EMC) - Shielded
screening attenuation, test method for measuring of the
screening attenuation ""as "" up to and above 3 GHz
Data Limite: 2013-05-17
TC 47
FDIS 60749-26:2013
Semiconductor devices - Mechanical and climatic test
methods Part 26:Electrostatic discharge (ESD)
sensitivity testing - Human body model (HBM)
Data Limite: 2013-03-22
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 98 15 março 2013

DOCUMENTOS
normativos
TC 47
CDV 60749-28:2013
Semiconductor devices - Mechanical and climatic test
methods Part 28:Electrostatic Discharge (ESD)
Sensitivity Testing Direct contact charged device
model (DC-CDM)
Data Limite: 2013-06-14
TC 49
CDV 62761:2012
Guidelines for the measurement method of nonlinearity
for surface acoustic wave (SAW) and bulk acoustic wave
(BAW) devices in radio frequency (RF)
Data Limite: 2013-03-01
TC 56
FDIS 61710:2013
Power law model - Goodness-of-fit tests and estimation
methods
Data Limite: 2013-04-19
TC 56
CDV 62198:2013
Managing risk in projects - Application guidelines
Data Limite: 2013-05-10
TC 57
FDIS 61970-301:2013
Energy Management System Application Program
Interface (EMS-API) Part 301:Common Information
Model (CIM) Base
Data Limite: 2013-04-12
TC 57
FDIS 61970-456:2013
Energy management system application program interface
(EMS-API) Part 456:Solved power system state profiles
Data Limite: 2013-03-29
TC 57
FDIS 62325-450:2013
Framework for energy market communications Part
450:Profile and context modelling rules
Data Limite: 2013-03-22
TC 61
IEC 60335-1:2010 /CDV A1:2013
Household and similar electrical appliances - Safety Part
1:General requirements
Data Limite: 2013-04-26
TC 61
CDV 60335-2-6:2013
Household and similar electrical appliances - Safety Part
2-6:Particular requirements for stationary cooking
ranges, hobs, ovens and similar appliances
Data Limite: 2013-04-26
TC 61
IEC 60335-2-32:2002 /CDV A2
Household and similar electrical appliances - Safety Part
2-32:Particular requirements for massage appliances
Data Limite: 2013-04-26
TC 61
IEC 60335-2-84:2002 /CDV A2
Household and similar electrical appliances - Safety Part
2-84:Particular requirements for toilets
Data Limite: 2013-04-26
TC 61
IEC 60335-2-105:2004 /CDV A2
Household and similar electrical appliances - Safety Part
2-105:Particular requirements for multifunctional shower
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
cabinets
Data Limite: 2013-04-26
TC 61
IEC 60335-2-109:2010 /CDV A1:2013
Household and similar electrical appliances - Safety Part
2-109:Particular requirements for UV radiation water
treatment appliances
Data Limite: 2013-04-26
TC 64
IEC 60364-4-44:2007 /CDV A1:2013
Low-voltage electrical installations Part 4-44:Protection
for safety - Protection against voltage disturbances and
electromagnetic disturbances Clause 443 - Protection
against overvoltages of atmospheric origin or due to
switching
Data Limite: 2013-04-05
TC 64
IEC 60364-5-53:2001 /CDV A2:2013
Electrical installations of buildings Part 5-53:Selection
and erection of electrical equipment - isolation,
switching and control Clause 534 - devices for protection
against overvoltages
Data Limite: 2013-04-05
TC 72
CDV 60730-2-22:2012
Automatic Electrical Controls for Household and Similar
Use Part 2-22: Particular requirements for thermal motor
protectors
Data Limite: 2013-03-01
TC 76
CDV 60825-1:2013
Safety of laser products Part 1: Equipment classification
and requirements
Data Limite: 2013-04-12
TC 78
FDIS 61472:2013
Live working - Minimum approach distances for ac
systems in the voltage range 72,5 kV to 800 kV - A
method of calculation
Data Limite: 2013-03-15
TC 79
FDIS 60839-11-1:2013
Alarm and electronic security systems Part
11-1:Electronic access control systems - System and
components requirements
Data Limite: 2013-03-29
TC 79
CDV 62676-4:2012
Video surveillance systems for use in security
applications Part 4: Application guidelines
Data Limite: 2013-03-01
TC 79
CDV 62851-1:2013
Alarm and electronic security systems - Social alarm
systems Part 1:System requirements
Data Limite: 2013-04-19
TC 79
CDV 62851-2:2013
Alarm and electronic security systems - Social alarm
systems Part 2:Trigger devices
Data Limite: 2013-04-19
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 99 15 março 2013

DOCUMENTOS
normativos
TC 79
CDV 62851-3:2013
Alarm and electronic security systems - Social alarm
systems Part 3:Local unit and controller
Data Limite: 2013-04-19
TC 79
CDV 62851-5:2013
Alarm and electronic security systems - Social alarm
systems Part 5:Interconnections and communications
Data Limite: 2013-04-19
TC 80
FDIS 61996-1:2013
Maritime navigation and radiocommunication equipment
and systems - Shipborne voyage data recorder (VDR) Part
1:Voyage data recorder (VDR) - Performance requirements,
methods of testing and required test results
Data Limite: 2013-04-19
TC 80
CDV 62065:2012
Maritime navigation and radiocommunication equipment
and systems - Track control systems - Operational and
performance requirements, methods of testing and required
test results
Data Limite: 2013-03-08
TC 80
IEC 62287-1:2010 /CDV A1:2012
Maritime navigation and radiocommunication equipment
and systems - Class B shipborne equipment of the
automatic identification system (AIS) Part 1:
Carrier-sense time division multiple access (CSTDMA)
techniques
Data Limite: 2013-03-01
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
Data Limite: 2013-05-24
TC 89
FDIS 60695-2-10:2013
Fire hazard testing Part 2-10: Glowing/hot-wire based
test methods - Glow-wire apparatus and common test
procedure
Data Limite: 2013-03-15
TC 89
FDIS 60695-9-1:2013
Fire hazard testing Part 9-1:Surface spread of flame -
General guidance
Data Limite: 2013-04-05
TC 89
FDIS 60695-11-10:2013
Fire hazard testing Part 11-10:Test flames - 50 W
horizontal and vertical flame test methods
Data Limite: 2013-04-19
TC 90
FDIS 61788-5:2013
Superconductivity Part 5:Matrix to superconductor
volume ratio measurement - Copper to superconductor
volume ratio of Cu/Nb-Ti composite superconducting
wires
Data Limite: 2013-05-10
TC 91
FDIS 61189-11:2013
Test methods for electrical materials, printed boards and
other interconnection structures and assemblies Part
11:Measurement of melting temperature or melting
temperature ranges of solder alloys
Data Limite: 2013-04-12
TC 82
CDV 62817:2013
Solar trackers for photovoltaic systems - Design
qualification
Data Limite: 2013-05-24
TC 85
FDIS 61557-14:2013
Electrical safety in low voltage distribution systems up
to 1000V a.c and 1500V d.c - Equipment for testing,
measuring or monitoring of protective measures Part 14:
Equipment for testing the safety of electrical equipment
for machinery
Data Limite: 2013-03-15
TC 85
FDIS 62638:2013
Recurrent test and test after repair of electrical equipment
Data Limite: 2013-05-10
TC 87
IEC 62127-3:2007 /FDIS A1:2013
Ultrasonics - Hydrophones Part 3:Properties of
hydrophones for ultrasonic fields up to 40 MHz
Data Limite: 2013-05-03
TC 88
CDV 62699:2013
Mapping rules and exchange methods for heterogeneous
parts libraries
Data Limite: 2013-05-10
TC 89
CDV 60695-1-11:2013
Fire hazard testing Part 1-11:Guidance for assessing the
fire hazard of electrotechnical products - Fire hazard
assessment
TC 91
FDIS 61191-1:2013
Printed board assemblies Part 1:Generic specification -
Requirements for soldered electrical and electronic
assemblies using surface mount and related assembly
technologies
Data Limite: 2013-04-26
TC 91
CDV 62588:2013
Marking and labeling of components, PCBs and PCBAs to
identify lead (Pb), lead-free (Pb-Free) and other
attributes
Data Limite: 2013-04-19
TC 94
FDIS 62246-1-1:2013
Reed switches Part 1-1:Generic specification - Quality
assessment
Data Limite: 2013-04-26
TC 95
FDIS 60255-26:2013
Measuring relays and protection equipment Part 26:
Electromagnetic compatibility requirements
Data Limite: 2013-04-26
TC 95
FDIS 60255-24:2012
Measuring relays and protection equipment Part
24:Common format for transient data exchange
(COMTRADE) for power systems
Data Limite: 2013-03-29
TC 100
FDIS 61938:2013
Multimedia systems - Guide to the recommended
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 100 15 março 2013

DOCUMENTOS
normativos
characteristics of analogue interfaces to achieve
interoperability
Data Limite: 2013-05-03
TC 100
CDV 62379-5-1:2013
Common control interface for networked digital audio
and video products Part 5-1:Transmission over networks
- General (TA 4)
Data Limite: 2013-06-07
TC 101
CDV 61340-4-6:2013
Electrostatics Part 4-6:Standard test methods for specific
applications - Wrist straps
Data Limite: 2013-04-26
TC 104
FDIS 60068-2-57:2013
Environmental testing Part 2-57:Test - Test Ff:
Vibration - Time-history and sine-beat method
Data Limite: 2013-03-29
TC 107
CDV 62396-3:2012
Process management for avionics - Atmospheric radiation
effects Part 3: Optimising system design to accommodate
the single event effects (SEE) of atmospheric radiation
Data Limite: 2013-03-01
TC 107
CDV 62396-4:2012
Process management for avionics - Atmospheric radiation
effects Part 4: Guidelines for designing with high voltage
aircraft electronics and potential single event effects
Data Limite: 2013-03-01
TC 108
IEC 60950-1:2005 /FDIS A2:2013
Information technology equipment - Safety Part
1:General requirements
Data Limite: 2013-03-22
TC 108
CDV 62368-1:2012
Audio/video, information and communication technology
equipment Part 1: Safety requirements
Data Limite: 2013-03-01
TC 108
CDV 62368-1:2012
Audio/video, information and communication technology
equipment Part 1: Safety requirements
Data Limite: 2013-03-01
TC 110
CDV 62629-12-1:2013
3D display devices Part 12-1:Measuring methods for
stereoscopic displays using glasses - Optical
Data Limite: 2013-05-17
TC 110
CDV 62715-1-1:2013
Flexible display devices Part 1-1:Terminology and letter
symbols
Data Limite: 2013-06-14
TC 111
FDIS 62321-1:2013
Determination of certain substances in electrotechnical
products Part 1:Introduction and overview
Data Limite: 2013-04-26
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
TC 111
FDIS 62321-2:2013
Determination of certain substances in electrotechnical
products Part 2:Disassembly, disjointment and
mechanical sample preparation
Data Limite: 2013-05-03
TC 111
FDIS 62321-3-1:2013
Determination of certain substances in electrotechnical
products Part 3-1:Screening test methods - Screening of
electrotechnical products for lead, mercury, cadmium,
total chromium and total bromine using X-ray
fluorescence spectrometry
Data Limite: 2013-05-03
TC 111
FDIS 62321-3-2:2013
Determination of certain substances in electrotechnical
products Part 3-2:Screening test methods - Screening of
total bromine in polymers and electronics by combustion
- Ion chromatography (C-IC)
Data Limite: 2013-05-03
TC 111
FDIS 62321-4:2013
Determination of certain substances in
electrotechnical products Part 4:Determination of
mercury in polymers, metals and electronics by
CV-AAS, CV-AFS, ICP-OES and ICP-MS
Data Limite: 2013-05-03
TC 111
FDIS 62321-5:2013
Determination of certain substances in
electrotechnical products Part 5:Determination of
cadmium, lead, and chromium in polymers and
electronics and cadmium and lead in metals by AAS,
AFS, ICP-OES and ICP-MS
Data Limite: 2013-05-03
TC 111
FDIS 62542:2013
Environmental standardization for electrical and
electronic products and systems - Standardization of
environmental aspects - Glossary of terms
Data Limite: 2013-05-03
TC 112
FDIS 60243-1:2013
Electrical strength of insulating materials - Test methods
Part 1: Tests at power frequencies
Data Limite: 2013-03-15
TC 113
FDIS 62860:2013
IEEE Standard for Test Methods for the Characterization
of Organic Transistors and Materials (IEEE Std 1620)
Data Limite: 2013-05-10
TC 113
FDIS 62866:2013
IEEE Standard for Test Methods for the Characterization
of Organic Transistor-Based Ring Oscillators (IEEE Std
1620.1)
Data Limite: 2013-05-10
TC 116
CDV 62841-2-5:2013
Electric Motor-Operated Hand-Held Tools, Transportable
Tools and Lawn and Garden Machinery - Safety Part 2-5:
Particular requirements for hand-held circular saws
Data Limite: 2013-04-26
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 101 15 março 2013

Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
11. Projetos de normas da Organização Internacional de Normalização
(ISO)/Comissão Eletrotécnica Internacional (IEC)
Os projetos de norma estão organizados por “Comité Técnico conjunto” ISO/IEC.
11.1 Projetos em inquérito público
Para cada referência menciona-se a designação codificada, o título e a data limite para a
apresentação de comentários.
ISO/IEC SC 62A
DIS 17791:2013
Health informatics - Guidance on Standards for Enabling
Safety in Health Software
Data Limite: 2013-04-05
ISO/IEC TC CABPUB
DIS 17023:2013
Conformity assessment - Guidelines for determining
duration of management system certification audits
Data Limite: 2013-04-19
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 102 15 março 2013

Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
12. Edição e anulação de outros Documentos Normativos
12.1 Documentos Normativos editados
Para cada referência, menciona-se a designação codificada (prefixos DNP TS, DNP TR, DNP Guia,
DNP CEN/TS, DNP CEN/TS, DNP CEN Guia, DNP CEN/CLC Guia, DNP CLC/TS, DNP CLC/TR, DNP CLC
Guia, DNP CEN/CLC, DNP ENV, DNP CWA, DNP ISO/TS, DNP ISO/TR, DNP ISO Guia, DNP ISO/IEC Guia,
DNP IEC/TS, DNP IEC/TR, DNP ISO/PAS, DNP IWA e DNP IEC/PAS, número, parte e data), o preço, o título
e a correspondência a documentos europeus e/ou internacionais, quando existam, o número do
Termo de Aprovação e a respetiva data.
Os Documentos Normativos referenciados entram em vigor no dia seguinte ao da edição desta Lista
Mensal.
LISTA VAZIA
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 103 15 março 2013