Download sample of resource - vetres

MEM05 Metal and Engineering
Training Package
Student Name:
Student No:
MEM20205
Certificate II in Engineering
– Production Technology
RPL /Credit Forms
Recognition Application
SAMPLE
Version 1.0
TRAINING AND EDUCATION SUPPORT
INDUSTRY SKILLS UNIT
MEADOWBANK
Product Code: 5478

Page 2 of 302
SAMPLE

MEM30305 Certificate III in Engineering – Fabrication Trade Recognition/Credit Tool v1
SAMPLE
Page 3 of 302

MEM20205 Certificate II in Engineering- Production Technology Recognition Application v1
Acknowledgments
TAFE NSW Training and Education Support Industry Skills Unit, Meadowbank would like
to acknowledge the support and assistance of the following people in the production of
the TAFE NSW MEM20205 Certificate II in Engineering – Production Technology
Recognition/Credit Tool.
Writer
Chris Zvirblis
Reviewer
Jim Miles
Project Manager
Stephen Davies
Education Program Manager
TAFE NSW Training and Education Support
Industry Skills Unit, Meadowbank
Further acknowledgements
The following materials have been used as research for this resource:
Enquiries
MEM05 Metal and Engineering Training Package
TLI10 Transport and Logistics v1.1 Training Package
CPC08 Construction, Plumbing and Services v6 Training Package
PMB07 Plastics, Rubber and Cablemaking Training Package
MSA Website www.mskills.com.au
TAFENSW Corporate Systems
http://training.gov.au
SAMPLE
Enquiries about this and other publications can be made to:
TAFE NSW Training and Education Support, Industry Skills Unit, Meadowbank
Locked Bag No. 6, MEADOWBANK, NSW 2114
Phone: (02) 9942 3200 Fax: (02) 9942 3257
© The State of New South Wales, Department of Education and Training,
TAFE NSW, Training and Education Support, Industry Skills Unit,
Meadowbank.
Copyright of this material is reserved to TAFE NSW, Training and Education Support,
Industry Skills Unit, Meadowbank. Reproduction or transmittal in whole or in part,
other than for the purposes of private study or research, and subject to the provisions
of the Copyright Act, is prohibited without the written authority of TAFE NSW, Training
and Education Support, Industry Skills Unit, Meadowbank.
ISBN-978-1-74236-246-5
Page 4 of 302

MEM20205 Certificate II in Engineering- Production Technology Recognition Application v1
Table of Contents
Instructions on how to use this RPL/Credit resource………..……………………………………………………………10
Important note on prerequisite units……………………………………….……………………………………………………11
SECTION 1: RECOGNITION/CREDIT GUIDES .................................... 13
Core Units ................................................................................................... 13
MEM12023A Perform engineering measurements ....................................................... 13
MEM13014A Apply principles of occupational health and safety in the work environment . 15
MEM14004A Plan to undertake a routine task ............................................................ 16
MEM15002A Apply quality systems ........................................................................... 17
MEM15024A Apply quality procedures ....................................................................... 18
MEM16006A Organise and communicate information .................................................. 19
MEM16007A Work with others in a manufacturing, engineering or related environment ... 20
MEM17003A Assist in the provision of on the job training ............................................ 21
MSAENV272B Participate in environmentally sustainable work practices .......................... 22
Competency Field 03: Assembly ................................................................ 23
MEM03001B Perform manual production assembly ..................................................... 23
MEM03002B Perform precision assembly ................................................................... 24
MEM03003B Perform sheet and plate assembly .......................................................... 26
MEM03004B Perform electronic/electrical assembly (production) .................................. 27
MEM03005B Rework and repair (electrical/electronic production) ................................. 28
MEM03006B Set assembly stations ........................................................................... 29
Competency Field 04: Casting and Moulding ............................................. 30
MEM04001B Operate melting furnaces ...................................................................... 30
MEM04002B Perform gravity die casting .................................................................... 31
MEM04003B Operate pressure die casting machine ..................................................... 32
MEM04004B Prepare and mix sand for metal moulding ............................................... 33
MEM04006B Operate sand moulding and core making machines .................................. 34
MEM04007B Pour molten metal ................................................................................ 35
MEM04008B Fettle and trim metal castings/forgings ................................................... 36
MEM04018B Perform general woodworking machine operations ................................... 37
MEM04019B Perform refractory installation and repair ................................................ 38
Competency Field 05: Fabrication ............................................................. 39
MEM05001B Perform manual soldering/desoldering - electrical/electronic components .... 39
MEM05002B Perform high reliability soldering and desoldering ..................................... 40
MEM05003B Perform soft soldering ........................................................................... 41
MEM05004C Perform routine oxy acetylene welding ................................................... 42
MEM05005B Carry out mechanical cutting ................................................................. 43
MEM05006B Perform brazing and/or silver soldering ................................................... 44
MEM05007C Perform manual heating and thermal cutting .......................................... 45
MEM05009C Perform automated thermal cutting ....................................................... 46
MEM05012C Perform routine manual metal arc welding .............................................. 47
MEM05013C Perform manual production welding ....................................................... 48
MEM05014C Monitor quality of production welding/fabrications ................................... 49
MEM05015D Weld using manual metal arc welding process .......................................... 50
MEM05017D Weld using gas metal arc welding process ............................................... 52
MEM05019D Weld using gas tungsten arc welding process ........................................... 54
MEM05023C Weld using submerged arc welding process ............................................ 56
MEM05041B Weld using powder flame spraying ......................................................... 57
MEM05049B Perform routine gas tungsten arc welding ................................................ 58
MEM05050B Perform routine gas metal arc welding .................................................... 59
MEM05051A Select welding processes ....................................................................... 60
MEM05052A Apply safe welding practices .................................................................. 61
MEM05053A Set and edit computer controlled thermal cutting machines ....................... 62
SAMPLE
Page 5 of 302

MEM20205 Certificate II in Engineering- Production Technology Recognition Application v1
Competency Field 06: Forging ................................................................... 63
MEM06001B Perform hand forging ............................................................................ 63
MEM06002B Perform hammer forging ....................................................................... 64
MEM06003C Carry out heat treatment ...................................................................... 65
MEM06004B Select heat treatment processes and test finished product ........................ 66
MEM06005B Perform drop and upset forging .............................................................. 67
MEM06006C Repair springs ...................................................................................... 68
MEM06007B Perform basic incidental heat/quenching, tempering and annealing ............ 69
MEM06008A Hammer forge complex shapes .............................................................. 70
MEM06009A Hand forge complex shapes ................................................................... 71
Competency Field 07: Machine & process operations ................................ 72
MEM07001B Perform operational maintenance of machines/equipment ......................... 72
MEM07003B Perform machine setting (routine) .......................................................... 73
MEM07004B Perform machine setting (complex) ........................................................ 74
MEM07005C Perform general machining .................................................................... 75
MEM07014B Perform electro-discharge (EDM) machining operations ............................. 76
MEM07015B Set computer controlled machines/processes ........................................... 77
MEM07016C Set and edit computer controlled machines/processes .............................. 78
MEM07024B Operate and monitor machine/process .................................................... 79
MEM07025B Perform advanced machine/process operation ........................................ 80
MEM07026B Perform advanced plastic processing ...................................................... 81
MEM07027B Perform advanced press operations ........................................................ 82
MEM07028B Operate computer controlled machines/processes .................................... 83
MEM07029B Perform routine sharpening/maintenance of production tools and cutters .... 84
MEM07030C Perform metal spinning lathe operations (basic) ....................................... 85
MEM07031C Perform metal spinning lathe operations (complex) .................................. 86
MEM07032B Use workshop machines for basic operations ........................................... 87
MEM07033B Operate and monitor basic boiler ............................................................ 89
MEM07034B Operate and monitor intermediate class boiler ......................................... 90
MEM07040A Set multistage integrated processes ....................................................... 91
Competency Field 08: Surface Finishing .................................................... 92
MEM08001B Perform wire, jig and barrel load/unload work .......................................... 92
MEM08002C Pre-treat work for subsequent surface coating ......................................... 93
MEM08003C Perform electroplating operations .......................................................... 94
MEM08004B Finish work using wet, dry and vapour deposition methods ........................ 95
MEM08005B Prepare and produce specialised coatings ................................................ 96
MEM08006B Produce clear and/or coloured and/or sealed anodised films on aluminium .. 97
MEM08007B Control surface finish production and finished product quality .................... 98
MEM08008B Operate and control surface finishing waste treatment process .................. 99
MEM08009C Make up solutions .............................................................................. 100
MEM08010B Manually finish/polish materials ........................................................... 101
MEM08011B Prepare surfaces using solvents and/or mechanical means ...................... 102
MEM08012B Prepare surfaces by abrasive blasting (basic)......................................... 103
MEM08013B Prepare surfaces by abrasive blasting (advanced) .................................. 104
MEM08014B Apply protective coatings (basic).......................................................... 105
MEM08015B Apply protective coatings (advanced).................................................... 106
MEM08016B Control blast coating by-products, materials and emissions ..................... 107
MEM08018B Electroplate engineering coatings ......................................................... 108
MEM08019B Electroplate protective finishes ............................................................. 109
MEM08020B Electroplate decorative finishes ............................................................ 110
SAMPLE
Competency Field 09: Drawing, drafting and design ............................... 111
MEM09002B Interpret technical drawing .................................................................. 111
Competency field 10: Installation & commissioning ................................ 112
MEM10002B Terminate and connect electrical wiring ................................................. 112
MEM10009B
MEM10010B
Install refrigeration and air conditioning plant and equipment .................. 113
Install pipework and pipework assemblies ............................................. 114
Page 6 of 302

MEM20205 Certificate II in Engineering- Production Technology Recognition Application v1
MEM10011B Terminate and connect specialist cables ................................................ 115
MEM10013A Install split air conditioning systems and associated pipework .................. 116
Competency field 11: Materials handling ................................................. 117
MEM11001C Erect/dismantle scaffolding and equipment ............................................ 117
MEM11002C Erect/dismantle complex scaffolding and equipment ............................... 118
MEM11003B Coordinate erection/dismantling of complex scaffolding/equipment .......... 119
MEM11004B Undertake dogging ............................................................................. 120
MEM11005B Pick and process order ........................................................................ 121
MEM11006B Perform production packaging .............................................................. 122
MEM11007B Administer inventory procedures .......................................................... 123
MEM11008B Package materials (stores and warehouse) ............................................ 124
MEM11009B Handle/move bulk fluids/gases ............................................................ 125
MEM11010B Operate mobile load shifting equipment ................................................ 126
MEM11011B Undertake manual handling ................................................................. 127
MEM11012B Purchase materials ............................................................................. 128
MEM11013B Undertake warehouse receival process .................................................. 129
MEM11014B Undertake warehouse dispatch process ................................................. 130
MEM11015B Manage warehouse inventory system .................................................... 131
MEM11016B Order materials .................................................................................. 132
MEM11017B Organise and lead stocktakes .............................................................. 133
MEM11018B Organise and maintain warehouse stock receival and/or dispatch system .. 134
MEM11019B Undertake tool store procedures .......................................................... 135
MEM11020B Perform advanced warehouse computer operations ................................ 136
MEM11021B Perform advanced operation of load shifting equipment .......................... 137
MEM11022B Operate fixed/moveable load shifting equipment .................................... 138
MEM11023A Operate a bridge and gantry crane ....................................................... 139
MEM11024A Undertake basic rigging ...................................................................... 140
MEM11025A Operate a non-slewing mobile crane of greater than three tonnes capacity 141
Competency Field 12: Measurement ........................................................ 142
MEM12001B Use comparison and basic measuring devices ........................................ 142
MEM12002B Perform electrical/electronic measurement ............................................ 143
MEM12019B Measure components using coordinate measuring machines .................... 144
MEM12020B Set and operate coordinate measuring machines .................................... 145
MEM12024A Perform computations ......................................................................... 146
Competency Field 13: Occupational Health & Safety ............................... 147
MEM13001B Perform emergency first aid ................................................................ 147
MEM13002B Undertake occupational health and safety activities in the workplace ........ 149
MEM13003B Work safely with industrial chemicals and materials ................................ 150
MEM13004B Work safely with molten metals/glass ................................................... 151
MEM13007B Maintain water treatment systems for cooling towers .............................. 152
MEM13013B Work safely with ionizing radiation ....................................................... 153
Competency Field 14: Planning ............................................................... 154
MEM14005A Plan a complete activity ...................................................................... 154
Competency field 15: Quality .................................................................. 156
MEM15001B Perform basic statistical quality control ................................................. 156
MEM15003B Use improvement processes in team activities ....................................... 157
MEM15004B Perform inspection ............................................................................. 158
Competency field 16: Communication ..................................................... 159
MEM16002C Conduct formal interviews and negotiations ........................................... 159
MEM16004B Perform internal/external customer service ........................................... 160
MEM16005A
SAMPLE
Operate as a team member to conduct manufacturing, engineering or
related activities ................................................................................ 161
MEM16008A Interact with computing technology ...................................................... 162
MEM16013A Operate in a self-directed team ............................................................ 163
Page 7 of 302

MEM20205 Certificate II in Engineering- Production Technology Recognition Application v1
Competency Field 17: Training ................................................................ 164
MEM17001B Assist in development and deliver training in the workplace ..................... 164
MEM17002B Conduct workplace assessment ............................................................ 166
Competency Field 18: Maintenance and diagnostics ................................ 167
MEM18001C Use hand tools ................................................................................... 167
MEM18002B Use power tools/hand held operations................................................... 168
MEM18003C Use tools for precision work ................................................................. 169
MEM18013B Perform gland packing ........................................................................ 171
MEM18024B Maintain engine cooling systems .......................................................... 172
MEM18025B Service combustion engines................................................................. 173
MEM18026C Test compression ignition fuel systems ................................................. 174
MEM18027C Overhaul engine fuel system components .............................................. 175
MEM18028B Maintain engine lubrication systems ..................................................... 176
MEM18029B Tune diesel engines ............................................................................ 177
MEM18030B Diagnose and rectify low voltage electrical systems ................................ 178
MEM18031B Diagnose and rectify low voltage starting systems .................................. 179
MEM18032B Maintain induction/exhaust systems ..................................................... 180
MEM18033B Perform engine bottom-end overhaul .................................................... 181
MEM18035B Diagnose and rectify braking systems ................................................... 182
MEM18037B Diagnose and rectify low voltage charging systems................................. 183
MEM18038B Maintain wheels and tyres ................................................................... 184
MEM18039B Diagnose and rectify track type undercarriage ....................................... 185
MEM18040B Maintain suspension systems ............................................................... 186
MEM18041B Maintain steering systems ................................................................... 187
MEM18042C Diagnose and rectify manual transmissions ........................................... 188
MEM18043C Diagnose and rectify automatic transmissions ........................................ 189
MEM18044C Diagnose and rectify drive line and final drives ....................................... 190
MEM18055B Dismantle, replace and assemble engineering components ...................... 191
MEM18063B Terminate signal and data cables ......................................................... 192
MEM18071B Connect/disconnect fluid conveying system components ......................... 193
MEM18072B Manufacture fluid conveying conductor assemblies ................................. 194
MEM18084A Commission and decommission split air conditioning systems .................. 195
MEM18085A Install, service and repair domestic air conditioning and refrigeration
appliances ......................................................................................... 196
MEM18086B Test, recover, evacuate and charge refrigeration systems ....................... 197
MEM18098A Prepare to perform work associated with fuel system installation and
servicing ........................................................................................... 198
SAMPLE
Competency field 19: Jewellery and horological ...................................... 199
MEM19001B Perform jewellery metal casting ........................................................... 199
MEM19002B Prepare jewellery illustrations .............................................................. 200
MEM19003B Handle gem materials ......................................................................... 201
MEM19004B Handle and examine gemstone materials .............................................. 203
MEM19005B Produce three-dimensional precision items ............................................ 204
MEM19006B Replace watch batteries ...................................................................... 205
MEM19007B Perform gemstone setting ................................................................... 206
MEM19008B Prepare jewellery designs .................................................................... 207
MEM19009B Perform investment procedures for lost wax casting process .................... 208
MEM19010B Produce rubber moulds for lost wax casting process ............................... 209
MEM19011B Perform wax injection of moulds for lost wax casting process ................... 210
MEM19012B Produce jewellery wax model ............................................................... 212
MEM19013B Produce jewellery metal masters .......................................................... 213
MEM19014B Perform hand engraving ...................................................................... 214
MEM19015B Perform jewellery enamelling ............................................................... 215
MEM19016B Construct jewellery components ........................................................... 216
MEM19017B Fabricate jewellery items ..................................................................... 217
MEM19018B Repair jewellery items ........................................................................ 218
MEM19020B Fault-find and maintain micro-mechanisms............................................ 219
MEM19021B Diagnose and service micro-mechanisms .............................................. 220
Page 8 of 302

MEM20205 Certificate II in Engineering- Production Technology Recognition Application v1
Competency field 20: Locksmithing ......................................................... 222
MEM20001A Produce keys ..................................................................................... 222
MEM20002A Assemble and test lock mechanisms ..................................................... 223
MEM20003A Install and upgrade locks and hardware ................................................ 225
MEM20004A Gain entry ......................................................................................... 226
MEM20006A Maintain and service mechanical locking devices .................................... 228
MEM20014A Perform a site security survey .............................................................. 229
Competency Field 21: Horology ............................................................... 230
MEM21001A Replace watch batteries, capacitors and bands ....................................... 230
MEM21002A Perform watch movement exchange ..................................................... 231
MEM21003A Perform watch case servicing, repair and refurbishment .......................... 233
MEM21004A Clean watch and clock components ....................................................... 234
MEM21005A Diagnose faults in quartz watches ........................................................ 235
MEM21006A Service quartz watches ....................................................................... 236
MEM21007A Service complex quartz watches........................................................... 237
MEM21008A Service mechanical watches ................................................................ 238
Competency field 24: Non-destructive testing ......................................... 239
MEM24001B Perform basic penetrant testing ........................................................... 239
MEM24003B Perform basic magnetic particle testing ................................................. 240
Competency field 25: Marine craft construction ...................................... 241
MEM25001B Apply fibre-reinforced materials ........................................................... 241
MEM25002B Form and integrate fibre-reinforced structures ....................................... 242
MEM25004B Fair and shape surfaces ...................................................................... 243
MEM25006B Undertake marine sheathing operations ................................................ 244
MEM25007B Maintain marine vessel surfaces ........................................................... 245
MEM25011B Install marine systems ........................................................................ 246
MEM25012B Install and test operations of marine auxiliary systems ........................... 248
MEM25014B Perform marine slipping operations ...................................................... 249
MEM25015A Assemble and install equipment and accessories/ancillaries ..................... 250
Competency field 50: Boating services .................................................... 251
MEM50002B Work safely on marine craft ................................................................. 251
MEM50003B Follow work procedures to maintain the marine environment ................... 252
MEM50004B Maintain quality of environment by following marina codes ...................... 254
MEM50009B Safely operate a mechanically powered recreational boat ........................ 255
Imported Units ........................................................................................ 256
CPCCLDG3001A Licence to perform dogging ................................................................. 256
CPCCLRG3001A Licence to perform rigging basic level ................................................... 258
CPCCLSF2001A Licence to erect, alter and dismantle scaffolding basic level ..................... 259
CPCCLSF3001A Licence to erect, alter and dismantle scaffolding intermediate level .......... 260
TLILIC0012A Licence to operate a vehicle loading crane (capacity 10 metre tonnes and
above) .............................................................................................. 261
TLILIC2001A Licence to operate a forklift truck ......................................................... 263
TLILIC2002A Licence to operate an order picking forklift truck .................................... 265
TLILIC3003A Licence to operate a bridge and gantry crane ......................................... 267
TLILIC3006A
SAMPLE
Licence to operate a non-slewing mobile crane (greater than three tonnes
capacity) ........................................................................................... 269
PMBPROD291B Operate resin infusion moulding equipment ........................................... 271
PMBPROD294B Operate resin transfer moulding equipment ........................................... 272
PMBPROD298B Operate equipment using pre-preg material ........................................... 273
PMBPROD391B Produce composites using resin infusion ................................................ 274
PMBPROD394B Produce composites using resin transfer moulding .................................. 275
PMBPROD398B Produce composites using pre-pregs ..................................................... 276
Blank Template for Elective Choices (other Training Packages / imported units) . 277
Page 9 of 302

MEM20205 Certificate II in Engineering- Production Technology Recognition Application v1
SECTION 2: TEMPLATES AND REPORTS .......................................... 281
Attachment 1: Resumé of employment, education and life experiences .......................... 281
Attachment 2: Portfolio of supporting evidence ........................................................... 283
Attachment 3: Supervisor’s report ............................................................................. 284
Attachment 4: Third party report ............................................................................... 286
Attachment 5: Candidate recognition/credit skills gap training plan ............................... 289
Appendix A………………………………………………………………………………………..251
SAMPLE
Page 10 of 302

MEM20205 Certificate II in Engineering- Production Technology Recognition Application v1
INSTRUCTIONS ON HOW TO USE THIS RPL/CREDIT RESOURCE
You have chosen to seek recognition/credit for competency units from MEM20205
Certificate II in Engineering-Production Technology, TAFE NSW course number 9035.
Simply follow the steps listed below when submitting your application.
Step 1
Step 2
Carefully read the requirements of the qualification (MEM20205) as specified in
the MEM05, Metal and Engineering Training Package. See Appendix A.
Ensure you have a valid enrolment in the qualification you are seeking
recognition / credit for.
Step 3
Step 4
Step 5
Discuss your recognition proposal / application with the training provider or
relevant teaching section and follow the processes and time frames they have
indicated.
Select the competency unit or units you are seeking recognition/credit for, see
Section 1: Recognition/Credit Guides for details of units and elements.
If possible, provide approximately 3 forms of evidence, to enable the
assessor(s) to make a sound judgement against the unit(s) you are seeking
recognition for. See Section 1: Suggested supporting evidence columns in
each of the Recognition Guides for examples of evidence required.
Step 6 Document your claim for a given unit(s) on the forms provided, see Section 2:
Templates and Reports and populate attachments 1 to 5 with relevant
evidence to support your claim.
You may complete the forms you need on a computer, then:
o print them
o sign/initial and date each page, where required
SAMPLE
o collate them, with the cover page
o present them to your assessor for processing
To help with formatting, the number of characters on each line has been
limited. Because it is impossible to predict exactly what space your entries
will need, you may find occasionally that you need to use abbreviations to fit
your entries into the space allocated. Otherwise you may introduce extra lines
of text that will upset the pagination of this document
Where provision has been made for more than one line of text to go in, you
will need to click on, or tab down to, a new line before you can use it.
Step 7
Submit your application to the Training provider (teaching section). This can be
done by printing the relevant forms contained in this resource as indicated
above. You may also choose to give the Training Provider an electronic copy of
your application.
Page 11 of 302

MEM20205 Certificate II in Engineering- Production Technology Recognition Application v1
Step 8
Wait for a response from your assessors.
Important note on prerequisite units
A vital step in the recognition process is to find out if the unit or units you are
seeking recognition against require any prerequisite units to support them. If the
competency unit has a prerequisite unit or units you must provide sufficient
evidence (knowledge and skills) to support your claim before the recognition process
can proceed further.
For complete details of individual units go to the following link http://training.gov.au or
for specific MEM05 units go to: http://training.gov.au/Training/Details/MEM05
The above links will provide you with a specific range of knowledge and skills
expected of the unit(s) along with any pre-requisite and/or co-requisites for a given
unit. If you are uncertain of specific details relating to a given unit(s) contact your
local TAFE teaching campus for further information.
SAMPLE
Page 12 of 302

MEM20205 Certificate II in Engineering- Production Technology Recognition Application v1
Section 1:
Recognition/Credit Guides
Core Units
MEM12023A
Unit description:
Perform engineering measurements
This unit covers performing measurement skills requiring straightforward use of mechanical measuring devices and
associated calculations.
For the required knowledge and skills for this unit go to http://training.gov.au/Training/Details/MEM12023A
Critical aspects of assessment
Refer also to elements, performance
criteria and essential skills and knowledge
1. Select appropriate device or
equipment.
2. Obtain measurements using a range of
measuring devices.
3. Maintain measuring devices.
4. Communicate measurements as
required.
Suggested supporting
evidence
Assessment tools
Performance appraisals
Position description
Referral evidence
Reports
Sample of work/project
Screening tools
Supervisor’s report
Third party reports
Training transcripts
Training transcripts
Workplace evidence
Assessor’s validation of
evidence
Interviewing
Questioning
Reports
Supervision reports
Skill demonstration
Third party reports
SAMPLE
Work based project
Workplace documents
Other (please specify)
Outcomes
Competent
Skills gap training
required
Further information
required
Assessor’s name:
Assessor’s initials:
_____________________
Date:
Page 13 of 302

MEM20205 Certificate II in Engineering – Production Technology Recognition Application v1
_____________________
SAMPLE
Page 14 of 302

MEM20205 Certificate II in Engineering – Production Technology Recognition Application v1
MEM13014A
Apply principles of occupational health and safety in the work environment
Unit description:
This unit covers following occupational health and safety procedures in an engineering or similar work environment.
For the required knowledge and skills for this unit go to http://training.gov.au/Training/Details/MEM13014A
Critical aspects of assessment
Refer also to elements, performance
criteria and essential skills and knowledge
1. Follow safe work practices.
2. Report workplace hazards and
accidents
3. Follow emergency procedures
Suggested supporting
evidence
Assessment tools
Performance appraisals
Position description
Referral evidence
Reports
Sample of work/project
Screening tools
Supervisor’s report
Third party reports
Training programs
Training transcripts
Workplace evidence
Assessor’s validation of
evidence
Interviewing
Questioning
Reports
Supervision reports
Skill demonstration
Third party reports
Work based project
Workplace documents
SAMPLE
Other (please specify)
Outcomes
Competent
Skills gap training
required
Further information
required
Assessor’s name:
Assessor’s initials:
_____________________
Date:
_____________________
Page 15 of 302

MEM20205 Certificate II in Engineering – Production Technology Recognition Application v1
MEM14004A
Plan to undertake a routine task
Unit description:
This unit covers a person planning their own work where tasks involve one or more steps or functions and are
carried out routinely on a regular basis. It includes the concepts of following routine instructions, specifications and
requirements.
For the required knowledge and skills for this unit go to http://training.gov.au/Training/Details/MEM14004A
Critical aspects of assessment
Refer also to elements, performance
criteria and essential skills and knowledge
1. Identify task requirements.
2. Plan steps required to complete task.
3. Review plan
Suggested supporting
evidence
Assessment tools
Performance appraisals
Position description
Referral evidence
Reports
Sample of work/project
Screening tools
Supervisor’s report
Third party reports
Training programs
Training transcripts
Workplace evidence
Assessor’s validation of
evidence
Interviewing
Questioning
Reports
Supervision reports
Skill demonstration
Third party reports
Work based project
Workplace documents
SAMPLE
Other (please specify)
Outcomes
Competent
Skills gap training
required
Further information
required
Assessor’s name:
Assessor’s initials:
_____________________
Date:
_____________________
Page 16 of 302

MEM20205 Certificate II in Engineering – Production Technology Recognition Application v1
MEM15002A
Apply quality systems
Unit description:
This unit covers working within a quality improvement system, either individually or in a team situation.
For the required knowledge and skills for this unit go to http://training.gov.au/Training/Details/MEM15002A
Critical aspects of assessment
Refer also to elements, performance
criteria and essential skills and knowledge
1. Work within a quality system
2. Engage in quality improvement
Suggested supporting
evidence
Assessment tools
Performance appraisals
Position description
Referral evidence
Reports
Sample of work/project
Screening tools
Supervisor’s report
Third party reports
Training programs
Training transcripts
Workplace evidence
Assessor’s validation of
evidence
Interviewing
Questioning
Reports
Supervision reports
Skill demonstration
Third party reports
Work based project
Workplace documents
SAMPLE
Other (please specify)
Outcomes
Competent
Skills gap training
required
Further information
required
Assessor’s name:
Assessor’s initials:
_____________________
Date:
_____________________
Page 17 of 302

MEM20205 Certificate II in Engineering – Production Technology Recognition Application v1
MEM15024A
Apply quality procedures
Unit description:
This unit covers applying established quality procedures to an employee's own work within a manufacturing,
engineering or related environment.
For the required knowledge and skills for this unit go to http://training.gov.au/Training/Details/MEM15024A
Critical aspects of assessment
Refer also to elements, performance
criteria and essential skills and knowledge
1. Take responsibility for own quality
2. Apply standard procedures of
workplace quality to own job
Suggested supporting
evidence
Assessment tools
Performance appraisals
Position description
Referral evidence
Reports
Sample of work/project
Screening tools
Supervisor’s report
Third party reports
Training programs
Training transcripts
Workplace evidence
Assessor’s validation of
evidence
Interviewing
Questioning
Reports
Supervision reports
Skill demonstration
Third party reports
Work based project
Workplace documents
SAMPLE
Other (please specify)
Outcomes
Competent
Skills gap training
required
Further information
required
Assessor’s name:
Assessor’s initials:
_____________________
Date:
_____________________
Page 18 of 302

MEM20205 Certificate II in Engineering – Production Technology Recognition Application v1
MEM16006A
Organise and communicate information
Unit description:
This unit covers accessing, organising and communicating information related to processes or tasks.
For the required knowledge and skills for this unit go to http://training.gov.au/Training/Details/MEM16006A
Critical aspects of assessment
Refer also to elements, performance
criteria and essential skills and knowledge
1. Access information and/or records
2. Organise and analyse information
3. Communicate organised information
using established workplace methods
Suggested supporting
evidence
Assessment tools
Performance appraisals
Position description
Referral evidence
Reports
Sample of work/project
Screening tools
Supervisor’s report
Third party reports
Training programs
Training transcripts
Workplace evidence
Assessor’s validation of
evidence
Interviewing
Questioning
Reports
Supervision reports
Skill demonstration
Third party reports
Work based project
Workplace documents
SAMPLE
Other (please specify)
Outcomes
Competent
Skills gap training
required
Further information
required
Assessor’s name:
Assessor’s initials:
_____________________
Date:
_____________________
Page 19 of 302

MEM20205 Certificate II in Engineering – Production Technology Recognition Application v1
MEM16007A
Work with others in a manufacturing, engineering or related environment
Unit description:
This unit covers operating in an interactive work environment. It covers contribution to a group effort in order to
plan and carry out work. This work includes identification of work roles, communication and co-operation with
others.
For the required knowledge and skills for this unit go to http://training.gov.au/Training/Details/MEM16007A
Critical aspects of assessment
Refer also to elements, performance
criteria and essential skills and knowledge
1. Identify roles and responsibilities
2. Plan activities
3. Work with others
Suggested supporting
evidence
Assessment tools
Performance appraisals
Position description
Referral evidence
Reports
Sample of work/project
Screening tools
Supervisor’s report
Third party reports
Training programs
Training transcripts
Workplace evidence
Assessor’s validation of
evidence
Interviewing
Questioning
Reports
Supervision reports
Skill demonstration
Third party reports
Work based project
Workplace documents
SAMPLE
Other (please specify)
Outcomes
Competent
Skills gap training
required
Further information
required
Assessor’s name:
Assessor’s initials:
_____________________
Date:
_____________________
Page 20 of 302

MEM20205 Certificate II in Engineering – Production Technology Recognition Application v1
MEM17003A
Assist in the provision of on the job training
Unit description:
This unit covers assisting in the provision of on the job training to others while undertaking normal duties.
For the required knowledge and skills for this unit go to http://training.gov.au/Training/Details/MEM17003A
Critical aspects of assessment
Refer also to elements, performance
criteria and essential skills and knowledge
1. Determine role of on the job training
2. Provide on the job training
3. Report on trainee performance
Suggested supporting
evidence
Assessment tools
Performance appraisals
Position description
Referral evidence
Reports
Sample of work/project
Screening tools
Supervisor’s report
Third party reports
Training programs
Training transcripts
Workplace evidence
Assessor’s validation of
evidence
Interviewing
Questioning
Reports
Supervision reports
Skill demonstration
Third party reports
Work based project
Workplace documents
SAMPLE
Other (please specify)
Outcomes
Competent
Skills gap training
required
Further information
required
Assessor’s name:
Assessor’s initials:
_____________________
Date:
_____________________
Page 21 of 302

MEM20205 Certificate II in Engineering – Production Technology Recognition Application v1
MSAENV272B
Participate in environmentally sustainable work practices
Unit description:
This competency covers the outcomes required to effectively measure current resource use and carry out
improvements including those reducing negative environmental impacts of work practices.
For the required knowledge and skills for this unit go to http://training.gov.au/Training/Details/MSAENV272B
Critical aspects of assessment
Refer also to elements, performance
criteria and essential skills and knowledge
1. Identify current resource use and
environmental issues
2. Comply with environmental
regulations
3. Seek opportunities to improve
environmental practices and resource
efficiency
Suggested supporting
evidence
Assessment tools
Performance appraisals
Position description
Referral evidence
Reports
Sample of work/project
Screening tools
Supervisor’s report
Third party reports
Training programs
Training transcripts
Workplace evidence
Assessor’s validation of
evidence
Interviewing
Questioning
Reports
Supervision reports
Skill demonstration
Third party reports
Work based project
Workplace documents
SAMPLE
Other (please specify)
Outcomes
Competent
Skills gap training
required
Further information
required
Assessor’s name:
Assessor’s initials:
_____________________
Date:
_____________________
Page 22 of 302

MEM20205 Certificate II in Engineering – Production Technology Recognition Application v1
Competency Field 03: Assembly
MEM03001B
Perform manual production assembly
Unit description:
This unit covers assembling components and/or sub-assemblies in a production environment and testing the
components and/or sub-assemblies to ensure compliance with specifications.
For the required knowledge and skills for this unit go to http://training.gov.au/Training/Details/MEM03001B
Critical aspects of assessment
Refer also to elements, performance
criteria and essential skills and knowledge
1. Read and understand job sheets
2. Select assembly equipment and
components
3. Assemble components
4. Perform tests
5. Protect assembly from damage
Suggested supporting
evidence
Assessment tools
Performance appraisals
Position description
Referral evidence
Reports
Sample of work/project
Screening tools
Supervisor’s report
Third party reports
Training programs
Training transcripts
Workplace evidence
Assessor’s validation of
evidence
Interviewing
Questioning
Reports
Supervision reports
Skill demonstration
Third party reports
Work based project
SAMPLE
Workplace documents
Other (please specify)
Outcomes
Competent
Skills gap training
required
Further information
required
Assessor’s name:
Assessor’s initials:
_____________________
Date:
_____________________
Page 23 of 302

MEM20205 Certificate II in Engineering – Production Technology Recognition Application v1
MEM03002B
Unit description:
Perform precision assembly
This unit covers assembling and testing complex engineering components and mechanical assemblies in a
production, manufacturing environment
For the required knowledge and skills for this unit go to http://training.gov.au/Training/Details/MEM03002B
Critical aspects of assessment
Refer also to elements, performance
criteria and essential skills and knowledge
1. Read and understand job sheets
2. Select and use assembly tools and
equipment
3. Assemble engineering components
4. Adjust mechanical assemblies
5. Protect assembly from damage
Suggested supporting
evidence
Assessment tools
Performance appraisals
Position description
Referral evidence
Reports
Sample of work/project
Screening tools
Supervisor’s report
Third party reports
Training programs
Training transcripts
Workplace evidence
Assessor’s validation of
evidence
Interviewing
Questioning
Reports
Supervision reports
Skill demonstration
Third party reports
SAMPLE
Work based project
Workplace documents
Other (please specify)
Outcomes
Competent
Skills gap training
required
Further information
required
Assessor’s name:
Assessor’s initials:
_____________________
Date:
_____________________
Page 24 of 302

MEM20205 Certificate II in Engineering – Production Technology Recognition Application v1
SAMPLE
Page 25 of 302