Wireless Flexibility - Siemens

Course Description Pre-requisite Course
duration
Simatic PLC
Calendar
Year 2008
Simatic Step-by-Step
Simatic S7 Programming 2
Simatic Redundancy
System
Simatic S5
Simatic TI505 Maintenance
and Programming
Simatic S7-200
Simatic HMI Panels/ WinCC
Flexible
Provides a good foundation in Simatic Step7 software environment and skills to
handle and maintain Simatic S7-300/400 PLC.
Directed at personnel engaged in project engineering tasks who will learn to
structure and create advanced S7 programs in order to work efficiently with S7.
Overview of Siemens fault-tolerant system (Redundancy System); participants learn
how to set up and operate S7-400H Hardware Redundancy system.
Provides participants with necessary skills to use Simatic Step5 software to program
and troubleshoot Simatic S5 PLC system.
Entry-level course that covers the tasks necessary to support the design, modification,
start-up and maintenance of a typical Simatic 505 PLC system. Software is
TISOFT.
Introduction to the S7 product family and Simatic S7-200 system review. Concentration
on STEP7 Micro/WIN software, program structuring and instruction set.
Simatic HMI
Performing of a complete system configuration (graphics design, system integration
etc.) Providing skills with the user management tool including security, access,
alarms and messaging.
Background in
Automation
3 days 7-9 May
4-6 Jun
Simatic Step-by-Step 5 days 12-16 May
9-13 Jun
Simatic Step-by-Step 3 days 25-27 Jun
Background in
Automation
Background in
Automation
General Computer
Knowledge
General Computer
Knowledge
Simatic WinCC Foundation course to provide participants with concepts of WinCC SCADA software. General Computer
Knowledge
Simatic S7 Communications
Simatic NET
Foundation course to provide participants with an understanding of networking
and communication concept in Simatic S7 systems.
5 days 26-30 May
3 days 25-27Jun
1 day Upon
request
2 days 16-17 Jun
3 days 21-23 May
18-20 Jun
Simatic Step-by-Step 3 days Upon
request
Certified Profibus Installer Upgrade skills in the installation and testing of Profibus networks. None 1 day 25 Jun
Certified Profibus DP
Engineer
Certified Profibus PA
Module
Profibus Maintenance and
Troubleshooting
Simatic PCS7 System
Engineering
Simatic PCS7 Batch
Simatic PCS7 Process
Safety
RFID (Radio Frequency
Identification)
Micromaster MM4 Drive
Masterdrives Service and
Commissioning
Sinamics S120 Service and
Commissioning
Sinumeric 840D/ 810D
Start up and Service
Simocode pro Engineering
and Commissioning
Worldwide recognized training program that covers the technology, design and
operation of Profibus DP network.
Fully concentrated on Profibus PA. Only accessible for people who passed the
Standard Profibus Engineer Course.
Provides knowledge about cabling techniques, shielding, grounding and Profibus
components. Participants will be capable to maintain, strategically localize, analyze
and solve problems in Profibus installation.
Simatic PCS7
Defining a typical project and planning the system architecture. The participants
build, test and debug a simple PCS7 process system.
Review of a typical batch process model to understand process elements and
terminology including security, system administration and batch control techniques.
Introduction of unique features and benefits of the Siemens Instrumented System
(S7-400F/FH) including the programming tool Safety Matrix.
RFID (Radio Frequency Identification)
The course is designed for all Auto-ID professionals, RF engineers, system integrators
and users who need to gain critical skills to install, maintain or troubleshoot
RFID-based systems.
Drives/ Motion Control
Provides basic technical knowledge for start-up and maintenance of Micromaster
440.
The course is designed for Service and Commissioning personnel to configure the
Masterdrive VC (Vector Control).
Provides the technical knowledge to startup, parameterization, drive optimization
and troubleshooting. Skilful use of Starter commissioning tool.
SINUMERIC CNC
The course is designed for service personnel and configuration specialists responsible
for NC/PLC configuration. Configuration of machine control and in depth
knowledge about “first commissioning”.
Motor Protection & Control
Provides knowledge of Siimocode pro system functions and the linkage via Profibus
network.
None 3,5 days 26-29 May
Certified Profibus
Engineer (CPE)
1,5 days 29-30 May
None 2 days 2-3 Jun
Background in
Automation
Simatic PCS7 System
Engineering
Simatic PCS7 System
Engineering
General Computer
Knowledge
5 days 26-30 May
23-27Jun
5 days Upon
request
3 days Upon
request
4 days Upon
request
None 2 days Upon
request
Basic knowledge
in Drives
Basic knowledge
in Drives
Basic knowledge in
CNC
Knowledge of switchgear
and control gear
4 days Upon
request
5 days Upon
request
5 days Upon
request
2 days Upon
request
SITRAIN Helpdesk : +65 6490 6988 Email: adtraining.sg@siemens.com
ideas singapore | 2008 17