KODAK EASYSHARE C143 Digital Camera
KODAK EASYSHARE C143 Digital Camera
KODAK EASYSHARE C143 Digital Camera
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Troubleshooting<br />
Status Solution<br />
You cannot take a<br />
picture<br />
Memory card not<br />
recognized or camera<br />
freezes with card<br />
Computer/connectivity problems<br />
Status Solution<br />
Slide Show does not<br />
run on an external<br />
video device<br />
Computer does not<br />
communicate with<br />
the camera<br />
■ Turn the camera off, then on again.<br />
■ Depress the Shutter button all the way (see page 4).<br />
■ Insert new/charged batteries in the correct orientation (see<br />
page 1).<br />
■ When inserting a memory card, push it in until it clicks (see<br />
page 3).<br />
■ Memory is full. Transfer pictures to the computer (see page 36),<br />
delete pictures (see page 20), or insert another card.<br />
■ Use a card reader to check the card on a computer. If it’s<br />
corrupted, format the card in the camera (see page 35).<br />
■ Try another SD or SDHC Card.<br />
■ Adjust the camera Video Out setting to NTSC or PAL (see<br />
page 34).<br />
■ Make sure the external device settings are correct. (See the<br />
device’s user guide).<br />
■ Turn off the camera, then turn it back on.<br />
■ Make sure fresh batteries are installed correctly (see page 1).<br />
■ Make sure the <strong>KODAK</strong> <strong>Camera</strong> USB Cable, Micro B / 5-Pin is<br />
connected to the camera and the computer (see page 36). Then<br />
turn on the camera.<br />
■ See <strong>KODAK</strong> Software Help at www.kodak.com/go/camerasw.<br />
Direct printing (PICTBRIDGE enabled Printer) problems<br />
Status Solution<br />
Cannot print to a<br />
PICTBRIDGE Printer<br />
■ In the Setup menu, change the Computer Connection setting to<br />
Other Application (see page 34).<br />
42 www.kodak.com/go/support