Optiline Range - Reco

OPTILINE
SULKY options for tramlining
and drilling management
Pioneer of automatic tramlining, SULKY has gradually widened its range with real drilling management control
boxes, which now provide the operator an easy way to monitor his work over time.
1
ULTRON electronic control box : simple and complete
■ Disconnecting 4 metering wheels (2 x 2 rows, or 2 x 3 rows optional)
depending on the chosen tramlining rhythm (automatic pass counting based on
hydraulic side marker changing);
■ Alarms for the end of hopper and anomaly with the metering rotation;
■ On-screen information : forward speed, area covered (partial and total), the
STOP button enables the counter to be momentarily stopped if the driver has to
lift a marker to go around an obstacle (tree, pylon).
2 ULTRON MS electronic control box :
in addition, modulation
This box has all the same functions as the ULTRON while incorporating the
following additional functions.
■ Rate calibration assistance* : simply display on-screen the weight obtained
during the calibration test, then the required rate/ha, and the control box will
automatically position the setting marker on the variator through an electric
actuator.
■ Rate modulation* : during work, by +/- 10% stages (1), for example to
increase seed rate when approaching a more difficult area or to drill double
density plots (monitoring nitrogen deficiency on arable crops)
■ On/off rate control.
3 MEDION electronic control box :
the fundamentals
This economical box provides the main functions : automatic
tramlining, STOP button, on-screen information.
(1) These 10% stages can, depending on requirements, be adjusted (5% stages for example).
* Except for low rates/ha < 5 kg (ex : Rape)
12