Optiline Range - Reco

OPTILINE
LS 2.20 LS
and
3.20
Extend the limits
of Suffolk Coulters, it's possible !
Close-up view of emergence of Spring Barley on
ploughed land
LS 3.20
Exceptional
clearance
Design of this SULKY drilling system is characterised by
the use of rigid, angled tube arms and the assembly of
Suffolk coulters on 3 rows. You benefit from 330mm
clearance between each row, which is reassuring if you
prefer close row spacing (12.5cm). Thus, on minimum
tillage systems, these sowing elements always get rid of
plant trash, stones etc. better than ordinary seed drills.
"Anti-bounce" geometry
Each sowing element has individual, adjustable pressure
depth control up to 20kg. Thanks to fitting of inclined
compression springs under constant pressure, you
benefit from an 'anti-bounce' suspension. Sheltered from
the flow of soil, the springs hold the pressure even in
difficult conditions. They also provide high vertical
clearance (325mm).
The LS 3.20 toolbar on the OPTILINE MP can be fitted with 3 rows
of Suffolk Coulters, providing a 330 mm clearance
between rows and an "anti-bounce" suspension.
LS 2.20
An agronomic ...
or economic choice
• This 2 row coulter drilling system can be selected as
it is, or fitted with 40 mm wide consolidation
wheels (see description opposite)
• Regardless of your choice, you will benefit from the
same height clearance and row spacing as the
LS 3.20 model.
Centralised “double effect”
setting (see explanation page 7)
At the back of the OPTILINE MP is an
accessible handle and a graduated
quadrant, allowing the required
pressure to be obtained.
For rape and small seeds, the OPTILINE
MP's drilling system is also
characterised by its “double effect”
setting – allowing the possibility of
total pressure relief (pressure range
between 0 and 20 kg).
4