Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
• This fan air filter is a recommended option in difficult<br />
working conditions: abrasive dust, unploughed fields …<br />
(standard on OPTILINE PRO)<br />
• Hydraulically driven fan<br />
This option enables the fan rpm to be kept at a steady<br />
rate, even if the tractor PTO is disengaged or the engine<br />
speed fluctuates. It includes a pressure gauge and<br />
requires a single-acting hydraulic spool valve with<br />
separate, free-flow return. (standard on OPTILINE PRO)<br />
• Hopper extensions<br />
They add a further 350 litres capacity (3.00m) or 600<br />
litres (3.50 m, 4.00m and 4.50m).<br />
Equipped with shockproof corners, there is no risk of<br />
damage to your Big-Bags.<br />
• Full road lighting<br />
Depending on local regulations, this equipment allows<br />
you to blend in with local road traffic in full safety.<br />
Specific options<br />
for the OPTILINE PRO<br />
Levelling tines soil preparation<br />
module (optional)<br />
Interesting at the start of the season on previously<br />
prepared soils, it replaces the power harrow. This set-up<br />
makes best use of available horsepower that can be seen<br />
by high forward speeds averaging over 15 km/h.<br />
Link between toolbar and roller<br />
This standard option guarantees that the drilling<br />
elements are maintained at the correct depth<br />
independent of tine wear on the soil preparation<br />
implement. There is a choice between a versatile "large<br />
diameter" Packer roller and a Farmflex® roller.<br />
Solo fitting kit<br />
This kit allows you to work the OPTILINE PRO alone,<br />
without any soil preparation implement, transfering<br />
weight onto the roller (roller not included in fitting kit).<br />
Beneficial features<br />
• Ultra robust heavy-duty double frame: 100 mm<br />
square tube frame and strengthened levelling tine<br />
support frame<br />
• Pin-adjusted levelling tine angle<br />
• Hydraulic depth adjustment (including complete<br />
withdrawal if faced with a mass of plant trash) via<br />
"single acting" rams with a working range of<br />
between 6 and 15 cm.<br />
• High levelling capacity: 5 tines per metre on 2 rows<br />
• Interchangeable wearing part (50 x 10 mm) bolted<br />
onto tine tip<br />
• Adjustable side deflector plates for ridge-free passes<br />
• Two pairs of height-adjustable track eradicator tines<br />
with shear bolt security (optional).<br />
15