Optiline Range - Reco

More documents

Recommendations

Info

• This fan air filter is a recommended option in difficult working conditions: abrasive dust, unploughed fields … (standard on OPTILINE PRO) • Hydraulically driven fan This option enables the fan rpm to be kept at a steady rate, even if the tractor PTO is disengaged or the engine speed fluctuates. It includes a pressure gauge and requires a single-acting hydraulic spool valve with separate, free-flow return. (standard on OPTILINE PRO) • Hopper extensions They add a further 350 litres capacity (3.00m) or 600 litres (3.50 m, 4.00m and 4.50m). Equipped with shockproof corners, there is no risk of damage to your Big-Bags. • Full road lighting Depending on local regulations, this equipment allows you to blend in with local road traffic in full safety. Specific options for the OPTILINE PRO Levelling tines soil preparation module (optional) Interesting at the start of the season on previously prepared soils, it replaces the power harrow. This set-up makes best use of available horsepower that can be seen by high forward speeds averaging over 15 km/h. Link between toolbar and roller This standard option guarantees that the drilling elements are maintained at the correct depth independent of tine wear on the soil preparation implement. There is a choice between a versatile "large diameter" Packer roller and a Farmflex® roller. Solo fitting kit This kit allows you to work the OPTILINE PRO alone, without any soil preparation implement, transfering weight onto the roller (roller not included in fitting kit). Beneficial features • Ultra robust heavy-duty double frame: 100 mm square tube frame and strengthened levelling tine support frame • Pin-adjusted levelling tine angle • Hydraulic depth adjustment (including complete withdrawal if faced with a mass of plant trash) via "single acting" rams with a working range of between 6 and 15 cm. • High levelling capacity: 5 tines per metre on 2 rows • Interchangeable wearing part (50 x 10 mm) bolted onto tine tip • Adjustable side deflector plates for ridge-free passes • Two pairs of height-adjustable track eradicator tines with shear bolt security (optional). 15
OPTILINE MP fitting kits : for SULKY power harrows as well as other brands Storage stands They ensure that the OPTILINE MP has all the stability required and of course are part of the basic features. Automatic “A-frame” coupling This device is indispensable for operator safety for coupling or uncoupling the seed drill to a cultivator already present on the farm. The SULKY catalogue offers more than twenty kits corresponding to most major implement brands. The SULKY automatic coupling also has a protection casing for the OPTILINE MP's fan drive. Link between toolbar and Packer roller (1) Thanks to this type of link, OPTILINE MP seed drills offer a constant drilling depth that is unmoved by the progressive wear of the power harrow tines. You also benefit from optimum positioning of the sowing elements during the entire sowing operation. Setting links by parallelograms These adjustments enable the overhang of the machine to be even more reduced, especially if the cultivation implement is equipped with a large diameter roller. (1) Only on SULKY CULTILINE 16
Page 1 and 2: 08/2008 - GB
Page 4 and 5: OPTILINE LS 2.20 LS and 3.20 Extend
Page 6 and 7: OPTILINE UNIDISC version : even bet
Page 8 and 9: Exclusive : the “double effect”
Page 10 and 11: OPTILINE PRO : rely on it for all s
Page 12 and 13: AIR FLOW The metering Precision and
Page 14 and 15: ULTRON MS and VISION SPB electronic
Page 18: All our departments are working for

Optiline Range - Reco

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?