Integrating Net2 with an intruder alarm system - IP Way
Integrating Net2 with an intruder alarm system - IP Way
Integrating Net2 with an intruder alarm system - IP Way
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Allowing users to control the <strong>alarm</strong> <strong>system</strong><br />
Once <strong>intruder</strong> <strong>alarm</strong> software is installed, the following tick box appears in each user record. This<br />
must be ticked to give the user the authority to set/unset the <strong>alarm</strong>.<br />
Disarming the <strong>alarm</strong><br />
If the <strong>alarm</strong> is armed <strong>an</strong>d <strong>an</strong> authorised user presents their card to the IN reader.<br />
The reader will acknowledge the card but the amber <strong>an</strong>d red LED’s will flash to indicate<br />
that the <strong>alarm</strong> is set<br />
The green LED will flash when the <strong>intruder</strong> <strong>alarm</strong> has been disarmed by <strong>Net2</strong><br />
The door will open in the normal way<br />
<strong>Net2</strong><br />
V4<br />
The reader will now work as normal for all users until the <strong>alarm</strong> is armed<br />
AN1035 - <strong>Integrating</strong> <strong>Net2</strong> <strong>with</strong> <strong>an</strong> <strong>intruder</strong> <strong>alarm</strong> <strong>system</strong>