7. operating the zpm - Grass

More documents

Recommendations

Info

4. DESCRIPTION OF MACHINE COMPONENTS Illustration 4-004-01 Illustration 4-004-02 Illustration 4-004-03 Illustration 4-004-04 Illustration 4-004-05 Illustration 4-004-06 16 The star in your cabinet
4. DESCRIPTION OF MACHINE COMPONENTS 4-003 Description of Operating Elements Toggle lever, left and right The toggle lever is used to close and open the Zargen press. Place all the individual parts in the Zargen press, which is in the open position. Press all the individual parts, which comprise the complete drawer in the Zargen press, which is in the closed position. Take the finished drawer out of the Zargen press, which is in the open position. Index pin The index pin positions the machine for preset drawer widths. Right and left start buttons Operating both buttons, left and right, at the same time (within 0.5 second) begins the compression operating process. 4-004 Functions of the ZPM - Producing Drawers with the ZPM Illustrations 4-004-01, 02, 03, 04, 05, 06 All machines manufactured since 1995 are equipped with a pneumatic 2-handed safety control system. The compression cycle first begins when both start buttons are operated simultaneously (within 0.5 second). After one of the start buttons is released, both compression slides return to their starting positions. The start buttons may only be activated when the toggle lever is completely closed. Sequence of the operating cycle: - Pull the index pins. Move the right unit carrier to the drawer width’s corresponding index stop. Release the index pins. (These must engage in the index stops). - Open both toggle levers. - Push the stop pin of the corresponding front height stop „1“ up. - Push the stop pin of the corresponding back wall height stop „2“ (Illustration 4-004-01) up. - Load the drawer front with the dowel bore holes up and the front lower edge towards the machine operator. - Place the drawer bottom with the bottom groove towards the machine operator. - Place the drawer back wall with the dowel bore holes up and the back wall lower edge towards the machine operator (Illustration 4-004-02). - Load both Zargen slides (Illustration 4-004-03). - Close both toggle levers. - Press both start buttons on the toggle levers (simultaneously within 0.5 seconds - 2-handed control system). - Now the compression process begins. Both compression slides move diagonally towards the bottom and the bottom grip devices are pressed into the bottom groove. After the bottom grip devices are pressed in, both compression slides move downward; the back wall dowel - compression die fence presses on the back wall dowel; the front compression die fence presses on both front dowels; the Zargen slide is pushed underneath in the bottom groove, until all the dowels are completely pressed in. (Illustration 4-004-04). - The compression process has ended. Release both start buttons. - Wail until both compression slides have reached the highest position (Illustration 4-004-05). - Open both toggle levers (Illustration 4-004-06). - Remove the completely assembled drawer. Note: If the drawers to be pressed together are using the Grass Railing System 6100, we recommend mounting the corresponding railing fasteners to the front and back wall before the front and back wall are placed in the Zargen Press ZPM. The star in your cabinet 17
Page 1 and 2: OPERATING INSTRUCTIONS Grass ZPM Th
Page 3 and 4: TABLE OF CONTENTS 1. General 5-6 1-
Page 5 and 6: LIST OF ILLUSTRATIONS 1-001 List of
Page 7 and 8: 2. SAFETY INFORMATION 2-001 Safety
Page 9 and 10: 2. SAFETY INFORMATION 2-005 Descrip
Page 11 and 12: 3. DESCRIPTION OF PRODUCTS 3-001 Us
Page 13 and 14: 4. DESCRIPTION OF MACHINE COMPONENT
Page 15: 4. DESCRIPTION OF MACHINE COMPONENT
Page 19 and 20: 5. SHIPPING AND INSTALLATION OF MAC
Page 21 and 22: 6. START-UP 6 7 5 4 2 14 12 4 A 5 1
Page 23 and 24: 7. OPERATING THE ZPM 7-001 Checking
Page 25 and 26: 7. OPERATING THE ZPM 7-002 Mounting
Page 27 and 28: 7. OPERATING THE ZPM 7-004 Changing
Page 29 and 30: 7. OPERATING THE ZPM 7-008 Setting
Page 35 and 36: 8. TROUBLE SHOOTING AND PROBLEM SOL
Page 37 and 38: 10. MISCELLANEOUS 10-001 Guarantee
Page 39 and 40: 10. MISCELLANEOUS 10-002 Disposal F
Page 41 and 42: 10. MISCELLANEOUS 1-003 Resale Form
Page 43 and 44: 10. MISCELLANEOUS 10-004 Questionna
Page 45 and 46: 10. MISCELLANEOUS 10-004 Questionna
Page 47 and 48: REPRESENTATIVES AROUND THE WORLD Au

7. operating the zpm - Grass

Create successful ePaper yourself

Delete template?

Save as template?