You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Communication<br />
<strong>TP</strong>, <strong>TP</strong>D, <strong>TP</strong>E<br />
Communication with <strong>TP</strong>E pumps<br />
Communication with <strong>TP</strong>E pumps is possible via a central<br />
building management system, remote control<br />
(Grundfos R100) or control panel.<br />
Central building management system<br />
The operator can communicate with a <strong>TP</strong>E pump at a<br />
distance. Communication can take place via a central<br />
building management system allowing the operator to<br />
monitor and change control modes and setpoint settings.<br />
Remote control<br />
The R100 remote control produced by Grundfos is<br />
available as an accessory.<br />
The operator can communicate with the <strong>TP</strong>E pump by<br />
pointing the IR-signal transmitter at the control panel of<br />
the terminal box.<br />
TM03 0141 4104<br />
LON-bus connection<br />
Fig. 11 R100 remote control<br />
The operator can monitor and change control modes<br />
and settings of the <strong>TP</strong>E pump via the R100 display.<br />
Control panel<br />
The operator can change the setpoint settings manually<br />
on the control panel of the <strong>TP</strong>E pump terminal box.<br />
G10-LON<br />
Inteface<br />
GENIbus connection<br />
<strong>TP</strong>E pump<br />
TM02 6592 1103<br />
Fig. 12 Control panel of a <strong>TP</strong>E pump<br />
TM00 7600 0404<br />
Fig. 10 Structure of a central building management<br />
system<br />
28