Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Batteries<br />
BATTERY TERMINAL ADAPTER<br />
KIT<br />
Great for custom jobs or when you just can't<br />
get the battery type with the terminals in the<br />
exact stock location.These adapters are made<br />
from pure brass and change the terminal<br />
position by 45 degrees. Set contains 2<br />
adapters with four M6 lead plated battery<br />
screws.<br />
251277 Brass battery terminal adapter<br />
kit<br />
RUBBER BATTERY STRAP<br />
Fits 1991 to present FXST & FLST, 1980 thru<br />
1992 FL(H)T, 1977 thru 1978 XLCR &1979<br />
XL (OEM 66105-77).<br />
301777 Battery strap<br />
STAINLESS STEEL BATTERY HOLD<br />
DOWN STRAPS<br />
Polished battery straps manufactured from<br />
18-gauge stainless steel to exceed<br />
OEM specifications. Includes nuts and<br />
washers.<br />
301361 Fits FL 1965 thru 1969<br />
(OEM 66383-65T)<br />
301363 Fits FL 1970 thru 1984<br />
(OEM 66383-70T)<br />
301367 Fits FX and XL kickstart models<br />
1970 thru 1978<br />
(OEM 66470-70T)<br />
301364 Fits electric start FX(R) models<br />
(except Softail) 1973 thru 1986<br />
and Sportster models 1982 thru<br />
1997 (OEM 66476-73T)<br />
301533 Fits Sportster models 1998 to<br />
present (OEM 66476-98)<br />
BATTERY TRAY CUSHION RUBBER<br />
Battery tray cushion rubbers as used on most<br />
models from 1997 to present. Made from oil,<br />
acid and heat resistant NBR rubber.Also fits<br />
most aftermarket and Custom made battery<br />
trays for Softail, FXR and Dyna models<br />
(OEM 66210-97).<br />
013205 Battery tray cushion rubber<br />
SOFTAIL BATTERY CUSHION<br />
Replacement battery cushion for Softail<br />
models. Cushion is oil and heat resistant,<br />
absorbs engine vibration and protects the<br />
battery against cracking thus leakage. Fits<br />
1986 to present Softail models<br />
(OEM 66210-85B).<br />
013200 Softail Battery cushion<br />
BATTERY CARRIER TRAYS<br />
Chrome-plated battery carrier complete with<br />
battery pad, rubber mounting studs, brackets<br />
and all other mounting hardware necessary<br />
for installation.<br />
013108 Fits FL 1970 thru 1984<br />
(OEM 662<strong>04</strong>-74)<br />
013110 Fits electric start FX (except<br />
FXST) models 1973 thru 1986<br />
(OEM 66191-73)<br />
BATTERY CABLES AND<br />
HARDWARE<br />
Bad battery or starter motor cables cause<br />
usually starting problems. There can be a<br />
tremendous Voltage drop due to a bad cable,<br />
a bad connection of the cable to the eyelet or<br />
in the connection of the eyelet and the user.<br />
Therefore battery cables should be regularly<br />
checked and if needed renewed.These battery<br />
cable kits allow you to make a low resistance,<br />
high quality cable at any length. These kits<br />
are ideal for Custom Bike builders and anyone<br />
else who wants to use a different model<br />
battery or wants to relocate the battery<br />
carrier. Kits come with classic copper cable<br />
with high insulating black covering. Our<br />
convenient shop kits contain 5 meter of<br />
battery cable and a unbreakable plastic box<br />
with 10 eyelets with 1/4" eyes, 10 eyelets<br />
with 5/16" eyes and 10 black shrink sockets<br />
to give the finishing touch to your Custom<br />
build cables.The battery cables are separately<br />
available in 5 meter length. Eyelets and<br />
shrink-socket tubes are separately available<br />
in 10 packs.<br />
Shop kits<br />
741180 Kit with 5 meters of classic<br />
black covered copper, cable<br />
Custom Battery & Starter cable<br />
239231 Classic black covered copper<br />
cable, 5 meter<br />
Soldering and eyelets (10 pack)<br />
239236 With 6 mm hole<br />
239237 With 8 mm hole<br />
236164 Shrink sockets 9.5 mm<br />
700990 Assortment box, only<br />
<strong>04</strong><br />
Lighting & Indicators<br />
<strong>04</strong>-109
Change language