You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Turnsignal Mounts<br />
ADJURE SIDE PLATE TURN<br />
SIGNAL MOUNTS<br />
Side plate mounts to install turn signals on<br />
your passenger peg mounts and due too their<br />
ingenious design, they can also be used to<br />
mount your turn signals up front on Springer<br />
forks. Originally designed by Adjure for their<br />
Beacon-1 and Beacon-2 turn signals but, as<br />
they are 5/16"-24 UNF threaded they will<br />
also take stock or aftermarket Deuce-style<br />
turn signals. Wires exit the bracket from the<br />
bottom enabling an extremely clean<br />
installation and the mounts allow a 180<br />
degree positioning. Precision made from<br />
forged aluminum, then hand polished and<br />
perfectly chromed. Sold in pairs.<br />
639017 Chrome side plate turn signal<br />
mounts, pair<br />
ADJURE TURN SIGNAL SWING<br />
ARM & TUBE MOUNTS<br />
These mounts eliminate the need to drill<br />
mounting holes in fenders or fender struts.<br />
They come complete with neoprene bushings<br />
to ensure a good fit to any 1" (25 mm), 1<br />
1/8" (28 mm) and 1 1/4" (32 mm) tube, such<br />
as used in most Softail swing arms. Originally<br />
designed by Adjure for their Beacon-1 and<br />
Beacon-2 turn signals but, as they are 5/16"-<br />
24 UNF threaded they will also take stock or<br />
aftermarket Deuce-style turn signals. Wires<br />
exit the bracket from the bottom enabling an<br />
extremely clean installation. Precision made<br />
from forged aluminum, then hand polished<br />
and perfectly chromed. Sold in pairs.<br />
639018 Chrome turn signal tube<br />
mounts, pair<br />
TURN SIGNAL MOUNTING<br />
BRACKET<br />
Everything necessary for installing ZPN<br />
165039, 160271 or 160272 turn signal<br />
assemblies on the front of FL models from<br />
1968 thru 1992. The universal mounting<br />
clamp permits installation on a variety of<br />
motorcycles.<br />
345158 Complete kit, set of two<br />
(OEM 68518-68)<br />
345163 Standoff only, sold each<br />
(OEM 68519-68)<br />
345164 Clamp only, sold each<br />
(OEM 68795-68)<br />
TURN SIGNAL MOUNT KIT<br />
This chrome plated kit allows you to mount<br />
the front turn signals horizontally to the<br />
handlebar controls. Contains right and left<br />
bracket with swivel adjustment. Fits models<br />
equipped with handlebar mounted bullet<br />
style turn signals.All hardware included.<br />
162113 Turn signal mount kit<br />
<strong>04</strong><br />
Lighting & Indicators<br />
CYCLE KRAFT MARKER LIGHT<br />
HOLDERS<br />
Cycle Kraft marker light holders are made by<br />
Ken's Factory from billet aluminum with a<br />
polished finish or black anodized with clear<br />
cuts. They bolt to the side of the triple trees<br />
on all FLH and FLT series Touring models 1993<br />
to present to provide a stunning looking<br />
support to most marker lights. Sold in sets for<br />
left and right.<br />
747321 Polished<br />
747322 Black anodized with clear cuts<br />
FRONT TURN SIGNAL SUPPORT<br />
Chrome-plated front turn signal support. Fits<br />
FXRS,FXLR and Dyna Glide models 1987 thru<br />
2000 (OEM 68555-87).<br />
162273 Front turn signal support<br />
<strong>04</strong>-<strong>04</strong>1