LOCK User Manual - Integral Memory PLC

More documents

Recommendations

Info

<strong>LOCK</strong>v100 You will be reminded with the following message if you have typed in the wrong password for the fifth time. If you typed in the wrong password for the sixth time, your device gets formatted automatically. If you have forgotten your password, click on the password hint and see if it reminds you with your password. Enter the correct password and your password will be disabled (removed). page 9
<strong>LOCK</strong>v100 E4. Unlock Device If you have setup a password, when you removed your device from USB port (or if there is a suspension in power), partition 1 of your device gets locked automatically. You will not be able to access this partition 1, nor read or write data to this partition 1. Press the third button on the right to “Unlock” the partition temporarily. page 10
Page 1 and 2: Security Application Program - LOCK
Page 3 and 4: LOCKv100 A. Introduction υ This LO
Page 5 and 6: LOCKv100 D. Before Using the Securi
Page 7 and 8: LOCKv100 Setup Password : If there
Page 9: LOCKv100 E3. Disable Password Press
Page 13 and 14: LOCKv100 If you typed in the wrong
Page 15 and 16: LOCKv100 Press the middle button on
Page 17 and 18: LOCKv100 You can see the change in
Page 19: LOCKv100 H. FAQ - Frequently Asked

LOCK User Manual - Integral Memory PLC

Create successful ePaper yourself

Delete template?

Save as template?