LOCK User Manual - Integral Memory PLC

More documents

Recommendations

Info

<strong>LOCK</strong>v100 You will be prompted to enter your password. Press do not want unlock partition 1. (cancel) to cancel, if you You have six chances to enter the password correctly, before your device gets formatted. You will be reminded with the following message if you have typed in the wrong password for the fifth time. page 11
<strong>LOCK</strong>v100 If you typed in the wrong password for the sixth time, your device gets formatted automatically. If you have forgotten your password, click on the password hint and see if it reminds you with your password. Once you have entered the correct password, partition 1 will available temporarily until you remove your device from USB port or if there is a suspension in power. When partition 1 is unlocked, you can read or write data to the partition. page 12
Page 1 and 2: Security Application Program - LOCK
Page 3 and 4: LOCKv100 A. Introduction υ This LO
Page 5 and 6: LOCKv100 D. Before Using the Securi
Page 7 and 8: LOCKv100 Setup Password : If there
Page 9 and 10: LOCKv100 E3. Disable Password Press
Page 11: LOCKv100 E4. Unlock Device If you h
Page 15 and 16: LOCKv100 Press the middle button on
Page 17 and 18: LOCKv100 You can see the change in
Page 19: LOCKv100 H. FAQ - Frequently Asked

LOCK User Manual - Integral Memory PLC

Create successful ePaper yourself

Delete template?

Save as template?