LOCK User Manual - Integral Memory PLC

More documents

Recommendations

Info

LOCKv100 E5. Configure Partition Sizes You can change the sizes of the two partitions (public and secure). Partition 1 Secure Area Partition 2 Public Area page 13
LOCKv100 Press the middle button on the bottom of the LOCK application program to resize public and secure partition areas. You need to “Disable” you password first, before you can use this “Configure Size” (resizing) function, if you have already setup a password. Follow section E3 of this manual to disable your password. A warning message will show, telling you that data will be destroyed. If you have not yet backed up your data, press (cancel) to cancel the operation and back up your data first; otherwise, press (apply) to continue. page 14
Page 1 and 2: Security Application Program - LOCK
Page 3 and 4: LOCKv100 A. Introduction υ This LO
Page 5 and 6: LOCKv100 D. Before Using the Securi
Page 7 and 8: LOCKv100 Setup Password : If there
Page 9 and 10: LOCKv100 E3. Disable Password Press
Page 11 and 12: LOCKv100 E4. Unlock Device If you h
Page 13: LOCKv100 If you typed in the wrong
Page 17 and 18: LOCKv100 You can see the change in
Page 19: LOCKv100 H. FAQ - Frequently Asked

LOCK User Manual - Integral Memory PLC

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?