Weishaupt dual fuel burners Sizes 30 to 70 ... - Pamber Energy

Dual fuel burner selection
Model RGL50, 1LN version
[“WC] Burner model RGL50/1-B, vers. ZM-1LN
Combustion head G40/2-LN 217x35K
MBH Natural gas 1,700 – 11,600
Propane 1,700 – 11,600
GPH Light oil #2 20 – 82
Combustion head “open”
Combustion head “closed”
[“WC ] Burner model RGL50/2-A, vers. ZM-1LN
Combustion head G50/2-LN 260x40
MBH Natural Gas 2,050 – 16,730
Propane 2,730 – 16,730
GPH Light oil #2 21 – 120
Combustion head “open”
Combustion head “closed”
8
7
6
5
4
3
2
1
0
Nat gas/LPG
Light oil
-1
[MBH] 0 2,000 4,000 6,000 8,000 10,000 12,000 14,000
8
7
6
5
4
3
2
1
0
Nat gas
Propane
Light oil
Light oil
-1
[MBH] 0 2,000 4,000 6,000 8,000 10,000 12,000 14,000 16,000 18,000
[GPH] 0 10 20 30 40 50 60 70 80 90
[GPH] 0 20 40 60 80 100 120
Burner model Version
RGL50/1-B ZM-1LN
RGL50/2-A ZM-1LN
The ratings given are based on fuel with low calorific value
and an installation altitude of 0 ft. (0 m). Depending on the
altitude of the installation, a reduction in capacity of
approximately 1% for every 328 ft. (100 m) above sea level
should be taken into account.
The stated oil throughputs are based on a calorific value of
140,000 BTU/Gal for light oil
Voltages and frequencies:
As standard, the burners are suitable for three phase alternating
current available with various voltages from 208 - 600V, 60Hz.
Different voltages and frequency are available on request.
Standard burner motor:
Isolation class F, IP 54 protection
10