Instruction Manual book - Pichler

More documents

Recommendations

Info

YAK 55 - ITEM CODE:BH111. Instruction Manual REPLACEMENT SMALL PARTS 1. 4. 2. 3. 6. 5. 1. Aluminium landing gear. 2. Wheels. 3. Fuel Tank. INSTALLING THE AILERON SERVOS. 1. Install the rubber grommets and brass eyelets onto the aileron servo. 4. Spinner. 5.Engine mount ply of wood . 6. Tail gear set. Aileron Bottom side 2) Using a modeling knife, remove the covering at possition show below. 3) Using the thread as a guide and using masking tape, tape the servo lead to the end of the thread: carefully pull the thread out. When you have pulled the servo lead out, remove the masking tape and the servo lead from the thread. 4
YAK 55 - ITEM CODE:BH111. Instruction Manual 4) Drill 1,6mm pilot holes through the block of wood for each of the four mounting screws provided with the servo. Electric wire Thread Aileron Control horn. 5. Instal servo tray with aileron servo into the wing as same as picture below. 3.INSTALLING THE AILERON LINKAGES. Installing the aileron linkages as pictures below. 55 mm Secure 2x8 mm. Secure. Repeat the procedure for the other wing half. INSTALLING THE AILERON CONTROL HORN . 3 x 20 mm. Secure. Install aileron control horn as same as picture below. Aileron Bottom side Repeat the procedure for the other wing half. 5
Page 1 and 2: Instruction Manual book ITEM CODE:
Page 3: YAK 55 - ITEM CODE:BH111. Instructi
Page 7 and 8: YAK 55 - ITEM CODE:BH111. Instructi
Page 9 and 10: YAK 55 - ITEM CODE:BH111. 6) When

Instruction Manual book - Pichler

Create successful ePaper yourself

Delete template?

Save as template?