the Scraper Mixer - Breville

CARE AND CLEANING
Cleaning after use
1. Always ensure the speed control dial is
in the ‘0 – Stand By’ position, the mixer
is switched off at the power outlet and
the power cord is unplugged.
2. Remove the scraper beater, dough hook
or whisk and mixing bowl from the
mixer. Follow instructions in ‘Assembly
and Operation' of your mixer. Wipe the
mixer motor head and mixer stand with
a soft, damp cloth then dry thoroughly.
3. Wipe any excess food particles from the
power cord.
4. Wash the bowl, scraper beater, dough
hook, and whisk in warm soapy water
with a soft cloth or they can be washed in
the dishwasher. Rinse and dry thoroughly.
A small bottle brush can be used to clean
inside the neck of the attachments if needed.
NOTE
Do not use abrasive scouring pads
or cleaners when cleaning the
mixing bowl, scraper beater, dough
hook or whisk as these may scratch
the surface. Also ensure that the
attachments are not soaked in water
for extended periods of time, for
example several hours or overnight,
as this may damage the finish.
Storage
Your mixer should be kept in a convenient
position on your kitchen bench top or in an
accessible cupboard.
Always ensure the speed control dial is
in the ‘0 – Stand By’ position, the mixer
is switched off at the power point and the
power cord is unplugged.
Store the mixing bowl in the bowl locking
recess in the mixer stand.
Place the attachments inside the mixing
bowl and lower the mixer motor head into
the horizontal (closed) position.
NOTE
The motor head cannot be taken off
the base for any purpose.
WARNING
Never immerse the mixer, power cord
or plug in water or any other liquid.
NOTE
Do not wash or immerse the mixer
motor head and mixer stand in water
or any other liquid. Clean with a soft,
damp cloth and dry thoroughly. Do
not allow water or any liquid to enter
the gear system as damage may result.
15