JJC WS Series WIRELESS CONTROLLER - JJC Professional ...

JJC WS Series WIRELESS CONTROLLER
Thank you for purchasing JJC WS series wireless controller. For the best performance, please read
this instruction carefully before using.
1. Turn off the camera and the WS receiver.
2. Attach the receiver to a compatible camera’s accessory shoe.
3. Remove the remote socket cap from camera body.
4. Connect the receiver cable to the remote socket.
5. Mount the camera on a tripod or place the camera on a stable, level surface.
6. Turn on the camera and receiver to enjoy wireless trigger.
Slide the function button in the W Mode. The receiver is active. Under this condition, the receiver can
receive the signal from the transmitter; the receiver consumes the power of the battery. User can use
the Shutter button of the transmitter and Focus button to trigger the Camera’s shutter and focus.
Press the transmitter’s shutter button to take a photo. Press the transmitter’s Focus button to focus.
Slide the function button in the O Mode. The receiver is turnoff. Under this condition, the transmitter
can not active the receiver to control the camera. The receiver will not consume any power of the
battery. User can use the shutter button of the receiver to take photos. Press the shutter button
halfway to focus. Press it fully to take a photo.
1

Slide the function button in the L Mode and turn on the camera to BULB mode. Under this condition,
the transmitter opens the lens; Slid the function button back to O Mode, the transmitter closes the
lens. When the camera is under no-Bulb mode and taking the photo, the transmitter will lock the
shutter button, and the camera will implement continuous shooting. Under L mode, the transmitter
cannot control the receiver.
Operating range
Maximum operating ranges up to 100m. (The operating range may be obstruction or interference with
other electronic equipment to reduce the distance)
To replace the Battery
1. The WS receiver is powered by two AAA batteries and the WS transmitter is powered by one
23A battery which are already included in package.
2. Open the battery cover at the back of remote controls.
3. Insert the fresh battery, please ensure the batteries are put into a correct direction.
4. Close the battery cover
2

Specifications
WS Receiver:
• Battery Type: 2x AAA battery.
• Operating temperature: 5 °C to 40 °C (40 °F to 105 °F).
• Net Weight Approximately: 70 g
• Dimensions: 110 X 45 X 17 mm
• Length of cord approximately: 100cm
WS Transmitter:
• Battery Type: 1x 23A battery.
• Operating temperature: 5 °C to 40 °C (40 °F to 105 °F).
• Net Weight Approximately: 29 g
• Dimensions: 88 X 37 X 17 mm
• Attention:
• When the remote control is not in used over a long time, please remove the battery from the
transmitter and receiver.
• Do not leave the remote controls in places subject to extremely high temperature.
• The operable range of the wireless controller will shorten under the following circumstance.
1. When strong light strikes the camera.
2. When the battery is weak.
WS-A compatible with Canon
EOS 5D EOS 1D EOS 1D Mark II EOS 1Ds EOS 1Ds Mark II
EOS 1Ds Marks III EOS 20D EOS 10D EOS D60 EOS D30
EOS 30D EOS 5D EOS 1V EOS 3 EOS D2000
EOS 50D EOS 5D Mark II EOS 7D EOS 1D Mark IV
WS-B compatible with Nikon/ Kodak/ Fujifilm
D2H D1x D1h D1
D2x *D100 D200 F5
Nikon
D2Xs D700 D3x D300s
D3s
F6 F100 F90 F90x
Kodak
DCS-14n
Fuji Finepix S5pro Finepix S3pro
*Via the Power Battery Holder
WS-C compatible with Canon/ Pentax/ Contax/ Samsung
K100D K110D K20D K200D
PENTAX
*ist D *ist Ds *ist K7
MZ-6 ZX-L MZ-L
3

CONTAX
645 N N1 NX
N Digital
Samsung GX-1L, GX-1S GX-10 GX-20
EOS 30 EOS 33 EOS 50E EOS 300
EOS 300V EOS 300D EOS 350D
EOS 3000
CANON
EOS 50 EOS 500 EOS 55 EOS 500N
EOS 300X EOS Kiss EOS New Kiss EOS Kiss 7
EOS Kiss III EOS 7 EOS 7s EOS400D
EOS 450D EOS REBEL XSI EOS KISS X2 EOS 1000D
EOS Digital Rebel
EOS Digital Rebel XT
EOS Digital Rebel xti Kiss Digital Kiss Digital N
ELAN 7N ELAN II ELAN DATE ELAN 7
ELAN 7NE ELAN 7N ELAN IIE Rebel 2000
Rebel G Rebel T2 Rebel Ti Rebel X
Rebel XS EOS 1000D EOS 500D Rebel T1i
EOS 550D Rebel T2i G10 G11
WS-D compatible with Panasonic
DMC-FZ15 DMC-FZ20 DMC-FZ20k DMC-FZ20S
DMC-FZ30 DMC-FZ30K DMC-FZ30S DMC-FZ50K
Panasonic DMC-FZ50S DMC-FZ50 LC-1 L1
DIGILUX 2 DIGILUX 3 L-10 DMC-G1
DMC-GH1 DMC-GF1 DMC-G2 DMC-G10
Leica DIGILUX3 DIGILUX2 V-LUX1
WS-E compatible with Olympus
E1 E10 E20 E20N
Olympus
E300 * E100RS C8080 * C7070 *
C5060 * C2500L E3
*Via the Power Battery Holder
WS-F compatible with Sony/ KonicaMinolta
A100 A200 A300 A350
Sony
A700 A900 A500 A550
A850
A450
KonicaMinolta Maxxum 7D Maxxum 5D Dynax 7D Dynax 5D
Maxxum 9 Maxxum 7 Maxxum 4 Maxxum 3
Dynax 9 Dynax 7 Dynax 4 Dynax 3
Maxxum 807si Maxxum 700si Maxxum 600si Maxxum 505si
Maxxum 500si Dynax 505si Dynax 500si Dynax Sweets
Maxxum 9000 Maxxum 7000 Maxxum 5000 Dynax 9000
Maxxum 800si Dynax 807si Dynax 800si Dynax 600si
4

Dynax 7000 Dynax 5000 DiMAGE 7Hi Dynax 700si
DiMAGE 7 DiMAGE 5 DiMAGE A1 DiMAGE A2
DiMAGE 7i Dynax Sweet Maxxum Sweets
WS-G compatible with Nikon
Nikon D70S D80
WS-H compatible with Sigma
Sigma SD-9 SD-10
WS-I compatible with Sigma
Sigma
SD14
WS-J compatible with Olympus
SP-510 UZ SP-550 UZ SP-560 UZ SP-565 UZ
SP-570 UZ SP-590 UZ E400 E410
Olympus
E420 E450 E510 E520
E600 E620 E30 E-P1
E-P2
WS-K compatible with Fujifilm
Fujifilm Cameras
FinePix S100FS FinePix S9000 FinePix S9100 FinePix S9500 FinePix S9600
IS-1 S20 FinePix S205EXR FinePix S200EXR
WS-M compatible with Nikon
Nikon D90 D5000
WS-S compatible with SONY Cyber-Shot
DSC-F717 DSC-F828 DSC-R1 DSC-V1
SONY
DSC-V3 DSC-F707 MVC-CD500
Copyright of JJC Technology
WWW.JJC.CC
5