PRODUCT GUIDE Volume 9 - Martin

accessories
A comprehensive range of accessories is available to enhance
the capabilities of our fog and haze generators. Every installation,
theatrical production or staged event has specific requirements
and Martin smoke machine accessories help to tailor our
standard range of machines for these special applications.
Our fog and haze machines are designed to give long reliable
service. However, it is quite conceivable that your requirements
might change and when they do, many of yesterday’s models
can be simply upgraded for today’s needs.
DUCTING SYSTEMS
The range of Ducting Systems is designed for use when the fog needs to be distributed
to less accessible locations. The wide diameter ducting will minimize condensation and
maximize fog flow.
• Available for: Magnum 650, Magnum 850, Magnum 1200, Magnum 1800,
Magnum 2000, ZR44 Hi-Mass, Glaciator X-Stream and Roadie Compact.
• Ducting Systems come with ducting adapter and 5 meters of ducting.
• Glaciator Twin Ducting System - includes twin outlet ducting
adapter, fixings and 2 x 5 m of 150 mm diameter ducting.
DRIp TRAYS
All installers of night club fogging systems will appreciate this useful accessory. The slim
line tray simply attaches to the front edge of the fog machine and is designed to catch
any small drops of condensation, which typically form around the fog output nozzle. The
tray is fitted with a highly absorbent material, which will dry out automatically thanks to
the heat transfer from the machines’ vaporizing chamber.
HYDRA ACCESSORIES
The list of accessories for the Hydra system is available for larger installations or longer
fluid line runs. Also the list features the Self-sealed Connectors that allow you to easily
service the system or even take it on touring!
• Self-seal Connector 2x6 mm
• Self-seal Connector 2x10 mm
• Connector 2x10 mm straight
• Tubing 10 mm, 30 m
• Tubing 6 mm, 50 m
MAGNUM CLUB SMOKE ACCESSORIES
The Magnum Club Smoke is supplied with the accessories needed to get you started.
However, it may be necessary to extend fluid lines or add extra Fog Heads. A full range
of fluid line connectors is available to meet the varying challenges of club installations.
All fittings are of a “push-in” type and require no tools.
• 6 mm Nylon Fluid Line
• 6 mm to 6mm Push-in Connectors (for joining lengths of 6mm fluid line)
• 6 mm “T” Connector (for splitting fluid supply to an additional (Fog Head)
DMx INTERfACE
Martins range of DMX interfaces for Magnum and Jem smoke machines allows you to
upgrade most models of Fog and Haze Machines from Analog control (standard fog
machine controller) to accepting a control signal from a DMX Source.
• DMX Interface for Magnum 2000
• DMX Interface for Magnum 1200
• DMX Interface for Magnum 2500 Hz
REMOTE CONTROL
Many Martin fog and haze machines are supplied with a remote control, or with the
possibility to use a remote control. Martin offers several remote controls such as simple
on/off remotes, timer and output control remotes, and digital remote controls to run fog
and haze machines from backstage.
MARTIN SMOKE
259