P3-100 System Controller The P3-100 System Controller is a robust video signal processing and distribution unit that allows video to join with lighting and scenic technologies for true visual integration. Based on embedded Linux and solid state storage, just one P3-100 Controller can handle up to 500,000 pixels scaled to any size. features • Built in scaling and de-interlacing • Supports both DVI (up to SXGA@75Hz) as well as analog video signals (CVBS, S-Video & Component) • Allows key parameters including brightness and image mapping to be manipulated in real time using DMX512 Specifications • Built-in graphical user interface • Real time visualization of the video mapping within the GUI (Graphical user interface) • Configurations can be conveniently exported onto a USB stick • LED panels communicate with the P3-100 Controller to report any problems pHYSICAL Depth: 380 mm (15.0 in.) Width: 482 mm (19.0 in.) Height (rackmount 2U): 90 mm (3.5 in.) Weight: 7.7 kg (17.0 lbs.) CONTROL/USER INTERfACE User interface: SXGA (1280 x 1024) or better monitor, keyboard, mouse Device status: Status indicator LEDs DMX512 remotely controllable parameters Panel: Intensity, RGB adjustment, video image position, video image rotation P3-100: Freeze frame, blackout, preset recall, test, color temperature Video Processing Processor capacity: 500 000 pixels with P3-100 System Controller Output resolution: Any within 500k pixel limit Total system latency: Less than 3 frames (worst case) DVI video input: Up to 1280 x 1024, 50/60/75 Hz Analog video input: Composite, component and S-video Frame synchronization to analog input signal Image rotation Scaling De-interlacing Gamma curve selection and adjustment Real-time panel content remapping p3 SIGNAL pROTOCOL Signal type: Gigabit Ethernet Protocol: Proprietary <strong>Martin</strong> P3 Hot pluggable: Yes, electrically isolated at all connections Cable type: Cat 5e Cable length: Up to 100 m (328.1 ft.) between any 2 devices, extendable with Ethernet switch Max. number of panels per line: 50, extendable with Ethernet switch Latency between first and last panel: None CONSTRUCTION Housing: Steel and aluminum Color: Matt black Protection rating: IP20 INSTALLATION Mounting: 19-inch rackmount (2U) CONNECTIONS Power input: IEC socket, power cables supplied P3 data in/out: RJ-45 socket Ethernet in/out: RJ-45 socket DVI video in: DVI-D (DVI-I connector provided) Analog video in: BNC DMX in: 5-pin locking XLR Peripherals and USB memory devices: 4 x USB ports Analog monitor: DD15 Serial data (available for future options): RS-232 via DB9 connector ELECTRICAL AC power: 115-250 V, 47-63 Hz Power supply unit: Integrated, universal multi-voltage Main fuse: 1 A, T (slow blow) Thermal Cooling: Forced air Maximum ambient temperature (Ta max.): 50° C (122° F) Minimum ambient temperature (Ta min.): 0° C (32° F) AppROVALS EU safety: EN 60950-1 EU EMC: EN 55022, EN 55024, EN 61000-3-2, EN EN 61000-3-3, EN 6100-4-2, EN 6100-4-3, EN EU EMC: 6100-4-4, EN 6100-4-5, EN 6100-4-6, EN 6100-4-11 US safety: ANSI/UL 60950-1 Canadian safety: CSA C22.2 No. 60950-1 INCLUDED ITEMS EU-type power cable with Schuko connector US-type power cable UK-type power cable 30 m (98.4 ft.) Ethernet data cable with IP67-rated RJ-45 connector: P/N 11840145 1.5 m (4.9 ft.) power throughput cable with IP67-rated connectors (single-phase power systems): P/N 11521031 Installation and safety manual: P/N 35000218 User documentation CD: P/N 35005008 ORDERING INfORMATION <strong>Martin</strong> P3-100 System Controller: P/N 90721010 LC Plus 2140 panel, in flightcase: P/N 90354101 LC Plus 2140 panel, in cardboard box: P/N 90354102 VIDEO 155
LIGHTING CONTROLLERS M1 Maxxyz Compact M-pC iphone MAxRemote MaxModule Cerebrum MaxModule programmer MaxModule playback MaxModule Submaster MaxModule Button MaxModule frame Ether2DMx8 LightJockey 2 2510 Controller xciter freekie Colorfox Light fox <strong>Martin</strong> ShowDesigner USB Duo DMx Interface RS-485 Optosplitter MUM/DABS1 157
Change language