You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Flightcases<br />
In order to fully protect and conveniently transport <strong>Martin</strong> lights while on the<br />
move, a full range of durable flight cases is available.<br />
Built to endure the rigors of the touring and rental market, these classic cases<br />
are manufactured from top-quality, water-resistant 9 mm ply. The exterior is<br />
covered in a tough, water-repellent, black grained finish with 30 mm aluminum<br />
edge protection and tough steel corners.<br />
Resilient roller castors are mounted to the base for easy roll-on/roll-out and<br />
convenient spring-back, steel carrying handles provide for easy grip and handling.<br />
For a full list of existing flightcases check out www.martin.com/flightcases<br />
Clamps<br />
<strong>Martin</strong> clamps are manufactured from premium extruded aluminum, are supplied<br />
with a grade 8.8 M12 bolt and self-locking nut, and fasten to existing or new ¼-<br />
turn omega brackets. All clamps and brackets come with TÜV and SWL markings.<br />
HALf-COUpLER CLAMpS<br />
<strong>Martin</strong> half-coupler clamps fit 48 to 51 mm (1⅞- 2 inch) diameter trusses and<br />
provide a large contact area for excellent grip. <strong>Martin</strong> half-couplers mount fixtures<br />
close to the truss and cause minimal truss wear and tear. An M12 bolt for fastening<br />
to omega brackets is included.<br />
G-CLAMpS<br />
<strong>Martin</strong> G-clamps fit 40 - 51 mm (1½ - 2 inch) diameter trusses and their ribbed<br />
aluminum clamping surfaces give better grip than steel. The wide, spring-loaded<br />
clamp plate tightens securely without scratching. <strong>Martin</strong> G-clamps are low-cost<br />
and include an M12 bolt.<br />
QUICK TRIGGER CLAMp<br />
Compact and mounted in a couple of seconds, the <strong>Martin</strong> quick trigger clamp<br />
can be used with 38.1 - 51 mm (1½ - 2 inch) diameter trusses. The clamp has<br />
spring-loaded jaws, a large, easy-grip T-handle for rapid leveraged tightening and<br />
an M12 bolt.<br />
OMEGA BRACKET<br />
The standard <strong>Martin</strong> omega bracket with ¼-turn fasteners gives a fast, secure<br />
attachment point for rigging clamps on <strong>Martin</strong> fixtures.<br />
T-SHApED OMEGA BRACKET<br />
The <strong>Martin</strong> T-shaped omega bracket is a flexible system for attaching fixtures to<br />
trusses with different dimensions. Adjustable clamp spacing allows the ¼- turn<br />
omega brackets to be used with all MAC fixtures (except the MAC 101) in all<br />
common truss designs.<br />
SUpER TRUSS BRACKET<br />
The Super Truss bracket can be used to hang MAC products* on a truss with 20.5”<br />
(52 cm) spacing between front and back bars. This allows fixtures to be hung<br />
closer together while keeping them centered on the truss. The bracket comes<br />
complete with half-couplers.<br />
SwING wING MOUNTING pLATE<br />
The Swing Wing bracket can be used to hang MAC products* in Tomcat Global’s<br />
Swing Wing truss. It gives greater clearance between the fixture and the floor<br />
during transit by hanging the fixture close to the mounting bar. It comes complete<br />
with half-couplers.<br />
*) MAC III Series, MAC 2000 Series, MAC 700 Series, MAC 575 Krypton, MAC TW1<br />
ORDERING INfORMATION<br />
Half-coupler clamp P/N 91602005<br />
G-clamp: P/N 91602003<br />
Quick trigger clamp: P/N 91602007<br />
Standard omega bracket with ¼ -turn fasteners: P/N 91602001<br />
T-shaped omega bracket with ¼ turn fasteners: P/N 91602008<br />
Swing wing mounting plate with half-couplers: P/N 91602010<br />
Super Truss 20,5’’ mounting plate with half-couplers P/N 91602014<br />
ACCESSORIES<br />
263
Change language