You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Kemppi PMT, MMT and WeldSnake series represent ultimate userfriendliness<br />
Excellent gas protection reduces porosity<br />
• gas diffuser of gun neck minimises turbulence in shielding gas flow<br />
• optimal design of gas nozzle tip prevents air from mixing with the<br />
shield gas<br />
• separate gas hose in water-cooled guns<br />
Reliable wire feed<br />
• supports prevent sharp bends<br />
• stiff, low-friction wire liners prevent undulated bends in the filler wire<br />
• low contact tip temperatures<br />
Firm hold of the handle, no strain on welder’s wrist<br />
• sticky, roughened handle surface<br />
• ergonomic design reduces press force<br />
• ball joint allows unrestricted bending of handle<br />
• neck of gas cooled guns twists 360 degrees<br />
Effortless gas nozzle maintenance<br />
• easy conical and roughened surface makes the maintenance of gas<br />
nozzle easy<br />
• stainless steel surface will not be damaged like conventional brass gas<br />
nozzles.<br />
Protected from overheating (PMT 30W, 42W, 52W)<br />
• wire feeding stops if cooling liquid is not circulating<br />
Gun regulator as accessory (RMT 10)<br />
• fast regulation of welding current<br />
• suitable for all PMT models<br />
Durability<br />
• protective hose material endures hard wear and heat<br />
• Mechanical shock and spatter resistant handle and trigger<br />
Small amount of consumable parts<br />
• the same consumable parts in PMT 27, 32 and 30W<br />
• the same wire liners and contact tips can be used in all PMT guns<br />
<strong>2004</strong> Kemppi Product Catalogue<br />
55
Change language