English 2004 PRODUCT CATALOGUE

Gun Holders Model Order number
GH 10 The holders are primarily meant to be mounted on the welding machines, but also 6256010
GH 20 on transport units or on welding tables, to all Kemppi MIG / TIG welding machines 6256020
GH 30 6256030
Alu Kit
Order number
for 1.0 mm wire 4 feed rolls with V-or trapezoid grooves, Alu Kit is a KIT by which the user can 4301820
for 1.2 mm wire ball bearings, press spring, press divider, improve wire feeding in Al-welding if 4301830
for 1.6 mm wire spring bushing, necessary accessories you have an old Kemppi feeder: Promig, 4301840
Wire, Feed or Kempomat (3200/4000)
Cable connectors Current durability A Cable mm² Order number, male
Order number,
female
200 10…25 9771650 9771626
250 35 9771671 9771628
315 50 9771670 9771627
400 70 9771680 9771629
500 95 - 9771630
600 95 9771681 -
BRANCH CONNECTORS 70/90 1 male, 2 female 9771637
Contact plugs Connecting machines to the mains supply Order number
Contact plug 16 A, 5 poles, 380 V 9770812
Contact plug 32 A, 5 poles, 380 V 9770813
Contact plug 64 A, 5 poles, 380 V 9770814
Gas guard
Order number
GG 400, is an accessory to be used with wire feeders to control the gas flow and to 6237405
guard the gas, gas flow regulation range 5-25 l/min, if there is no sufficient gas pressure
GG 400 will stop the welding
Connection cables
number of conductors,
cross-section and type mm²
Outer diameter
max. mm
Nominal voltage
max. Uo/U V
Order number
4 X 1.5 mm² 11.0 300/500 9722122
4 X 2.5 mm² 13.0 300/500 9722138
4 X 6 mm² 19.5 450/750 9722142
The nominal voltage Uo/U, has been marked to the cable charts where Uo = the highest allowed voltage between conductor and earth, and U = the highest allowed voltage between conductor.
2004 Kemppi Product Catalogue
75