LS-135 & LS-150 Operator Manual - Welch Allyn
LS-135 & LS-150 Operator Manual - Welch Allyn
LS-135 & LS-150 Operator Manual - Welch Allyn
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
When ordering replacement parts for your Caster Base Accessory, please use the following numbers:<br />
440094 Caster with brake<br />
Caster Base Frame<br />
Washers<br />
OR<br />
440095 Caster without brake<br />
No. 440094 Caster with brake, Acorn Nut and two Washers<br />
No. 440095 Caster without brake, Acorn Nut and two Washers<br />
TABLE CLAMP ACCESSORY ASSEMBLY<br />
1. Securely tighten the clamp (A) to the chosen mounting surface.<br />
2. Align the holes in the mounting bracket (B) on the light with the holes in the table clamp.<br />
Using the wrench provided, install the four screws provided and tighten.<br />
SPECIFICATION<br />
Leakage Current: The products listed within this manual comply<br />
with the agency requirements listed below.<br />
Approximate Physical Dimensions<br />
9.5 cm<br />
(3.75”)<br />
Environment:<br />
Transport/Storage:<br />
Operating:<br />
-20°C - 49°C, 10°C - 35°C<br />
10% - 95% R.H. Max, 30% - 75% R.H. Max,<br />
500hPa - 1060hPa Altitude<br />
500hPa - 1060hPa Altitude<br />
86 cm<br />
(34”)<br />
23 cm<br />
(9”)<br />
12°<br />
Class I Equipment<br />
Continuous Operation<br />
63 cm<br />
(25”)<br />
C<br />
US<br />
ETL listed:<br />
UL2601-1,<br />
CSA C22.2 No. 601.1,<br />
IEC 60601-1, AS 3200.1.<br />
IEC 60601-1-2<br />
89 cm<br />
(35”)<br />
N344<br />
Australia EMC Framework Compliance<br />
Ø 36 cm<br />
(Ø14”)<br />
8 443191FAX
Change language