Download - Fuji Xerox Printers

2.3 About the Ground Fault Interrupter
The printer has a ground fault interrupter on its rear left side.
In the event of leakage current, the ground fault interrupter will automatically cut off the
power circuit to prevent leakage current, a short, or a fire from occurring.
If the interrupter trips (if the button pops up), check and correct as necessary the
insulation condition of the electrical system of the printer and then press the
button.
If the insulation condition of the printer is not corrected, the interrupter trips again
immediately. In such a case, contact our Customer Support Center or your dealer.
button
button
Once a month, turn off the printer and test if the interrupter is functioning normally. Using a
failed interrupter can cause electric shock.
If your interrupter is not functioning normally, contact our Customer Support Center or your
dealers.
Refer to
• For information on how to test the ground fault interrupter, refer to P. 15.
40 2 Basic Operation