LOCKING LINE catalogue - Kendrion Binder
LOCKING LINE catalogue - Kendrion Binder
LOCKING LINE catalogue - Kendrion Binder
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
assessories<br />
GD209<br />
RSG 6 WSK 6<br />
Plug-in connector to DIN EN 175301-803<br />
Round connector to DIN 43651<br />
Round connector to DIN 45322<br />
Material No: 314 1046<br />
Material No: 314 1048<br />
small form E<br />
large form A<br />
Material No: 314 1053<br />
Material No: 314 1054<br />
22 AF<br />
small<br />
large<br />
Plug-in connectors are detachable connections and<br />
are used for connecting the locking units of the LLV...<br />
series.<br />
The cable outlet can be rotated through 4 x 90°<br />
(GD209 through 180°) by inserting the contact<br />
carrier accordingly. After plugging the connector into<br />
the device connector it is secured with a machine<br />
screw (supplied). This guarantees an effective seal<br />
between the two and prevents the plug-in connector<br />
from becoming accidentally detached. A screwed<br />
cable gland, thread size Pg 11 (GD209: Pg 9),<br />
serves to seal the cable entry. The contact elements<br />
are fitted with screw terminals and are suitable for<br />
connecting wire cross-sections up to max. 1.5 mm 2 .<br />
When plugged in and secured, the connection meets<br />
the requirements of class of protection IP 66 to IEC<br />
60529. The permissible continuous maximum<br />
temperature is 90°C; the connection can withstand<br />
temperatures of up to 120°C briefly without<br />
suffering any damage. When using the GDSB 211<br />
plug-in connector with integral rectifier, the plug-in<br />
connector can be used as a direct connecting element<br />
between an AC mains system and a DC consumer.<br />
Four silicon diodes form a bridge circuit. A varistor<br />
connected in parallel on the AC side protects the<br />
bridge rectifier against voltage spikes from the<br />
mains.<br />
Round connectors to DIN 43651 are used for<br />
connecting the locking units of the LLV... series. The<br />
connector is a 6-pole version complete with an<br />
earthing connection. After plugging the connector into<br />
the device connector it is secured with a machine<br />
screw (supplied). This guarantees an effective seal<br />
between the two and prevents the connector from<br />
becoming accidentally detached. A screwed cable<br />
gland, thread size Pg 11, serves to seal the cable<br />
entry. The wires are attached by crimping (max. wire<br />
cross-section 1.5 mm 2 ). When plugged in and<br />
secured, the connection meets the requirements of<br />
class of protection IP 65 to IEC 60529. The permissible<br />
continuous maximum temperature is 90°C; the connection<br />
can withstand temperatures of up to 120°C<br />
briefly without suffering any damage.<br />
Round connectors with a screw fixing are used for<br />
connecting the locking units of the LLV040002 series.<br />
This connector is supplied as a 6-pole version. The<br />
mechanical fixing of the round connector to the<br />
corresponding plug, and the earthing connection, is<br />
achieved by means of the metal union nut. A flexible<br />
grommet guarantees no kinks in the outgoing<br />
connecting cable. The wires are connected by<br />
soldering (max. wire cross-section 0.75 mm 2 ). When<br />
plugged in and secured, the connection meets the<br />
requirements of class of protection IP 40 to IEC<br />
60529. The permissible continuous maximum<br />
temperature is 90°C; the connection can withstand<br />
temperatures of up to 120°C briefly without suffering<br />
any damage. The cable outlet can be turned through<br />
180° by installing the contact carrier accordingly.<br />
14<br />
www.kendrionmt.com
Change language