Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
1980/89<br />
GENERAL<br />
LIGHT TRUCK INFORMATION 11<br />
MODEL YEAR APPLICATION<br />
Model year application is indicated by showing the first year followed by a diagonal line to indicate continued usage in all subsequent<br />
years until the insertion of the last year of usage, which will then be shown after the diagonal line. If no diagonal line is shown, the part<br />
is applicable only to the year shown.<br />
Example:<br />
80<br />
80/<br />
80/81<br />
Indicates part used 1980 model year only.<br />
Indicates part used 1980 through subsequent model years.<br />
Indicates part used 1980 through 1981 model years.<br />
MODEL CODES<br />
Truck models are listed throughout this catalog by truck series. A listing of model codes shown on certification label is included in this<br />
section on pages 22 thru 2S.<br />
Refer to these pages to determine the series listed in the text of the catalog.<br />
Example:<br />
Fl00/3S0 means Fl00 thru F3S0 or Fl00, F1S0, F2S0 and F3S0.<br />
SOFT TRIM<br />
Soft Trim parts are arranged in separate sections by car line catalog code within each model year, i.e. 1980 Soft Trim Section A (Ford<br />
or Mercury). To determine the <strong>com</strong>plete part number of a trim part, it is necessary to know the "Trim Code" which is shown on the<br />
Certification Label of the vehicle (refer to pages 22 thru 3S). Instructions for selecting soft trim parts are contained at the beginning of<br />
the Soft Trim area of this catalog.<br />
ATTACHING PARTS (NUTS, BOLTS, ETC.) and LOCATOR CODES<br />
Standard and utility hardware, such as bolts, screws, fittings, etc. are listed below the part with which they are used. To facilitate the<br />
stocking and handling of standard and utility parts by Ford or L-M Dealers, locator codes are preassigned by Ford Motor Company.<br />
The locator codes are shown in parentheses immediately following or below the standard and utility part numbers. For example, refer<br />
to Body Section 200 group 22800-1. The part number for a S/18" -18 x 1 1/8" screw-hex. head is 382623-S2 with the locator code<br />
(UU-S2-AL) appearing at the beginning of the description column. In some charts, such as the Carburetor Parts List Charts in Section<br />
9S.1, 9S.2, etc. the locator code will be shown next to or below the part number in the part number column.<br />
LIQUID MEASURE<br />
Most liquid measures listed in this catalog are in U.S. sizes and certain other liquid measure (unique to Canada) listed in this catalog<br />
are in Canadian sizes. The follow chart provides an understanding and a translation of U.S. to Canadian and Canadian to U.S. sizes.<br />
1/2 Pint Pint Quart Gallon<br />
(CAPACITY IN OUNCES)<br />
(CAPACITY IN OUNCES)<br />
Canada<br />
U.S.<br />
10<br />
8<br />
20<br />
16<br />
40<br />
32<br />
160<br />
128<br />
Example. S U.S. quarts (160 ounces) equal 4 Canadian quarts (160 ounces) or 1 Canadian gallon.<br />
March,1994<br />
COPYRIGHT © 1994 - FORD MOTOR - DEARBORN. MICHIGAN<br />
COMPANY<br />
Final Issue