You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Material Safety Data Sheet<br />
<strong>Zep</strong> Inc.<br />
1310 Seaboard Industrial Blvd.<br />
Atlanta, GA 30318<br />
1-877-793-7776<br />
Section 1. Chemical Product and Company Identification<br />
Product name AEROSOL PAINT REMOVER<br />
Product use Aerosol Paint Remover<br />
Product code R182<br />
Date of issue 08/18/09 Supersedes<br />
Emergency Telephone Numbers<br />
For <strong>MSDS</strong> Information:<br />
Compliance Services 1-877-793-7776<br />
For Medical Emergency<br />
(877) 541-2016 Toll Free - All Calls Recorded<br />
Section 2. Hazards Identification<br />
Emergency overview<br />
DANGER ! POISON<br />
FLAMMABLE LIQUID AND VAPOR. Vapor may cause flash fire. Do<br />
not smoke. Shut off all ignition sources. MAY BE FATAL OR<br />
CAUSE BLINDNESS IF SWALLOWED. VAPOR HARMFUL.<br />
HARMFUL IF ABSORBED THROUGH SKIN. CAUSES EYE, SKIN<br />
AND RESPIRATORY TRACT IRRITATION. CONTENTS UNDER<br />
PRESSURE.<br />
For Transportation Emergency<br />
CHEMTREC: (800) 424-9300 - All Calls Recorded<br />
In the District of Columbia (202) 483-7616<br />
Prepared By<br />
Compliance Services<br />
1420 Seaboard Industrial Blvd.<br />
Atlanta, GA 30318<br />
*Hazard Determination System (HDS): Health, Flammability, Reactivity<br />
NOTE: <strong>MSDS</strong> data pertains to the product as delivered in the original shipping container(s). Risk of adverse effects are lessened by following all<br />
prescribed safety precautions, including the use of proper personal protective equipment.<br />
Acute Effects Routes of Entry Dermal contact. Inhalation. Ingestion.<br />
Eyes<br />
Skin<br />
Causes eye irritation. Inflammation of the eye is characterized by redness, watering and itching.<br />
Causes skin irritation. Skin inflammation is characterized by itching, scaling, reddening or,<br />
occasionally, blistering. Harmful if absorbed through the skin. Prolonged contact can cause<br />
severe irritation or even burns.<br />
Inhalation Material is irritating to mucous membranes and upper respiratory tract. Can cause central<br />
nervous system (CNS) depression. Symptoms and signs include headache, dizziness, fatigue,<br />
muscular weakness, drowsiness and, in extreme cases, loss of consciousness.<br />
Ingestion Toxic if swallowed. May be fatal or cause blindness if swallowed. Get immediate medical<br />
attention.<br />
Chronic effects<br />
Carcinogenicity<br />
3 2 0<br />
Repeated or prolonged exposure to the substance can produce damage to central nervous system,<br />
peripheral nervous system, heart, kidneys, liver, blood. Prolonged skin contact may cause<br />
dermatitis with drying and cracking of skin.<br />
Contains material which can cause cancer. Risk of cancer depends on duration and level of<br />
exposure.<br />
Product/ingredient name<br />
ACGIH IARC EPA NIOSH NTP OSHA<br />
Methylene Chloride A2 2B - - Possible +<br />
Section 3. Composition/Information on Ingredients<br />
Additional Information: See Toxicological Information (Section 11)<br />
CAS number<br />
METHYLENE CHLORIDE; dichloromethane; methylene dichloride 75-09-2 60 - 70<br />
HYDROCARBON PROPELLANT; blend of propane & isobutane 75-28-5; 74-98-6 15 - 25<br />
METHANOL; methyl alcohol; wood alcohol; columbia spirits 67-56-1 5 - 15<br />
MONOISOPROPANOLAMINE; 1-amino-2-propanol 78-96-6 1 - 5<br />
Page: 1/4
Page: 2/4<br />
Product code R182<br />
Material Safety Data Sheet<br />
Product Name AEROSOL PAINT REMOVER<br />
Section 4. First Aid Measures<br />
Eye Contact Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. Check for and<br />
remove any contact lenses. Continue to rinse for at least 10 minutes. Get medical attention if irritation occurs.<br />
Skin Contact Immediately wash affected area with soap or mild detergent and water. Remove contaminated clothing and<br />
shoes. Continue to rinse for at least 10 minutes. Wash clothing before reuse. Get medical attention if irritation<br />
develops.<br />
Inhalation If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.<br />
Get medical attention immediately.<br />
Ingestion Toxic if swallowed. Do not induce vomiting unless directed to do so by medical personnel. If vomiting occurs,<br />
the head should be kept low so that vomit does not enter the lungs. Never give anything by mouth to an<br />
unconscious person. Get medical attention immediately.<br />
Section 5. Fire Fighting Measures<br />
Flash Point<br />
Flammable Limits<br />
Flammability<br />
Fire hazard<br />
Fire-Fighting<br />
Procedures<br />
Not available.<br />
Not available.<br />
Flammable aerosol (CSMA)<br />
National Fire Protection Association (U.S.A.)<br />
3 2 0<br />
CONTENTS UNDER PRESSURE. Container explosion may occur under fire conditions or<br />
when heated. Vapors may accumulate in low or confined areas or travel a considerable distance<br />
to a source of ignition and flash back.<br />
Use dry chemical or CO2. Cool closed containers exposed to fire with water. Wear special<br />
protective clothing and positive pressure, self-contained breathing apparatus.<br />
Section 6. Accidental Release Measures<br />
Spill Clean up<br />
Large spills are unlikely due to packaging.<br />
Section 7. Handling and Storage<br />
Handling<br />
Storage<br />
Put on appropriate personal protective equipment (see section 8). Do not get in eyes, on skin or on clothing. Do not<br />
breathe vapor or mist. Use only with adequate ventilation. Watch for accumulation in low confined areas.<br />
Store away from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials (see section<br />
10) and food and drink. Do not store above the following temperature: 49°C (120.2°F). Do not puncture or incinerate<br />
container. Keep out of the reach of children.<br />
Section 8. Exposure Controls/Personal Protection<br />
Product name<br />
METHYLENE CHLORIDE; dichloromethane; methylene<br />
dichloride<br />
HYDROCARBON PROPELLANT; blend of propane & isobutane<br />
METHANOL; methyl alcohol; wood alcohol; columbia spirits<br />
Personal Protective Equipment (PPE)<br />
Eyes<br />
Body<br />
Respiratory<br />
Exposure limits<br />
OSHA PEL (United States).<br />
TWA: 25 ppm 8 hour(s).<br />
OSHA (United States).<br />
STEL: 125 ppm 15 minute(s).<br />
ACGIH TLV (United States).<br />
TWA: 50 ppm 8 hour(s).<br />
ACGIH TLV / OSHA PEL (United States). Notes: Propane<br />
TWA: 1000 ppm 8 hour(s).<br />
OSHA/ACGIH (United States).<br />
TWA: 200 ppm 8 hour(s).<br />
OSHA /ACGIH (United States).<br />
STEL: 250 ppm 15 minute(s).<br />
Safety glasses.<br />
Chemical-resistant gloves: Viton. Synthetic apron.<br />
Use with adequate ventilation. Provide exhaust ventilation or other engineering<br />
controls to keep the airborne concentrations of vapors below their respective<br />
occupational exposure limits. Use a properly fitted, air-purifying or air-fed<br />
respirator complying with an approved standard if a risk assessment indicates this<br />
is necessary.
Page: 3/4<br />
Product code R182<br />
Material Safety Data Sheet<br />
Product Name AEROSOL PAINT REMOVER<br />
Section 9. Physical and Chemical Properties<br />
Physical State<br />
pH<br />
Boiling Point<br />
Specific Gravity<br />
Solubility<br />
Liquid. (Aerosol.)<br />
Not applicable.<br />
~40°C (104°F)<br />
1.23<br />
Insoluble in the following materials: cold water and<br />
hot water.<br />
Color Translucent. Amber.<br />
Odor Solvent.<br />
Vapor Pressure Not available.<br />
Vapor Density Not available.<br />
Evaporation Rate
Product code R182<br />
Material Safety Data Sheet<br />
Product Name AEROSOL PAINT REMOVER<br />
State Regulations<br />
California Prop 65<br />
WARNING: This product contains a chemical or chemicals known to the state<br />
of California to cause cancer, birth defects or other reproductive harm.:<br />
Methylene chloride; Propylene oxide; Ethylbenzene; Toluene<br />
Section 16. Other Information<br />
To the best of our knowledge, the information contained herein is accurate. However, neither the above named supplier nor any of its subsidiaries assumes any<br />
liability whatsoever for the accuracy or completeness of the information contained herein.<br />
Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with caution.<br />
Although certain hazards are described herein, we cannot guarantee that these are the only hazards that exist.<br />
*NOTE: Hazard Determination System (HDS) ratings are based on a 0-4 rating scale, with 0 representing minimal hazards or risks, and 4 representing significant hazards or risks<br />
Although these ratings are not required on <strong>MSDS</strong>s under 29 CFR 1910.1200, the preparer may choose to provide them. HDS ratings are to be used with a fully implemented program to<br />
relay the meanings of this scale.