Hornady 2006 Catalog - Peter Hofer Jagdwaffen

RELOADING
L-N-L Powder Measures
1-800-338-3220
Hornady’s Lock-N-Load Powder Measure lets you
change powders and settings with the push of a button.
The Lock-N-Load Powder Measure offers the most flexible operation and the widest range of any
measure on the market today. Not only can you switch powders and settings with a single button
push, but add the proper accessories and the Lock-N-Load Powder Measure lets you meter charges
from .5 to 265 grains of powder!
F E A T U R E S
1) LARGEST CHARGE RANGE IN
3) PRECISION TOLERANCE
THE INDUSTRY
At only .002" clearance between the drum and rotor, it’s
Go from .5 grains to 265 grains with the different
inserts. Ours is the only measure designed to let
you swap measuring inserts. Use one Lock-N-Load
Powder Measure for reloading everything from small
pistol cartridges to .50 BMG and large magnum rifle
cartridges.
2) PUSH BUTTON RELEASE FUNCTION
To change metering inserts, just push the Lock-N-
Load insert release button and insert another meter.
Simply verify the new charge and you’re reloading
the tightest in the industry for a standard measure. It’s
your assurance of premium quality. Eliminates powder
binding between the frame and drum.
4) MULTIPLE MOUNTING METHODS
Mount to your bench using standard 7/8"-14 thread or
use our Lock-N-Load Bushings to mount this versatile
measure on the Fast Load Powder Measure Stand
or on the Lock-N-Load AP for automatic powder
measuring during reloading. (Lock-N-Load Bushings
sold separately on page 53).
2
3
again right away. Lets you swap preset inserts in
seconds. Go from reloading 30-06 to 45 Auto in no
time. Keep the preset insert with your die set.
5) ADJUSTABLE TENSION
The O-ring lets you put a slight amount of tension
on the metering unit to make fine, incremental
adjustments. Once you’ve set your charge, the lock ring
will secure it.
4
1
2
6) SMALL AND LARGER DROP TUBES
These tubes speed up powder flow. Two drop tubes are
provided standard for 22 to 45 caliber loads. Use the
largest drop tube that fits the case mouth. An optional
No. 050069
$76.08
5
Just push the button and remove the
metering insert.
extended drop tube is also available. (See page 56).
.17 cal. Powder Sleeve No. 392703 $6.23
6
Pistol Reloading
Powder Measure Metering Inserts
Switch these metering units in and out of your Lock-N-Load
Powder Measure with just a push of a button. (Not compatible
with the Bench Rest Grade or Black Powder Measure.)
Bushing Adapter No. 050122 $10.35
RELOADING
Pistol Rotor and Standard Metering Insert
For use in your L-N-L Powder Measure, this pistol rotor
features a smaller chamber for more precise metering.
No. 050128 $31.95
Micrometer Pistol Insert
For extremely precise measurements, the Micrometer
Pistol Insert allows you to dispense one grain at a time.
No. 050129 $31.17
Standard
Metering Unit
(1 included with
Lock-N-Load measure)
No. 050120 $8.95
Rifle Micrometer
Metering Insert
No. 050124 $31.15
Drain Tube Insert
A Hornady Exclusive!
Swaps with metering
inserts so you can
drain powder without
removing the measure
from its stand.
(Compatible with Bench
Rest Grade Powder
Measure.)
No. 050125 $11.65
59
Lock-N-Load, L-N-L, and Lock-N-Load AP are trademarks of Hornady Manufacturing Co.