Hornady 2006 Catalog - Peter Hofer Jagdwaffen

www.hornady.com
RELOADING
L-N-L Powder Measures
Blackpowder Lock-N-Load
Powder Measure
Bench Rest Grade
Lock-N-Load Powder Measure
1
Hornady’s all-metal Blackpowder Powder
Measure features a non-sparking aluminum
hopper and brass metering unit. It’s designed
specifically to meet the safety needs of
handloaders working with blackpowder.
Features include:
1) ALUMINUM HOPPER TUBE AND CAP
The aluminum hopper won’t develop a static charge,
unlike plastic hopper units. When working with black
powder, it’s critical to avoid static electricity and any
kind of sparking.
Hornady’s Bench Rest Powder Measure
gives you all the advantages of Lock-N-
Load technology with the added
benefit of more precise measuring. That
precision comes from a specially
designed metering insert and a smaller
metering chamber to promote more
consistent and uniform filling.
The micrometer adjustment gives posi-
2
2) EXTREMELY TIGHT TOLERANCES
BETWEEN DRUM AND ROTOR
The near 2000th of an inch tolerance eliminates
binding of powder between the frame and drum for
smoother operation with coarse black powder.
3) BRASS METERING UNIT
The all brass metering unit is graduated in common
black powder volumes.
tive reference for metering adjustments
and you can install pre-set metering
units by simply pushing the button on
the outside of the metering chamber.
All moving parts have been plated for
protection and long life, and the rotor
requires NO lubrication.
3
No. 050110
$133.27
No. 050130 $139.00
Fast Load Powder Measure Stand
1
2
The incredibly strong Fast-Load
Powder Measure Stand has a rigid
frame and extra long arm that lets
you fill an entire 50-count Universal
Loading Block. Accepts any measure
with 7/8"-14 thread.
No. 050008 $33.25
1) LOCK-N-LOAD BUSHINGS:
If you have more than one powder
measure, you can switch them in and
out of the Fast-Load stand in just
seconds, using Lock-N-Load bushings.
2) LONG REACH:
Lets you bench-mount the powder
measure and still drop powder in the
loading block.
Universal Loading Block
This double side block helps you load
quantities of nearly any caliber
you choose. Fits magnum,
308 and 223 size case heads.
Also works with Fast-Load
Powder Measure Stand to reach
every case in the block.
No. 480040 $4.28
Extended Drop Tube
Lets you put more powder in the case. We discovered it’s
not only the long tube but also the orifice that makes
the difference, so it fills the case slower. Use the
smallest orifice the powder will flow through
for best results. No. 390699 $39.95
Black Powder PM Extended Drop Tube
No. 490070 $24.95
RELOADING
Lock-N-Load and L-N-L are a trademarks of Hornady Manufacturing Co.
60