Hornady 2006 Catalog - Peter Hofer Jagdwaffen

www.hornady.com
RELOADING TOOLS
Cam-Lock TM Trimmer
Hornady’s Cam-Lock Trimmer
No other case trimmer in this price range features a micro-adjustable
cutting head! Based on the proven design of our earlier case trimmer, this
new model is packed with many features that Hornady customers have
been asking for. Note: Shell holders not included.
No. 050140 $84.27
3
1
4 5
Cam-Lock Power
Trimmer Adapter
The power adapter for your Cam-Lock
Trimmer allows you to use a batteryoperated
screwdriver or drill instead of
muscle power to drive your trimming.
The adapter replaces the hand crank for
easy operation. No. 050145 $27.72
2
6
See a complete
listing of Shell
Holders on page 54.
F E A T U R E S
1) GET ACCURATE, CONSISTENT
4) LARGE DIAMETER, REPLACEABLE
Trimmer Pilots ($3.87 each*)
CASE LENGTHS
CUTTING HEAD
Thanks to the unique way the case is locked in place
in the shell holder, all trim lengths are accurately
measured from the base of the cartridge, with no
variation due to rim thickness, etc. You get the same
trim length every time.
New, larger cutter trims cases up to .50 caliber in
diameter. Made of ultra-hard, super-sharpened
tool steel that keeps its edge practically forever.
Easily removable for resharpening or replacement.
5) UNIQUE MICROMETER
Item No. Pilot No.
Bullet
Dia. Item No. Pilot No.
Bullet
Dia.
390940 22 - 20 cal. .204 390954 12 .328
390943 1 - 22 cal. .224 390955 13 .333
390944 2 .228 390956 14 .348
2) USES STANDARD HORNADY SHELL
HOLDERS & PILOTS
Uses Hornady’s standard shell holder and the same
pilots as our previous case trimmer (includes the
seven most popular pilots – .22 cal., 6mm, .270 cal.,
7mm, .30 cal., .38 cal., .45 cal.).
ADJUSTABLE CUTTER
The micrometer lets you change settings from
longer to shorter in increments of 1/1000" without
ever moving the case. This is an extra cost
with other trimmers but is included with ours.
6) TALLER FRAME AND
390945 3 - 6MM .243 390957 15 - 38 cal. .358
390946 4 - 25 cal. .257 390962 20 .361
390947 5 - 6.5MM .264 390958 16 - 375 cal. .375
390948 6 - 270 cal. .277 390941 21 - 40 cal. .400
390949 7 - 7MM .284 390959 17 - 41 cal. .410
3) UNIQUE ONE FINGER CASE CAM LOCK
REDESIGNED HANDLE
390950 8 .300 390960 18 - 44 cal. .429
Just a light touch of the knob locks the case in
place, rock solid. Just a touch releases it. No need to
crank the locking knob. Holds the case square with
the cutter for precision trimming.
Cam-Lock Chamfer/ Deburr Tools:
Mounts in place of the cutter to speed the
chamfering and deburring process. It also
keeps chamfers and deburrs square
with the case mouth.
No. 050147
$33.15
The redesigned handle fits your palm, and the taller
frame means you won’t bang your knuckles on
your bench when trimming. More ergonomic for
faster trimming.
Dust Cover
Helps keep your trimmer clean between uses.
No. 100016 $19.95
390951 9 - 30 cal. .308 390961 19 - 45 cal. .452
390952 10 - 303 cal. .312 390939* 23 - 480/475 .475
390953 11 - 8MM .323 390937* 50 - 50 cal. .500
17 cal. Pilot/Cutter
No. 390942
$20.40 each
Extra Cutter
No. 390972
$16.64 each
*PIlot No. 23 and Pilot No. 50 are $6.00 a piece.
Premium Extra Cutter
No. 390976
$28.28 each
RELOADING
Cam-Lock is a trademark of Hornady Manufacturing Co.
62