Planning Documents for Hybrid OR

More documents

Recommendations

Info

PLANNING DOCUMENTS FOR HYBRID OR | DRÄGER PORTFOLIO | 19 D-35818-2011 D-57963-2012 D-57972-2012 Dräger portfolio Front view 3-fold Front view 60 inch Front view 8-fold D-35825-2011 D-57962-2012 Back view 3-fold Back view 60 inch D-450-2014 D-57973-2012 Back view 8-fold VARIANTS – 4 arm lengths: 1750 mm-2500 mm – 7 display frames – 2-8 displays optimized for 19"; 21" displays can be also mounted – 60" large display Advice: If there is an Hybrid OR with an Angiography System from Philips a large screen (FlexVision) must be used which need its own display frame! FlexVision TECHNICAL DATA Product Pendula Display holder at CSU Display arm at central axis Description Multi display holder Swivel and lift arms mounted on CSU Display arm at central axis Display sizes 19" up to 60" approx. 26" (VESA 100 adaptor), approx. 24" (larger displays max. 15 kg on request) Display quantity 1 (60") up to 8 (21") depending on column size 1 (19 to 32”) or 2 (19 to 24”) Fixation analogue to CSU fixation at CSU – Media column at central axis of OR light or separate
20 | PLANNING DOCUMENTS FOR HYBRID OR | DRÄGER PORTFOLIO Ceiling fixtures Ceiling fixtures for supply units PRODUCT DESCRIPTION The universal Dräger ceiling mount supports the installation of Agila, Motiva and Forta supply units as well as the Pendula. They are designed for either anchor (fig. B + D) or boltthrough (fig. A + C) mounting. The ceiling supply can be directly attached to a concrete ceiling (direct mounting, see A1 and B1 in figure below). A variable fixture kit enables mounting up to 1200 mm under the concrete ceiling in order to bridge the space between it and a false ceiling. A media flange, located between the raw and false ceilings, offers enough space for connecting supply voltage, medical gas, vacuum and data cables. The installation manuals are included in the delivery. PLANNING GUIDELINES Dräger ceiling supply units are validated and certified for use with these ceiling fixtures. This certification is invalidated if non-Dräger ceiling mounting systems are used. The ceiling mount must meet the following criteria: – 12.500 Nm of torque at the lower end of the fixture – 9.000 N tensile force at the ceiling If the building design is not compatible with a Dräger ceiling mount, a custom design can be substituted. Certification of the two conditions stated above is mandatory. The performance specifications of a Dräger ceiling supply unit cannot be guaranteed if a mounting design is used which does not meet the required criteria listed above. In such cases, any given approvals are automatically invalidated. Available for: – Anchor mounting: Anchor mounting is possible if the ceiling is constructed with at least 250 mm of B 25 concrete – Bolt-through mounting: Bolt-through mounting is required if the ceiling thickness is less than 250 mm or the concrete quality is less than B 25. Without ceiling fixture set With ceiling fixture set A C Nm max. 1200 mm Bolt-through mounting N B D Anchor mounting TECHNICAL DATA Product Span intermediate ceiling distance Max. torque Max. tensile force at the ceiling Hole pattern Ceiling fixtures up to 1.200 mm 12.500 Nm 9.000 N Ø 470 mm
Page 1 and 2: D-441-2014 ST-8934-2008 D-35487-201
Page 3 and 4: 4 | PLANNING DOCUMENTS FOR HYBRID O
Page 9 and 10: 10 | PLANNING DOCUMENTS FOR HYBRID
Page 17: 18 | PLANNING DOCUMENTS FOR HYBRID
Page 69 and 70:
70 | PLANNING DOCUMENTS FOR HYBRID
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89:
CORPORATE HEADQUARTERS Drägerwerk
show all

Planning Documents for Hybrid OR

Create successful ePaper yourself

Delete template?

Save as template?