Planning Documents for Hybrid OR

D-441-2014 

ST-8934-2008 

D-35487-2011 

Planning Documents 

for Hybrid OR

PLANNING DOCUMENTS FOR HYBRID OR | PREAMBLE | 3 

Preamble 

This Planning Document was developed to enhance your knowledge of the 

Dräger portfolio and to provide guidance when designing a new Hybrid OR. 

This document contains an overview of Dräger products and their corresponding 

technical data. 

The last pages of this document show several exemplary Dräger solutions, 

including detailed technical drawings of the individual workplaces.

4 | 

PLANNING DOCUMENTS FOR HYBRID OR | 

INDEX OF CONTENTS 


OVERVIEW 

Hybrid OR – The concept of Hybrid OR 6 

Dräger – Workplace infrastructure 7 

DRÄGER PORTFOLIO 8 

Overview Supply units 10 

OR lights and video systems/Gas Management Systems 11 

Ceiling supply units for the OR 12 

OR and examination lights 14 

Central axis system dedicated for Hybrid OR 16 

Display holder 18 

Ceiling fixtures 20 

Workstation components 23 

Gas Management Systems 26 

Overview anesthesia portfolio 28 

Accessories 30 

WORKPLACE EXAMPLES 32 

Supply units Anesthesia/Docking 34 

Surgical workplace 35 

Display holder/OR lights 36 

Anesthesia devices 37 

GENERAL PLANNING 38 

General Planning: Ceiling supply units, OR lights/Cameras/Displays, 40 

Ceiling mount 

Planning an anesthesia workplace 41 

Solution 1: Siemens – Artis zee floor arrangement – 42 

supply unit arrangement with OR lights and display boom 

Solution 2: Siemens – Artis zee ceiling arrangement – 44 


Solution 3: Siemens – Artis zee ceiling arrangement – 46 

supply unit MediaDocking arrangement with OR lights and display boom 

Solution 4: Siemens – Artis zeego 30° arrangement – 48 


Solution 5: Siemens – Artis zeego parallel arrangement – 50 

supply unit MediaDocking arrangement with OR lights and display boom

PLANNING DOCUMENTS FOR HYBRID OR | INDEX OF CONTENTS | 5 


GENERAL PLANNING 

Solution 6: Philips – Allura FD 20 ceiling arrangement – 52 

supply unit arrangement with OR lights and display booms 

Solution 7: Philips – Allura FD 20 FlexMove arrangement – 54 






CAD Drawing – Configuration 1, Movita - Radiation Protection 60 

CAD Drawing – Configuration 2, Movita - Pendula Cardiotechnology Type 61 

CAD Drawing – Configuration 3, Movita - Pendula - Radiation Protect 62 

CAD Drawing – Configuration 4, Polaris® 500/700 63 

CAD Drawing – Configuration 5, Movita - Cardiotechnology Type 64 

CAD Drawing – Configuration 6, Movita - Polaris® 500 - Radiation Protection 65 

CAD Drawing – Configuration 7, Pendula 60" - Polaris® 700 66 

CAD Drawing – Configuration 8, Movita - Forta Cardiotechnology Type 67 

CAD Drawing – Configuration 9, Polaris® 500 - Radiation Protection 68 

CAD Drawing – Configuration 10, Forta MD 69 

CAD Drawing – Configuration 11, Pendula 60" 70 

CAD Drawing – Configuration 12, Forta MD - Polaris® 500 - 71 

Radiation Protection 

CAD Drawing – Configuration 13, Movita - Forta Cardiotechnology Type 72 

CAD Drawing – Configuration 14, Radiation Protection 73 

CAD Drawing – Configuration 15, Pendula - Forta MD - Polaris® 700 74 

CAD Drawing – Configuration 16, Pendula - Forta MD - Polaris® 500 75 

CAD Drawing – Configuration 17, Movita 10 (Lift) 76 





CAD Drawing – Configuration 22, Polaris® 750 81 

CAD Drawing – Configuration 23, Pendula 60" 82 


CAD Drawing – Configuration 25, Agila 05 (Lift) - Polaris® 500 84 

CAD Drawing – Configuration 26, Movita 05 (Lift) - Movita AK (Lift) 85 

CAD Drawing – Configuration 27, Pendula 60" - Pendula 19" 86 

CAD Drawing – Configuration 28, Polaris® 500 87 

CONTACT 89

6 | 


OVERVIEW 

Hybrid OR 

The concept of Hybrid OR: 

“The fusion of surgery and imaging” 

OPERATING ROOM 

IMAGING 

SURGICAL WORKPLACE 

Equipment 

– OR lights and cameras 

– Video Management/OR-Integration 

– Displays 

– OR tables 

– Navigation 

– OR robots 

– Blood gas analysis device 

– ECMO 

– ECG device 

– HF surgical equipment 

– Minimal invasive surgery 

equipment 

– Suction unit 

– Ultrasound diagnosis/ 

echocardiography device 

– Equipment table 

– Defibrillator 

– Heart lung machine 

Hybrid OR 

CARDIO/ANGIO WORKPLACE 

Equipment 

– CT, special C-arm 

– Catheter trolley/tables 

– High-pressure injection needle 

– Pneumatic blood arrest 

ANESTHESIA WORKPLACE 

– Anesthesia device 

– Patient monitoring and IT 

– Infusion/syringe pumps

PLANNING DOCUMENTS FOR HYBRID OR | OVERVIEW | 7 

Dräger 

Workplace infrastructure 

Dräger offers solutions for the entire hospital 

D-30018-2011

8 | 


DRÄGER PORTFOLIO 

Dräger 

portfolio 

D-35628-2011

PLANNING DOCUMENTS FOR HYBRID OR | DRÄGER PORTFOLIO | 9 

Dräger portfolio 


An overview of the Dräger portfolio for the OR 

Planning a Hybrid OR requires a thorough understanding 

of the Dräger product portfolio. This 

chapter will help you familiarize yourself with 

Dräger products and devices which are relevant for 

the operating room, such as supply units, OR lights, 

ceiling fixtures, gas management systems and 

anesthesia devices. 

We encourage you to take a close look at the 

Dräger products discussed in this chapter in order 

to maximize your potential planning competency.

10 | 



Overview 

Supply units 

D-3289-2011 

Ponta 

D-148-2010 

MT-5960-2008 

MT-6342-2008 

Opera® 

Agila 

Movita 

D-18477-2010 

D-36069-2011 

D-27741-2009 

Forta 

Linea 

Gemina® Duo


OR lights and video systems 


MT-6323-2008 

D-58476-2012 

D-31307-2011 

D-21704-2010 

Video systems 

Polaris® 50 

Polaris® 100/200 

Polaris® 5xx/7xx 

Gas Management Systems 

D-9489-2009 

D-9270-2009 

Terminal Units 

EcoPharm Tower 

D-9368-2009 

MT-0001-2006 

D-58913-2012 

Medical Air Guard 

Gas Control Station 

Area Control Unit with VoluCount®

12 | 



Ceiling supply units for the OR 

D-52660-2012 

MT-6342-2008 

D-18460-2010 

Agila 

Movita 

Forta 

WHAT IS WHAT? 

Ceiling bearing 

Arm system 

Distance tube 

Lifting 

system 

Media head 

Media column 

D-18369-2010 

D-12307-2011 

Workstation 

components 

D-18551-2010


ARM SYSTEMS 

D-52660-2012 

D-52660-2012 

Single arm system 

Arm length: 500 mm, 750 mm, 1000 mm, 1250 mm 

Load capacity*: 120 kg - 270 kg 

Double arm system 

Arm length: min. 1000 mm - max. 2500 mm 



D-18369-2010 

Lift arm system 

Arm length: min. 1000 mm (lift arm) - max. 2500 mm 


*Load capacity = net load at media column/head 

strong 

medium 

light 

Arm types 

For single and double arm systems, you can choose between heavy-duty, 

medium and lightweight models. Load capacities are defined by the type 

of and length of arm. 

MT-5963-2008 

MT-6342-2008 

D-18468-2010 

Agila 

Movita 

Forta 

TECHNICAL DATA 

Product Agila Movita Forta 

Load capacity 

Media head 120 kg 120 kg – 

Column 120 kg 270 kg 270 kg 

Lift express/Lift 80 kg/120 kg 80 kg/180 kg – 

Lift speed 10/20 sec 10/20 sec 30 sec 

Height adjustment 600 mm 600 mm 600 mm 

Media outlets up to 51 up to 102 up to 32

14 | 



OR and examination lights 

LIGHTS AND VIDEO OPTIONS 

D-21696-2010 

Video systems 

D-31029-2011 

D-58477-2012 

D-448-2014 

Polaris® 5xx/7xx 

Polaris® 100/200 

Polaris® 50 


Product Polaris® 5xx/7xx Polaris® 100/200 Polaris® 50 

Technology LED LED LED 

Light intensity 110.000 or 160.000 Lux 120.000 or 160.000 Lux 60.000 Lux 

Endo-light mode 3.000 Lux 300 Lux no 

Light field diameter 220 to 290 mm 200 mm 160 mm 

Color temperature 4600 K 4400 K or 5000 K or 5600 K (option) 4500 K 

Video options integrated SD or HD camera, external SD camera external SD camera no


D-21698-2010 


CENTRAL AXIS MODELS 

Central axis system 

– For Polaris, camera and displays, 

central axes are available 

Swivel arms 

– You can choose from 1 up to 4-fold axis. 

Standard length: 700, 850, 1000, 1150 

and 1450 mm 

Arm system 

Swivel arm length (mm) 

1-fold central axis (ø 110 mm) 850 

1150 

1450 

AC 2000/3000 1-fold 750 

2-fold central axis 700/850 

3-fold central axis 700/850/1000 

4-fold central axis 700/850/1000/1150 

All central axes are freely configurable. Display holders, external cameras, X-Ray protection shields or OR lights can be mounted on each position. 

A display holder must be to be mounted at either the lowest or highest position.

16 | 



D-90850-2013 

D-442-2014 

Central axis system dedicated for Hybrid OR 

Several axes especially designed for use in Hybrid OR are available. 

You can choose between a 1 and 2-fold axis. Available lengths: 1300 to 2200 mm 

These axes are also useful if two mounting points are outside the LAF-field (left and right)


D-22405-2010 


Arm system 

Swivel arm length (mm) 

1-fold central axis 1300 

1400 

– 

2200 

2-fold central axis 1150/1300 

1300/1450 

– 

2050/2200 

SPRING ARMS 

Light heads and display holders are 

mounted on swivel arms using spring arms. 

Spring arm length: approx. 910 mm 

(OR lights)

18 | 



Display holder 

D-57969-2012 

D-90843-2013 

Pendula 

Display holder at CSU 

D-90844-2013 

D-069-2014 

Display holder at central axis (up to 24") 

Display holder at central axis (up to 32") 

PENDULA – CUSTOM SOLUTIONS FOR THE HYBRID OR 

FEATURES 

– Stationary ceiling mount 

– Spring arm adapted to Dräger arm 

– Freely suspended system that swings away 

(horizontally and vertically) in case of 

collisions 

– The swinging mount underneath the lift 

arm supports the automatic upright positioning 

of the system and protect the displays 

and other equipment in case of collisions 

– Integrated cable management 

– Flexible arrangement of the displays in 

number and size (2-8 displays (19"/21") or 

1 x 60" + backup screens)


D-35818-2011 

D-57963-2012 

D-57972-2012 


Front view 3-fold 

Front view 60 inch 

Front view 8-fold 

D-35825-2011 

D-57962-2012 

Back view 3-fold 

Back view 60 inch 

D-450-2014 

D-57973-2012 

Back view 8-fold 

VARIANTS 

– 4 arm lengths: 1750 mm-2500 mm 

– 7 display frames 

– 2-8 displays optimized for 19"; 

21" displays can be also mounted 

– 60" large display 

Advice: If there is an Hybrid OR with an 

Angiography System from Philips a large 

screen (FlexVision) must be used which 

need its own display frame! 

FlexVision 


Product Pendula Display holder at CSU Display arm at central axis 

Description Multi display holder Swivel and lift arms mounted on CSU Display arm at central axis 

Display sizes 19" up to 60" approx. 26" (VESA 100 adaptor), approx. 24" (larger displays 

max. 15 kg 

on request) 

Display quantity 1 (60") up to 8 (21") depending on column size 1 (19 to 32”) or 2 (19 to 24”) 

Fixation analogue to CSU fixation at CSU – Media column at central axis of OR light 

or separate

20 | 



Ceiling fixtures 

Ceiling fixtures for supply units 

PRODUCT DESCRIPTION 

The universal Dräger ceiling mount supports 

the installation of Agila, Motiva and Forta 

supply units as well as the Pendula. They are 

designed for either anchor (fig. B + D) or boltthrough 

(fig. A + C) mounting. The ceiling 

supply can be directly attached to a concrete 

ceiling (direct mounting, see A1 and B1 in 

figure below). 

A variable fixture kit enables mounting up to 

1200 mm under the concrete ceiling in order 

to bridge the space between it and a false 

ceiling. A media flange, located between the 

raw and false ceilings, offers enough space for 

connecting supply voltage, medical gas, vacuum 

and data cables. The installation manuals 

are included in the delivery. 

PLANNING GUIDELINES 

Dräger ceiling supply units are validated and 

certified for use with these ceiling fixtures. 

This certification is invalidated if non-Dräger 

ceiling mounting systems are used. 

The ceiling mount must meet the following 

criteria: 

– 12.500 Nm of torque at the lower end 

of the fixture 

– 9.000 N tensile force at the ceiling 

If the building design is not compatible with 

a Dräger ceiling mount, a custom design can 

be substituted. Certification of the two conditions 

stated above is mandatory. The performance 

specifications of a Dräger ceiling 

supply unit cannot be guaranteed if a mounting 

design is used which does not meet the 

required criteria listed above. In such cases, 

any given approvals are automatically invalidated. 

Available for: 

– Anchor mounting: Anchor mounting is 

possible if the ceiling is constructed 

with at least 250 mm of B 25 concrete 

– Bolt-through mounting: Bolt-through 

mounting is required if the ceiling 

thickness is less than 250 mm or the 

concrete quality is less than B 25. 

Without ceiling fixture set 

With ceiling fixture set 

A 

C 

Nm 

max. 1200 mm 

Bolt-through mounting 

N 

B 

D 

Anchor mounting 


Product 

Span intermediate ceiling distance 

Max. torque 

Max. tensile force at the ceiling 

Hole pattern 

Ceiling fixtures 

up to 1.200 mm 

12.500 Nm 

9.000 N 

Ø 470 mm


Ceiling hood/Flat cover 


TYPES OF CEILING COVERS 

D-90841-2013 

D-90845-2013 

D-90848-2013 

D-90849-2013 

D-90846-2013 

Ceiling hood (height: 170 mm) 

Flat cover (height: 2 mm) 

Single/double/triple CSU 

Dräger ceiling fixtures are designed for 

universal compatability. You can choose 

between single, double or triple type. 

Single CSU 

Double CSU 

Double CSU with third arm 

OPTIONS 

Single Double Triple 

CSU 

CSU/CSU 

Light CSU /Light CSU /CSU /Light 

Display CSU /Display CSU /CSU /Display 

X-Ray protection CSU /X-Ray protection CSU /CSU /X-Ray protection

22 | 



Ceiling fixtures for OR lights/display arms 

PRODUCT DESCRIPTION 

The Dräger ceiling mount supports the installation 

of lights and display holders (on the 

central axis). The OR light/display arm can be 

fixed directly under the concrete ceiling 

(direct mounting). The distance tube allows 

mounting at heights of up to 1200 mm under 

a concrete ceiling in order to bridge the space 

above a false ceiling. The installation manuals 

are included with delivery. 

MOUNTING OPTIONS 

Direct mount 

This system is recommended as a direct 

mount or for use with a false ceiling up to a 

distance of 600 mm between the concrete 

and false ceiling or in combination with a laminar 

flow system. The suspension tube is available 

in five standard lengths (220/460/630/ 

800/1000 mm). For service purposes, it 

should be considered that the electrical components 

must be installed in a switch box near 

the OR (max. 40 m). 

D-90851-2013 

With ceiling cover 

D-90851-2013 

With flat cover 

With laminar flow ceiling 

Distance tube 

This system is recommended for use with distances 

> 600 mm between the concrete and 

false ceiling or in combination with a laminar 

flow system. The distance tube is available in 

two standard lengths (600/1200 mm). For 

service purposes, it should be considered that 

the electrical components must be installed in 

a switch box near the OR (max. 40 m). 

D-90851-2013 

D-90851-2013 

With ceiling cover 

With flat cover 

With laminar flow ceiling 

Axis system Arm lengths Spring load arm lengths Vertical force (F) Torque (M) 

1-fold axis 

1f axis xxx 850 mm 930 mm 960 N 910 Nm 

1f axis AC2000 display 700 mm 930 mm 870 N 460 Nm 

1f axis AC3000 display 750 mm 930 mm 940 N 700 Nm 

1f axis xxx 1150 1150 mm 930 mm 1000 N 760 Nm 

1f axis xxx 1450 1450 mm 930 mm 1030 N 640 Nm 

2-fold axis 

2f axis xxx/xxx 700/850 mm 930 mm 1530 N 1280 Nm 

2f axis xxx/xxx 1150 700/1150 mm 930 mm 1400 N 1260 Nm 

3-fold axis 

3f axis xxx/xxx/xxx 700/850/1000 mm 930 mm 1920 N 1850 Nm 

4-fold axis 

4f axis xxx/xxx/xxx/xxx 700/850/1000/1150 mm 930 mm 2490 N 2680 Nm


Workstation components 

Dräger offers a wide range of workstation components. These components are freely 

configurable and help to ensure an ergonomic workplace design. 


SHELVES 

D-27735-2009 

D-27733-2009 

D-27732-2009 

Our shelf portfolio includes a wide range of options. You can choose from different shelf sizes, the number of standard rails or 

add drawers according to your needs. 

SHELF SIZES/UASBLE SURFACE (W X D) 

430 x 340 mm 

630 x 340 mm 

430 x 480 mm 

530 x 480 mm 

630 x 480 mm 

860 x 480 mm 

STANDARD RAILS 

no rails 

side rails 

front rail 

control handles at front 

DRAWER OPTIONS 

1 drawer 

1 drawer with lock (incl. 2 keys) 

2 drawers 

2 drawers and 1 lock 

2 drawers and 2 locks 

drawers and 2 locks on a shelf 

(860 x 480 mm) 

1 drawer and 1 documentation module 

1 documentation module 

D-26256-2009

24 | 



ARM TYPES 

INFUSION ARMS 

For all infusion arms, the options are almost 

limitless. These arms are available in both 

single- and double-arm configurations. Additionally, 

you can select the desired swivel arm 

length: 200/300/400 mm. All arms feature 

adjustable friction brakes (ball bearings) and 

integrated cable management. 

D-32268-2011 

Double swivel arm for 25 mm pole (infusion), mounted on a 38 mm pole 

MONITOR ARMS 

For all monitor arms, a variety of options are 

available. These arms are available as lifting 

arms or lifting arms with additional swivel arm. 

You can also choose an optional keyboard holder. 

Additionally, you can select the desired 

swivel arm length: 200/300/400 mm. All 

arms feature adjustable friction brakes (ball 

bearings) and integrated cable management. 

D-111-2010


CABLE MANAGEMENT 

D-26583-2009 

D-26600-2009 


Cable channel 

Cable boxes 

COLOR CODE CONCEPT 

D-18601-2010 

Handles 

2-1298-94, 2-1201-94, 2-1065-96 

D-18609-2010 

Control at column 

ACCESSORIES 

In addition to the components mentioned 

above, further components are available 

(e.g. infusion poles, application rods, racks, 

clamping rails, equipment holders etc.). 

Compact rail, cable holder, rail holder

26 | 



Gas Management Systems 

Dräger Gas Management Systems (GMS) are designed to manage 

the hospital’s gas supply needs. Dräger offers complete gas supply 

systems which include all necessary components and distribution 

piplines. 

MT-0018-2006 

Gas Terminal Units 

Planning and designing Gas Management 

Systems for either complete hospitals or 

individual areas like a new IC or OR area is 

a challenging task. Different international 

standards and guidelines provide different 

information, require different system configurations 

and different approaches to all the 

challenges occurring. 

Dräger is at your side when it comes to solving 

these challenges and optimizing the system 

design for the benefit of the hospital. 

We have more than 50 years experience in 

designing, building and testing Gas 

Management Systems. 

As every project is different and the systems 

tailor-made for the hospital, it is difficult to 

provide generic planning details. Therefore 

we kindly ask you to contact your local 

Dräger representative for individual planning 

support. 

GAS TERMINAL UNITS 

The locations and quantities of gas terminal 

units are essential parts of the planning of 

every Gas Management System. Depending 

on the clinical procedures and applications, 

different gases are required in different hospital 

areas and the amount of units provided 

needs to match processes and devices used 

there. Dräger builds world-renowned gas terminal 

units since over 40 years and is offering 

outlets according to DIN, British Standard and 

other international types. 

D-1217-2009 

Alarm Management 

ALARM MANAGEMENT SYSTEM 

A complex system like a medical Gas 

Management System requires good operational 

management and provides a host of information. 

Dräger Alarm Management Systems 

consolidate all this information like operational 

and emergency alarms. Analogue operational 

data (e.g. pressure and flow) can also easily 

be integrated. All information can be displayed 

where ever required with LED-, text- or touch 

display monitors and connected to integrated 

building management systems. 

D-16746-2010 

Distribution systems 

DISTRIBUTION SYSTEM 

Medical grade copper tubes according to ISO 

13348 with defined cleanliness and thorough 

testing regime in combination with high quality 

installation (e.g. inert gas shielding during 

welding) form the backbone of the infrastructure 

which ensures that all gases are 

available at the required points of use. Proper 

system calculation according to Dräger 

Design Guidelines and international standards 

and comprehensive testing and installation 

ensure quality and performance of the overall 

system.


D-507-2014 

MT-7526-2004 


Reliable monitoring throughout the entire system 

AREA CONTROL UNITS 

All clinical areas need to be controlled individually 

by Area Control Units. This includes 

pressure gauges for each gas and alarms for 

pressure deviations as well as lock-off valves 

and emergency inlet points. 

MT-5164-2004 

MT-5206-2004 

D-1216-2009 

Vacuum pumps 

Compressed air system 

Cylinder Manifold for oxygen 

VACUUM SYSTEM 

Vacuum is indispensable for surgical application 

(wound field aspiration) as well as bronchus 

suctioning in anaesthesia and intensive 

care treatment. Dräger vacuum systems with 

triplex or quadruplex pumps fulfill the ISO 

7396-1 and match all requirements in terms of 

safety and efficiency. 

COMPRESSED AIR SYSTEM 

Medical air systems for breathing purpuoe 

(4/5 bar) as well as for surgical tool air (7/8 

bar) must fulfill the ISO 7396-1, breathing air 

must also comply with the European Pharmacopoiea. 

Dräger medical air systems combine 

proven design, safe operations, and efficient 

reliability. 

CYLINDER MANIFOLDS 

Oxygen, Nitrous Oxyde and Carbon Dioxide 

can be supplied by 3-fold cylinder manifolds 

or by a liquid oxygen tank (V.I.E.) and a 2-fold 

cylinder manifold with a Dräger Gas Control 

Station as the core of the system.

28 | 



Overview anesthesia portfolio 

ANESTHESIA DEVICES 

D-11215-2010 

D-47654-2012 

MT-0818-2004 

Fabius® plus 

Fabius® plus XL 

Fabius® Tiro 

D-12281-2011 

MT-6421-2008 

D-7656-2010 

Fabius® GS premium 

Primus® 

Apollo® 

D-64715-2012 

D-7116-2011 

D-64716-2012 

Primus® Infinity® Empowered 

Perseus® A500 

Zeus® Infinity® Empowered


MONITORING & IACS 

D-90837-2013 

D-19739-2009 


Infinity® Delta 

Provide continuous monitoring and the same 

bedside level of care during transport 

Infinity® Acute Care System monitoring solution 

Created to meet the needs of all care areas – both 

at bedside and during transport 

VAPORIZER AND SMARTPILOT® VIEW 

MT-2295-2008, D-879-2010 

D-7613-2011 

Vaporizers 

Designed with flexibility in mind – like Dräger 

anesthesia workstations 

SmartPilot® View 

Helps facilitate anesthesia induction, maintenance 

and recovery 

SPECIALTIES 

D-12287-2011 

D-9375-2009 

MT-1100-2007 

Fabius® MRI 

MRI-compatible anesthetic management requires a 

special room layout plan which conforms to the 

patient‘s treatment path 

Fabius® Tiro M 

Offers the full spectrum of anesthesia ventilation to 

military anesthesiologists/cRNAs in the field 

The Surgical Display Controller enables you to 

display patient vital sign information on a largescreen 

display in the Operating Room

30 | 



D-91557-2013 

Accessories 

Day in, day out in the hospital you are faced with enormous time and cost pressures at the same time 

you are taking care of the welfare of your patients. You need technical medical accessories which you 

can use to unlock the full potential of your equipment, which work smoothly, guarantee the best possible 

care of your patients and help you to improve your processes. In short: accessories you can rely on, 

Dräger can supply it for you. 

SODA LIME 

SENSORS 

Whether for patient monitoring, care and 

treatment of neonates, anesthesia, intensive 

care, the emergency department or on the 

ward: each original accessory from Dräger 

doesn't just fulfil all the official quality standards. 

We also measure our accessories 

against our own strict Dräger quality standards. 

MT-2004-2008 

MT-2086-2007 

E.g. CLIC Absorber 

E.g. flow sensor Infinity® ID


VENTILATION 

D-19281-2009 

MT-11164-2006 

D-7059-2009 

Breathing circuits 

Breathing system filters and HMEs 

CO 2 cuvettes 

D-12465-2014 

D-957-2010 

D-402-2010 

Catheter mounts and airway connectors 

Breathing masks 

Intubation kits 

MONITORING 

WARD EQUIPMENT 

D-32549-2011 

D-10282-2011 

D-50637-2012 


RAIL ACCESSORIES AND 

EXAMINATION LIGHTS 

E.g. Masimo® Sensors 

E.g. medical aspiration 

E.g. medical examination light VarioLux®

32 | 


WORKPLACE EXAMPLES 

Workplace 

examples 

for Hybrid OR 

D-443-2014

PLANNING DOCUMENTS FOR HYBRID OR | WORKPLACE EXAMPLES | 33 

Workplace examples for the Hybrid OR 

The following pages give an idea about the number of different 

workplace variants. 

Workplace examples 

The following pages show typical solutions for 

various types of workplaces. They can be used as 

a starting point for new design concepts based on 

customer needs. 

Combine elements of two or more examples to 

develop the best possible solution for your client.

34 | 



Supply units 

ANESTHESIA 

D-90855-2013 

D-90854-2013 

D-90853-2013 

AN-CSU with lifting arm with docked anesthesia 

device, monitoring and infusion (docking via 

equipment holder or MediaDocking) 

AN-CSU with media head and tubes for shelves, 

monitoring and infusion pumps 

AN-CSU with long column for shelves and 

infusion pumps. The anesthesia device is 

placed beside the supply unit 

DOCKING 

D-85706-2013 

Equipment holder for docking carts or anesthesia devices with 

magnetic docking control 

D-18338-2010 

Equipment holder for docking carts and anesthesia devices with 

automatic connection of all media via special MediaDocking interface


SURGICAL WORKPLACE 


D-92502-2013 

D-90852-2013 

CSU with lifting arm, short column and shelf 

CSU with long column and three shelves 

MT-221-2001 

D-12307-2011 

CSU with lifing arm, long column, MediaDocking 

and docked MovaCart 

CSU with media head and tubes for shelves and 

infusion pumps

36 | 



DISPLAY HOLDER 

D-57969-2012 

Multi display holder for up to 8 displays or one 

large display (60" screen size) 

D-16304-2009 

D-90843-2013 

D-90844-2013 

Short column with four separate display arms 

Display arm on central axis 

OR LIGHTS 

D-449-2014 

Single light head on central axis 

Double light combination with integrated HD-camera 

D-103620-2013 

Double light combination with display arm, without camera


ANESTHESIA DEVICES 

D-35680-2011 

D-85719-2013 

Primus® Infinity® Empowered on CSU. Connection via standard docking or 

MediaDocking (also as mobile version available) 

Perseus® A500 ceiling mount. Ergonomic anesthesia workstation 

with integrated remote control for ceiling supply unit 

D-7118-2011 


D-64716-2012 

Perseus® A500. Mobile flexible positioning of monitors and infusion pumps 

Zeus®

38 | 



General 

planning 

MT-5479-2008

PLANNING DOCUMENTS FOR HYBRID OR | GENERAL PLANNING | 39 

General planning 

Learn more about planning a Hybrid OR. 

Planning a Hybrid OR is a complex and technically 

challenging process. This chapter will address the 

many questions encountered when designing a 

new OR. 

An intimate knowledge of the Dräger product 

portfolio and a thorough understanding of 

customer needs are vital prerequisites for success. 

General planning

40 | 




It is important to keep the following in mind: 

CEILING SUPPLY UNITS 

– Which anesthesia device (lifting or mobile version)? 

– Which surgical devices have to be placed 

(size, weight, media connections)? 

– Is a cart (MovaCart) in use which could be docked 

at the supply unit? 

– Are there infusion pumps which have to be mounted? 

– What is the most ergonomic placement of devices? 

– Select a long or short column/head/equipment rack 

(e.g. AN-device under or in front column) 

– Select an arm system (where must the supply unit to 

be placed, where are parking the positions?) 

– Select height adjustable or non-adjustable system 

(e.g. different staff and heights) 

– Select workplace components (shelves, infusion poles) 

– Select handles/grips for brakes/lift (from where will 

the units be positioned? back, front) 

– Select cable management (are many cables and hoses to be 

expected? How can they be managed? Cable boxes, 

cable holder, channels?) 

CEILING MOUNT 

– Design the ceiling fixture for max. load capacity (upgradeability) 

– Select a uni-flange for possible double CSU (upgradeability) 

– Design of double CSU: clarify dead swivel range 

of arm system > long distance tubes on rear or front side 

– Consider a second anesthesia CSU for TIVA 

(Total intravenous Anesthesia) or infusion management 

– Possible parking positions for supply units for OR change 

> stops in arm systems have to be set accordingly 

– For MediaDocking: The column has to be equipped with the same 

media outlets. If a replacement anesthesia device is necessary 

hoses and cables must be available to ensure media supply 

– Consider possible collisions of pendants with air flow ceiling 

curtains or other interior fixtures 

– Consider space (clearance height) under arm systems 

(arm/motor hood) and grips of OR lights, space under columns 

for cleaning or further devices such as patient warmer or 

suction systems 

OR LIGHTS/CAMERAS/MONITORS 

– How many light heads are required? 

– Which size is necessary? 

– Do you have a central axis? 

(is it possible? movement of C-Bow) 

or a separate mounting on two sides? 

– Do you need a third light at foot end? 

(e.g. for vein harvesting) 

– Do you need a small examination light? 

(e.g. preparation of catheter) 

– Do you need an integrated camera or external camera? 

– How will the lights be controlled? 

(at cardanic, wall control panel, remote control, touch screen 

(integrated OR)) 

– Where will displays be placed? 

(size and number is important) 

– Select a display holder 

(e.g. Pendula, display holder at central axis or holder 

at supply unit) 

D-7118-2011



D-64683-2012 

Planning an anesthesia workplace 

ELEMENTS OF AN ANESTHESIA 

WORKPLACE 

– Anesthesia device (mobile or at CSU) 

– Infusion pumps (at CSU or AN-device, separate) 

– Anesthesia supply unit 

– Anesthesia trolley 

– Blood gas analyser 

– Cellsaver 

– Sonography device 

– Space, about 2 x 4 m 

– Must be easily accessible and an ergonomic operation 

of equipment must be ensured. Specify any meaningful parking 

position for angiography system 

– Standard hose lengths up to 3 m, special lengths on request 

MONITORING/ANESTHESIA/IT 

– Different workstation configurations are possible 

(especially with Dräger Perseus A500) 

– Position of control cockpit has to be clarified 

– Position of patient monitoring has to be clarified 

– Position of IT portal has to be clarified 

– Position of infusion pumps has to be clarified 

– Optimize workplace for connection to ceiling supply unit, 

e.g. select shelf, drawer, small appliances rod

42 | 



Solution 1 

Siemens – Artis zee floor arrangement – supply unit 

arrangement with OR lights and display boom


This setup is optimized for a floor mounted C-Bow system. All ceiling fixtures are out of the moving range of the C-Bow. 

It is possible to have a central axis for OR lights over the OR table. 

1. ANESTHESIA 

A double ceiling mount is selected to attach 

an X-Ray protection shield and the swiveling 

anesthesia supply unit. The anesthesia device 

stands in front of or beneath the supply unit. 

The supply unit has a long column. On this 

column, a shelf and an infusion pole is mounted. 

Additionally, there are two integrated 

cable channels at the front side of the column 

for storing cables and hoses. 

Devices at supply unit 

Monitoring (or at AN-device) 

IT/Documentation (or at AN-device) 

Pacemaker 

Defibrillator 

Infusions (or at AN-device) 

Additional devices supplied by unit 

Anesthesia device 

Blood gas analysis 

Sonographer 

Cell saver 

Endotracheal aspiration (often at AN-device) 

Further infusions 

Patient warmer 

2. CARDIO 

There is a double ceiling mount to attach a 

multi display holder and a supply unit for cardio. 

The display holder can carry 8 displays 

(up to 21"). The cardio supply unit is a small 

liftable column with one shelf. 


Monitoring 


Heart lung machine HLM 

Hypothermia device 

3. SURGERY 

There is a triple ceiling mount to attach an 

X-Ray protection shield, multi display holder 

and a supply unit for surgery. The display 

holder can carry 8 displays (up to 21"). The 

surgery supply unit is a long, liftable column 

with four shelves. For storing cables and 

hoses, there are two cable channels at the 

front of the column. 


HF surgery device 

ECG 


Surgical suction device 

Contrast agent injector 

4. OR LIGHTS 

A double light solution is optimal. There is a 

main light (160.000 lux) and a satellite 

(110.000 lux). Optionally, it is possible to 

attach a further separate ceiling mount at the 

foot end for a third light head (e.g. for vein harvesting). 

General planning

44 | 



Solution 2 

Siemens – Artis zee ceiling arrangement – supply unit 



This setup is optimated for a ceiling mounted C-Bow system. All ceiling fixtures are out of the moving range of the C-Bow. 

It is not possbile to have a central axis for OR lights over the OR table. Because of the moving range of the C-Bow it is 

necessary to have fixations for the OR lights at the sides. The light heads need long swivel arms to reach the operation field. 

5. SURGERY AND CARDIO 

There is a double ceiling mount to attach 

two supply units for surgery and cardio. The 


with four shelves. For storing cables and 

hoses, there are two cable channels at the 

front of the column. The cardio supply unit is 

a small, liftable column with four separate 

swiveling display arms (load capacity for 

each arm: 15 kg). 

SURGERY 



ECG 

CARDIO 


Displays (4 x) 







6. ANESTHESIA 

A triple ceiling mount is selected to attach an 

X-Ray protection shield, the liftable anesthesia 

supply unit and long swivel arm for the light 

head (satellite: 110.000 lux). The anesthesia 

device is lifted and docked by the supply unit. 


column, a shelf and an infusion pole are 

mounted. Additionally, there are two integrated 

cable channels at the front side of the 

column for storing cables and hoses. 




Pacemaker 

Defibrillator 





Sonographer 

Cell saver 




7. DISPLAY HOLDER AND OR LIGHT 

To attach the display holder and the OR light, 

a double ceiling mount is used. The display 

holder can hold up to 8 displays (size: up to 

21"). The light head (160.000 lux) is brought 

over the operating field with a long swivel arm. 

General planning

46 | 



Solution 3 

Siemens – Artis zee ceiling arrangement – supply unit 

MediaDocking arrangement with OR lights and display boom


This setup is optimized for a ceiling-mounted C-Bow system. All ceiling fixtures are out of the moving range of the C-Bow. 

It is not possible to have a central axis for OR lights over the OR table. Because of the moving range of the C-Bow, it is 

necessary to attach mounts for the OR lights on the sides. The light heads require long swivel arms to reach the operating 

field. The difference between solution 2 and 3 involves the docking of the anesthesia device and a MovaCart at the surgery 

supply unit. The supply units for surgery should have the same media outlets to enable rapid switching between anesthesia 

and surgery. This ensures a high degree of flexibility. 

12. ANESTHESIA 

A triple ceiling mount is selected to attach an 

X-Ray protection shield, the liftable anesthesia 

supply unit and long swivel arm for light head 

(satellite: 110.000 lux). The anesthesia device 

is lifted and docked to the supply unit (via 

MediaDocking). The supply unit has a long 

column. At this column an infusion pole is 

mounted. 




Pacemaker 

Defibrillator 





Sonographer 

Cell saver 




13. SURGERY AND CARDIO 

There is a double ceiling mount to attach 

two supply units for surgery and cardio. The 


with MediaDocking to lift a Mova-Cart 

(trolley with 4 shelves, 1 drawer). The cardio 

supply unit is a small liftable column with 

four separate swiveling display arms (load 

capacity for each arm: 15 kg). 

SURGERY 



ECG 

CARDIO 










For placing the display holder and the OR 

light, a double ceiling mount is used. The 

display holder can carry 8 single displays 

(size: up to 21"). The light head (160.000 lux) 

is brought over the operating field by a long 

swivel arm. 

General planning

48 | 



Solution 4 

Siemens – Artis zeego 30° arrangement – supply unit 



This setup is optimized for a floor-mounted multi-axis C-Bow system 30° arrangement. All ceiling fixtures are out of the 

moving range of the C-Bow. Here, it is possible to have a central axis for OR lights over the OR table. In this layout there is 

a third light head at the foot end. The supply units for surgery should have the same media outlets to enable rapid switching 

between anesthesia and surgery. This ensures a high degree of flexibility. 

8. ANESTHESIA AND CARDIO 

A triple ceiling mount is selected to attach 

an X-Ray protection shield, the liftable anesthesia 

supply unit and long swivel arm for 

light head (satellite: 110.000 lux). The anesthesia 

device is lifted and docked to the supply 

unit (via MediaDocking). The supply unit 

has a long column. At this column, an infusion 

pole is mounted. 




Pacemaker 

Defibrillator 


CARDIO 






Sonographer 

Cell saver 







9. OR LIGHT AND X-RAY PROTECTION 

For the OR light, a double ceiling fixation at 

the foot end for a third OR light and an X-Ray 

protection shield is used. The light head 

(110.000 lux) is brought over the operating 

field by a long swivel arm. 

10. SURGERY 

There is a single ceiling mount to attach the 

surgery supply unit. This unit is a long, liftable 

column with MediaDocking to lift a MovaCart 

(trolley with 4 shelves, 1 drawer). 

SURGERY 



ECG 




11. DISPLAY HOLDER 

A separate ceiling mount is used for placing 

the display holder. The display holder can 

carry a single display (size: 60”). 

General planning

50 | 



Solution 5 

Siemens – Artis zeego parallel arrangement – supply unit 

MediaDocking arrangement with OR lights and display 

boom


This setup is optimized for a floor-mounted, multi-axis C-Bow system (parallel arrangement) All ceiling fixtures are out of the 

moving range of the C-Bow. It is possible to have a central axis for OR lights over the OR table. Here, a symmetric layout with 

side-mounted light heads was chosen. The supply units for surgery should have the same media outlets to enable rapid 

switching between anesthesia and surgery. This ensures a high degree of flexibility. 

14. X-RAY PROTECTION 

For the X-Ray protection shield, there are two 

single ceiling mounts at the head and foot 

ends. 

15. ANESTHESIA/CARDIO 


a liftable anesthesia supply unit and a multi 

display holder. The anesthesia device is lifted 

and docked to the supply unit (via Media- 

Docking). The supply unit has a long column. 

On this column, an infusion pole is mounted. 

This supply unit is also used as a cardio unit 

to supply the Hlmor hypothermia device. The 


(size: up to 21"). 




Pacemaker 

Defibrillator 





Sonographer 

Cell saver 






16. SURGERY 

There is a double ceiling mount to attach the 

surgery supply unit and a multi display holder. 

This unit is a long, liftable column with 

MediaDocking to lift a MovaCart (trolley with 

4 shelves, 1 drawer). The display holder can 

carry 8 single displays (size: up to 21"). 

SURGERY 



ECG 




General planning

52 | 



Solution 6 

Philips – Allura FD 20 ceiling arrangement – supply unit 

arrangement with OR lights and display booms


This setup is optimized for a ceiling mounted C-Bow system (basic arrangement) All ceiling fixtures are out of the moving 

range of the C-Bow. It is not possible to have a central axis for OR lights over the OR table. Therefore you need to have long 

swivel arms for the OR lights to reach the operating field. This layout offers a basic setup which can be upgraded with further 

supply units if needed. X-Ray protection shields are not shown in this layout. These can be mounted at the ceiling or mobile lead 

glass walls can be used. 


A single ceiling mount is selected to attach a 

liftable anesthesia supply unit. The anesthesia 

device is lifted and docked to the supply unit. 


column, an infusion pole is mounted. 





Pacemaker 

Endotracheal aspiration 


Cell saver 


Sonographer 







(size: up to 21”). The light head (160.000 

lux) is brought over the operating field by a 

long swivel arm. 





(size: up to 21”). The light head (110.000 

lux) is brought over the operating field by a 

long swivel arm. 

20. CARDIO 

There is a single ceiling mount to attach a 

supply unit for cardio. The cardio supply unit 

is a small liftable column with two separate 


each arm: 15 kg) and a shelf. 





Heart lung machine 




General planning

54 | 



Solution 7 

Philips – Allura FD 20 FlexMove arrangement – supply unit 



This setup is optimized for a ceiling mounted C-Bow system (basic arrangement) All ceiling fixtures are out of the moving range 

of the C-Bow. In this configuration we have a FlexMove system. This system has an additional movement range (x/y – movement) 

which has to be taken into consideration during planning. For this additional function there are wide rails at the ceiling. It is not 

possible to have a central axis for OR lights over the OR table. Therefore you need to have long swivel arms for the OR lights to 

reach the operating field. This layout offers a basic setup which can be upgraded with further supply units if needed. X-Ray 

protection shields are not shown in this layout. These can be mounted at the ceiling or mobile lead glass walls can be used. 


for placing the display holder and the OR light, 

a double ceiling mount is used. The display 

holder can carry 8 single displays (size: 

up to 21”). The light head (110.000 lux) is 

brought over the operating field by a long 

swivel arm. 

20. CARDIO 


















unit. The supply unit has a long column. On 

this column, an infusion pole is mounted. 





Pacemaker 



Cell saver 


Sonographer 



22. OR LIGHT 

The light head (160.000 lux) is mounted 

separately and is brought over the operating 



For placing the display holder a single 

ceiling mount is used. The display holder can 

carry 8 single displays (size: up to 21”). 

General planning

56 | 



Solution 8 




This setup is optimized for a ceiling mounted C-Bow system. All ceiling fixtures are out of the moving range of the C-Bow. In this 

configuration we have a FlexMove system. This system has an additional movement range (x/y – movement) which has to be 

taken into consideration during planning. For this additional function there are wide rails at the ceiling. It is not possible to have 

a central axis for OR lights over the OR table. Therefore you need to have long swivel arms for the OR lights to reach the 

operating field. Compared to Solution no. 7 there is an additional supply unit and OR light at feet end for second surgical team 

(e.g. vessel stripping for bypasses interventions) 



light, a double ceiling mount is used. The display 

holder can carry 8 single displays (size: 

up to 21”). The light head (110.000 lux) is 

brought over the operating field by a long 

swivel arm. 

20. CARDIO 


















For placing the display holder a single 

ceiling mount is used. The display holder can 

carry 8 single displays (size: up to 21”). 


A single ceiling mount is selected to attach 

a liftable anesthesia supply unit. The anesthesia 


unit. The supply unit has a long column. 

25. SURGERY AND OR LIGHT 


a liftable supply unit and an OR light. The 

supply unit has a short thin column and has 

one shelf for a device. The light head 

(110.000 lux) is used by secondary surgical 

team. 





Pacemaker 





Cell saver 


Sonographer 




Contrast agency injector 


General planning

58 | 



Solution 9 




This setup is optimized for a ceiling mounted C-Bow system. All ceiling fixtures are out of the moving range of the C-Bow. In this 

configuration we have a FlexMove system. This system has an additional movement range (x/y – movement) which has to be taken 

into consideration during planning. For this additional function there are wide rails at the ceiling. It is not possible to have a 

central axis for OR lights over the OR table. Therefore you need to have long swivel arms for the OR lights to reach the operating 

field. This layout can be upgraded later with further supply units if needed. X-Ray protection shields are not shown in this layout. 

These can be mounted at the ceiling or mobile lead glass walls can be used. We have two separate fixation points at the ceiling 

for the operating lights which increases flexibility. Due to positioned display holder at the feet end it’s possible to swop the sides 

for different interventions. 




device is lifted and docked to the supply unit. 


column, an infusion pole is mounted. 





Pacemaker 



Cell saver 


Sonographer 







26. CARDIO & INFUSIONS 

There is a double ceiling mount to attach a 

supply unit for cardio and infusions. The 

cardio supply unit is a small liftable column 

with two separate swiveling display arms 

(load capacity for each arm: 15 kg). The supply 

unit for infusions is realized by an horizontal 

media head with an equipment rack 

below. On this rack are three shelves placed 

for devices. 


CARDIO 


INFUSIONS 

Defibrillator 


Monitoring 

Infusions 







27. DISPLAY HOLDERS 

For placing the display holders a double ceiling 

mount is used. The display holder can 

carry 8 single displays (size: up to 21”) or 

one large display. The double ceiling mount 

enables a side change by the displays in 

case of changing interventions or setups. 





General planning

60 | 



CAD Drawings – Configuration 1 

In this chapter, all configurations shown in “Workplace Solutions” are listed. 

The numbers correspond to the numbers in the ground plans. 

Movita - Radiation Protection


Configuration 2 


Movita - Pendula Cardiotechnology Type

62 | 




Movita - Pendula - Radiation Protect




Polaris® 500/700

64 | 




Movita - Cardiotechnology Type




Movita - Cardiotechnology Type

66 | 




Pendula 60" - Polaris® 700




Movita - Forta Cardiotechnology Type

68 | 




Polaris® 500 - Radiation Protection




Forta MD

70 | 




Pendula 60"




Forta MD - Polaris® 500 - Radiation Protection

72 | 




Movita - Forta Cardiotechnology Type




Radiation Protection

74 | 




Pendula - Forta MD - Polaris® 700




Pendula - Forta MD - Polaris® 500

76 | 




Movita 10 (Lift)





78 | 








Movita 05 (Lift)

80 | 




Movita 10 (Lift)




Polaris® 750

82 | 




Pendula 60"




Movita 10 (Lift)

84 | 




Agila 05 (Lift) - Polaris® 500




Movita 05 (Lift) - Movita AK (Lift)

86 | 




Pendula 60" - Pendula 19"




Polaris® 500

88 | 

PLANNING DOCUMENTS FOR HYBRID OR

PLANNING DOCUMENTS FOR HYBRID OR | CONTACT | 89 

Contact 

For planners and architects: 

CONTACT FOR PROJECTS AND TECHNICAL PLANNING: 

Marco Patzer 

Project Engineer 

+49 451 882 2419 

marco.patzer@draeger.com 

Sebastian Rahn 

Project Engineer 

+49 451 882 2446 

sebastian.rahn@draeger.com 

WEB: 

www.draeger.com/planning 

Subject to change. 

Not all products are available in all parts of the world. 

More information: www.draeger.com

CORPORATE HEADQUARTERS 

Drägerwerk AG & Co. KGaA 

Moislinger Allee 53–55 

23558 Lübeck, Germany 

www.draeger.com 

Manufacturer: 

Dräger Medical GmbH 



As of August 2015: 

Dräger Medical GmbH changes 

to Drägerwerk AG & Co. KGaA. 

REGION EUROPE CENTRAL 

AND EUROPE NORTH 




Tel +49 451 882 0 

Fax +49 451 882 2080 

info@draeger.com 

REGION EUROPE SOUTH 

Dräger Médical S.A.S. 

Parc de Haute Technologie d’Antony 2 

25, rue Georges Besse 

92182 Antony Cedex, France 

Tel +33 1 46 11 56 00 

Fax +33 1 40 96 97 20 

dlmfr-contact@draeger.com 

REGION MIDDLE EAST, AFRICA 


Branch Office 

P.O. Box 505108 

Dubai, United Arab Emirates 

Tel +971 4 4294 600 

Fax +971 4 4294 699 

contactuae@draeger.com 

REGION ASIA / PACIFIC 

Draeger Medical 

South East Asia Pte Ltd. 

25 International Business Park 

#04-27/29 German Centre 

Singapore 609916, Singapore 

Tel +65 6572 4388 

Fax +65 6572 4399 

asia.pacific@draeger.com 

REGION CENTRAL 

AND SOUTH AMERICA 

Dräger Panama Comercial S. de R.L. 

Complejo Business Park, 

V tower, 10th floor 

Panama City 

Tel +507 377 9100 

Fax +507 377 9130 

contactcsa@draeger.com 

90 68 051 | 1411-2 | Communications & Sales Marketing | AW | LE | Printed in Germany | Chlorine-free – environmentally compatible | Subject to modifications | © 2014 Drägerwerk AG & Co. KGaA

Planning Documents for Hybrid OR

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?