Key Products Guide - Whip Mix

Aquaspense aDVANCED
DISPENSING TECHNOLOGY
The AquaSpense and AquaSpense SL
are extremely versatile dispensing units
that improve accuracy, maintain quality
and eliminate remakes.
• Accurately weigh gypsum or investment
powder and dispense the precise
amount of water and/or special
liquid required
• Eliminate human error factor with
no hand measuring required
AquaSpense
Water Dispenser
VPM2 Programmable
Vacuum Mixing Unit
Designed for vacuum mixing all types of
gypsums, plasters and investments, the
VPM2 features 30 separate programs
utilizing multiple stages for time, speed
and paddle direction. The powerful
vacuum pump provides a bubble-free
mix and hands-free operation.
• 3-year warranty
AquaSpense SL
Special Liquid/Water Dispenser
MainStay
Dowel Pin System
The unique single pin design, with protective
sleeve and end cap, creates a solid
foundation for fabrication of fixed crown
and bridge restorations.
• Ribbed plastic sleeve holds tight
while pin removes easily
• Rubber end cap stabilizes quadrants
and eliminates use of dowel pin bur
Xcavator Automated
Divesting Unit
• Place the hot ring directly into the
machine, saving an hour or more
of cooling time
• Ideal for divesting fragile ceramic
material
• Calibrate the unit to your ring size
and investment type so it consistently
cuts without damage to copings
ARDENT ARTICULATING
PAPER Superior quality
dental marking paper
• Long-lasting cutting action
• Available in both 10- and 12-inch
diameter sizes
• One-inch mounting hole and drive
pin hole to fit most model trimmers
• Guaranteed one year

Blue Wonder
Diamond Wheels
Diamond particles embedded in the
fiberglass substrate provide fast,
aggressive cutting action.
• Long-lasting cutting action
• Available in both 10- and 12-inch
diameter sizes
• One-inch mounting hole and drive
pin hole to fit most model trimmers
• Guaranteed one year
Ulti-Mate Easy To Use
Articulator
• Magnetized fossae for stabilization
of the fossa and positive return to
centric position
• Lower member designed to tilt the
instrument back at a 45 degree angle
• Innovative centric lock pins allow the
instrument to be used in three positions
Available on shipments in
U.S. and Canada only.
RESINROCK Resin-Fortified,
Low-Expansion Die Stone
Produces models of the highest quality.
A unique blend of synthetic resin and alpha
gypsum produces a smooth, non-brittle
model which resists chipping.
• ISO Type 4
• Low setting expansion of 0.08%
• Available in peach, blue, grey, ivory
white, green and new golden brown
leanrock lowexpansion
Die Stone
Formulated specifically for laboratories
that want to pour small
batches (about 6 full
arches) and have
working models
ready in 15 minutes.
• ISO Type 4
• Models may be used with CAD Cam
systems, eliminating the need for a
specialty scan stone or spray
• Available in ivory and blue
leanrock XL5 Highexpansion
Die Stone
• ISO Type 5
• For increased expansion
• Available in ivory
FLOWSTONE Fluid, Low-
Expansion Base Stone
Produces accurate, bubble-free
bases without vibration.
The dense surface and low
setting expansion produce
a dimensionally stable base
for master models.
• ISO Type 4
• Available in light blue,
buff, white, blue and
light green
FLOWSTONE FS
QUICK SETTING
Base Stone
• ISO Type 4
• Offers a quick
setting time of
8 minutes
• Streamlines the model
fabrication process when
coupled with LeanRock Die Stone
Formula 1 universal
investment
This high-performance, universal
investment works equally well for all
alloys and pressable ceramics,
reducing inventory.
• Wide expansion range
• Robust formula prevents cracking
and devests easily
• Rapid and standard burnout capabilities
• 15-minute benchset time

Whip Mix porcelain furnaces are built extra tough to withstand the
demands of high-temperature porcelain firing, with advanced thermal
components, programming cycles and extremely accurate calibration.
Pro 100 plus
High Temperature
Porcelain Furnace
• C ycles for In-Ceram, ® Wol-Ceram ®
and Captek TM
• Built for high temperature sintering
• Also works great for conventional
high and low fusing porcelain cycles
Pro 100
Porcelain Furnace
• New Quick-Cool Jet with vacuum
cools the muffle in half the time
• Improved muffle and thermocouple
for greater efficiency
• Now with 3-Point Calibration
for unsurpassed accuracy
• Improved display for better
readability
• Advanced cycles for sintered
alloys, porcelain on titanium and
advanced porcelain products
• 3-year or 3,750 muffle
hour warranty
PRO Press 100
Pressing Furnace
• Advanced cycles for In-Ceram, ®
Procera, ® pressing, and
porcelain firing
• In-program multiple speeds
• Fast-cools your oven by
using vacuum
• 3-year or 3,750 muffle
hour warranty
FREE HIGH-EFFICIENCY
PUMP WITH EVERY
PRO SERIES FURNACE
PROCHECK calibration
check device
Allows easy and quick verification
of temperature calibration for all Pro
Series furnaces.
• Verify accuracy and repeatability
in less than 8 minutes
• No costly silver wire expense, no
porcelain tab expense, no slow
“trial and error” with cool down
cycles between iterations
Whip Mix Corporation
361 Farmington Ave. • P.O Box 17183
Louisville, Kentucky USA 40217-0183
800-626-565 • 502-637-1451 • Fax: 502-634-4512
For details, free samples and special promotions visit www.whipmix.com or
call Customer Service at 800-626-5651.
SL05001 1/09