Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Nozzles<br />
up to 15,000 PSI (1000 Bar)<br />
TUBE CLEANING NOZZLES<br />
SElection & part numbering<br />
Use the part numbering instructions and flow chart on this<br />
page for ordering tube nozzles from pages E-22 to E-30.<br />
Nozzle Part Numbering<br />
Example Part Number:<br />
NOZZLE SERIES<br />
FP EX MS<br />
MP E C<br />
FPC FPT TP<br />
FP 3 4 - 7<br />
SIZE<br />
From left column of nozzle<br />
size and pattern charts<br />
(Pages E-22 – E-30)<br />
PATTERN<br />
Specify number corresponding<br />
to desired pattern from nozzle<br />
size and pattern charts.<br />
(Pages E-22 – E-30)<br />
HYPHEN<br />
FLOW RATING<br />
Find the flow rate number<br />
that most closely matches<br />
the desired flow and pressure<br />
from chart below. Example:<br />
a flow rate number of 7 will<br />
flow 6.6 gpm at 6,000 psi.<br />
In the pattern and size<br />
charts, each unique pattern<br />
specifies the minimum flow<br />
rate at which the nozzle is<br />
available. Be certain that the<br />
Flow Rate selected is equal<br />
to or greater than the<br />
specified minimum.<br />
NOZZLES<br />
Flow<br />
Flow (gpm) at specified pressures (psi)<br />
Flow (lpm) at specified pressures (bar)<br />
Rate 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000 10,000 11,000 12,000 13,000 14,000 15,000 200 300 400 500 600 700 800 900 1000<br />
2 1.2 1.5 1.7 1.9 2.1 2.3 2.4 2.6 2.7 2.9 3.0 3.1 3.2 3.3 5.5 6.8 7.8 8.8 9.6 10.4 11.1 11.8 12.4<br />
3 1.5 1.8 2.1 2.4 2.6 2.8 3.0 3.2 3.3 3.5 3.7 3.8 4.0 4.1 6.8 8.3 9.6 10.7 11.7 12.7 13.5 14.4 15.1<br />
4 1.8 2.2 2.6 2.9 3.2 3.4 3.7 3.9 4.1 4.3 4.5 4.7 4.8 5.0 8.3 10.2 11.7 13.1 14.4 15.5 16.6 17.6 18.6<br />
5 2.6 3.1 3.6 4.0 4.4 4.8 5.1 5.4 5.7 6.0 6.3 6.5 6.8 7.0 11.6 14.2 16.4 18.4 20.1 21.7 23.2 24.6 26.0<br />
6 3.3 4.1 4.7 5.2 5.7 6.2 6.6 7.0 7.4 7.8 8.1 8.4 8.7 9.1 15.0 18.4 21.2 23.7 26.0 28.1 30.0 31.8 33.5<br />
7 3.8 4.7 5.4 6.0 6.6 7.1 7.6 8.1 8.5 8.9 9.3 9.7 10.1 10.4 17.2 21.1 24.4 27.2 29.8 32.2 34.5 36.6 38.5<br />
8 4.1 5.1 5.9 6.6 7.2 7.8 8.3 8.8 9.3 9.7 10.2 10.6 11.0 11.4 18.8 23.0 26.6 29.7 32.6 35.2 37.6 39.9 42.1<br />
9 4.5 5.5 6.4 7.1 7.8 8.4 9.0 9.6 10.1 10.6 11.1 11.5 11.9 12.4 20.5 25.1 28.9 32.3 35.4 38.3 40.9 43.4 45.7<br />
10 5.2 6.3 7.3 8.1 8.9 9.6 10.3 10.9 11.5 12.1 12.6 13.1 13.6 14.1 23.4 28.6 33.0 36.9 40.4 43.7 46.7 49.5 52.2<br />
12 5.6 6.8 7.9 8.8 9.6 10.4 11.1 11.8 12.4 13.0 13.6 14.2 14.7 15.2 25.2 30.8 35.6 39.8 43.6 47.1 50.4 53.4 56.3<br />
14 6.7 8.2 9.5 10.6 11.6 12.5 13.4 14.2 15.0 15.7 16.4 17.1 17.7 18.4 30.4 37.2 43.0 48.1 52.7 56.9 60.8 64.5 68.0<br />
15 7.3 9.0 10.4 11.6 12.7 13.7 14.6 15.5 16.4 17.2 17.9 18.7 19.4 20.1 33.2 40.7 47.0 52.5 57.5 62.1 66.4 70.4 74.2<br />
20<br />
40<br />
10.2 12.5 14.5 16.2 17.7 19.2 20.5 21.7 22.9 24.0 25.1 26.1 27.1 28.1 46.4 56.9 65.7 73.4 80.4 86.9 92.9 98.5 104.0<br />
13.2 16.2 18.7 20.9 22.9 24.7 26.5 28.1 29.6 31.0 32.4 33.7 35.0 36.2 60.0 73.5 84.8 94.8 104.0 112.0 120.0 127.0134.0<br />
TUBE CLEANING NOZZLES<br />
SERIES FP<br />
• For use with flex or rigid lances that have male pipe threads (NPT Male)<br />
• Recessed orifices for protection from surface abrasion or damage by wrenches<br />
• Double-tapered nose for fast, unrestricted travel through plugged tubes<br />
• Machined from heat-treated stainless steel<br />
• Maximum working pressure: 15,000 psi (1000 bar)<br />
• Six sizes, seven standard patterns, and fourteen flow ratings<br />
(see the following page)<br />
• Custom patterns available<br />
<strong>Jetstream</strong> of Houston, LLP<br />
Phone: US & Canada: 800-231-8192 or 832-590-1300<br />
Web Site: www.waterblast.com<br />
E-21<br />
Copyright <strong>Jetstream</strong> of Houston, LLP © 2011<br />
Effective 2/2011
Change language