UNx® FLUID ENDS - Jetstream

PUMPS & FLUID ENDS
up to 15,000 PSI (1000 Bar)
UNx ® Fluid End
MODELs 4215HF & 3615HF
The UNx Fluid End is a cost-effective solution to
increase the available operating pressure or range of
pressures of an existing Jetstream 3600 or 4200 UNx
Pump. These fluid end models deliver all of the benefits
that define UNx Fluid Ends as the best in the industry.
• Bolt-on addition to 3615 and 4215 pumps
• 150 to 325 horsepower (112 to 242 kW)
• Superior performance
• Greater flexibility in the field
• Reduced downtime and maintenance
• See UNx Features and Benefits on page B-1
• Includes hose adapters and one rupture disc holder
• Choose an additional rupture disc holder or a Severe
Service Relief Valve as a second safety device General Specs
• Pressure gauge and burst discs not included
Plungers Connection Types*
4215HF Fluid Ends
Fluid
End
Part
No.
Pump
Model
#
Stroke
in
mm
Discharge
Ports
Top Ports
(Accessory)
Pump
Speed
Range
RPM
4200 3 4.25 108 150 – 520
3/4" NPT Fml 1/2" NPT Fml
3600 3 3.60 92 150 – 550
* See details on all connection types beginning on page I-2.
Plunger Size Flow at Specified Pump Speeds**
Power
Max. Flow / Pressure
Diameter 150 RPM 200 RPM 300 RPM 400 RPM 500 RPM
Input
Flow** Pressure
No.
in mm gpm lpm gpm lpm gpm lpm gpm lpm gpm lpm hp kW gpm lpm psi bar
53090 #10 .980 24.89 6.2 24 8.3 32 12.5 47 16.7 63 20.8 79
53095 #11 1.100 27.94 7.9 30 10.5 40 15.7 60 21.0 79 26.2 99
53100 #12 1.200 30.48 9.4 35 12.5 47 18.7 71 25.0 95 31.2 118
53105 #13 1.335 33.91 11.6 44 15.5 59 23.2 88 30.9 117 38.6 146
53110 #15 1.500 38.10 14.6 55 19.5 74 29.3 111 39.0 148 48.8 185
53330 #16 1.670 42.42 18.1 69 24.2 92 36.3 137 48.4 183 60.5 229
210 157 21.7 82 15,000 1000
260 194 26.9 102 15,000 1000
210 157 27.1 103 12,000 825
325 242 32.5 123 15,000 1000
260 194 32.2 122 12,500 850
210 157 32.5 123 10,000 700
325 242 40.2 152 12,500 850
260 194 40.2 152 10,000 700
210 157 40.2 152 8,000 550
325 242 50.4 191 10,000 700
260 194 50.4 191 8,000 550
210 157 50.1 190 6,500 450
325 242 62.9 238 8,000 550
260 194 62.0 235 6,500 450
210 157 62.9 238 5,000 350
PUMPS &
FLUID ENDS
** Displacement (flow) values represented refer to “theoretical” flow, neglecting inefficiency resulting from compressibility of water and expansion of pressurebearing
components. Specified maximum flow rates are based on selected input powers and working pressures and constrained by power end limitations
(pump speed, frame load, maximum input power). Actual output may vary depending on the performance specifications of the engine (or motor), drive sheave
ratio, and actual working pressure.
Jetstream of Houston, LLP
Phone: US & Canada: 800-231-8192 or 813-590-1300
Web Site: www.waterblast.com
B-16
Copyright Jetstream of Houston, LLP © 2011
Effective 2/2011