LANTEK CABLE TESTER USER'S GUIDE - Ideal Industries
LANTEK CABLE TESTER USER'S GUIDE - Ideal Industries
LANTEK CABLE TESTER USER'S GUIDE - Ideal Industries
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Chapter 2<br />
Test Setup Procedures<br />
2-20<br />
ACTIVATING THE TONE GENERATOR USING THE RH<br />
1. Connect the Remote Handset to the cable under test.<br />
2. Press TONE on the Remote Handset to enter Tone mode. The Remote Handset<br />
two-line display shows the first line TONE. The second line shows the tone type<br />
and placement of tone in the XY form of characters.<br />
X Character<br />
(Tone Type)<br />
Y Character<br />
(Placement of tone)<br />
L = Low 78 = Pair 78<br />
H = High 36 = Pair 36<br />
W = Warble 54 = Pair 54<br />
12 = Pair 12<br />
Example: L78 = Low tone, Pair 78<br />
Note: The Tone mode will remain active until ESCAPE is pressed.<br />
3. Select the pair on which to place the tone by pressing the TONE key to cycle<br />
through the options.<br />
4. Select the tone for the selected pair by pressing TONE to cycle through<br />
the options.
Change language