Assembly instructions - KLARO GmbH

Assembly instructions KLARO UV hygienisation stage
3.2. Scope of delivery
The UV hygienisation stage (without control cabinet and retrofit kit) for the internal
assembly consists of the following components.
Item no.: Quantity Description
1 UNIT
1 UNIT
UV reactor with pump* on retaining
plate
UV reactor with siphon on retaining
plate
909006
UV module
S50
with pump
909007
UV module
S50
without pump
909006
UV module
S80
with pump
● ○ ●
○ ● ○
5 m Radiator cable 4x 0.5 mm² ○ ○ ●
20 m Radiator cable 4x 0.5 mm² ● ● ○
5 m
20 m
901356 1 UNIT
Earthing cable H07V-K 1x 2.5 mm²
gn/ye
Earthing cable H07V-K 1x 2.5 mm²
gn/ye
○ ○ ●
● ● ○
1 UNIT Switching unit** 180 x 254 x 111 mm ● ○ ●
1 UNIT Switching unit**180 x 180 x 111 mm ○ ● ○
VA retaining bar with an overall
length of 996mm
● ● ●
980359 3 UNITS Heavy-duty anchor B8-4/60 A4 ● ● ●
980639 2 UNITS Pipe clamp PE DN40 ● ● ●
980156 6 UNITS
Nail dowel M6X40 V2A countersunk
head
● ● ●
980076 4 UNITS Cable tie 280/4.5 mm bl. ● ● ●
When assembling the hygienisation stage in an A cabinet, the following components
must be added.
Item no.: Quantity Description
981462 1 UNIT
Retaining plate for UV
switching device
909006
UV module S50
with pump
909007
UV module
S50
without pump
909008
UV module S80
with pump
● ● ●
980551 8 UNITS Screws M5x12 ● ● ●
980011 8 UNITS Hexagonal nut M5 ● ● ●
980612 4 UNITS Drill screw 4.2 x 19 ● ● ●
980003 4 UNITS Washer D 6.4 ● ● ●
○ Not included in the scope of delivery● Included in the scope of delivery
* The pump is delivered together with a connection cable YSLY-JB 3x 1 mm² with a length of 18 m.
** The switching unit is delivered together with a connection cable YSLY-JB 3x 1 mm² with a length
of 2.5 m.
KLARO GmbH 7