Harmer Floor & Shower Drains Oct 14-file045956
Harmer Floor & Shower Drains Oct 14-file045956
Harmer Floor & Shower Drains Oct 14-file045956
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Stainless Steel <strong>Floor</strong> Outlets - Application Details<br />
Standard Vertical One-Part Fixed Height Drain Body with<br />
Square Anti-Slip Mesh Grate<br />
Tiled flooring bedded in adhesive<br />
Anti-Slip Mesh Grate<br />
Screed<br />
Waste Basket<br />
Standard Vertical One-Part Fixed Height Drain Body<br />
Removable odour trap (50mm water seal)<br />
Concrete floor<br />
Proprietary coupling<br />
110mm dia pipe<br />
Insulation on sand blinding on hardcore<br />
Sitework<br />
1. Position drain pipe to align with drain body. Ensure drain body is set to required FFL height.<br />
2. Join with proprietary coupling.<br />
6<br />
5<br />
4<br />
3. Once hardcore, sand blinding and insulation are installed, pour concrete mix.<br />
4. Lay screed to falls.<br />
5. Apply adhesive and fit tiles.<br />
3<br />
6. Fit Anti-Slip Mesh Grate<br />
2<br />
1<br />
74<br />
www.harmerdrainage.co.uk
Change language