Risk Management Plan - FAACO - Federal Aviation Administration ...

101 requirements and with at least a two (2) hour fire
resistive rating. All related material and construction
shall have an equivalent fire resistive rating.
(ii) Shafts for elevators shall conform to the
requirements of the American Standard Safety Code for
Elevators, Escalators, and Dumbwaiters (ANSI A17.1)
(iii) Shaft openings must be constructed in accordance
with FNPA-101, 6-2.4.
(4) Fire Walls, Partitions, and Fire Stops. Must be
constructed and used in accordance with NFPA-101, 6-2.
(e) Fire Detection and Alarm Systems. Each ATCT must
be provided with a fire detection and alarm system in
accordance with 29 CFR 1910.164 and 1910.165.
(f) Fire Suppression Equipment. Suitable fire
suppression equipment must be available in accordance with
29 CFR 1910.157. Extinguishers shall not be considered to
be equivalent to an automatic sprinkler system for purposes
of omitting the requirement for protected noncombustible
construction required by this standard.
(g) Compliance Program.
(1) The FAA shall establish, within one hundred and
eighty (180) days of the effective date of this standard, a
written program describing the alternative selected from
paragraph (c) above to be used to comply with this standard.
(3) The written program shall include the following:
(i) The alternative provisions selected for exit
routes;
(ii) A description of the worksite and the
modifications to be made to comply with this provision;
(iii)Engineering plans and studies used to determine
methods selected for achieving compliance with this
provision;
(iv) A detailed schedule for implementation of the
provisions; and
(v) Other relevant information.
20