Reference Manual - LYNX Technik AG

Control Mode
Page 32 of 52
P IE 5810 Reference Manual. Rev 2.6
The converter can be automatically controlled by AFD, WSS or VI. Selection is made
from the drop down box. Depending on what codes are detected in the input signal and
the converted output format; the down converters are automatically preset for this mode
of operation.
Inserted Format Description
With the three checkboxes you can select what type of format description will be inserted
into the video signal as metadata. This information is derived from the settings made to
the converter. If there was already metadata of this type inserted in the input signal they
will be overwritten (if the related checkbox is selected).
NOTE: If the checkbox is not selected then no data will be inserted and any existing data
will be blanked