BAYPREG Brosch GB neu_A4.fh11 - BaySystems - customized ...

More documents

Recommendations

Info

14 2-comp. metering/spraying unit - Baypreg ® systems are normally processed with fiber materials by compression molding. This requires a heatable mold made of aluminum or steel, capable of resisting a clamping pressure of 5 bar. Spraying Compression molding EVERYTHING IS POSSIBLE... - The <strong>BAYPREG</strong> ® components can be metered and mixed manually or processed on an industrial scale on 2-component polyurethane machines. The ready-to-use polyurethane system is then applied to one or both sides of the fiber material by pouring or spraying.
Opening - The fiber material is cut to size and placed in the mold, which may be treated with release agent. - If the fiber mat is treated outside the heated mold, open times of up to 45 minutes at room temperature (20 – 23 °C) are possible. Closing the heated mold triggers the forming and curing process. THE VARIABLE POLYURETHANE COMPOSITE SYSTEM Compression molding time as a function of temperature Formtemperatur (°C) 120 100 80 65 Molding time (min) 2 - 3 4 - 5 6 - 8 12 - 13 Further processing 15
Page 1 and 2: - NO LIMIT - A TOUGH LIGHTWEIGHT FO
Page 3 and 4: CONTENTS 4 Baypreg ® , the future-
Page 5 and 6: Baypreg ® , in this case Baypreg
Page 7 and 8: Baypreg ® parts reinforced with na
Page 9 and 10: A MATERIAL WITH MANY FACES Baypreg
Page 11 and 12: Free of solvents Because Baypreg ®
Page 13: 10 4 8 6 4 2 10 3 8 6 4 2 10 2 8 6
Page 17 and 18: • AN ALLIANCE WITH NATURE - FOR T
Page 20: This information and our technical

BAYPREG Brosch GB neu_A4.fh11 - BaySystems - customized ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?