Ceramic Trimmer Capacitors - Murata

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.
T13E.pdf
Nov.22,2013
c Temperature Characteristics
TZW4Z1R5
Z1R5 (NP0±150 ppm/°C)
c Frequency Characteristics
TZW4Z1R5
Z1R5
Cap.Change (%)
+8
+6
+4
1000
+2
0
Temp. (°C)
–55 –25 –10 0
20
–2
45 65 85
–4
105 125
100
1.5pF set
–6
–8
Q
–10
–12
10
1
500 1000 1500 2000 2500 3000
Frequency (MHz)
c Land Pattern
7.0
4.4
2.5
Tolerance: ±0.1
in mm
6
c Temperature Profile
Reflow Soldering Profile
qSoldering profile for Lead-free solder (96.5Sn/3Ag/0.5Cu)
Temperature (°C)
T1
T3
T2
t2
t3
T5
T4
Limit Profile
Standard Profile
wSoldering profile for Eutectic solder (63Sn/37Pb)
(Limit profile: refer to q)
Temperature (°C)
T3
T2
T1
t2
Standard Profile
t1
time (s)
t1
time (s)
Standard Profile
Pre-heating Heating Peak
temperature
Temp. (T1) Time (t1) Temp. (T2) Time (t2) (T3)
150 to 180°C 60 to 120sec. 220°C 30 to 60sec. 245±3°C
Cycle
of reflow
2 times
Standard Profile
Pre-heating Heating Peak Cycle
temperature
Temp. (T1) Time (t1) Temp. (T2) Time (t2) (T3) of reflow
150°C 60 to 120sec. 183°C 30sec. 230 +5/-0°C 1 time
Limit Profile
Pre-heating Heating Peak
Cycle
temperature
Temp. (T1) Time (t1) Temp. (T4) Time (t3) (T5) of reflow
150 to 180°C 60 to 120sec. 230°C 30 to 50sec. 260 +5/-0°C 2 times
Soldering Iron
Standard Profile
Temperature of soldering iron tip Soldering time Soldering iron power output
Cycle of soldering iron
350±10°C 3sec. max. 30W max. 1 time
25