British Aerospace Hawk Mk. 51 Construction Guide - Velocity-RC.com
British Aerospace Hawk Mk. 51 Construction Guide - Velocity-RC.com
British Aerospace Hawk Mk. 51 Construction Guide - Velocity-RC.com
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
BAe <strong>Hawk</strong> <strong>Mk</strong>. <strong>51</strong> : 70mm Sport Jet<br />
<strong>Construction</strong> <strong>Guide</strong> v1.3<br />
4 Sand the inside lower edges of the vertical fin and glue it on with slow cure epoxy and filler. Apply<br />
epoxy to the root outline on the fuse (including the sidewalls of the ply former) and the sides of the spar.<br />
5 Clean up excess epoxy.<br />
6 Align vertically and tape in place as shown. Let fully cure.<br />
Page 13 of 47
Change language