British Aerospace Hawk Mk. 51 Construction Guide - Velocity-RC.com
British Aerospace Hawk Mk. 51 Construction Guide - Velocity-RC.com
British Aerospace Hawk Mk. 51 Construction Guide - Velocity-RC.com
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
BAe <strong>Hawk</strong> <strong>Mk</strong>. <strong>51</strong> : 70mm Sport Jet<br />
<strong>Construction</strong> <strong>Guide</strong> v1.3<br />
Retractable Landing Gear: Main Gear Install<br />
1 Look at the image below to see where the center of your struts should be with the gear in the down<br />
position.<br />
2 Place a protective layer of masking tape on the underside of the wing in the general locations of the strut<br />
centers.<br />
3 Place the retract bases at the noted locations using the strut centers as your reference point and trace the<br />
outline of the retract bases onto the wing.<br />
4 Align the supplied wheel well template with your previous tracing and trace the well outline onto the<br />
wing.<br />
Page 37 of 47